sane-project-backends/ChangeLog

2001-05-14  Petter Reinholdtsen <pere@td.org.uit.no>

	* backend/lhii.desc: Updated with current version and contact
	  information.

	* frontend/scanimage.c tools/sane-find-scanner.c: Remove some
	  compiler warnings.

2001-05-13  Peter Fales <peter@fales.com>
	* backend/dc25.c: Remove DBG(0,...) line that was getting printed
	  for non-dc25 users.

2001-05-13  Karl Heinz Kremer <khk@khk.net>

	* backend/epson.c: Removed check for '\n' before end of line
          Free memory malloced in sane_get_devices() in sane_exit() again
          Check first if the scanner does support the set film type
          and set focus position before the GUI elements are displayed.
          This caused problems with older (B4 level) scanners when a TPU
          was connected.

2001-05-13  Henning Meier-Geinitz <henning@meier-geinitz.de>

	* doc/sane.man: Added path to sane.ps. Added comments about
	  how somebody can help the SANE project. Added comments about
	  possible problems with old installaitions of SANE and
	  /etc/ld.so.conf. Added section "REPORTING BUGS".
	* tools/Makefile.in tools/.cvsignore: Added mustek600iin-off.
	* sanei/sanei_codec_ascii.c tools/mustek600iin-off.c
	  tools/sane-find-scanner.c frontend/stiff.c: Used #include
	  "../include/sane/...".
	* backend/net.c backend/net.h backend/net.desc: Fixed some memory
	  leaks. A bit of reformating. Added more debug output. Used
	  #include "../include/sane/...".
	* sanei_codec_bin.c sanei/sanei_net.c sanei/sanei_wire.c: Fixed
	  some memory leaks. Used #include "../include/sane/...".
	* frontend/scanimage.c: Added exit handler to call sane_close
	  and sane_exit in any case and to free alloced memory. A bit of
	  reformating. Used #include "../include/sane/...". Fixed some
	  warnings.
	* frontend/saned.c: Fixed some memory leaks. Fixed some warnings.
	  Some reformating. Used #include "../include/sane/...".
	* README.hp-ux: Use gmake if make doesn't work.
	* LEVEL2: Added point about sane_init results != SANE_STATUS_GOOD.
	* TODO: Added entries about memory leaks, sane_init return values, and
	  HP-UX problems in isfdtype.c.

2001-05-11  Jochen Eisinger <jochen.eisinger@gmx.de>

	* TODO, backend/mustek_pp.c: fixed line-end handling, removed entry
	  from TODO list

2001-05-11  Henning Meier-Geinitz <henning@meier-geinitz.de>

	* TODO: Removed pie from lists of bugs. Removed sane manual page.
	  Added some context to the Tru64 problems.
	
2001-05-09  Henning Meier-Geinitz <henning@meier-geinitz.de>

	* doc/.cvsignore: Added sane.7.
	* README: Removed content that's now in the sane maual page.
	  Added reference to man sane.
	* doc/Makefile.in doc/sane.man: Added SANE manual page.
	* doc/sane.tex: Clarified the paragraph concerning sane_read. If
	  *len != 0 the status must be SANE_STATUS_GOOD.
	
2001-05-08  Simon Munton <simon@munton.demon.co.uk>
	* backend/pie.c: Free devlist in sane_exit. Removed redundant check for
	trailing newline in config file.

2001-05-07  Peter Fales <peter@fales.com>
	* backend/dc25.[ch]: Cleaned up compiler warnings and fixed (very
	  minor) memory leak.

2001-05-07  Oliver Rauch <Oliver.Rauch@rauch-domain.de>
	* applied a patch by Douglas Gilbert to sanei_scsi.c
          it solves the Problem that the scanner is not
          found on linux systems when the order of the
          scsi devices is not coverd by the order of
          devices listed by /proc/scsi/scsi, it prefers
          new kernel 2.4 methods when available

2001-05-06  Henning Meier-Geinitz <henning@meier-geinitz.de>

	* backend/mustek.c doc/mustek/mustek.CHANGES: Free devlist
	  in sane_exit.
	* TODO: Updated concerning config_line[len - 1] stuff. Added
	  some (most) backends to list of sane_get_devices leak.
	* backend/dll.c backend/dll.desc: Removed access to uninitialized
	  memory. Increased version number.
	* backend/net.c backend/net.desc: Removed access to uninitialized
	  memory. Changed htons to ntohs in DBG statement. Free devlist
	  in sane_exit. Use "../include/sane/...". Increased version number.

2001-05-04  Gerhard Jaeger <g.jaeger@earthling.net>
	* backend/plustek.c: Applied Petters' patch to avoid an
	  illegal memory access

2001-05-04  Henning Meier-Geinitz <henning@meier-geinitz.de>
	
	* NEWS: Updated.
	* PROJECTS: Removed umax_pp. Added Canon FB620S and FS2710 backend.
	* TODO: Removed entry about umax_pp and comment about testing
	  for existing sane installations and plustek memory access violation.
	  Added Canon FB620S and FS2710 backend and entries about Tru64
	  compilation problems and installation procedure for translations.
	* doc/backend-writing.txt: Added entries about SANE_I18N() and
	  documentation directories.

2001-05-03  Henning Meier-Geinitz <henning@meier-geinitz.de>

	* AUTHORS README: Updated concerning umax_pp.
	
	* doc/Makefile.in doc/sane-umax_pp.man .cvsignore: Added manpage for
	  umax_pp (patch from St<53>phane Voltz <svoltz@wanadoo.fr>).
	
	* tools/README tools/Makefile.in tools/umax_pp.c tools/.cvsignore:
	  Added umax_pp test program (patch from St<53>phane Voltz 
	  <svoltz@wanadoo.fr>).
	
	* configure configure.in include/sane/config.h.in: Test for
	  linux/ppdev.h (for umax_pp backend).
	
	* backend/umax_pp.c backend/umax_pp.h backend/umax_pp_low.c
	  backend/umax_pp_low.h backend/umax_pp_mid.c backend/umax_pp_mid.h
	  backend/umax_pp.conf backend/umax_pp.desc backend/Makefile.in 
	  dll.conf: Added umax_pp backend (patch from St<53>phane Voltz 
	  <svoltz@wanadoo.fr>).

2001-05-02  Henning Meier-Geinitz <henning@meier-geinitz.de>

	* configure configure.in: Don't use -ansi for Solaris. On some
	  Solaris installations compilation breaks with -ansi.

	* doc/Makefile.in tools/sane-desc.el doc/.cvsignore: Install
	  sane.ps and sane.dvi if latex/makeindex/dvips is available.
	  Generate sane-backends.html in doc/. New target: 
	  install-mostang. Installs the sane standard 
	  (.ps, .ps.gz and html), the html manpages, and sane-backends.html
	  on www.mostang.com.

2001-05-01  Henning Meier-Geinitz <henning@meier-geinitz.de>

	* configure configure.in include/sane/config.h.in README.solaris
	  sanei/sanei_scsi.c: Added support for Solaris sgen SCSI driver
	  (patch from Juergen Keil <jk@tools.de>).
	* acinclude.m4 aclocal.m4 configure: Added Irix to the list
	  of operating systems that can use -Wl,-rpath.
	* doc/Makefile.in: Install all the READMEs and other available
	  documentation in $docdir. Print which manpage is generated.
	  Don't remove files/dirs that doesn't exist. Remove the html
	  manpages in distclean. Fixed spelling mistake in .PHONY.
	* TODO: Added entries about possible segfaults and memory leaks.
	  Added entry about AIX problems. Removed entry about installing
	  documentation.
	* PROJECTS: Added Canon FB330P, FP630P.

2001-04-30  Jochen Eisinger <jochen.eisinger@informatik.uni-freiburg.de>

	* doc/sane-mustek_pp.man: Added information about CIS patches
	  by Eddy De Greef

2001-04-29  Chris Pinkham <cpinkham@infi.net>

	* backend/artec.c: Fixed bug causing possible dereference of a NULL
	  pointer.
	* backend/artec.desc: Modified USB entry to say AS6E scanner supported
	  by SANE AS6E backend.

2001-04-29  Petter Reinholdtsen <pere@td.org.uit.no>

	* sanei/sanei_config.c sanei/sanei_codec_bin.c: Avoid reading
	  uninitialized memory.
	* sanei/sanei_config.c: Fix memleak when using env
	  SANE_CONFIG_DIR.
	* backend/net.c sanei/sanei_wire.c include/sane/sanei_wire.h: Make
	  sure net backend release all memory when finished.
	* README: Added info about the CVS repository.

2001-04-29  Henning Meier-Geinitz <henning@meier-geinitz.de>

	* sanei/sanei_wire.c: Don't free memory that's not alocced.
	* sanei/sanei_config.c: Avoid reading uninitialized memory when 
	  checking SANE_CONFIG_DIR.
	* backend/mustek.c: Fixed several memory leaks.
	* frontend/scanimage.c: Fixed memory leak.
	* sanei/sanei_config2.c: Fixed memory leak: vendor wasn't freed.
	* PROJECTS: Added entry for the Fujitsu M3091DCd. Updated my email
	  address.
	* TODO: Added entry for the Fujitsu M3091DCd and a combined Fujitsu
	  backend. Clarified that "printf" also shouldn't be used.
	* backend/dll.desc: Added my email as contact address.
	* backend/m3091.desc: New file for the Fujitsu M3091DCd.
	* doc/sane-mustek.man: Updated URL.

2001-04-28  Henning Meier-Geinitz <henning@meier-geinitz.de>

	* backend/mustek.CHANGES backend/umax.CHANGES backend/umax.FAQ
	  backend/umax.TODO: Moved to doc/mustek respectively doc/umax.
	* doc/canon.CHANGES doc/canon.install2700F.txt doc/canon:
	  Moved canon-specific documentation to doc/canon.
	* doc/mustek: New subdirectory for mustek-specific documentation.
	* doc/sane-umax*.html doc/sane-umax*.jpg doc/sane-umax-doc.tex
	  doc/sane-umax-doc.dvi doc/umax: Moved all the umax-specific
	  documentation to new subdirectory umax.

2001-04-28  Peter Kirchgessner <peter@kirchgessner.net>

        * backend/hp.desc, doc/sane-hp.man: Add support for new models
          through PTAL-library

2001-04-27  Henning Meier-Geinitz <henning@meier-geinitz.de>

	* backend/agfafogus.c: Moved PATH_MAX after sanei_backend.h include
	  to avoid warning. Changed printf to DBG.
	* backend/mustek.c backend/mustek.CHANGES backend/mustek.desc: Added
	  support for translating options. Used only PACKAGE_VERSION for
	  output. Updated email address. New version: 1.0-107.
	* include/sane/sanei_backend.h include/sane/saneopts.h: Added macro
	  SANE_I18N. It's used to mark strings that can be translated and
	  used by a frontend. Usually these are option titles and descriptions
	  as well as the contents of string lists. Used this macro to mark
	  the translatable strings in saneopts.h. More translation support
	  will follow.

2001-04-22  Henning Meier-Geinitz <henning@meier-geinitz.de>

	* PROBLEMS: Point to pnm/saned security risks.
	* TODO: Removed the entries about epson usb mis-detection and check
	  for installed sane versions.
	* configure configure.in backend/Makefile.in: Added detection of older
	  versions of SANE. The pnm backend is now disabled by default.
	* backend/dll.c backend/dll.desc: Fixed file descriptor leak (found by
	  Douglas Gilbert). New version: 1.0.2.
	* backend/net.desc: Added Jochen Eisinger's email address as contact
	  for the net backend.
	* doc/sane-pnm.man: Point to pnm/saned security risks.
	
2001-04-21  Karl Heinz Kremer <khk@khk.net>

	* backend/epson.conf: Commented out the usb config entry, this can
	  block other USB scanners from being recognized.

2001-04-19  Henning Meier-Geinitz <henning@meier-geinitz.de>

	* AUTHORS: Added Michael Herder and me for pnm. Updated my email
	  address.
	* TODO: Removed pnm entry about adding more options. Added entry about
	  epson backend freezing when trying to detect non-epson USB scanner.
	  Added entry about adding contact adresses to .desc files. Added
	  comment about me working on a sane man page. Removed entry about OS/2
	  problems in sanei_scsi.c.
	* configure configure.in: Removed a newline in --help message.
	* backend/pnm.c: Added several options: gamma tables 
	  (-> arrays), resolution option (word list), read only test option
	  (SANE_CAP_SOFT_DETECT), several options for returning status codes
	  in sane_read (all of this is from Michael Herder <crapsite@gmx.net>).
	  Added build version info, print version information in sane_init.
	  Use ../include/sane/ for includes. Version is 1.0.1.
	* backend/pnm.desc: Updated contact info and version.
	
2001-04-19  Gerhard Jaeger <g.jaeger@earthling.net>
	* backend/plustek.c: removed again that old fgets() call - sorry

2001-04-19  Petter Reinholdtsen <pere@td.org.uit.no>

	* tools/sane-config.in: Fix typo in previous commit.

2001-04-17  Karl Heinz Kremer <khk@khk.net>

	* doc/sane-epson.man: Fixed types, some reformatting and got rid
	  of a duplicate paragraph.

2001-04-17  Henning Meier-Geinitz <hmg@gmx.de>

	* backend/dc210.desc backend/dc240.desc backend/microtek2.desc:
	  Update contact information for backends. dc240 status is :NEW.
	* TODO: added entries about as6e status shouldn't be :new, and
	  installing all documentation files.
	
2001-04-16  Petter Reinholdtsen <pere@td.org.uit.no>

	* Makefile.in: New target 'sort-cvsignore' to keep all .cvsignore
	files sorted.

	* acinclude.m4 configure.in tools/sane-config.in: Try to guess how
	to set runtime link path, and make it easier to extend.

	* acinclude.m4 configure.in: Clean up warning flag handling.

2001-04-16  Henning Meier-Geinitz <hmg@gmx.de>

	* README: Updated xsane link.
	* configure configure.in backend/dll.c backend/dll.desc 
	  backend/net.c backend/net.desc include/sane/config.h.in
	  Yet another change in the version system for dll and net.
	  For sane_init return the version of the package but use
	  own internal version number in the source (printed with
	  debugging enabled) and in *.desc. The internal versions
	  of both net and dll are set to 1.0.1. Please increase the
	  build number with every change on the source files.
	* doc/realeases.txt -> doc/releases.txt. Fixed spelling error.
	  Added entries about sane-backends.html, sane.ps, man pages,
	  platforms page.
	
