sane-project-backends/README.windows

60 wiersze
1.5 KiB
Plaintext
Czysty Zwykły widok Historia

2003-09-24 03:41:48 +00:00
SANE on Cygwin/Win32
Prerequisites
=============
2004-04-12 12:32:22 +00:00
To be able to compile sane-backends, you need to have Cygwin installed,
with at least the following package(s):
2003-09-24 03:41:48 +00:00
- gcc
You can get Cygwin at http://sources.redhat.com/cygwin/
The scanner must be detected by Windows and not be disabled. Check
with the hardware manager.
2004-04-12 12:32:22 +00:00
Building
========
See general README for build basics. The autoconf script (configure) checks
for C++ compilers and misdetects CC (=cc = gcc) a a c++ compiler because of
the case-insensitive filesystem. If that happens, one work-around will be to
install a real C++ compiler.
2003-09-24 03:41:48 +00:00
Scanning
========
If you have more than one scanner, you should do the following:
- run sane-find-scanner to get the device name of the scanner. The
name is something like h0b0t6l0, meaning hba 0, bus 0, scsi id 6 and
lun 0.
- edit the config file for the backend
(/usr/local/etc/sane.d/xxxx.conf) and add the scanner device name on
an empty line.
Run "scanimage > out.pnm" to get a scan.
2003-09-26 01:38:01 +00:00
xscanimage and XSane also work. xscanimage compiles and runs out of
the box. XSane 0.92 needs a couple build fixes.
2003-09-24 03:41:48 +00:00
2004-02-08 15:28:20 +00:00
Notes
=====
2003-09-24 03:41:48 +00:00
2004-02-08 15:28:20 +00:00
- Only SCSI and USB (with libusb-win32) scanners may work. No
FireWire/Parallel. The Cygwin libusb port is at
http://sourceforge.net/projects/libusb-win32.
2003-09-24 03:41:48 +00:00
2004-02-08 15:28:20 +00:00
- Tested on Windows 2000 only. Should work on Windows NT/XP too;
may or may not work on Windows 95/98/ME.
2003-09-24 03:41:48 +00:00
2004-02-08 15:28:20 +00:00
- Some scanners' backend may not work because of requirement not
supported by Cygwin.
2004/02/07
2003-09-24 03:41:48 +00:00
Frank Zago.