sane-project-backends/doc/descriptions/gt68xx.desc

:backend "gt68xx"
:status :beta
:version "1.0-35"
:new :yes
:manpage "sane-gt68xx"
:url "http://www.meier-geinitz.de/sane/gt68xx-backend/"
:comment "Only the USB scanners mentioned below are supported. For other Mustek BearPaws, look at the Plustek backend."
:devicetype :scanner

:mfg "Mustek"
:url "http://www.mustek.com/"
:url "http://www.mustek.com.tw/"
:url "http://www.mustek.de/"

:model "BearPaw 1200 CS"
:interface "USB"
:status :beta

:model "BearPaw 1200 CU"
:interface "USB"
:status :beta

:model "BearPaw 1200 CU Plus"
:interface "USB"
:status :beta

:model "BearPaw 1200 TA"
:interface "USB"
:status :beta
:comment "Transparency adapter supported"

:model "BearPaw 2400 CS"
:interface "USB"
:status :untested
:comment "probably works, reports are welcome"

:model "BearPaw 2400 CS Plus"
:interface "USB"
:status :untested
:comment "probably works, reports are welcome"

:model "BearPaw 2400 CU"
:interface "USB"
:status :alpha
:comment "works, but is slow""

:model "BearPaw 2400 CU Plus"
:interface "USB"
:status :beta

:model "BearPaw 2400 TA"
:interface "USB"
:status :beta
:comment "Transparency adapter supported"

:model "BearPaw 2400 TA Plus"
:interface "USB"
:status :beta
:comment "Transparency adapter supported"

:model "ScanExpress 1200 UB Plus"
:interface "USB"
:status :beta

:model "ScanExpress A3 USB"
:interface "USB"
:status :alpha
:comment "Basically works but margins are not correct. More reports welcome."

:model "ScanExpress 2400 USB"
:interface "USB"
:status :untested
:comment "Should be detected but may need some more work in the code. Testers welcome."

:mfg "Plustek"
:url "http://www.plustek.de/"
:url "http://www.plustek.com/"

:model "OpticPro 1248U"
:interface "USB"
:status :beta
:comment "Works up to 600 dpi"

:model "OpticPro UT16B"
:interface "USB"
:status :untested
:comment "Isn't detected yet but may work some time in future. Testers welcome."

:mfg "Artec"
:url "http://www.artecusa.com/"

:model "Ultima 2000"
:status :beta
:interface "USB"
:comment "works, only product id 0x4002 is supported"

:model "Ultima 2000 e+"
:status :untested
:interface "USB"
:comment "Testers welcome"

:mfg "Boeder"
:model "Sm@rtScan Slim Edition"
:status :beta
:interface "USB"
:comment "similar to Artec Ultima 2000"

:mfg "Packard Bell"
:model "Diamond 1200"
:status :beta
:interface "USB"
:comment "similar to Mustek BearPaw 1200 Plus"

:mfg "Medion/Lifetec/Tevion/Cytron"
:url "http://www.medion.com"
:comment "Sold by Aldi and Tchibo"

:model "LT 9452"
:status :beta
:interface "USB"
:comment "Simlar to Mustek ScanExpress 1200 UB Plus"

:model "MD/LT 9385"
:status :beta
:interface "USB"
:comment "Similar to Artec Ultima 2000"

:model "MD 9458"
:status :beta
:interface "USB"
:comment "Similar to Artec Ultima 2000 (e+?)"