2001-04-14  Gerhard Jaeger <g.jaeger@earthling.net>
	* backend/plustek.c backend/plustek.desc backend/plustek.h
	  backend/plustek-share.h
	  minor fixes and additional scanner models
	* doc/sane-plustek.man added info about slowIO switch

2001-04-13  Oliver Rauch <Oliver.Rauch@Rauch-domain.de>
	* changed my email address in AUTHORS

2001-04-13  Henning Meier-Geinitz <hmg@gmx.de>

	* PROJECTS TODO: Added entry about E3 USB chipset.
	* backend/dll.c backend/dll.desc: New version is 1.0.5. Version and
	  PACKAGE_VERSION is printed with debug level set to 1 or higher.
	  The version numbers of all backends that are loaded are printed
	  at debug level 3 or higher. Print error if backend with wrong
	  major version number is loaded. Some standardization changes
	  concerning the DBG messages.
	* backend/net.c backend/net.desc: New version is 1.0.5. Version and
	  PACKAGE_VERSION is printed with debug level set to 1 or higher.
	  Some standardization changes concerning the DBG messages.
	* backend/pnm.c: Return SANE_INFO_RELOAD_PARAMS even if the pnm
	  file doesn't exist or can't be loaded (from mh <crapsite@gmx.net>).
	* doc/backend-writing.txt: Added AUTHORS to the list of things that
	  should be updated when including a new backend. Added points about
	  avoiding printf and exit in backends.
	* doc/releases.txt: New file. This text summarizes some points to
	  pay attention to when a new release of sane-backends is made.
	  Additions and corrections are appreciated.
	* doc/scanimage.man: Add some more information about the -V option.
	* frontend/scanimage.c: The option -V now also prints the version of
	  the backend (ususally dll).
	
2001-04-11  Abel Deuring <a.deuring@satzbau-gmbh.de>
	* sanei/sanei_scsi.c: fixed a bug in error handling for the
	  Linux SG driver verison 3.x
	* sanei/sanei_scsi.c, configure.in, configure: Usage of direct IO
	  disabled by default.
         * README.linux: Added a note, how to enable direct IO

2001-04-08  Henning Meier-Geinitz <hmg@gmx.de>
	
	* backend/mustek.c backend/mustek.desc backend/mustek.CHANGES
	  Added detection of the TA for the Paragon 1200 SP Pro. Added
	  warning about not supported Trust scanners. Changed description
	  of contrast and brightness settings. Backend status is "stable" 
	  now. New version: 1.0-106.
	* acinclude.m4 aclocal.m4: Fixed comment concerning dc240.
	* configure configure.in include/sane/config.h.in: Added test for
	  socklen_t in sys/socket.h. This fixes the compilation problem on
	  Irix.
	* doc/sane-avision.man doc/sane-ricoh.man doc/sane-s9036.man
	  doc/sane-tamarack.man: find-scanner is now called
	  sane-find-scanner and installed on the system so it's not 
	  necessary to point to the tools directory.
	* frontend/scanimage.c: Fixed too long line in output.
	* sane-config.in: Name is sane-config again (was sane-backends-config
	  due to the renaming of the package).
	* TODO: Removed entry about net.c not compiling on Irix and
	  references to find-scanner in the man pages. Updated numbers of
	  the compilation warnings. Still too many, however.
	  
2001-04-07  Henning Meier-Geinitz <hmg@gmx.de>

	* backend/sc240.c backend/dc240.h backend/dc240.conf
	  backend/dc240.desc backend/dll.conf doc/sane-dc240.man:
	  Added dc240 backend for the Kodak DC240 Digital camera (from
	  Peter Fales <peter@fales.com>).
	* doc/Makefile.in: Added sane-dc240 in section 5.
	* backend/Makefile.in: Added dc240.
	* configure configure.in: If the jpeg libs are not available,
	  dc240 is also disabled.
	* AUTHORS: Added entry for dc240 and updated email address of
	  Peter Fales.
	* NEWS: First version of the news entry for 1.0.5.
	* PROJECTS: Removed dc240. Added Microrec ScanMaker 3600.
	* README: Added dc240.
	* TODO: Removed dc240. Added entry about keep-alive mechanism in saned.
	* sane-backends.lsm: Added dc240.
	* testsuite/.cvsignore: New file. Added entry for Makefile.

2001-03-31  Karl Heinz Kremer <khk@khk.net>

	* backend/epson.*: Next attempt to get the reported number of 
	  lines correct for the "color shuffling" part.
          Added more comments.

2001-03-31  Henning Meier-Geinitz <hmg@gmx.de>

	* backend/mustek.c backend/mustek.desc backend/mustek.h
	  backend/mustek.CHANGES: Fixed grascale gamma for the 600 II N.
	  Fixed ADF problems when selecting windows smaller than the
	  whole scan area. Fixed linedistcnace corrections issues concerning
	  ADF and concerning 1200SP V 1.00. New version: 1.0-105.

2001-03-31  Henning Meier-Geinitz <hmg@gmx.de>

	* PROJECTS: Updated entry about Canon 1220U and Umax 1220P / HP3200C.
	  Added entry about Kodak DC-240.
	* TODO: Added Umax 1200P/2000P & HP 320C + Kodak DC-240 as backends
	  to be included. Added net.c compilation problem.
	
2001-03-10  Jochen Eisinger <jochen.eisinger@gmx.net>

	* frontend/saned.c: fixed bug that allowed access to a scanner
	  without being prompted for a password

2001-03-04 Oliver Rauch <Oliver.Rauch@Wolfsburg.DE>

	* umack backend updated to version 1.0-build-25

2001-02-26 Abel Deuring <a.deuring@satzbau-gmbh.de>

	* sanei/sanei_scsi.c: removed a possible null pointer 
	  dereference in the Solaris/Schilling driver part. (Bug was 
	  found and fixed by William L. Sebok)

	* backend/tamarack.c: inconsistent call to sanei_scsi_cmd fixed

2001-02-22  Petter Reinholdtsen <pere@td.org.uit.no>

	* TODO: Add comment on how link problems should really be fixed.
	* TODO: List memleak problem for sane_get_devices().

	* configure.in include/sane/config.h.in: Really move definition of
	SCSIBUFFERSIZE from CFLAGS to config.h.

	* configure.in testsuite/*: Started on runtime test suite.
	Currently only tests if PNM test scanning works.

	* sanei/sanei_constrain_value.c sanei/sanei_load_values.c
	sanei/sanei_save_values.c: Include "sane/sanei.h" to make sure the
	prototype match the function.

	* backend/pnm.c: Write more sensible error message when failing to
	open PNM file.

	* include/sane/sanei_backend.h: Include <fcntl.h> before testing
	for O_NONBLOCK and <limits.h> before testing for PATH_MAX to
	increase the chances of getting the real value.

2001-02-12  Petter Reinholdtsen <pere@td.org.uit.no>

	* backend/dll.c backend/v4l.c: Get rid of small memory leak when
	using 'scanimage -L'.

2001-02-10  Tom Martone <tom@martoneconsulting.com>

        * backend/bh.c backend/bh.h doc/sane-bh.man
	  added support for Copiscan 8000 series by Mark Temple
	  added options deskew and rotation
	  inquiry compares product to COPISCAN rather than COPISCAN II

2001-02-04 Peter Kirchgessner <peter@kirchgessner.net>

        * hp-backend V0.94, backend/hp.c hp-handle.c hp-scl.h:
          Switch off lamp after scan

2001-01-31 Abel Deuring <a.deuring@satzbau-gmbh.de>

	* sanei/linux_sg3_err.h: New version provided by Douglas Gilbert.
	  Does not longer #include <linux/../scsi/scsi.h> and
	  #include <linux/../scsi/sg.h>
	* sanei/sanei_scsi.c (Linux part): fixed some format errors in 
	  debug output; added debug: system("cat /proc/scsi/sg/debug 1>&2"), 
	  if debug level >= 255. (Suggestion by Douglas Gilbert)

2001-01-23 Oliver Rauch <Oliver.Rauch@Wolfsburg.DE>

	* TODO: sane-config changes

2001-01-21  Tom Martone <tom@martoneconsulting.com>

        * backend/dll.conf: Added bh

2001-01-21  Henning Meier-Geinitz <hmg@gmx.de>

	* AUTHORS: Added Tom Martone.
	* PROJECTS: Removed bh (now included in sane).
	* README: Added entry for sane-bh(5).
	* TODO: Removed bh. Updated BearPaw entry. Added entry about v4l
	  problem.
	* backend/v4l.c: Changed comment as v4l is part of the sane package.

2001-01-20  Tom Martone <tom@martoneconsulting.com>

        * doc/.cvsignore: Added sane-bh.5.

2001-01-20  Tom Martone <tom@martoneconsulting.com>

	* backend/bh.c backend/bh.conf backend/bh.h doc/sane-bh.man
	  Added new backend Bell and Howell Copiscan scanners
	* backend/bh.desc
	  Updated version from (0.1) to 1.0-4
	  Referenced manpage
	* backend/Makefile.in
	  Added bh to PRELOADABLE_BACKENDS
	  Added libsane-bh.la dependencies
	* doc/Makefile.in
	  Added sane-bh.5 to SECT5

2001-01-17  Henning Meier-Geinitz <hmg@gmx.de>

	* backend/mustek.c backend/mustek.desc backend/mustek.h
	  backend/mustek.CHANGES doc/sane-mustek.man:
	  Added 36 bit mode for Pro models. Removed support for "special"
	  modes, used options instead. Code cleanup. Updated manpage
	  concerning sane-find-scanner. New version: 1.0-104.
	* configure: regenerated from configure.in.
	
2001-01-14  Petter Reinholdtsen <pere@td.org.uit.no>

	* sanei/sanei_scsi.c: Make sure to initialize uninitialized
	variable 'defined' to zero.

	* include/sane/sanei_wire.h: Add missing prototype for
	sanei_w_ptr() and sanei_w_bool().

	* configure.in include/sane/config.h.in: Move definition of
	HAVE_DEV_URANDOM and SCSIBUFFERSIZE from CFLAGS to config.h.

2001-01-07  Abel Deuring <a.deuring@satzbau-gmbh.de>

	* sanei/sanei_scsi-c: (Linux part) timeout for SCSI commands
	  sent with the SG driver version increased; debug output of
	  device status, host status, driver status and sense buffer 
	  added.

2001-01-09  Henning Meier-Geinitz <hmg@gmx.de>

	* PROJECTS TODO: Added/updated entries about backends for Mustek
	  BearPaw and 1200 UB scanners.

2001-01-07  Abel Deuring <a.deuring@satzbau-gmbh.de>

	* sanei/sanei_scsi-c: (Linux part) improved detection of
	  sanei_scsi_max_request_size. Setting SANE_SG_BUFFERSIZE for
	  low drivers which don't support scatter-gather should
	  no longer be necessary.
	* sanei/sanei_scsi-c: (Linux part) Added support for the new
	  devfs in sanei_scsi_find_devices-
	* backend/sharp.c: Test for existence of shm.h added.
	* TODO: Removed entry about missing detection of shm.h in sharp
	  backend.

2001-01-03  Henning Meier-Geinitz <hmg@gmx.de>

	* PROJECTS: Added Umax 1220P / HP3200C.

2000-12-31  Henning Meier-Geinitz <hmg@gmx.de>

	* tools/find-scanner.c: Removed. Now called sane-find-scanner.
	* tools/sane-find-scanner: New file (was find-scanner).
	* tools/.cvsignore tools/Makefile.in tools/README: Updated because
	  of name change. sane-find-scanner is installed now.
	* README README.linux: Updated because of sane-find-scanner.
	* frontend/scanimage.man: Updated because of sane-find-scanner.
	* doc/sane-find-scanner.man: New file.
	* doc/.cvsignore doc/Makefile.in: Added sane-find-scanner(1).
	* TODO: Updated concerning sane-find-scanner. Added entry about
	  qcam /tmp file handling. Some spelling corrections.

2000-12-31  Henning Meier-Geinitz <hmg@gmx.de>

	* backend/mustek.CHANGES backend/mustek.c backend/mustek.desc 
	  backend/mustek.h doc/sane-mustek.man:  Added calibration for Pro
	  scanners and the SE 12000 SP Plus. Added option to use the full
	  legal size of the Paragon 1200 LS scanner. Added fast preview for
	  Pro scanners. Bug fixes. New version: 1.0-103.
	
2000-12-25  Karl Heinz Kremer <khk@khk.net

	* backend/epson.*: Version 0.2.01
	  Added bit-depth selection again. 
   	  Fixed problem with bilevel scanning with Perfection610: The
	  line count has to be an even number with this scanner.
	  Several initialization fixes regarding bit depth selection.
	  This version goes back into the CVS repository, the 1.0.4 
	  release is out and therefore the code freeze is over.
	  Some general cleanup, added more comments.

2000-12-23  Henning Meier-Geinitz <hmg@gmx.de>

	* TODO: Removed entry about net/saned crashes.
	* backend/net.c: Fixed segfault when using SANE_TYPE_STRING options
	  (e.g. scanimage on localhost). Added checks to prevent other
	  segfaults. Fixed some warnings.
	* backend/snapscan.desc: Changed to use new homepage.

2000-12-23  Henning Meier-Geinitz <hmg@gmx.de>

	* NEWS: Added date of release.
	* TODO: Removed entries about PATH_MAX, sanei_scsi_find_devices, and
	  shm.h. Added entry about the necessity to check HAVE_SYS_SHM_H.
	* configure configure.in include/sane/config.h.in: Default to
	  --enable-warnings again. Don't set "-ansi" for OS/2. Test for 
	  sys/shm.h. 
	* backend/GUIDE: Moved to doc/backend-writing.txt.
	* doc/backend-writing.txt: New file (moved from backend/GUIDE).
	  Added comments about sanei-backend.h and PATH_MAX.
	* include/sane/sanei_backend.h: Added define for PATH_MAX (if
	  necessary).
	* sanei/sanei_scsi.c: Implemented sanei_scsi_find_devices for FreeBSD
	  (from ports@FreeBSD.org).
	* tools/Makefile.in: Use INSTALL_SCRIPT instead of INSTALL_PROGRAM for
	  sane-config (from ports@FreeBSD.org).

************************  Release of sane-backends 1.0.4 **********************

2000-12-22  Henning Meier-Geinitz <hmg@gmx.de>
	
        * configure configure.in: Changed version to 1.0.4 and package to 
	  sane-backends (from Oliver Rauch <Oliver.Rauch@Wolfsburg.DE).
        * sane.lsm Removed (renamed to sane-backends.lsm).
	* sane-backends.lsm New file. Package name is sane-backends instead 
	  of sane and added additional maintainer: Oliver Rauch (from
	  Oliver Rauch <Oliver.Rauch@Wolfsburg.DE).

2000-12-17  Henning Meier-Geinitz <hmg@gmx.de>

	* TODO: Some points about OS/2 compilation problems.

2000-12-17  Henning Meier-Geinitz <hmg@gmx.de>

	* TODO: More details for net/saned problems.

2000-12-16  Jochen Eisinger <jochen.eisinger@gmx.net>

	* TODO: removed entry about net.c seg-faulting when saned isn't
	  loaded or timed-out

2000-12-16  Henning Meier-Geinitz <hmg@gmx.de>

	* configure configure.in: Disable warnings by default for release.
	* sanei/sanei_wire.c: Fixed typo.

2000-12-16  Jochen Eisinger <jochen.eisinger@gmx.net>

	* sanei/sanei_wire.c: added test for negative parameter to memcpy()

2000-12-15 Gerhard Jaeger <g.jaeger@earthling.net>

	* fixed wrong options in sane-plustek.man

2000-12-12 Oliver Rauch <Oliver.Rauch@Wolfsburg.DE>

	* corrected backend version in umax.desc

**************************  Code freeze for SANE 1.0.4 ** *********************

2000-12-12  Henning Meier-Geinitz <hmg@gmx.de>

	* NEWS: Updated/corrected version numbers of backends.
	
