sane-project-backends/doc/sane-teco1.man

.TH sane\-teco1 5 "14 Jul 2008" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy"
.IX sane\-teco1
.SH NAME
sane\-teco1 \- SANE backend for TECO / RELISYS scanners
.SH DESCRIPTION
The
.B sane\-teco1
library implements a SANE (Scanner Access Now Easy) backend that
provides access to some TECO SCSI flatbed scanners. This backend
should be considered
.B beta-quality
software! TECO scanners are sold under
various brands like RELISYS, PIOTECH, TRUST. This backend may or
may not support yours.
.PP
The scanners that should work with this backend are:
.PP
.RS
.ft CR
.nf
   Vendor Model           TECO model      status
----------------------  --------------  -----------
  Relisys AVEC 2400        VM3520        tested  
  Relisys AVEC 2412        VM3520+       tested
  Relisys AVEC 4800        VM4530        untested  
  Relisys AVEC 4816        VM4530+       untested  
  Relisys RELI 2400        VM3530        untested  
  Relisys RELI 2412        VM3530+       tested
  Relisys RELI 2412        VM3530+       untested  
  Relisys RELI 4816        VM4540        tested  
  Relisys RELI 4830        VM4542        tested
  Relisys RELI 9600        VM6530        untested  
  Relisys RELI 9612        VM6530*       untested  
  Relisys RELI 9624        VM6530+       untested  
  Relisys RELI 9630        VM6540        untested  
  Relisys RELI DS15        VM3440        untested  
  Relisys RELI DS6         VM3420        untested  
  Dextra  DF-600P          VM3510        tested
  Dextra  DF-4830T         VM4542        untested
  Dextra  DF-1200T+        VM3530+       untested
  Dextra  DF-9624          VM6530+       untested
.fi
.ft R
.RE

Note that the untested scanner will not be directly supported. You
should contact the author for that.

The TECO VM number can usually be found at the back of the scanner. It
is also part of the FCC ID. "sane\-find\-scanner \-v" will also show the
scsi inquiry, and if it is a TECO scanner, the name will be there too.

The options the backend supports can either be selected through
command line options to programs like scanimage or through GUI
elements in xscanimage or xsane.

.br
If you have any success with a scanner not listed here, or if you have
any strange behavior, please report to the backend maintainer or to
the SANE mailing list.

Valid command line options and their syntax can be listed by using 
.RS
scanimage \-\-help \-d teco1
.RE

.TP
.B Scan Mode

.TP
.B \-\-mode
selects the basic mode of operation of the scanner valid choices are 
.I Black & White
,
.I Grayscale
and
.I Color
The Black & White mode is black and white only (1 bit). Grayscale
will produce 256 levels of gray (8 bits). Color will produce a 24 bits
color image.

.TP
.B \-\-resolution
selects the resolution for a scan. The scanner can do all resolutions
between 1 and 600, in increments of 1.


.TP
.B Geometry options

.TP
.B \-l \-t \-x \-y 
control the scan area: \-l sets the top left x coordinate, \-t the top
left y coordinate, \-x selects the width and \-y the height of the scan
area. All parameters are specified in millimeters by default.


.TP
.B Enhancement options

.TP
.B \-\-custom\-gamma
(color mode only) allows the user to specify a gamma table (see the
next 3 parameters).

.TP 
.B \-\-red\-gamma\-table 
(color mode only) can be used to download a user defined
gamma table for the red channel. The table must be 256 bytes long.

.TP 
.B \-\-green\-gamma\-table 
(color mode only) can be used to download a user defined
gamma table for the green channel. The table must be 256 bytes long.

.TP
.B \-\-blue\-gamma\-table 
(color mode only) can be used to download a user defined gamma table
for the blue channel. The table must be 256 bytes long.

.TP
.B \-\-dither
(Black & White only) select the dither mask to use. Possible values are 
.I Line art
,
.I 2x2
,
.I 3x3
,
.I 4x4 bayer
,
.I 4x4 smooth
,
.I 8x8 bayer
,
.I 8x8 smooth
,
.I 8x8 horizontal
and
.I 8x8 vertical


.TP 
.B \-\-preview
requests a preview scan. The resolution used for that scan is 22 dpi
and the scan area is the maximum allowed. The scan mode is user
selected. The default is "no".


.SH CONFIGURATION FILE
The configuration file @CONFIGDIR@/teco1.conf supports only one information: the device name to use (eg /dev/scanner).


.SH FILES
.TP
.I @LIBDIR@/libsane\-teco1.a
The static library implementing this backend.
.TP
.I @LIBDIR@/libsane\-teco1.so
The shared library implementing this backend (present on systems that
support dynamic loading).


.SH ENVIRONMENT
.TP
.B SANE_DEBUG_TECO1
If the library was compiled with debug support enabled, this
environment variable controls the debug level for this backend. E.g.,
a value of 128 requests all debug output to be printed. Smaller levels
reduce verbosity.


.SH LIMITATIONS
The windows TWAIN driver has many more options than this SANE
backend. However they are only software adjustments. This backend only
implements what the scanner can support.


.SH BUGS

None known.


.SH "SEE ALSO"

sane\-scsi(5), scanimage(1), xscanimage(1), xsane(1), sane(7)


.SH AUTHOR
.TP
The package is actively maintained by Frank Zago.
.I http://www.zago.net/sane/#teco

.SH CREDITS

Thanks to Gerard Delafond for the VM4542 support.
Thanks to Jean-Yves Simon for the VM3510 support.