:mfg "Trust"
:url "http://www.trust-site.com"

:model "Flat Scan USB 19200"
:status :beta
:interface "USB"
:comment "Similar to Artec Ultima 2000"

:model "Compact Scan USB 19200"
:status :beta
:interface "USB"
:comment "works, if you have vendor id 0x055f and product id 0x0006, use the mustek_usb backend instead, similar to Mustek ScanExpress 1200 UB (Plus)"

:mfg "Lexmark"
:url "http://www.lexmark.com/"
:model "X70"
:status :alpha
:interface "USB"
:comment "works, but sometimes the image brightness changes with resolution"

:model "X73"
:status :alpha
:interface "USB"
:comment "should work like the X70, but was reported to fail, more reports welcome"

:mfg "Genius"
:url "http://www.genius-kye.com/"

:model "Colorpage Vivid3x"
:status :untested
:interface "USB"
:comment "Not detected yet but should work when code is added"
Added gt68xx information. 2002-09-16 12:49:46 +00:00			`:backend "gt68xx"`
Added basic support for Plustek OpticPro 1248U (from Gerhard Jaeger <gerhard@gjaeger.de>). Removed 50 and 1200 dpi from Lexmark X73. Backend status is BETA now. 2002-11-13 17:45:24 +00:00			`:status :beta`
Updated ScanExpress 2400 USB values. Added implementation of gt6801 lamp control for CCD scanners. Added flag for SE 2400 USB, added some quirks in gt68xx_gt6801.c. Fixed gt68xx_gt6801 -> lamp control. Adjusted Plustek 1248U geometry and afe values. CCD gross calibration changed: start with the default value from module struct. Is faster now for most cases. Only 2.5 mm of calibration for GT-6801 scanners. Added "afe" option for gt68xx.conf for selecting default afe values. Removed AFE and exposure SANE options. Added documentation for afe option in gt68xx.conf. New version: 1.0-35. 2002-12-30 13:05:24 +00:00			`:version "1.0-35"`
Coarse calibration for first scan only" is off by default now. Added gamma table factor option (SANE_CAP_EMULATED). Setup gamma to 2.0 by default. Fixed (hopefully) sigpipe when cancelling. No geometry quantization anymore (not necessary). Plustek 1248U: do linemode for every resolution, fix color correction. Added comments for every Model member in gt68xx_devices. Added Plustek UT16B and Genius Vivid3x to .desc. Added implementation for inverted offset for CCD scanners. Added Mustek ScanExpress 2400 USB. Well, at least it's detected. Added NEW marker to .desc. 2002-12-08 21:00:31 +00:00			`:new :yes`
Added documentation for gt68xx backend. 2002-10-25 12:19:34 +00:00			`:manpage "sane-gt68xx"`
Added gt68xx information. 2002-09-16 12:49:46 +00:00			`:url "http://www.meier-geinitz.de/sane/gt68xx-backend/"`
Added new scanners. Updated status of supported scanners. 2002-10-01 15:30:19 +00:00			`:comment "Only the USB scanners mentioned below are supported. For other Mustek BearPaws, look at the Plustek backend."`
Added gt68xx information. 2002-09-16 12:49:46 +00:00			`:devicetype :scanner`

			`:mfg "Mustek"`
			`:url "http://www.mustek.com/"`
			`:url "http://www.mustek.com.tw/"`
			`:url "http://www.mustek.de/"`