2000-12-10  Henning Meier-Geinitz <hmg@gmx.de>

	* doc/sane-scsi.man: Small changes/updates concerning Linux
	  2.2. Updated entries about Adaptec cards, NCR53c400/Domex 3181
	  cards, NCR 810 cards. Removed direct links to some backends.
	* doc/sane-snapscan.man: Added link to new snapscan website.

2000-12-10  Henning Meier-Geinitz <hmg@gmx.de>

	* backend/mustek.c backend/mustek.desc backend/mustek.CHANGES:
	  Fixed wrong comment in encode_resolution. Added missing test for
	  return status in sane_start.  Fixed wrong calculation of tlx and
	  tly for Pro series scanners. Increased version number.

2000-12-09  Karl Heinz Kremer <khk@khk.net>

	* backend/epson.c: Fixed user defined gamma curve for
	  inverted images. When scanning negatives the gamma curve
	  was applied incorrectly. Fixed debug output for user defined
	  gamma curves - no [epson] in between values anymore.

2000-12-09  Peter Kirchgessner <peter@kirchgessner.net>

        * doc/sane-hp.man, backend/hp.desc
          Add HP ScanJet 6390C to list of supported scanners

2000-12-07  Henning Meier-Geinitz <hmg@gmx.de>
	
	* TODO: Updated. Removed entries about plustek comment problembelm
	  and libsane.la. Added entry about disabling local scanning.

2000-12-07 Gerhard Jaeger <g.jaeger@earthling.net>
	
    * backend/plustek-share.h backend/plustek.h backend/plustek.c
      removed warning conditions
      fixed a bug that causes wrong frontend displays
      fixed problem when driver returns error during read

2000-12-05  Henning Meier-Geinitz <hmg@gmx.de>

	* NEWS: Updated backend versions. Added point about compilation fixes
	  on Irix and FreeBSD.
	* backend/mustek.c backend/mustek.desc backend/mustek.CHANGES:
	  Fixed problem with lamp control of SE scanners and reduced
	  length of scan area for Paragon 1200 SP PRO. Removed warning for
	  this scanner. Increased version number.
	
2000-12-05  Henning Meier-Geinitz <hmg@gmx.de>
    
	* TODO: Updated. Added point about plustek-share.h using c++ comment
	  and reminder to check config.in.h. Removed entriy about as6e.c stat
	  result check.
	* backend/as6e.c backend/as63.h: Comitted patch from Eugene Weiss
	  <eweiss@sas.upenn.edu>. Fixes: Use only DBG (no printfs). Check result
	  of stat. Add GPL header.

2000-12-05 Gerhard Jaeger <g.jaeger@earthling.net>
	
	* backend/plustek-share.h
	  cleanup

2000-12-05  Peter Kirchgessner <peter@kirchgessner.net>

	* backend/hp-handle.c
	  - Change SCL_UNLOAD to SCL_CHANGE_DOC (bug from copying code)

2000-12-04  Henning Meier-Geinitz <hmg@gmx.de>

	* TODO: Updated. Added entries about as6e stat problems and addition to
	  sanei_scsi.c from FreeBSD ports.
	
*************************  snapshot-2000-12-04  *******************************

2000-12-04  Peter Kirchgessner <peter@kirchgessner.net>

        * backend/hp.c, hp-handle.c, hp.desc
          - fix problem with ADF support on 6350C (and maybe others)

2000-12-04  Oliver Rauch <Oliver.Rauch@Wolfsburg.DE>

	* removed usage of gettext, problem with -lintl should be solved:
	  - removed usage of gettext from lib/getopt.c
	  - removed test for libintl/gettext in configure[.in]
	  - removed intllib from frontend/Makfile.in
	* updated umax.desc

2000-12-03  Karl Heinz Kremer <khk@khk.net>

	* backend/epson.*: Version 0.1.38
	  Removed changes regarding 12/14 bit support because of SANE
	  feature freeze for 1.0.4. 
	  The following fixes are in the software compared to the version
	  prior to the feature freeze:
	  - refresh UI after a change in the scan mode setting (was not updated
	    when going from Binary to Gray or vice versa)
	  - Read values for "line distance" from the scanner instead of using
	    hardcoded values. This makes sure the backend always uses the correct
	    values regardless of firmware version.
	  - Fixed an "off-by-one" error in the color reordering routine that 
	    caused weird artifacts in some instances.

2000-12-03  Karl Heinz Kremer <khk@khk.net>

	* backend/epson.c: Fixed off-by-one in color reordering

2000-12-02  Karl Heinz Kremer <khk@khk.net>

	* backend/epson.*: Read information about optical resolution 
	  and line distance from scanner instead of hardcoded values.
          Add support for color depth > 8 bits per channel. 
	  (can use 12, 14 and 16 bits per channel)
	  EPSON backend is now version 0.36 

2000-11-30  Oliver Rauch <Oliver.Rauch@Wolfsburg.DE>

	* changed backend/Makefile.in:
	  wrong old installation of libsane.la
	  $(INSTALL_PROGRAM) libsane.la $(libdir)/libsane.la
	  to this:
	  $(LIBTOOL) $(MINST) $(INSTALL_PROGRAM) libsane.la $(libdir)/libsane.la

2000-11-30  Henning Meier-Geinitz <hmg@gmx.de>

	* README.irix: Removed. Problem with libjpeg is solved.
	* TODO: Updated. Removed hpoj addition. Added snapscan link. Added 
	  entry about net backend segfaulting if using net:localhost. Removed
	  artec O_SYNC problem. Removed Irix jpeg problem. Removed PTAL 
	  addition.
	* doc/saned.man: Added paragraph about xinetd (from Matt Mozur 
	  <matt.mozur@sourwood.net>). Removed links to backends, added
	  sane-"backendname" instead.
	* doc/sane-net.man: Added comment about segfaults if scanning
	  on localhost.
	* sanei/sanei_scsi.c: Added missing DBG_INIT (from FreeBSD ports).

2000-11-30 Gerhard Jaeger <g.jaeger@earthling.net>
	
	* backend/plustek.c backend/plustek.desc backend/plustek-share.h
	  backend/plustek.h doc/sane-plustek.man:
	  changed to version 0.38 - document update, minor bugfixes

2000-11-30  Chris Pinkham <cpinkham@infi.net>

	* artec.c: removed O_SYNC for posix compatibility, converted variable
	  to unsigned char to get rid of overflow error.  Changed version
	  to 0.5.15.

2000-11-30  Oliver Rauch <Oliver.Rauch@Wolfsburg.DE>

	* changed sane-config.in again:
	  sane-config --libs has to print all libs
	  that the sane libs depend on.
	  This is not needed for shared libs and that
	  was the reason why I removed all libs but "-lsane".
	  But when linking against static sane libs we need
	  to know about all necessary libs.

*************************  snapshot-2000-11-28  *******************************

2000-11-28  Oliver Rauch <Oliver.Rauch@Wolfsburg.DE>

	* added SANE_CHECK_JPEG to aclocal.m4 and configure.in
	  (test routine by henning Meier Geinitz)

*************************  Feature freeze for SANE 1.0.4  *********************

2000-11-27  Peter Kirchgessner <peter@kirchgessner.net>

        * NEWS: hp-backend version is 0.92

2000-11-27  Oliver Rauch <Oliver.Rauch@Wolfsburg.DE>

	* backend/umax.c: corrected wrong BUILD (25->24)

2000-11-26  Henning Meier-Geinitz <hmg@gmx.de>

	* AUTHORS: Added Karsten Festag as maintainer of microtek2.
	* backend/mustek.* doc/sane-mustek.man: Update to Mustek backend
	  1.0-100. Added option fast-preview that tries to use the fastest
	  mode available for preview. This is supported for the 3-pass
	  scanners (was option "preview in gray") and some of the
	  ScanExpress scanners (6000 SP, 12000 SP Plus). Use #include 
	  "../include/sane/...". Put option force-wait into mustek.conf
	  (disabled). Removed block mode for Paragon 6000 SP and 8000 SP. 
	  Code cleanup. More debug output. Details in backend/mustek.CHANGES.
	* doc/.cvsignore: Added sane-as6e.5 and sane-nec.5.
	
2000-11-26  Peter Kirchgessner <peter@kirchgessner.net>

        * backend/hp.desc, doc/sane-hp.man
          Add descriptions for PTAL support

        * backend/hp.c
          If PTAL-support requested, write warning about unsupported PTAL
          with DBG(0,...  instead of DBG(1,...

2000-11-25  Henning Meier-Geinitz <hmg@gmx.de>

	* configure configure.in acinclude.m4 aclocal.m4 
	  include/sane/config.h.in: Added test for PTAL library and headers 
	  (patch from David Paschal <paschal@rcsis.com>). Some reformating of 
	  the output of configure --help.

	* backend/GUIDE: Updated entry about #include.
	
2000-11-24  Henning Meier-Geinitz <hmg@gmx.de>

	* AUTHORS: Removed authors of xscanimage and xcam (now in 
	  sane-frontends).
	* README.unixware2, README.unixware7: X-frontends are no longer
	  included. Removed comments and sourcecode of "rev" (not supported/used
	  in backends/Makefile anymore).
	* sane.lsm: X-frontends are no longer included. Used blanks instead of
	  tabs.
	* doc/scanimage.man: Removed links to backends, added generic link
	  instead.
	* doc/.cvsignore frontend/.cvsignore: X-frontends are no longer included.

2000-11-24  Oliver Rauch <Oliver.Rauch@Wolfsburg.DE>

	* changed configure.in, configure frontend/Makefile.in
	  and backend/Makfile.in:
	  The shared libraries required by the backends are linked to
	  the backends (they have been linked to the frontends before).
	  Only libintl is linked to the frontend.
	* changed tool/sane-config.in, sane-config --libs => "-lsane",
	  all other libraries are linked to the backend libs now

2000-11-24  Jochen Eisinger <jochen.eisinger@gmx.net>

	* doc/scanimage.man doc/saned.man: updated description of password
	  file
	* sanei/sanei_auth.c frontend/saned.c frontend/scanimage.c: replaced
	  index() by strchr(). Changed style of password file
	* backend/net.c: the net backend now prepends net:host: to the
	  resource before calling the auth_callback function

2000-11-23  Oliver Rauch <Oliver.Rauch@Wolfsburg.DE>

	* removed doc/xcam.man, doc/xscanimage.man and
	  updated doc/Makefile.in
	* changed configure.in and frontend/Makefile.in,
	  "-lintl" is not added to @LIBS@ any more, @INTLLIBS@
	  is defined instead now, this is necessary because "-lintl"
	  has to be added to the frontends and not to a backend and
	  sane-config --libs must not list it.
	* Added "Introduction" to README that tells about
	  the new X-frontend package
	* removed gimp and gtk parts from include/sane/config.h.in
	* removed gtk test from aclocal.m4
	* removed xcam.c xscanimage.c sane-style.rc progress.c progress.h
                  preview.c preview.h preferences.c preferences.h gtkglue.c gtkglue.h 
          from frontend/
	* removed parts for xcam and xscanimage from frontend/Makefile.in,
          configure.in and updated confiugre

2000-11-23  Henning Meier-Geinitz <hmg@gmx.de>

	* NEWS: Updated for SANE 1.0.4. Please check.
	* README.aix: Removed paragraph about shared libs not working.
	* README.linux: Added paragraph about excessive warnings due to glibc
	  bug (from Peter Kirchgessner).
	* TODO: Removed entry about shared libs not working on AIX. Added entry
	  about PTAL checks. Removed entry about DBG and microtek2. Added entry
	  about dc210 and jpeg functions. Added entry about using strchr() 
	  instead of index().
	* sane.lsm: Added NEC.
	* backend/microtek2.c: (from karsten.festag@t-online.de (Karsten
	  Festag)) Use DBG instead of printf/fprintf. Use 
	  #include "../sane/include/..." instead of #include "sane/...". Fixed
	  warnings. 
	
2000-11-23  Karl Heinz Kremer <khk@khk.net>

	* backend/epson.c:  Display "Set Focus" control only for scanners that
	  can actually handle the command.

2000-11-22  Oliver Rauch <Oliver.Rauch@Wolfsburg.DE>

	* changed configure and configure.in, removed test for sting.h/strings.h
	  this is not needed because we use strchr instead (always in string.h)
	  of index (sometimes in string.h, sometimes in strings.h)

	* changed ltconfig for aix4*, repleace -o $objdir/$soname by -o $lib,
	  the shared libraries are handled correct now

2000-11-21 Abel Deuring <a.deuring@satzbau-gmbh.de>
	* backend/sharp.c, backend/sharp.desc, doc/sharp.man: Support
	  for JX320 added	

2000-11-21  Henning Meier-Geinitz <hmg@gmx.de>

	* AUTHORS: Added FUKUDA Kazuya for the nec Backend. Used spaces instead 
	  of tabs.
	* PROJECTS: Removed entry about NEC. Added/updated entries about Mustek
	  USB scanners.
	* README: Added link to sane-nec(5).
	* TODO: Removed entries about sanei_authorize and plain text passwords.
	* backend/Makefile.in backend/dll.conf backend/nec.conf backend/nec.c
	  backend/nec.desc backend/nec.h doc/Makefile.in doc/sane-nec.man:
	  Added nec backend for the NEC scanners PC-IN500/4C (from Kazuya Fukuda 
	  <fukuda@pjs.nevt.nec.co.jp>)

2000-11-20  Henning Meier-Geinitz <hmg@gmx.de>
	
	* AUTHORS: Added Eugene S. Weiss.
	* PROJECTS: Removed Artec as6e backend.
	* README: Added link to man sane-as6e.5.
	* TODO: Removed as6e.
	* doc/Makefile.in: Added generation of as6e manpage.
        * backend/Makefile.in: Added entries for as6e.
	* backend/dll.conf: Added as6e.
	* backend/as6e.c backend/as6e.h backend/as6e.desc doc/sane-as6e.man:
	  Added backend for Artec AS6E parallel port scanner (from Eugene S.
	  Weiss <yossarian@users.sourceforge.net>).
	
2000-11-20  Jochen Eisinger <jochen.eisinger@gmx.net>

	* configure configure.in: Added test for /dev/urandom and
	  index() in string.h or strings.h
	* backend/net.c: Fixed SANE_NET_AUTHORIZE call handling
	* doc/net.tex: Clarified definition of SANE_NET_AUTHORIZE, added
	  definition of MD5 authorization
	* doc/sane.tex: Upgraded to version 1.0.2, changed definition of
	  SANE_MAX_USERNAME_LEN & SANE_MAX_PASSWORD_LEN to 128 chars
	* doc/saned.man: added description of SANE_CONFIG_DIR/saned.users
	* doc/scanimage.man: added description of ~/.sane/pass and
	  --accept-md5-only
	* frontend/saned.c: implemented user authorization on a per backend
	  basis
	* frontend/scanimage.c: fixed bug (option -b wasn't present)
	  implemented auth_callback
	* lib/md5.c include/md5.h: added md5 functions from GNU textutils
	* include/sane/sane.h: changed definition of SANE_MAX_USERNAME_LEN &
	  SANE_MAX_PASSWORD_LEN to 128 chars
	* include/sane/sanei_auth.h sanei/sanei_auth.c: implemented new
	  SANE interface for user authorization using MD5 digest
	* lib/Makefile.in sanei/Makefile.in: updated Makefiles

2000-11-19  Karl Heinz Kremer <khk@khk.net>

	* backend/epson.c: Removed one debug output statement.

