genesys: Improve motor tables on 8400F

merge-requests/340/head
Povilas Kanapickas 2020-02-01 14:23:01 +02:00
rodzic 6d15a0da5a
commit 0b75ffdf36
2 zmienionych plików z 38 dodań i 5 usunięć

Wyświetl plik

@ -791,6 +791,16 @@ void CommandSetGl843::set_fe(Genesys_Device* dev, const Genesys_Sensor& sensor,
}
}
static bool should_use_new_fast_table(const Genesys_Device& dev)
{
switch (dev.model->model_id) {
case ModelId::CANON_8600F:
case ModelId::CANON_8400F:
return true;
default:
return false;
}
}
static void gl843_init_motor_regs_scan(Genesys_Device* dev,
const Genesys_Sensor& sensor,
@ -871,7 +881,7 @@ static void gl843_init_motor_regs_scan(Genesys_Device* dev,
reg->set8(REG_STEPNO, scan_table.steps_count / step_multiplier);
reg->set8(REG_FASTNO, scan_table.steps_count / step_multiplier);
if (dev->model->model_id == ModelId::CANON_8600F) {
if (should_use_new_fast_table(*dev)) {
// FIXME: move all models to the 8600F behavior
gl843_send_slope_table(dev, STOP_TABLE, scan_table.table, scan_table.steps_count);
reg->set8(REG_FSHDEC, scan_table.steps_count / step_multiplier);
@ -885,7 +895,7 @@ static void gl843_init_motor_regs_scan(Genesys_Device* dev,
MotorSlopeTable fast_table;
if (dev->model->model_id == ModelId::CANON_8600F) {
if (should_use_new_fast_table(*dev)) {
fast_table = create_slope_table_fastest(dev->model->asic_type, step_multiplier,
*fast_profile);
} else {
@ -895,7 +905,7 @@ static void gl843_init_motor_regs_scan(Genesys_Device* dev,
*fast_profile);
}
if (dev->model->model_id != ModelId::CANON_8600F) {
if (!should_use_new_fast_table(*dev)) {
// FIXME: move all models to the 8600F behavior
gl843_send_slope_table(dev, STOP_TABLE, fast_table.table, fast_table.steps_count);
reg->set8(REG_FSHDEC, fast_table.steps_count / step_multiplier);

Wyświetl plik

@ -254,8 +254,31 @@ void genesys_init_motor_tables()
motor.id = MotorId::CANON_8400F;
motor.base_ydpi = 1600;
motor.optical_ydpi = 6400;
motor.profiles.push_back({MotorSlope::create_from_steps(8743, 300, 794),
StepType::QUARTER, 50000});
profile = MotorProfile();
profile.slope = MotorSlope::create_from_steps(20202 * 4, 900 * 4, 50);
profile.step_type = StepType::QUARTER;
profile.motor_vref = 0;
profile.resolutions = ResolutionFilter::ANY;
profile.scan_methods = { ScanMethod::FLATBED };
motor.profiles.push_back(std::move(profile));
profile = MotorProfile();
profile.slope = MotorSlope::create_from_steps(65535 * 4, 900 * 4, 100);
profile.step_type = StepType::QUARTER;
profile.motor_vref = 2;
profile.resolutions = ResolutionFilter::ANY;
profile.scan_methods = { ScanMethod::TRANSPARENCY, ScanMethod::TRANSPARENCY_INFRARED };
motor.profiles.push_back(std::move(profile));
profile = MotorProfile();
profile.slope = MotorSlope::create_from_steps(65535 * 4, 333 * 4, 200);
profile.step_type = StepType::QUARTER;
profile.motor_vref = 2;
profile.resolutions = ResolutionFilter::ANY;
profile.scan_methods = ScanMethodFilter::ANY;
motor.fast_profiles.push_back(std::move(profile));
s_motors->push_back(std::move(motor));