Added new scanners. Updated status of supported scanners. 2002-10-01 15:30:19 +00:00			`:model "BearPaw 1200 CS"`
Added gt68xx information. 2002-09-16 12:49:46 +00:00			`:interface "USB"`
Added documentation for gt68xx backend. 2002-10-25 12:19:34 +00:00			`:status :beta`
Added gt68xx information. 2002-09-16 12:49:46 +00:00
			`:model "BearPaw 1200 CU"`
			`:interface "USB"`
Updated status of scanners. 2002-10-23 13:57:12 +00:00			`:status :beta`
Added gt68xx information. 2002-09-16 12:49:46 +00:00
Added new scanners. Updated status of supported scanners. 2002-10-01 15:30:19 +00:00			`:model "BearPaw 1200 CU Plus"`
Added gt68xx information. 2002-09-16 12:49:46 +00:00			`:interface "USB"`
Changed option titles and descriptions to make them better readable. Added translation markers for all options. Added German translation for backend options. Updated manpage and .desc file concerning scanner status. Added untested flag for Mustek ScanEpress A3 USB and Lexmark X73. 2002-11-07 12:50:19 +00:00			`:status :beta`
Added some untested scanners. Updated Mustek entries. 2002-09-23 15:04:33 +00:00
			`:model "BearPaw 1200 TA"`
			`:interface "USB"`
Updated status of scanners. 2002-10-23 13:57:12 +00:00			`:status :beta`
Added documentation for gt68xx backend. 2002-10-25 12:19:34 +00:00			`:comment "Transparency adapter supported"`
Added gt68xx information. 2002-09-16 12:49:46 +00:00
Added new scanners. Updated status of supported scanners. 2002-10-01 15:30:19 +00:00			`:model "BearPaw 2400 CS"`
			`:interface "USB"`
			`:status :untested`
Updated status of scanners. 2002-10-23 13:57:12 +00:00			`:comment "probably works, reports are welcome"`
Added new scanners. Updated status of supported scanners. 2002-10-01 15:30:19 +00:00
			`:model "BearPaw 2400 CS Plus"`
Added gt68xx information. 2002-09-16 12:49:46 +00:00			`:interface "USB"`
			`:status :untested`
Updated status of scanners. 2002-10-23 13:57:12 +00:00			`:comment "probably works, reports are welcome"`
Added new scanners. Updated status of supported scanners. 2002-10-01 15:30:19 +00:00
			`:model "BearPaw 2400 CU"`
			`:interface "USB"`
			`:status :alpha`
Updated status of scanners. 2002-10-23 13:57:12 +00:00			`:comment "works, but is slow""`
Added new scanners. Updated status of supported scanners. 2002-10-01 15:30:19 +00:00
			`:model "BearPaw 2400 CU Plus"`
			`:interface "USB"`
Changed option titles and descriptions to make them better readable. Added translation markers for all options. Added German translation for backend options. Updated manpage and .desc file concerning scanner status. Added untested flag for Mustek ScanEpress A3 USB and Lexmark X73. 2002-11-07 12:50:19 +00:00			`:status :beta`
Added gt68xx information. 2002-09-16 12:49:46 +00:00
			`:model "BearPaw 2400 TA"`
			`:interface "USB"`
Updated status of scanners. 2002-10-23 13:57:12 +00:00			`:status :beta`
Added documentation for gt68xx backend. 2002-10-25 12:19:34 +00:00			`:comment "Transparency adapter supported"`
Added gt68xx information. 2002-09-16 12:49:46 +00:00
			`:model "BearPaw 2400 TA Plus"`
			`:interface "USB"`
Updated status of scanners. 2002-10-23 13:57:12 +00:00			`:status :beta`
Added documentation for gt68xx backend. 2002-10-25 12:19:34 +00:00			`:comment "Transparency adapter supported"`
Added new scanners. Updated status of supported scanners. 2002-10-01 15:30:19 +00:00
			`:model "ScanExpress 1200 UB Plus"`
			`:interface "USB"`
Updated status of scanners. 2002-10-23 13:57:12 +00:00			`:status :beta`