2000-11-19  Karl Heinz Kremer <khk@khk.net>

	* backend/epson.[ch]: Added support for "set focus position" command. This
	  command is necessary to scan via the TPU with the Expression1600.
2000-11-19  Henning Meier-Geinitz <hmg@gmx.de>

	* TODO: Removed entry about stiff.*. Updated entry about testing
	  saned.

2000-11-19  Jochen Eisinger <jochen.eisinger@gmx.net>

	* backend/mustek_pp.[ch]: replaced #include "sane/.." by
	  #include "../include/sane/.."

2000-11-19  Peter Kirchgessner <peter@kirchgessner.net>

        * frontend/stiff.c: Fix problem with writing Tag bits per sample
          for color tiff files.

2000-11-18  Jochen Eisinger <jochen.eisinger@gmx.net>

	* doc/sane-mustek_pp.man backend/mustek_pp.*: updated mustek_pp
	  backend to version 0.9-devel

2000-11-15  Henning Meier-Geinitz <hmg@gmx.de>

	* PROJECTS: Added entry about Visioneer OneTouch 8600.
	* TODO: Added entries about net backend crashing after timeout, stiff.c
	  problems, and more details about Irix cc jpeg problems.

2000-11-15  Rene Rebe <rene.rebe@gmx.net>
	* backend/avision.[c,h]: some fixes for brightness and contrast via
	  the gamma-table. New config-option to force the backend to use DIN A4
	  ("option force-a4"). Clean up.
	
2000-11-14  Rene Rebe <rene.rebe@gmx.net>
	* backend/avision.[h,c]: Added gamma table support in hardware.
	  Brightness and contrast emulation via the hardware gamma table.
	  Code cleanup.
	* AUTHORS: Changed my e-mail address.
	
2000-11-13  Henning Meier-Geinitz <hmg@gmx.de>

	* Makefile.in: Install sane.h and saneopts.h only.
	* PROJECTS: Removed sane-pie.
	* TODO: Removed sane-pie. Added possible portability problem for
	  artec. Removed entry about installed headers. Added entry about
	  gettext and libdl.
	* doc/.cvsignore: Added sane-pie.5.

2000-11-13  Simon Munton <simon@munton.demon.co.uk>

	* backend/pie.c backend/pie-scsidef.c backend/pie.conf backend/pie.desc
	  doc/sane-pie.man: Added Pacific Image Electronics backend for ScanAce
	  range of scanners (also supports DevCom BlackWidow scanners and ADLIB
	  JetScan scanners).
	* README backend/Makefile.in backend/dll.conf doc/Makefile.in: Added pie
	  backend.
	* sane.lsm: Added keywords for pie backend.
	* AUTHORS: Added myself as maintainer of pie backend.

2000-11-12  Henning Meier-Geinitz <hmg@gmx.de>

	* doc/sane.tex: Fixed a typo.
	* doc/.cvsignore: Added the files produced by make ps.
	* README: Removed X-frontends. Point to sane-frontends and website.
	  Some reformatting.
	* TODO: Updated concerning frontends split.
	* PROJECTS: Removed entries about frontends (now in 
	  sane-frontends/README)
	* PROBLEMS: Removed entries about frontends (now in
	  sane-frontends/PROBLEMS)
	
2000-11-10  Henning Meier-Geinitz <hmg@gmx.de>

        * sanei/sanei_constrain_value.c: If constraint_type is
	  SANE_CONSTRAINT_RANGE and quantization is used, the results may
	  be outside the limits of the range because quantization uses the
	  orginal value. Fixed by doing quantization with the already 
	  checked value.

2000-11-10 Gerhard Jaeger <g.jaeger@earthling.net>
	
	* backend/plustek.c backend/plustek.desc backend/plustek-share.h
      backend/plustek.h doc/sane-plustek.man:
	  updated to version 0.37 - support for xsane, new models
      document update, minor bugfixes

2000-11-08  Henning Meier-Geinitz <hmg@gmx.de>

	* TODO: Updated. Added entries for viceo backend and addition to hp
	  backend. Updated entries about the include issue. Added point about
	  additional options for pnm backend, install problem of libsane.la, 
	  and some build problems and the --without-x problem. Some more 
	  details for detecting older SANE versions. 

	* LEVEL2: Added entry about sending messages from backend to frontend.
	  Removed entry about image polarity.

	* backend/mustek.c backend/mustek.h backend/mustek.CHANGES 
      backend/mustek.desc: Update to Mustek backend 1.0-99. Better
	  transparency adapter support for ScanExpress scanners. Changed
	  color support for ScanExpress scanners (faster at some resolutions
	  now). Paragon 1200 SP color mode should work now without garbage at
	  the end of an image. Some bugfixes. Details in 
	  backend/mustek.CHANGES.
	
2000-11-08  Jochen Eisinger <jochen.eisinger@gmx.net>

	* include/sane/sanei_debug.h: fixed typo

2000-10-30  Henning Meier-Geinitz <hmg@gmx.de>

	* TODO: Updated. Added points about --without-x and the 
	  #include <sane...> stuff. Added xcam problem. Changed entry for
	  Relisys scanner.

2000-10-30  Petter Reinholdtsen <pere@td.org.uit.no>

	* frontend/xscanimage.c: Define GIMP_ENABLE_COMPAT_CRUFT when
	including gimp.h to use the old API.  Eventually we should convert
	the frontends to use the new Gimp API.  Patch from Kevin Dalley.

2000-10-29  Henning Meier-Geinitz <hmg@gmx.de>

	* TODO: Updated.
	
2000-10-23  Peter Kirchgessner <peter@kirchgessner.net>

        *backend/hp-accessor.c hp-device.c hp-handle.c hp-hpmem.c hp.h hp.c
                 hp-option.c  hp-scl.c: Change sanei_debug-interface
            Allocate accessors once (for fixed size accessors)
            Close connection in some error conditions

2000-10-23  Jochen Eisinger <jochen.eisinger@gmx.net>

	* backend/dll.c: added test for ``dll'' in dll.conf

2000-10-23  Jochen Eisinger <jochen.eisinger@gmx.net>

	* sanei/sanei_init_debug.c include/sane/sanei_debug.h
	  frontend/saned.c: removed vararg macros

2000-10-17  Henning Meier-Geinitz <hmg@gmx.de>
 
	* doc/sane.tex: Added paragraph about image polarity as discussed
	  on sane-devel. This is the version from Nick Lamb.
	
2000-10-15  Jochen Eisinger <jochen.eisinger@gmx.net>

	* include/sane/sanei_debug.h: sanei_debug_init was only declared
	  if VARARG macros are supported. Fixed this.

2000-10-08  Jochen Eisinger <jochen.eisinger@gmx.net>

	* sanei/sanei_pa4s2.c: fixed all but one compiler warning

2000-10-03  Henning Meier-Geinitz <hmg@gmx.de>

	* tools/find-scanner.c: Explicitly state that find-scanner won't
 	  find non-SCSI scanners.
	* doc/scanimage.man: Add examples for SANE device names.
	* frontend/scanimage.c: Output message when no devices are found.
	  Add example for devicename to --help message. Print warning
	  when a Unix devicename is used instead of a SANE device. Removed
	  compiler warning.
	* TODO: Removed entries about the fgets and include issues in
 	  umax. Removed entries about scanimage device name
 	  documentation. Added a point about xscanimage problems with the
 	  new GIMP API.
	* backend/mustek.* doc/sane-mustek.man: Update to Mustek backend
 	  1.0-98. Fixed segmentation fault in sane_init. Enabled double
 	  buffering. Clear inquiry buffer before using. Paragon 1200 SP now
 	  uses LD_BLOCK color correction. Removed LD MFS (wasn't used
 	  anymore). Fix sane_cancel for Paragon series II scanners. Fix
 	  halftone and grain for Paragon series II scanners. Backtracking is
 	  used automaticly by all scanners now. Some safety checks, code
 	  cleanup and more debug output. Details are in 
	  backend/mustek.CHANGES.

2000-10-02  Oliver Rauch <Oliver.Rauch@Wolfsburg.DE>

	* Updated umax backend to sane-umax-1.0.3-build-24
          take a look at backend/umax.CHANGES for details

2000-10-02  Oliver Rauch <Oliver.Rauch@Wolfsburg.DE>

        * sanei/sanei_constrain_value.c:
          if checked option is a range and the value is out of
	  range the value is now corrected to the minimum or maximum
	  allowed value and SANE_INFO_INEXACT is set.
	  The old version returned with an error. This caused problems
	  when the value was a little bit out of range because of rounding
          errors.

2000-09-30  Henning Meier-Geinitz <hmg@gmx.de>

	* backend/pnm.c: Fixed three segfaults due to buffer overruns:
 	  maximum length of filename wasn't checked; maximum length in
 	  sane_read wasn't always checked; ppm_type wasn't always set in
 	  getparmfromfile. Added some checks for safety and removal of
 	  warnings. Added DBG lines for every SANE API call.
	* TODO: Added entries about the backend:devicename issue. Add a
	  comment about fronends not to crash when length is -1. Added entry
 	  about sane-pie. Added point about fronends not checking if too 
	  much data is delivered with sane_read.
	* PROJECTS: Added entry about sane-pie.

2000-09-24  Henning Meier-Geinitz <hmg@gmx.de>

	* backend/mustek.*: Update to Mustek backend 1.0-97. This is a
       	  development version and is only tested for three-pass scanners.
  	  Added support for Paragon 1200 SP Pro and ScanExpress A3 SP.
  	  Removed detection of " C04" and " C12" (don't seem to exist).
  	  Changed SCSI request scheme. Sane_read can read more than 4096
 	  bytes from pipe. Minimum dpi is 30 now. Fixed LD correction for
 	  Paragon 1200SP 1.06 and 1.11.  Read SCSI buffer into big block and
 	  do LD after that for Paragon one-pass scanners. New option
 	  "blocksize" in mustek.conf. Better detection of the scanner type
 	  (three-pass, Paragon I, ...). Fixed possible segmentation faults
 	  in Paragon 600 II N LD code, scsi_sense_wait_ready and
 	  sense_handler. Decreased maximum scan size of Paragon 800 II
 	  SP. For three-pass scanners: fixed stop_scan and speed code, scan
 	  area is in pixels now, added RGB brightness and contrast, use
 	  +-100% for brightness and contrast. Return SANE_STATUS_CANCELLED
 	  when scan was cancelled. Option "force backtracking" is enabled by
 	  default, "scan speed" is set to "fastest". Added option
 	  "force-warn" for mustek.conf.  Rewrote halftone mode. Better error
 	  handling and more debug output.
	* TODO: Clarified point about image data polarity. Moved point about
	  xscanimage not updating the progress bar for 3pass scanners to
	  frontend section. Removed umax entry in "frontends". Removed entry
	  about alpha channel (was added to LEVEL2 file).
	* LEVEL2: Add point about image data polarity.
	* frontend/scanimage.c: Removed some warnings.
	
2000-09-19  Gerhard Jaeger <g.jaeger@earthling.net>

	* backend/plustek.desc doc/sane-plustek.man:
	  updated information about supported scanners	  

2000-09-18  Henning Meier-Geinitz <hmg@gmx.de>

        * README: Removed comment about xscanimage error message. Added
          comment about find-scanner (may find scanners not supported by
          SANE).
	* tools/README: Added comment about find-scanner and some lines
 	  about sane-desc.el and sane-config.
	* tools/find-scanner.c: Added comment about scanners not supported
 	  by SANE. Removed some warnings.
	* TODO LEVEL2: Removed xscanimage error comment from TODO and moved
 	  ideas for SANE 2.0 from TODO to LEVEL2.

2000-09-18  Petter Reinholdtsen <pere@td.org.uit.no>

	* backend/v4l.c: Remove X11 dependency.

2000-09-17  Henning Meier-Geinitz <hmg@gmx.de>
	
	* frontend/xscanimage.c: Fixed gtk_main_quit bug (based on patch
 	  from <moloch@nikocity.de>). An error message was printed when 
	  no sane device was found.

2000-09-17  Petter Reinholdtsen <pere@td.org.uit.no>

	* config.guess config.sub : Upgraded to latest version from
	<URL:ftp://ftp.gnu.org/pub/gnu/config/>.

	* doc/Makefile.in: New target 'install-docs' to install
	documentation in $(prefix)/doc/sane-<version>/.

	* japi/Makefile.in: Move javac and javah to make variables.

2000-09-16  Henning Meier-Geinitz <hmg@gmx.de>

	* TODO: Added xscanimage bug and information about versioning
 	  problems. Some other minor changes.

2000-09-15 Gerhard Jaeger <g.jaeger@earthling.net>
	
	* backend/plustek.c
	  added some code to support timing measurement in debug sessions

2000-09-10 Peter Kirchgessner <peter@kirchgessner.net>

        * backend/hp-handle.c
            Special handling of sane_cancel for OfficeJet K series

2000-09-09 Peter Kirchgessner <peter@kirchgessner.net>

        * backend/hp.h hp-scsi.h hp-scl.h hp-option.h hp-option.c
                  hp-device.h hp-scl.c hp.c hp-device.c hp-handle.c

          David Paschal (paschal@rcsis.com)
            Added support for flatbed HP OfficeJets.
          fix problem with cancel preview
          fix timing problem between killing child and writing to pipe
          change fprintf(stderr,...) to DBG
          change include <sane..> to "sane.." in hp.h
          change handling of options that have global effects.
            i.e. if option scanmode is received (has global effect),
            all options that "may change" are send to the scanner again.
            This fixes a problem that --resolution specified infront of
            --mode on command line of scanimage was ignored.
            NOTE: This change does not allow to specify --depth 12 infront of
            --mode color, because --depth is only enabled with --mode color.
          add depth greater 8 bits for mode grayscale
          add option for 8 bit output but 10/12 bit scanning

2000-08-24 Gerhard Jaeger <g.jaeger@earthling.net>

	* Updated plustek backend to support multiple devices and 12bit color-depth
	  affected files: backend/plustek.c backend/plustek.h 
	                  backend/plustek-share.h backend/plustek.conf
	* backend/plustek.desc: updated information about supported scanner
	* doc/sane-plustek.man: updated manpage according to the changes

2000-08-23 Abel Deuring <a.deuring@satzbau-gmbh.de>
	* sanei/sanei_scsi.c: Second attempt to fix the errno bug
	  in the Linux command queue handling. 

2000-08-19  Henning Meier-Geinitz <hmg@gmx.de>

	* TODO: Included TODO file for 1.0.4.
	* sanei/sanei_ab306.c: Removed some comiler warnings.
	* doc/sane.tex: Set \date to the date of the last change (not
	  the date of running latex (\today))
	* frontend/xscanimage.c: Fixed image size overrun (>ca. 400 MB). 
	  Removed some compiler warnings.
	
2000-08-15  Henning Meier-Geinitz <hmg@gmx.de>

	* configure configure.in: Default to --enable-warnings again.
	
2000-08-15  Jochen Eisinger <jochen.eisinger@gmx.net>

	* backend/mustek_pp.c: fixed bug in config_ccd_1013 that prevents
	ASIC 1013 scanners from working

2000-08-12  Petter Reinholdtsen <pere@td.org.uit.no>

	* configure.in aclocal.m4 configure NEWS: New version 1.0.3.
	Updated release date and removed freeze markers.

2000-08-12  Oliver Rauch <Oliver.Rauch@Wolfsburg.DE>
	* changed tools/sane-desc.el sane.gif->sane.png

2000-08-10  Henning Meier-Geinitz <hmg@gmx.de>
        * backend/avision.c: Changed // comment to /* */. This broke 
	  compilation on AIX cc, Irix cc and Sun cc.
	
2000-08-10  Rene Rebe <rene.rebe@myokay.net>
	* backend/avision.h: some updates + cleanups
	* backend/avision.c: use of DB () and sane_config_read ()
	  general cleanups (sorry for the big commit - I used Emacs auto-ident
	  for some regions ...)
	
2000-08-07  Henning Meier-Geinitz <hmg@gmx.de>
        
	* README.irix: Removed text about library version problems.
	* README.linux: Added comment about idescsi problems.
	* ltmain.sh: Changed Irix library version system (from Oliver Rauch).
	  This should fix the library version problems under Irix.
	* backend/Makefile.in: Added all files in lib/ to LIBLIB. This fixes
	  a bug concerning linking with external frontends.
	
2000-08-06  Henning Meier-Geinitz <hmg@gmx.de>
        
	* backend/plustek.c: Removed "const" from function header. This fixes
	  a compilation problem on aix/cc.
	* configure configure.in: Additional warnings are now disabled by
 	  default for the 1.0.3 realease.

2000-08-06  Henning Meier-Geinitz <hmg@gmx.de>
        
	* backend/hp4200.desc: Added description file for HP 4200 USB
	  scanner.

2000-08-05  Henning Meier-Geinitz <hmg@gmx.de>

	* AUTHORS: Added link to PROJECTS.
	* PROJECTS: Removed frontends that are included in the SANE 
	  distribution. Added frontends: sanecgi, scanadf. Removed backends
 	  Kodak DS-20 (old camera, no specs available, not interested anymore),
 	  Logitech (old handscanner, author not interested anymore). Added
 	  backends as6e (Artec AS6E), bh (Bell and Howell Copiscan), lhii
	  (handheld scanner support), Mustek USB, nec (NEC  PC-IN500/4C),
	  v4l2 (Video for Linux 2). Added/updated information about SANE
	  ports: BeOS, OS/2, win32. Added Information about WinSANE and
	  TWAIN interface for xsane-win32. Added link to AUTHORS and README.
 	  Changed format. Added explanation for statuses.
	* README: Added link to PROJECTS.
	* README.irix: New file. Information about the library version and
	  jpeg library problems.
	* backend/as6e.desc: New description file for the Artec AS6E.
	* backend/bh.desc: New description file for Bell and Howell Copiscan
	  scanners.

2000-08-03  Henning Meier-Geinitz <hmg@gmx.de>

	* PROJECTS: Removed backends that are included in SANE. Updated
	  info for Primax. Added HP 4200.

2000-08-02  Henning Meier-Geinitz <hmg@gmx.de>
	* NEWS: Updated backend versions.
	* backend/hp*.c: Changed include statements from #include <sane/...>
 	  to #include "sane/...".

2000-08-02  Petter Reinholdtsen <pere@td.org.uit.no>

	* backend/v4l.c: Check return value of ioctl() calls.  Use DBG()
	instead of syslog() report progress.  Removed redundant check for
	trailing newline in config file as we are now using
	sanei_config_read().  Remove ioctl(VIDIOCSYNC), as it hangs on my
	v4l2 device.

2000-07-31  Henning Meier-Geinitz <hmg@gmx.de>
	* backend/mustek.*: Update to Mustek backend 1.0-96. Fixed Problem
	  with detecting some three-pass scanners.
	
2000-07-31  Henning Meier-Geinitz <hmg@gmx.de>
        * doc/sane.tex: Chapter 4 said, that this was standard version
	  0 (draft). Changed to 1 and removed "(draft)".
	
2000-07-31  Henning Meier-Geinitz <hmg@gmx.de>
        * sanei/sanei_DomainOS.c sanei/sanei_ab306.c sanei/sanei_codec_ascii.c
 	  sanei/sanei_codec_bin.c sanei/sanei_config.c sanei/sanei_config2.c
	  sanei/sanei_constrain_value.c sanei/sanei_init_debug.c 
	  sanei/sanei_load_values.c sanei/sanei_net.c sanei/sanei_pa4s2.c
	  sanei/sanei_pio.c sanei/sanei_save_values.c sanei/sanei_scsi.c
	  sanei/sanei_thread.c sanei/sanei_wire.c sanei/test_wire.c: Changed 
	  include statements from #include <sane/...> to #include "sane...".
	* PROBLEMS: Updated Mustek entry.
	* TODO: Updated some entries that are done.
	* backend/avision.c backend/plustek.c: Changed include statements from
 	  #include <sane/...> to #include "sane...".
	
2000-07-30  Peter Kirchgessner <peter@kirchgessner.net>

        * backend/hp.desc: Change Parallel to Parport in description

2000-07-30  Oliver Rauch <Oliver.Rauch@Wolfsburg.DE>
	* changed all <config.h> to "config.h" in lib/*.c

2000-07-30  Henning Meier-Geinitz <hmg@gmx.de>
	
	* backend/mustek.*: Update to Mustek backend 1.0-95. Changed from
	  wait() to waitpid() and removed unused code.
	* configure configure.in backend/m3096g.c backend/sp15c.c: Reverted
	  the V_REV patch. V_REV should not be used in backends.

2000-07-30  Henning Meier-Geinitz <hmg@gmx.de>
        
	* configure configure.in: Add V_REV to CPPFLAGS (only V_MAJOR and 
	  V_MINOR were defined until now).
	* doc/.cvsignore: Added sane-coolscan.5.

2000-07-29  Henning Meier-Geinitz <hmg@gmx.de>
	
	* backend/sp15c.c backend/m3096g.c: Replace fgets with 
	  sanei_config_read, return V_REV as part of version_code string 
	  (patch from Randolph Bentson).

2000-07-29  Chris Pinkham <cpinkham@infi.net>

	* backend/artec.c: Changed include statements from #include <sane/...>
	  to #include "sane...".

2000-07-29  Henning Meier-Geinitz <hmg@gmx.de>

	* backend/GUIDE: Added some comments about portability and
	  documentation.
	* backend/abaton.c backend/agfafocus.c backend/apple.c 
	  backend/canon.c backend/coolscan.c backend/dc210.c backend/dc25.c
	  backend/dll.c backend/dmc.c backend/microtek.c backend/microtek2.c
 	  backend/microtek2.c backend/mustek_pp.c backend/net.c backend/pint.c
	  backend/pnm.c backend/qcam.c backend/ricoh.c backend/s9036.c
	  backend/sane_strstatus.c backend/sharp.c backend/snapscan.c 
	  backend/st400.c backend/stubs.c backend/tamarack.c backend/v4l.c:
	  Changed include statements from #include <sane/...> to 
	  #include "sane...".
	* backend/avision.c backend/dc25.c: Use DBG(0, ...) instead of
 	  fprintf (stderr, ...)
	* backend/avision.c backend/canon-sane.c backend/coolscan.c
	  backend/dc25.c backend/microtek.c backend/microtek2.c
 	  backend/st400.c: Use sanei_config_read() instead of fgets().
	* backend/coolscan.desc backend/microtek.desc backend/microtek2.desc
	  backend/st400.desc: Added :interface and :manpage entries.
	* backend/nec.desc: Status is beta now (was: new). Fixed typo.
	* doc/canon.README: Removed, because the information is included in
 	  the manpage now.
	* doc/Makefile.in: Added sane-coolscan to list of mapages to install.
	* README: Added Link to coolscan manpage.
	* backend/mustek.*: Update to Mustek backend 1.0-94. Fixed the
	  #include <sane/...> bug.
	
2000-07-29  Karl Heinz Kremer <khk@khk.net>

	* backend/epson.c: Changed the include statements for SANE includes
	  from #include <...> to #include "..."

2000-07-28  Chris Pinkham <cpinkham@infi.net>

	* backend/aretc.c: Corrected sane_close() bug.  Converted to use
	  sanei_config_read() instead of fgets().
	* backend/artec.desc: Changed interface entry to "Parport" vs "Parallel"

2000-07-28  Henning Meier-Geinitz <hmg@gmx.de>

	* ltmain.sh: Added underscore to sed expression for removing
 	  backendname from soname (needed for libsane-mustek_pp).
	* sane.lsm: Added keywords for new backends.
	* lib/isfdtype.c: Added implementation for platforms that lack
	  isfdtype() (mostly from Olly Betts).
	* backend/v4l.desc: Activated man page entry.
	* backend/mustek.* doc/sane-mustek.man: Update to Mustek backend
 	  1.0-93. Fixed color scanning for Paragon 600 II N firmware 1.02.
	  Fixed possible segfault in sane_control_option() when info is 0.
	  Removed some compiler warnings.
	* NEWS: Updated Mustek backend version, added Artec, fixed typo
 	* doc/Makefile.in doc/sane-snapscan.man doc/sane-canon.man README
 	  backend/snapscan.desc backend/canon.desc backend/.cvsignore:
 	  Added manpage for canon and snapscan backends. Added :interface
 	  entry for canon.
	* backend/canon-sane.c: Fixed possible segfault in 
	  sane_control_option() when info is 0.
	
2000-07-22  Petter Reinholdtsen <pere@td.org.uit.no>

	* backend/v4l.c: Bugfix: Avoid crashing in
	sane_control_option() when last param is NULL.

2000-07-25  Chris Pinkham <cpinkham@infi.net>

	* backend/artec.c: Updated to v0.5.14. Added "Negative" mode as option
	  even when in color/greyscale modes.  Fix sane_close() bug.  Fixed bug
	  in sane_get_option_descriptor that allowed invalid option number.
	  Changed numerous int variables to size_t to eliminate warnings.
	  Changed various elements in ARTEC_Scanner structure to SANE_Int
	  instead of int.  Replaced all fprintf() statements with DBG().
	* backend/artec.desc Added interface entries.

2000-07-26  Karl Heinz Kremer <khk@khk.net>

	* backend/epson.c: Fixed problem with Perfection610 scanner.
	  The variable s->color_shuffle_line was not correctly initialized.
	* backend/epson.desc: Updated version number

2000-07-26  Oliver Rauch <Oliver.Rauch@Wolfsburg.DE>
	* added info about variable scsi buffer sizes defined by backends
	  umax, mustek, sharp (via sanei_scsi_open_extended()) to
	  man sane-scsi

2000-07-25  Henning Meier-Geinitz <hmg@gmx.de>
        
	* backend/snapscan.c: Use DBG(0, ...) instead of fprintf (stderr, ...) 
	* backend/abaton.c backend/agfafocus.c backend/apple.c backend/dc210.c
 	  backend/dll.c backend/dmc.c backend/microtek2.c backend/pint.c
	  backend/qcam.c backend/ricoh.c backend/s9036.c backend/snapscan.c
	  backend/tamarack.c: Use sanei_config_read instead of fgets.
	* backend/dc210.c backend/microtek.c backend/pnm.c: Added 
	  #include <sane/config.h>.
	* backend/dc25.c backend/m3096.c backend/m3096g.c backend/sp15.c
 	  backend/st400.c: Moved #include <sane/config.h> to the beginning.
	* AUTHORS: Changed agfa to agfafocus.
	
2000-07-25  Peter Kirchgessner <peter@kirchgessner.net>

        * backend/hp.c hp-scl.c hp-option.c hp-handle.c hp-accessor.c
          remove inline stuff

2000-07-25  Henning Meier-Geinitz <hmg@gmx.de>

	* configure.in configure include/sane/config.h.in 
	  include/sane/sanei_backend.h: Moved test for u_int* to configure.
	* include/sane/sanei_debug.h: Remove #warning (Irix compiler doesn't
	  like this)
	* backend/mustek.* doc/sane-mustek.man: Update to Mustek backend
	  1.0-92. Changed linedistance correction for MFS-8000SP. Fixed 
	  margin positions and removed warning for MFS 6000CX. Warning is
 	  printed in debug level 0 again. Removed test for gamma length. 
	  Fixed (partly) ADF handling. Man page update. More details in
	  mustek.CHANGES.
	* NEWS: updated for new Mustek backend version.

2000-07-20  Peter Kirchgessner <peter@kirchgessner.net>
        * backend/hp.c: use sanei_config_read() instead of fgets
        * backend/hp-scl.c: Dont write chars < 32 to DBG

2000-07-20  Abel Deuring <a.deuring@satzbau-gmbh.de>
	* backend/sharp.c: removed fgets-call + minor bugfix
	* backend/sharp.desc: added entry ":manpage"
	* sanei/sanei_scsi.c: added missing dummy function 
	  sanei_scsi_req_flush_all_extended

2000-07-18  Henning Meier-Geinitz <hmg@gmx.de>
        
	* configure.in configure: Fixed --enable-warnings to work as 
	  advertised.

2000-07-18  Petter Reinholdtsen <pere@td.org.uit.no>

	* configure.in configure include/sane/config.h.in lib/Makefile.in
	lib/getenv.c lib/isfdtype.c lib/vsyslog.c
	sanei/sanei_init_debug.c: OS/2's getenv() is useless, OS/2,
	Solaris and AIX is missing isfdtype() and AIX is missing
	vsyslog().  Implement replacement functions.

2000-07-17  Henning Meier-Geinitz <hmg@gmx.de>
        
	* backend/snapscan.c backend/snapscan-scsi.c: Replace C++ comment 
	  with C comment.

2000-07-17  Henning Meier-Geinitz <hmg@gmx.de>
        
	* include/sane/sanei_backend.h: Replace C++ comment with C comment.
	
2000-07-17  Henning Meier-Geinitz <hmg@gmx.de>
        
	* backend/musteka4s2.desc: Removed. Now that the mustek_pp
	  backend is part of SANE musteka4s2 is no longer neccessary.
	  If somebody really wants to use the old musteka4s2 sources
	  he will find a link on the mustek_pp WWW page.

2000-07-16  Jochen Eisinger <jochen.eisinger@gmx.net>

	* backend/mustek_pp.c: Replaced fgets() with sanei_config_read()

2000-07-16  Petter Reinholdtsen <pere@td.org.uit.no>

	* include/sane/sanei_debug.h:  Fix typo.

2000-07-15  Karl Heinz Kremer <khk@khk.net>

	* backend/epson.c: Replaced fprintf() with DBG()

	* backend/epson.desc: updated version number

2000-07-15  Henning Meier-Geinitz <hmg@gmx.de>
	
        * backend/dc210.c: Replaced fprintf (stderr, ...)  by DBG ().