			`:model "ScanExpress A3 USB"`
			`:interface "USB"`
Changed 150 to 200 dpi for Mustek BearPaw 2400 TA. Fixed warnings in gt68xx_low.c. Used DBG instead of XDBG ing gt68xx_low.c. Minor manpage fixes. Added man page links to other backends. gt68xx_low.h: Fixed __FUNCTION__ bug on non-gcc compilers. Added more details about the BSDs in the manpage. Fixed color order for ScanExpress A3 USB. 2002-11-21 22:09:16 +00:00			`:status :alpha`
			`:comment "Basically works but margins are not correct. More reports welcome."`
Updated status of scanners. 2002-10-23 13:57:12 +00:00
Coarse calibration for first scan only" is off by default now. Added gamma table factor option (SANE_CAP_EMULATED). Setup gamma to 2.0 by default. Fixed (hopefully) sigpipe when cancelling. No geometry quantization anymore (not necessary). Plustek 1248U: do linemode for every resolution, fix color correction. Added comments for every Model member in gt68xx_devices. Added Plustek UT16B and Genius Vivid3x to .desc. Added implementation for inverted offset for CCD scanners. Added Mustek ScanExpress 2400 USB. Well, at least it's detected. Added NEW marker to .desc. 2002-12-08 21:00:31 +00:00			`:model "ScanExpress 2400 USB"`
			`:interface "USB"`
			`:status :untested`
			`:comment "Should be detected but may need some more work in the code. Testers welcome."`
Updated Mustek information. Added Plustek OpticPro 1248U. 2002-09-17 20:56:36 +00:00
			`:mfg "Plustek"`
			`:url "http://www.plustek.de/"`
			`:url "http://www.plustek.com/"`

			`:model "OpticPro 1248U"`
			`:interface "USB"`
Updated ScanExpress 2400 USB values. Added implementation of gt6801 lamp control for CCD scanners. Added flag for SE 2400 USB, added some quirks in gt68xx_gt6801.c. Fixed gt68xx_gt6801 -> lamp control. Adjusted Plustek 1248U geometry and afe values. CCD gross calibration changed: start with the default value from module struct. Is faster now for most cases. Only 2.5 mm of calibration for GT-6801 scanners. Added "afe" option for gt68xx.conf for selecting default afe values. Removed AFE and exposure SANE options. Added documentation for afe option in gt68xx.conf. New version: 1.0-35. 2002-12-30 13:05:24 +00:00			`:status :beta`
			`:comment "Works up to 600 dpi"`
Added some untested scanners. Updated Mustek entries. 2002-09-23 15:04:33 +00:00
Coarse calibration for first scan only" is off by default now. Added gamma table factor option (SANE_CAP_EMULATED). Setup gamma to 2.0 by default. Fixed (hopefully) sigpipe when cancelling. No geometry quantization anymore (not necessary). Plustek 1248U: do linemode for every resolution, fix color correction. Added comments for every Model member in gt68xx_devices. Added Plustek UT16B and Genius Vivid3x to .desc. Added implementation for inverted offset for CCD scanners. Added Mustek ScanExpress 2400 USB. Well, at least it's detected. Added NEW marker to .desc. 2002-12-08 21:00:31 +00:00			`:model "OpticPro UT16B"`
			`:interface "USB"`
			`:status :untested`
Updated ScanExpress 2400 USB values. Added implementation of gt6801 lamp control for CCD scanners. Added flag for SE 2400 USB, added some quirks in gt68xx_gt6801.c. Fixed gt68xx_gt6801 -> lamp control. Adjusted Plustek 1248U geometry and afe values. CCD gross calibration changed: start with the default value from module struct. Is faster now for most cases. Only 2.5 mm of calibration for GT-6801 scanners. Added "afe" option for gt68xx.conf for selecting default afe values. Removed AFE and exposure SANE options. Added documentation for afe option in gt68xx.conf. New version: 1.0-35. 2002-12-30 13:05:24 +00:00			`:comment "Isn't detected yet but may work some time in future. Testers welcome."`
Coarse calibration for first scan only" is off by default now. Added gamma table factor option (SANE_CAP_EMULATED). Setup gamma to 2.0 by default. Fixed (hopefully) sigpipe when cancelling. No geometry quantization anymore (not necessary). Plustek 1248U: do linemode for every resolution, fix color correction. Added comments for every Model member in gt68xx_devices. Added Plustek UT16B and Genius Vivid3x to .desc. Added implementation for inverted offset for CCD scanners. Added Mustek ScanExpress 2400 USB. Well, at least it's detected. Added NEW marker to .desc. 2002-12-08 21:00:31 +00:00
Updated status of scanners. 2002-10-23 13:57:12 +00:00			`:mfg "Artec"`
Added some untested scanners. Updated Mustek entries. 2002-09-23 15:04:33 +00:00			`:url "http://www.artecusa.com/"`