2000-07-15  Henning Meier-Geinitz <hmg@gmx.de>
	
        * doc/Makefile.in doc/sane-dc210.man doc/sane-v4l.man 
	  doc/.cvsignore: Added manpages for dc210 and v4l. These
	  are just standard manpages. Please check and update them.

	* README: Added dc210, v4l and mustek_pp entries.

2000-07-15  Henning Meier-Geinitz <hmg@gmx.de>

	* backend/mustek.* doc/sane-mustek.man: Update to Mustek backend
 	  1.0-90. Fixed linedistance-handling for Paragon 8000SP. Fixed
	  mustek.conf port entry. Updated man page (parallel port 
	  scanners and 600 II N).

	* NEWS: Updated (mustek backend version 1.0-90)

	* backend/dll.conf: Commented out mustek_pp on behalf of the
	  maintainer

	* doc/.cvsignore: added sane-mustek_pp.5, sane-plustek.5 and
	  sane-st400.5
	  
2000-07-15  Andreas Rick <andreas.rick@free.fr>

	* backend/coolscan.c: added missing initialization in 
	coolscan_read_data_block()	

2000-07-13  Petter Reinholdtsen <pere@td.org.uit.no>

	* AUTHORS backend/dll.conf backend/Makefile.in backend/mustek_pp.c
	backend/mustek_pp.desc backend/mustek_pp.h backend/mustek_pp.conf
	doc/Makefile.in doc/sane-mustek_pp.man: New backend for
	ScanExpress 6000 P, ScanMagic 4800 P, 600 III EP Plus, ScanExpress
	600 SEP and MD9848 from Jochen Eisinger.

	* backend/snapscan-310.c backend/snapscan-scsi.c
	backend/snapscan-sources.c backend/snapscan-sources.h
	backend/snapscan-utils.c backend/snapscan.c backend/snapscan.desc
	backend/snapscan.h: New snapscan backend version dated 20000514
	from Steve Underwood.

	* backend/microtek2.h backend/microtek2.c backend/microtek2.desc:
	Add support for ScanMaker X6USB.  Patch from Oliver Neukum.

	* README.os2 configure.os2 include/sane/sanei_backend.h
	sanei/os2_srb.h sanei/sanei_init_debug.c backend/dll.c
	backend/net.c frontend/saned.c : Some of the OS/2 patches from
	Yuri Dario.

	* frontend/saned.c: Correct cancel handling in saned.  Patch from
	Jochen Eisinger.

2000-07-12  Ingo Wilken <Ingo.Wilken@informatik.uni-oldenburg.de>

	* frontend/scanimage.c, doc/scanimage.man: Support for
	  environment variable SANE_DEFAULT_DEVICE.
	
2000-07-11  Ingo Wilken <Ingo.Wilken@informatik.uni-oldenburg.de>

	* backend/st400.c, backend/st400.conf, backend/st400.h,
	doc/sane-st400.man: new files
	* backend/st400.desc: updated information
	* README, backend/Makefile.in, doc/Makefile.in: added st400 backend
	* AUTHORS: added myself as maintainer of st400 backend
	
2000-07-09  Peter Kirchgessner <peter@kirchgessner.net>

	* doc/sane-hp.man: Updated manual page (scantype --> scan source)

2000-07-09  Peter Kirchgessner <peter@kirchgessner.net>

	* backend/hp-handle.c, hp-scl.c, hp-scl.h, hp.c, hp.h, hp-option.c
              hp-option.h: Add wait for front panel button

	* backend/hp.desc: Changed version to 0.88

2000-07-09  Andreas Rick <andreas.rick@free.fr>

	* AUTHORS: added myself as maintainer of the coolscan backend

	* README: added Coolscan page link

	* doc/sane-coolscan.man: first version of Coolscan manpage

2000-07-09  Gerhard Jaeger <g.jaeger@earthling.net>

	* AUTHORS: added myself as maintainer of the Plustek backend

	* README: added Plustek manpage entry

	* backend/plustek.desc: updated description

	* backend/plustek.c backend/plustek.h backend/plustek-share.h 
	  backend/plustek.conf: added Plustek backend code 

	* backend/Makefile.in doc/Makefile.in backend/dll.conf: 
	  added plustek entries

	* doc/sane-plustek.man: added manpage for Plustek backend

2000-07-09  Petter Reinholdtsen <pere@td.org.uit.no>

	* sanei/sanei_thread.c: Add required include files to get this to
	compile almost without warnings on Unix.

	* frontend/Makefile.in frontend/scanimage.c frontend/stiff.h
	frontend/stiff.c doc/scanimage.man: Add 16 bit support and new
	option --format to change file format.  Makes it possible to save
	uncompressed TIFF images.  Patch from Peter Kirchgessner.

	* backend/microtek2.c: Add ScanMaker X6USB identifier.  Patch from
	Oliver Neukum.

2000-07-07  Petter Reinholdtsen <pere@td.org.uit.no>

	* acinclude.m4 configure.in aclocal.m4 configure: New autoconf
	test SANE_V4L_VERSION.

	* AUTHORS: Added myself as CVS repository maintainer.

	* include/sane/sanei_debug.h sanei/sanei_init_debug.c: Send debug
	messages to syslog if stderr is a socket.

2000-07-06  Petter Reinholdtsen <pere@td.org.uit.no>

	* configure configure.in: Change "you're" to "you are" to avoid
	confusing emacs font-lock mode.  Regenerated configure.

	* backend/v4l.c: Fix sane_close() bug.

2000-07-02  Peter Kirchgessner <peter@kirchgessner.net>

        * backend/hp.desc added interface entries

        * backend/hp.c, backend/hp-handle.c
          ADF-support for ScanJet IIp
          Return error SANE_STATUS_NO_DOCS if no paper in ADF

2000-06-30  Henning Meier-Geinitz <hmg@gmx.de>

	* backend/mustek.* Update to Mustek backend 1.0-89. Fixed "scan 
	  slider doesn't return to start" bug. Details in
 	  backend/mustek.CHANGES.

	* backend/nec.desc backend/dc25.desc backend/m3096g.desc: Added
	  :interface entries. Updated email adderess.

2000-06-28  Karl Heinz Kremer <khk@khk.net>

	* backend/epson.c Fixed sane_close() - when the scanner still had
	  data to deliver at the time the scanner was closed, it was impossible
	  to restart any frontend software. This also caused scanimge -T to
	  work just once.

2000-06-28  Henning Meier-Geinitz <hmg@gmx.de>

	* backend/mustek.* Update to Mustek backend 1.0-88. Small bugfixes.
	  Details in backend/mustek.CHANGES.

	* backend/sp15.desc backend/dc25.desc backend/m3096g.desc: Added
	  :interface entries.
	
2000-06-28  Oliver Rauch
	* Updated umax backend to version 1.0.21
          take a look at backend/umax.CHANGES for details
          - updated umax.desc, umax manpage
           
2000-06-28  Abel Deuring
	* backend/sharp.esc: added "interface" entries

2000-06-28  Henning Meier-Geinitz <hmg@gmx.de>

	* backend/pint.c: fixed sane_close bug

	* backend/microtek.c: fixed compilation problem with NDEBUG
 	  defined

2000-06-27  Henning Meier-Geinitz <hmg@gmx.de>

	* backend/lhii.desc: added :interface
	* README.linux: added reference to Linux SCSI documentation (from
	  Abel Deuring)

2000-06-26  Henning Meier-Geinitz <hmg@gmx.de>
	
	* backend/musteka4s2.desc: Added all more scanners and
	  :interface entries
	* backend/sagitta.desc: Removed on behalf of the author. Nobody
	  has showed interest in this very old (and rare) scanner over
 	  the years. It's difficult to keep it up-to-date because a kernel
	  module is neccessary. Nobody volunteered to take over 
	  maintainership.
	* backend/tamarack.c: Changed all fprintf to DBG calls.
	  
2000-06-26  Abel Deuring <a.deuring@satzbau-gmbh.de>
	* sanei/sanei_scsi.c and include/sanei/sanei_scsi.h: 
	  new functions sanei_scsi_cmd2 and sanei_scsi_req_enter2 
	  for proper handling of "unusual" SCSI commands lengths
	* backend/canon-scsi.c: call sanei_scsi_cmd2, where necessary

2000-06-25  Ren<65> Rebe <rene.rebe@myokay.net>
	* backend/avision.c: fixed sane_close () bug
	* backend/avision.desc: added some more scanners
	
2000-06-25  Henning Meier-Geinitz <hmg@gmx.de>

	* backend/mustek.* doc/sane-mustek.man: Update to Mustek backend
	  1.0-87. Fixed gamma correction for 1200 A3 Pro. Fixed dependancy
 	  of mustek.h on sane-backends.h. Fixed debug output bug in 
	  fix_linedistance_se. Updated documentation and mustek.conf.

	* README: Added v4l and fixed typo.

2000-06-25  Karl Heinz Kremer <khk@khk.net>

	* backend/epson.desc - Changed Parallel to Parport

2000-06-25  Henning Meier-Geinitz <hmg@gmx.de>

        * doc/Makefile.in doc/sane-s9036.man doc/sane-tamarack.man 
	  doc/sane-ricoh.man doc/sane-avision.man doc/xcam.man .cvsignore:
 	  Added manpages for these backends and xcam.

	* frontend/xcam.README: removed because manpage now exists.

	* backend/plustek.desc backend/qcam.desc backend/ricoh.desc
	  backend/s9036.desc backend/tamarack.desc backend/avision.desc
	  backend/st400.desc: Updated :interface and :manpage information.

	* README: Updated information regarding documentation.

	* backend/tamarack.c: Changed printf(...) to fprintf(stderr,...)
	  on behalf of the maintainer.

2000-06-25  Petter Reinholdtsen <pere@td.org.uit.no>

	* backend/Makefile.in backend/v4l.desc backend/v4l.c: V4L backend
	corrections. Corrected dependencies.  Removed () in version
	number, as this backend is now included in the distribution.  More
	debug info and use sanei_config_read() instead of fgets() in
	backend.

2000-06-23  Karl Heinz Kremer <khk@khk.net>

	* backend/epson.desc - added :interface information

2000-06-23  Petter Reinholdtsen <pere@td.org.uit.no>

	* AUTHORS: Added Juergen G. Schimmer as author of the v4l backend.

	* configure.in backend/Makefile.in backend/dll.conf
	backend/v4l-frequencies.h backend/v4l-grab.h backend/v4l.c
	backend/v4l.conf backend/v4l.desc backend/v4l.h: Added Video4Linux
	backend from Juergen G. Schimmer.

2000-06-22  Henning Meier-Geinitz <hmg@gmx.de>

        * include/sane/sanei_pa4s2.h sanei/sanei_pa4s2.c Makefile.in 
	  backend/Makefile.in sanei/Makefile.in: Added interface for
	  Mustek parallel port scanners (from Jochen Eisinger 
	  <jochen.eisinger@gmx.net>). This will be used by the Mustek
	  parallel port backend mustek_pp (coming soon).

	* tools/sane-desc.el backend/template.desc.: Added support for
	  "interface" column in sane-desc.el. The new keyword is 
	  ":interface", examples in "template.desc.". All maintainers
	  should update their *.desc files.

	* backend/mustek.desc abaton.desc agfafocus.desc apple.desc 
	  dc210.desc dmc.desc qcam.desc ricoh.desc s9036.desc snapscan.desc
	  tamarack.desc: added interface entry for the Mustek and 
	  unmaintained backends.

	* backend/abaton.c apple.c qcam.c tamarack.c: fixed sane_close ()
 	  bug for the unmaintained backends.
	
2000-06-18  Henning Meier-Geinitz <hmg@gmx.de>
        
	* backend/mustek.* doc/sane-mustek.man: Update to Mustek backend
          1.0-86. Added support for Mustek Paragon 1200 A3 pro (1, 8, and 24
          bit/pixel; calibration doesn't work yet). Removed some remainings
          of color lineart and halftone support. More debugging
          output. Fixed bug in sane_control_option (option was not checked
          for negative values).  Fixed bug in sane_close. General code
          cleanup. Details in backend/mustek.CHANGES.

2000-06-13  Karl Heinz Kremer <khk@khk.net>
	* backend/epson.*: Invert image when scanning negative off the TPU.
	  Initialize optial_res to 0. Fix sane_close() bug. Make threshold
	  only active when halftoning is off and scan depth is 1. Make
	  film type only active when TPU is selected. Scanner based
	  color correction. More constraints for GUI. Cleanup in option
	  handling.

2000-05-21  Henning Meier-Geinitz <hmg@gmx.de>
        
	* backend/mustek.*: Update to Mustek backend 1.0-85. Added double
 	  buffering. This may improve scan performance a bit. Removed
	  dead code (in dev_read_start). Changed linedistance correction 
	  handling. Paragon 12000 SP color mode might work now with all 
	  firmware versions. Details in backend/mustek.CHANGES.

2000-05-27  Karl Heinz Kremer <khk@khk.net>
	* backend/epson.[ch] Support for multiple EPSON scanners added
	  Fixed Perfection 610 color problem

2000-05-26  Abel Deuring <a.deuring<6E>satzbau-gmbh.de>
	* sanei/sanei_scsi.c: Fixed a bug in the Linux queue handling,
	  as suggested by Simon Munton

2000-05-22  Oliver Rauch <Oliver.Rauch@Wolfsburg.DE>
        * ltconfig: Added option "-X" to ldconfig for linux-gnu
          this solves the problem with link /usr/local/libs/sane/libsane.so.1 => libsane-umax.so.1

2000-05-21  Henning Meier-Geinitz <hmg@gmx.de>

        * README: Added quick install. Removed list of supported platforms
          because it is unknown how accurate it is at the moment. Added 
          description for --enable-scsibuffersize (partly from Abel
          Deuring). Removed operating system specific information. See
          README.* files instead. Added comment to read the PROBLEMS file.
          Added/changed list of available documentation. Added comment on 
          possible causes for the frontends not detecting scanners. Added
          comment on tools directory. Headings should be easier to find now.
      
        * README.aix: New file. Extracted from README.

        * README.hp-ux: New file. Extracted from README.

        * README.linux: New file. What is needed to get SCSI scanners to
          work under Linux. Workaround for Adaptec 1542 users (from Abel
          Deuring)
	
2000-05-18  Henning Meier-Geinitz <hmg@gmx.de>
	
	* backend/mustek.* doc/sane-mustek.man: Update to Mustek backend
	  1.0-82. Added shrinked image fix to ScanExpress 12000SP models
	  <= v2.0. Fixed remaining sane_cancel problems (in non_blocking
	  mode). Fixed color stripes and segmentation fault for Paragon
	  MFS-12000SP 1.00 (at least for me). Some minor debug output
	  additions and changes. Look at backend/mustek.CHANGES for more
	  details.

	* doc/.cvsignore: Added missing sane-sharp.5
	
2000-05-07  Henning Meier-Geinitz <hmg@gmx.de>

        * backend/mustek.* doc/sane-mustek.man: Update to Mustek backend
	  1.0-81. Added transparency adapter (TA) support for all Mustek
 	  scanners. Fixed shrinked image bug for the ScanExpress 6000SP.
 	  Removed unused options (3-pass scanners and 600 II N). Scan
	  source selection now shows only the options currently available.
	  Fixed a bug concerning the ADF handling. sane_init () now uses
	  sanei_config_read () and sanei_config_get_string () instead of
	  its own functions. Man page and .desc update. Look at 
	  backend/mustek.CHANGES for more details.

2000-04-27  Karl Heinz Kremer <khk@khk.net>

	* backend/epson.* Some code cleanup, added support for GRB
	  images and did some Gamma correction fixes for the Perfection
	  610.

2000-04-27  Petter Reinholdtsen <pere@td.org.uit.no>

	* include/sane/sanei_debug.h: Bugfix.  Make sure the source
	compiles even if NDEBUG is defined.

2000-04-23  Henning Meier-Geinitz <hmg@gmx.de>

        * backend/mustek.* doc/sane-mustek.man: Update to Mustek backend
 	  1.0-80. Adjusted scan areas for most scanners. Added transparency
 	  adapter support for all Paragon legal size scanners. Fixed color
 	  mode for the Paragon MFS-8000SP (gamma problems). New system to
 	  set buffersize using sanei_scsi_open_extended. Removed (maybe
 	  temporarily) support for SCSI queue. Fixed shrinked image bug with
 	  the ScanExpress 12000SP. Fixed positional options detection
	  (from mustek.conf). Added option "buffersize". Adjusted
 	  mustek.conf template to more reasonable defaults. Lots of
	  small fixes and more complete debugging output. Look at
          backend/mustek.CHANGES for more details.
	
2000-04-15  Andreas Rick  <andreas.rick@free.fr>

        * backend/coolscan.* Update coolscan backend to version 0.4.3.
	  This version includes support for the newer Nikon Coolscan
	  models LS-30 and LS-2000. Dustremoval is not yet included.
	
2000-04-09  Henning Meier-Geinitz <hmg@gmx.de>

        * backend/mustek.* doc/sane-mustek.man: Update to Mustek backend 
	  1.0-79. Changed version system. Linedistance correction for
	  the 600 II N is fixed. Added output of scanning time. Rewrite
	  of the resolution encoding for the 3-pass scanners. Look at
	  backend/mustek.CHANGES for details.
	
2000-04-05  Oliver Rauch <Oliver.Rauch@Wolfsburg.DE>
	* Updated umax backend to version 1.0.2-build-20
          take a look at backend/umax.CHANGES for details

2000-04-05  Henning Meier-Geinitz <hmg@gmx.de>

	* frontend/xscanimage.c, frontend/preview.c: Fixed a small bug 
	concerning 3-pass scanners. gdk_input_add() was called three times
	without a preceding gdk_input_remove().

	* frontend/scanimage.c: Fixed a bug where the scan was cancelled
	after a test for low mem even if enough memory is available. This
	probably only affected 3-pass scanners.
	
2000-04-02 Henning Meier-Geinitz <hmg@gmx.de>

        * backend/mustek.*: Update to Mustek backend 0.78. Fixed several
	small bugs and spelling errors. Adjusted scanner names to Mustek
        style. Inquiry is even more verbose now. Look at
        backend/mustek.CHANGES for details.
      
2000-03-27  Karl Heinz Kremer <khk@khk.net>
	* backend/epson.c  backend/epson.desc: Removed
	  status request for push button. This caused an
	  error on older scanners. Fixed a few typos in
	  the .desc file and added GT-9000 scanner.

2000-03-23  Oliver Rauch <Oliver.Rauch@Wolfsburg.DE>
	* updated umax backend to version 1.0 build 19
	  for details read backend/umax.CHANGES

2000-03-22  Karl Heinz Kremer <khk@khk.net>
      * backend/epson.*: Several fixes for minor problems.
        Fixed function level A4 scanners (line mode instead
        of byte mode). Removed unnecessary free() calls.
        Use extended status for recognize warm up. This fixes
        problems with TPU and occasional crashes during startup.
        Added D1 level for Perfection 610.
        Added first version of support for set threshold and set
        zoom.                            

2000-03-19  Henning Meier-Geinitz <hmg@gmx.de>

	* backend/mustek.c: Updated backend to new version 0.76. Fixes for
 	600 II N (color stripes, cancel handling), ScanExpress ("XC06" is
 	now recognized), MFS-1200SP (linedistance correction in high
 	resolutions, patch from Andreas Beck), STORE makros (patch from
 	Norbert Mueller), ADF (patch from Joerg Anders), firmware
 	identification (patch from Marco G. Salvagno), sane_cancel (scan
 	will now be cancelled immediately, no new sane_read necessary),
 	sane_get_option_descriptor (test for option < 0). Added a more
 	verbose inquiry output. Adjusted debug levels. Changed the model
 	names (sane.model) to reflect the real scanner names. Removed some
 	compiler warnings. Added new maintainer.

	* backend/mustek.desc: Added link to backend homepage. Added all
 	the different scanner names used for the same model. Added Trust
 	scanners known to work. Removed firmware versions and scanner ids. 

	* backend/mustek.CHANGES: New file. More detailed changes for the
 	Mustek backend.
	
	* doc/sane-mustek.man: Documentation for the 600 II N linedistance
 	options. Added warning from PROBLEMS. Added link to backend homepage.
	Changed supported scanners list (see mustek.desc). Added more bug
	entries.

	* AUTHORS: Added new maintainer and email address
	
2000-03-18  Petter Reinholdtsen <pere@td.org.uit.no>

	* backend/Makefile.in tools/libtool-get-dll-ext: New script to
	detect shared library endings without using 'rev' which is missing
	on some platforms.

2000-03-14  Petter Reinholdtsen <pere@td.org.uit.no>

	* sanei/sanei_scsi.c: Test for 'USE == LINUX_INTERFACE' instead of
	defined(__linux__).

2000-03-14  Abel Deuring <a.deuring@satzbau-gmbh.de>
	
	* new version of ths Sharp backend (0.31): added support for the
	JX350 (Thanks to Shuhei Tomita for providing the patch)

2000-03-07  Petter Reinholdtsen <pere@td.org.uit.no>

	* Makefile.in (lsm) sane.lsm sane-1.0.1.lsm: New target to
	generate Linux Software Map (LSM) entry from template.  Remove old
	file.
	
2000-03-06  Petter Reinholdtsen <pere@td.org.uit.no>

	* configure.in configure: New version is 1.0.2.

2000-03-01  Abel Deuring <a.deuring@satzbau-gmbh.de>
	* doc/sane-scsi.man: fixed an ambiguity and a typo.

2000-02-27  Petter Reinholdtsen <pere@td.org.uit.no>

	* backend/v4l*.desc: Changed description from v4l to Video For
	Linux.

	* backend/lhii.desc: Updated with URL to LHII drivers home page.

	* README.unixware7: Added compile information for SCO UnixWare 7
	from Jens Scheithauer.

2000-02-26  Karl Heinz Kremer <khk@khk.net>

	* doc/sane-epson.man: Updated documentation for EPSON
	backend.

2000-02-26  Chris Pinkham <cpinkham@infi.net>

	* backend/artec.desc: updated statuses, added link to a webpage for
	AS6E parallel models, added manpage info.

2000-02-26  Abel Deuring <a.deuring@satzbau-gmbh.de>
	* Sharp man page updated; man page added to doc/Makefile.in

2000-02-26  Petter Reinholdtsen <pere@td.org.uit.no>

	* configure.in: Don't use -ansi and -pedantic unless
	--enable-warnings is used.  Warnings are now disabled by default
	to prepare for the next release.
	
2000-02-24  Petter Reinholdtsen <pere@td.org.uit.no>

	* tools/sane-desc.el: In backend web page, packends not included
	in the distribution have the version number in parentheses.

2000-02-20  Karl Heinz Kremer <khk@khk.net

	* backend/epson.c: Added some OS/2 compatibility fixes.

2000-02-20  Petter Reinholdtsen <pere@td.org.uit.no>

	* sanei/sanei_scsi.c: Make sure the file is valid ANSI C.

	* configure: Regenerated based on current configure.in.

	* include/sane/sanei_backend.h: Typedef u_int{8,16,32}_t.
	Defining them gave bogus code in <sys/types.h> on Irix 6.5.

	* backend/lhii.desc backend/musteka4s2.desc backend/nec.desc
	backend/plustek.desc backend/sagitta.desc backend/st400.desc
	backend/v4l.desc backend/v4l2.desc: Added info on existing
	backends.  Placed version number in () to indicate that these
	backend are distributed separately.

	* backend/sharp.desc backend/pint.desc backend/canon.desc
	backend/s9036.desc: Fixed typo and updated with more information.

	* AUTHORS: Marked active maintainers with '(*)'.

	* sanei/sanei_pio.c: Removed some warnings.

	* configure.in: New flag --enable-warnings to turn on or off more
	GCC warnings.  Default should be 'on' for development snapshots,
	and 'off' for releases.

2000-02-19  Karl Heinz Kremer <khk@khk.net>

	* backend/epson.*: Updated desc file with new version number and 
	  some more supported scanners.
	  Removed OPT_PREVIEW_RESOLUTION so that the frontend can handle
	  the preview resolution.
	  Changed the OPT_RESOLUTION data from a range to a word list, so
	  that the frontends can display the correct list of available
	  resolutions.

2000-02-19  Chris Pinkham <cpinkham@infi.net>

	* backend/artec.c: Updated backend version to v0.5.13.  Corrected
	matrix of which features/enhancements should be active for each
	scan mode.  Fixed bug which causing Contrast to be INactive at
	startup instead of Threshold.
	* backend/artec.desc: updated backend version information.

2000-02-19  Petter Reinholdtsen <pere@td.org.uit.no>

	* sanei/sanei_thread.c include/sane/sanei_thread.h: These files
	declares a _proposed_ internal SANE interface.  It was proposed by
	Yuri Dario to wrap UNIX functions fork(), kill(), waitpid() and
	wait(), which are missing or not working on OS/2.

	* frontend/saned.c: OS/2 send socket on param list. Patch from
	Yuri Dario.

	* sanei/os2_srb.h sanei/sanei_scsi.c: Include OS/2 SCSI header file.

	* include/sane/sanei_config.h sanei/sanei_config.c: New function
	sanei_config_read().  Use this instead of fgets() when reading
	config files to remove line ending chars on all known platforms.
	Patch from Yuri Dario.

	* configure.os2: Updated configure param list from Yuri Dario.

2000-02-19  Oliver Rauch <Oliver.Rauch@Wolfsburg.DE>
	* updated umax backend to version 1.0 build 18
	  for details read backend/umax.CHANGES

2000-02-19  Oliver Rauch <Oliver.Rauch@Wolfsburg.DE>
	* corrected spelling error in umax,c (devive -> device)

2000-02-18  Abel Deuring <a.deuring@satzbau-gmbh.de>
	* sharp.c / sharp.h: Options for resolution now conform to
	the Sane API; fixed and initialisation bug. Updated backend 
	version number in sharp.desc.	

2000-02-18  Oliver Rauch <Oliver.Rauch@Wolfsburg.DE>
	* updated umax backend to 1.0 build 17
	  (added support for sanei_scsi_open_extended)
	  for details take a look at backend/umax.CHANGES

2000-02-15  Petter Reinholdtsen <pere@td.org.uit.no>

	* backend/tamarack.desc: Updated info on request from Rogier
	Wolff.

2000-02-14  Petter Reinholdtsen <pere@td.org.uit.no>

	* backend/m3096g-scsi.h backend/sp15c-scsi.h: Make lint_catcher
	static to avoid link problems with duplicate symbols.
	
2000-02-13  Petter Reinholdtsen <pere@td.org.uit.no>

	* README.unixware2: Information from Wolfgang Rapp on how to build
	SANE on UnixWare 2.

	* ltconfig ltmain.sh: Upgraded to libtool 1.3.4 and added Oliver
	Rauch's soname patch.
	
	* backend/hp-accessor.c backend/hp-device.c backend/hp-handle.c
	backend/hp-hpmem.c backend/hp-option.c backend/hp-option.h
	backend/hp-scl.c backend/hp-scsi.h backend/hp.c backend/hp.desc
	backend/hp.h doc/sane-hp.man: Updated HP backend to v0.86 from
	Peter Kirchgessner.  Enable scan depths > 8 and add option
	enable-image-buffering to config file.

	* AUTHORS: Added author for backend s9036.
	* backend/qcam.desc: Updated with more information.

2000-02-11  Chris Pinkham <cpinkham@infi.net>

	* backend/artec.c backend/artec.h: Updated backend to version 0.5.11.
	  Removed mono_adjust function which handled bit offset in 1bpp modes,
	  this is now handled by forcing all scans to be wide enough to fill a
	  full byte.  Reinserted code to set brightness on A6000C model as this
	  appears to be the only model that accepts that setting.  Bug-fixes
	  for ADF & Transparency option settings.
	* backend/artec.desc: updated backend version information.

2000-02-11  Karl Heinz Kremer <khk@khk.net>
	* backend/epson.c - Fixed default scan source when option equipment 
	  is installed.  The default is now always "Flatbed". 

2000-02-08  Oliver Rauch <Oliver.Rauch@Wolfsburg.DE>

	* Added (again) missing file: doc/sane-logo2.jpg

2000-02-08  Oliver Rauch <Oliver.Rauch@Wolfsburg.DE>

	* Added missing umax doc files:
	  - doc/sane-umax-old-scanners-doc.html
	  - doc/sane-umax-not-listed-doc.html
	  - doc/sane-umax-speed-doc.html
        * Updated:
	  - doc/sane-umax-doc.html
	  - doc/sane-umax-scanners-doc.html

2000-02-08  Matto Marjanovic  <maddog@mir.com>

	* backend/microtek.c backend/microtek.h backend/microtek.conf
	backend/microtek.desc doc/sane-microtek.man:  Updated microtek
	backend to v0.12.0.  Changes:
	- LUT entry size should match bit depth of scan.
	- Free LUT's in sane_close().
	- Fixed really dumb type typos in microtek.h.
        - Added all "mystery" model codes (and an auto-warning).
        - Added all additional document size codes.
        - Made function (description) of "scan speed" more obvious.
        - Added entries for Color PageWiz.
        - Added entries for Agfa DuoScan.
        - A few miscellaneous cleanups to quiet gcc warnings.

2000-02-07  Petter Reinholdtsen <pere@td.org.uit.no>

	* frontend/saned.c sanei/sanei_pio.c sanei/sanei_scsi.c: Some OS/2
	patches from Yuri Dario.

	* frontend/scanimage.c: Avoid sprintf("%s", NULL). Bugreport and
	fix from Yuri Dario.

2000-02-06  Petter Reinholdtsen <pere@td.org.uit.no>

	* configure: Regenerated based on current configure.in.

	doc/Makefile.in doc/sane-logo.gif doc/sane-logo.png doc/sane.gif
	doc/sane.png: Convert .gif to .png.

	* backend/canon.c backend/snapscan-sources.c: Port to HP/UX.  Stop
	using GCC specific features.

2000-02-05  Rene Rebe <rene.rebe@myokay.net>
	* backedn/avision.? only minor updates and the new home-page
	  url ...
	