Updated status of scanners. 2002-10-23 13:57:12 +00:00			`:model "Ultima 2000"`
Added documentation for gt68xx backend. 2002-10-25 12:19:34 +00:00			`:status :beta`
Added some untested scanners. Updated Mustek entries. 2002-09-23 15:04:33 +00:00			`:interface "USB"`
Updated status of scanners. 2002-10-23 13:57:12 +00:00			`:comment "works, only product id 0x4002 is supported"`
Added some untested scanners. Updated Mustek entries. 2002-09-23 15:04:33 +00:00
Added documentation for gt68xx backend. 2002-10-25 12:19:34 +00:00			`:model "Ultima 2000 e+"`
			`:status :untested`
			`:interface "USB"`
			`:comment "Testers welcome"`

Added some untested scanners. Updated Mustek entries. 2002-09-23 15:04:33 +00:00			`:mfg "Boeder"`
			`:model "Sm@rtScan Slim Edition"`
Added documentation for gt68xx backend. 2002-10-25 12:19:34 +00:00			`:status :beta`
Added some untested scanners. Updated Mustek entries. 2002-09-23 15:04:33 +00:00			`:interface "USB"`
Added documentation for gt68xx backend. 2002-10-25 12:19:34 +00:00			`:comment "similar to Artec Ultima 2000"`
Added some untested scanners. Updated Mustek entries. 2002-09-23 15:04:33 +00:00
			`:mfg "Packard Bell"`
			`:model "Diamond 1200"`
Added documentation for gt68xx backend. 2002-10-25 12:19:34 +00:00			`:status :beta`
Added some untested scanners. Updated Mustek entries. 2002-09-23 15:04:33 +00:00			`:interface "USB"`
Added documentation for gt68xx backend. 2002-10-25 12:19:34 +00:00			`:comment "similar to Mustek BearPaw 1200 Plus"`
Added some untested scanners. Updated Mustek entries. 2002-09-23 15:04:33 +00:00
Updated status of scanners. 2002-10-23 13:57:12 +00:00			`:mfg "Medion/Lifetec/Tevion/Cytron"`
			`:url "http://www.medion.com"`
			`:comment "Sold by Aldi and Tchibo"`
Added some untested scanners. Updated Mustek entries. 2002-09-23 15:04:33 +00:00
			`:model "LT 9452"`
Added documentation for gt68xx backend. 2002-10-25 12:19:34 +00:00			`:status :beta`
Added some untested scanners. Updated Mustek entries. 2002-09-23 15:04:33 +00:00			`:interface "USB"`
Added documentation for gt68xx backend. 2002-10-25 12:19:34 +00:00			`:comment "Simlar to Mustek ScanExpress 1200 UB Plus"`
Updated status of scanners. 2002-10-23 13:57:12 +00:00
			`:model "MD/LT 9385"`
Added documentation for gt68xx backend. 2002-10-25 12:19:34 +00:00			`:status :beta`
Added some untested scanners. Updated Mustek entries. 2002-09-23 15:04:33 +00:00			`:interface "USB"`
Added documentation for gt68xx backend. 2002-10-25 12:19:34 +00:00			`:comment "Similar to Artec Ultima 2000"`
Updated status of scanners. 2002-10-23 13:57:12 +00:00
			`:model "MD 9458"`
Added documentation for gt68xx backend. 2002-10-25 12:19:34 +00:00			`:status :beta`
Updated status of scanners. 2002-10-23 13:57:12 +00:00			`:interface "USB"`
Added documentation for gt68xx backend. 2002-10-25 12:19:34 +00:00			`:comment "Similar to Artec Ultima 2000 (e+?)"`
Added some untested scanners. Updated Mustek entries. 2002-09-23 15:04:33 +00:00
			`:mfg "Trust"`
Added new scanners. Updated status of supported scanners. 2002-10-01 15:30:19 +00:00			`:url "http://www.trust-site.com"`
Updated status of scanners. 2002-10-23 13:57:12 +00:00
Added some untested scanners. Updated Mustek entries. 2002-09-23 15:04:33 +00:00			`:model "Flat Scan USB 19200"`
Added documentation for gt68xx backend. 2002-10-25 12:19:34 +00:00			`:status :beta`
Added some untested scanners. Updated Mustek entries. 2002-09-23 15:04:33 +00:00			`:interface "USB"`
Added documentation for gt68xx backend. 2002-10-25 12:19:34 +00:00			`:comment "Similar to Artec Ultima 2000"`
Updated Mustek information. Added Plustek OpticPro 1248U. 2002-09-17 20:56:36 +00:00
Updated status of scanners. 2002-10-23 13:57:12 +00:00			`:model "Compact Scan USB 19200"`
Changed option titles and descriptions to make them better readable. Added translation markers for all options. Added German translation for backend options. Updated manpage and .desc file concerning scanner status. Added untested flag for Mustek ScanEpress A3 USB and Lexmark X73. 2002-11-07 12:50:19 +00:00			`:status :beta`
Updated status of scanners. 2002-10-23 13:57:12 +00:00			`:interface "USB"`
Added documentation for gt68xx backend. 2002-10-25 12:19:34 +00:00			`:comment "works, if you have vendor id 0x055f and product id 0x0006, use the mustek_usb backend instead, similar to Mustek ScanExpress 1200 UB (Plus)"`
Updated status of scanners. 2002-10-23 13:57:12 +00:00
Added new scanners. Updated status of supported scanners. 2002-10-01 15:30:19 +00:00			`:mfg "Lexmark"`
			`:url "http://www.lexmark.com/"`
			`:model "X70"`
			`:status :alpha`
			`:interface "USB"`
Added basic support for Plustek OpticPro 1248U (from Gerhard Jaeger <gerhard@gjaeger.de>). Removed 50 and 1200 dpi from Lexmark X73. Backend status is BETA now. 2002-11-13 17:45:24 +00:00			`:comment "works, but sometimes the image brightness changes with resolution"`
Added new scanners. Updated status of supported scanners. 2002-10-01 15:30:19 +00:00
			`:model "X73"`
Added basic support for Plustek OpticPro 1248U (from Gerhard Jaeger <gerhard@gjaeger.de>). Removed 50 and 1200 dpi from Lexmark X73. Backend status is BETA now. 2002-11-13 17:45:24 +00:00			`:status :alpha`
Added new scanners. Updated status of supported scanners. 2002-10-01 15:30:19 +00:00			`:interface "USB"`
Added basic support for Plustek OpticPro 1248U (from Gerhard Jaeger <gerhard@gjaeger.de>). Removed 50 and 1200 dpi from Lexmark X73. Backend status is BETA now. 2002-11-13 17:45:24 +00:00			`:comment "should work like the X70, but was reported to fail, more reports welcome"`
Coarse calibration for first scan only" is off by default now. Added gamma table factor option (SANE_CAP_EMULATED). Setup gamma to 2.0 by default. Fixed (hopefully) sigpipe when cancelling. No geometry quantization anymore (not necessary). Plustek 1248U: do linemode for every resolution, fix color correction. Added comments for every Model member in gt68xx_devices. Added Plustek UT16B and Genius Vivid3x to .desc. Added implementation for inverted offset for CCD scanners. Added Mustek ScanExpress 2400 USB. Well, at least it's detected. Added NEW marker to .desc. 2002-12-08 21:00:31 +00:00
			`:mfg "Genius"`
			`:url "http://www.genius-kye.com/"`

			`:model "Colorpage Vivid3x"`
			`:status :untested`
			`:interface "USB"`
			`:comment "Not detected yet but should work when code is added"`