2000-02-05  Abel Deuring <a.deuring@satzbau-gmbh.de>
	* fixed wrong buffer size handling for old Linux SG drivers
	  in sanei_scsi.c
	* updated sane-scsi.man: How to change the buffer size,
	  if the new Linux SG driver is being used.
	* fixed a type on sharp.c

2000-02-03  Karl Heinz Kremer <khk@khk.net>
	* backend/epson.[ch] Reworked the gamma correction stuff

2000-02-02  Karl Heinz Kremer <khk@khk.net>
	* backend/epson.[ch] Finally put the USB fix into the CVS
	  version. Removed version number from epson.h so that this
	  file does not need to be updated everytime epson.c changes.

2000-02-01  Karl Heinz Kremer <khk@khk.net>
	* backend/epson.[ch] More changes in the attach function to
	  recognize USB scanners again.
	* doc/sane-epson.man More updates to the man page. 

2000-01-29  Oliver Rauch <Oliver.Rauch@Wolfsburg.DE>

	* updated umax backend to version 1.0-build-16
	  for details take a look at backend/umax.CHANGES

2000-01-31  Petter Reinholdtsen <pere@td.org.uit.no>

	* backend/hp-accessor.c backend/hp-accessor.h backend/hp-device.c
	backend/hp-device.h backend/hp-handle.c backend/hp-hpmem.c
	backend/hp-option.c backend/hp-option.h backend/hp-scl.c
	backend/hp-scl.h backend/hp-scsi.h backend/hp.TODO backend/hp.c
	backend/hp.desc doc/sane-hp.man: Updated to v0.85 from Peter
	Kirchgessner.

2000-01-30  Chris Pinkham <cpinkham@infi.net>

	* backend/artec.c backend/artec.h: (v0.5.9) changes to get lineart
	  and halftone modes working on AT12 and AM12S models.  bugfixes to
	  eliminate hanging on some AT12 models.
	* backend/artec.desc: version and model status updates

2000-01-30  Oliver Rauch <Oliver.Rauch@Wolfsburg.DE>
	* corrected missing "/" in include/sane/config.h.in line 251

2000-01-30  Rene Rebe <rene.rebe@myokay.net>

	* backend/avision.c fixed to compile on HP/UX
	* backend/avision.desc fixed typo
	* AUTHORS changed my eMail address
	
2000-01-30  Petter Reinholdtsen <pere@td.org.uit.no>

	* backend/dll.c backend/dll.aliases doc/sane-dll.man: Aliased and
	hidden backend patch from Ingo Wilken.

	* config.sub configure.in include/sane/config.h.in sanei/sanei_scsi.c:
	UnixWare 2.x and UnixWare 7 port by Wolfgang Rapp.

2000-01-29 Karl Heinz Kremer <khk@Kk.net>

	* backend/epson.[ch] Moved gamma "stuff" from advanced to standard
	  options section to fix core dump in xscanimage
	  Removed pragma pack() to make it easier to compile on non-gcc
	  systems

2000-01-29  Oliver Rauch <Oliver.Rauch@Wolfsburg.DE>

	* preview (xscanimage): added GDK_INPUT_EXCEPTION to gdk_input_add
	* updated umax-backend to build 15 (for more see umax.CHANGES
	* xscanimage: added GDK_INPUT_EXCEPTION to gdk_input_add

2000-01-26  Karl Heinz Kremer <khk@khk.net>

	* backend/epson.[ch] Bugfix for resolution selection via menu
	  Fixed coredump when no scanner found
	  merged Christian Bucher's newest version

	* AUTHORS ChangeLog

2000-01-26  Petter Reinholdtsen <pere@td.org.uit.no>

	* backend/m3096g-scsi.h backend/m3096g.c backend/m3096g.desc
	backend/m3096g.h backend/sp15c-scsi.h backend/sp15c.c
	backend/sp15c.desc backend/sp15c.h: Updated backends sp15c
	(v1.12) and m3096g (v1.11) from Randolph Bentson.

2000-01-25  Chris Pinkham <cpinkham@infi.net>

	* backend/artec.h backend/artec.c backend/artec.desc
	  installed new version (0.5.6) of artec backend with support
	  for Artec AM12S and Plustek 19200S models and numerous bugfixes.
	* doc/sane-artec.man
	  updated manpage to reflect new list of supported models and
	  backend status.


2000-01-25  Abel Deuring <a.deuring@satzbau-gmbh.de>

	* frontend/scanimage.c: minor modifications to the new batch mode
	  If an error occurs in batch mode, the corresponding output file
	  is now deleted. (Should make post-processing easier, because
	  otherwise we would have an empty output file every time the
	  ADF is empty or paper is jammed.)

2000-01-25  Kazuya Fukuda <fukuda@avm.nhe.nec.co.jp> and
            Abel Deuring <a.deuring@satzbau-gmbh.de>
	* backend/sharp.c: Fix of possible segfault in sane_init
	* backend/sharp.conf: contains now a complete sample configuration

2000-01-25  Petter Reinholdtsen <pere@td.org.uit.no>

	* frontend/scanimage.c: Return SANE_STATUS_NO_MEM if advance()
	failes.  Add return value to test_it().

	* include/sane/sanei_debug.h: Add fflush() after fprintf() in
	DBG macro.
	
	* AUTHORS backend/Makefile.in backend/m3096g.h backend/m3096g.c
	backend/m3096g-scsi.h backend/m3096g.desc backend/m3096g.conf
	backend/sp15c.h backend/sp15c.c backend/sp15c-scsi.h
	backend/sp15c.conf backend/sp15c.desc backend/dll.conf
	doc/Makefile.in doc/sane-fujitsu.man: Added backends sp15c (v1.11)
	and m3096g (v1.10).

	All patches from Randolph Bentson.

2000-01-24  Abel Deuring <a.deuring@satzbau-gmbh.de>

	* backend/sharp.c, backend/sharp.h: update to version 0.30 
	(sorry, forgot to make this note some days earlier)

2000-01-24  Oliver Rauch <Oliver.Rauch@Wolfsburg.DE>

	* Added test for libcam to configure.in
	  it is needed by FreeBSD 3+

2000-01-21  Rene Rebe: <rene.rebe@okay.net>

	* ChangeLog: updated (oversaw last time, sorry)
	* backend/avision.c: fixed some compiling warnings
	
2000-01-21  Petter Reinholdtsen <pere@td.org.uit.no>

        * sanei/sanei_scsi.c: Bugfix: Added return type for dummy
	sanei_scsi_open_extended() call.  Bugreport for Solaris from
	Martin Spott.

2000-01-20  Petter Reinholdtsen <pere@td.org.uit.no>

	* sanei/sanei_ab306.c: Removed compiler warnings.

	* frontend/scanimage.c: Adds a "batch mode" to the software, that
	can be used in conjunction with an ADF device, so that one can
	e.g. scan a complete document consting of multiple pages with just
	one call to scanimage.  This modification was created by Christian
	Bucher so that his Epson scanner could use the ADF.  Patch from
	Karl Heinz Kremer.

2000-01-19  Rene Rebe <rene.rebe@okay.net>

	* backend/avision.*: added - the (very) basic avision backend
	* backend/Makefile.in: updated for the avision backend
	* AUTHORS: updated

2000-01-18  Karl Heinz Kremer <khk@khk.net>
	* fixed typo in epson.desc and fixed the dates for
	  two of my earlier submissions in ChangeLog file

2000-01-16  Karl Heinz Kremer <khk@khk.net>

	* backend/epson.desc updated with URL
        * backend/epson.c added support for Expression family
	  of scanners
	* doc/sane-epson.man updated

2000-01-10  Karl Heinz Kremer <khk@khk.net>

	* backend/epson.desc fixed/updated. Now shows a link to
	  the alternative FilmScan 200 backend.

2000-01-09  Karl Heinz Kremer <khk@khk.net>

	* backend/epson.* updated. This is a new backend still based 
	  on the origial Sane 1.0.1 version, but with lots of work 
	  done: Support for ADF/TPU, more function levels (up to B9 
	  and initial work for F5), parallel scanner support and initial 
	  support for USB scanners (don't use this yet, it still needs
	  a lot of work to be functional and usable).

2000-01-05  Oliver Rauch <Oliver.Rauch@Wolfsburg.DE>

	* backend/umax* updated to backend version 1.0 build 14
          for detailled info take a look at umax.CHANGES

2000-01-05  Petter Reinholdtsen <pere@td.org.uit.no>

	* sanei/sanei_scsi.c include/sane/sanei_scsi.h configure.in
	linux_sg3_err.h: Updated Linux SCSI Generic (SG) driver as
	follows:
	     - new handling of sanei_scsi_max_request_size, if an SG
	       driver >= 2 is installed;
	     - SCSI command queueing on SG level for SG drivers >= 2.1.35;
	     - usage of the new interface in SG version 3, if available
	     - new configure option --enable-scsibuffersize=N
	Patch from Abel Deuring <a.deuring@satzbau-gmbh.de>.

2000-01-02  Petter Reinholdtsen <pere@td.org.uit.no>

	* configure.in tools/Makefile.in tools/sane-config.in: New script
	sane-config to help frontend developers find the sane libraries.

1999-12-29  Petter Reinholdtsen <pere@td.org.uit.no>

	* configure.in: Add gcc options '-W -Wall -Wpointer-arith
	-Wcast-qual' to at least get warnings on illegal C code which
	would fail to compile on HP/UX native compiler.

1999-12-20  Petter Reinholdtsen <pere@td.org.uit.no>

	* include/sane/config.h.in backend/dc25.desc backend/dc25.c:
	Updated DC-25 backend to v1.2 from Peter Fales
	<psfales@lucent.com>.
	- Updated dc25.desc
	- Retry capability for missing data or bad checksums in the data
	  from the camera. This has resulted in a dramatic reduction in
	  download failures.
	- Include HAVE_CFMAKERAW in config.h.in and dc25.c.

	* backend/dc210.c: Corrected HAVE_cfmakeraw to HAVE_CFMAKERAW.

	* frontend/xscanimage.c: Change GIMP_EXTENSION to
	SANE_GIMP_EXTENSION to avoid name conflict with gimp.  Patch from
	Stanislav Brabec <utx@k332.feld.cvut.cz>.

1999-12-12  Petter Reinholdtsen <pere@td.org.uit.no>

	* backend/ricoh.h backend/ricoh.c: Add support for Ricoh IS50
	scanner.  Limit IS50 resolution to 400 dpi.  Reverse IS50 contrast
	direction.  Patch from Dick Streefland
	<Dick.Streefland@inter.NL.net>.

	* backend/microtek.c backend/microtek.h backend/microtek.conf
	backend/microtek.desc doc/sane-microtek.man: Updated Microtek
	backend to v0.11.0 from Matthew Marjanovic <maddog@mir.com>.

	* backend/microtek2.c backend/microtek2.h: Updated Microtek2
	backend to v0.8 from Bernd Schroeder <bernd@aquila.muc.de>.

1999-11-20  Oliver Rauch <Oliver.Rauch@Wolfsburg.DE>

	* ltmain.sh:
        changed variable soname from "libsane-backendname.*"
        to "libsane.*" by sed command.
        * ltmain.sh:
        changed again the sed command, forgot to remove "0-9"

1999-11-14  Petter Reinholdtsen <pere@td.org.uit.no>

	* backend/artec.c backend/artec.h backend/artec.desc
	doc/sane-artec.5 doc/Makefile.in: Updated Artec backend to v0.5
	from Chris Pinkham <cpinkham@infi.net>.

1999-11-11  Petter Reinholdtsen <pere@td.org.uit.no>

	* backend/microtek2.c backend/microtek2.h backend/microtek2.desc:
	Updated Microtek2 backend to vpre0.8.161099 from Bernd Schroeder
	<bernd@aquila.muc.de>

	* backend/canon-* NEWS doc/canon.*: Updated Canon backend to
	v991108 from Manuel Panea <mpd@rzg.mpg.de>.

1999-09-14  Oliver Rauch <Oliver.Rauch@Wolfsburg.DE>

	* removed sane-umax-*.gif and umaxlogo.gif,
	  the files were replaced by jpg format.

1999-09-13  Oliver Rauch <Oliver.Rauch@Wolfsburg.DE>

	* backend/umax* and doc/sane-umax* updated to version 1.0-build-12
          for detailled info take a look at umax.CHANGES

1999-09-12  Petter Reinholdtsen <pere@td.org.uit.no>

	* include/sane/config.h.in: Add missing HAVE_SYS_SOCKET_H.

	* backend/hp-handle.c backend/hp-option.c backend/hp-option.h
 	backend/hp-scl.c backend/hp-scl.h backend/hp-scsi.h backend/hp.c
 	backend/hp.desc backend/hp.h doc/sane-hp.man: Updated backend to
 	v0.83 from Peter Kirchgessner <peter@kirchgessner.net>.  News:
	 - Reset scanner before downloading parameters (fixes problem with
 	   sleep mode of scanner)
         - Fix problem with coredump if non-scanner HP SCSI devices are
 	   connected (CDR)
         - Option scan-from-adf replaced by scantype
 	   normal/adf/xpa. Transparency adapter scans (XPA) allow scanning
 	   with internal light source switched off.
         - PhotoScanner: Allow scanning of slides/negatives only at
 	   multiple of 300 dpi. This fixes problem with preview which
 	   scanned at arbitrary resolutions.
	 - (by Marian Szebenyi): close pipe (coredump on Digital UNIX) 
	
 	* backend/Makefile.in: Correct install target to also work on
 	platforms where dll endings isn't .so (like HP/UX).  Extract
 	endings from libsane-dll.la.

1999-09-07  Petter Reinholdtsen <pere@td.org.uit.no>

	* tools/find-scanner.c: Checks (Linux only so far) for SCSI
 	Generic support in the OS kernel. If NOT present it tells the user
 	they may need SG drivers.  Patch from Nick Lamb
 	<njl98r@ecs.soton.ac.uk>.
	
	* sanei/sanei_scsi.c [sanei_scsi_cmd sanei_scsi_open]: Digital
 	UNIX 4.0D patches from Marian Szebenyi <dms35@cornell.edu>.

1999-08-16  Petter Reinholdtsen <pere@td.org.uit.no>

	* configure.in: Turn on more gcc warnings.

	* acinclude.m4 configure.in: Separate GTK_LIBS into LIBS and
 	LDFLAGS to get the X programs to link on HP/UX.
	
1999-08-12  Petter Reinholdtsen <pere@td.org.uit.no>

	* aclocal.m4 configure.in configure: Generate configure and
 	aclocal.m4 with autoconf 2.13.  Adding AC_PROG_LD, trying to get
 	this compiling on CygWin32.  Add AM_PROG_CC_STDC to get it to
 	compile out of the box on HP/UX.

	* lib/dll.c: Use calloc() instead of malloc() and memset().  Use
	dlerror() instead of strerror() when dlopen fails
 	(bugfix from Ingo Wilkens).

1999-08-11  Petter Reinholdtsen <pere@td.org.uit.no>

	* config.guess config.sub: Updated to latest versions from FSF.
  	Better support for BeOS, WinNT and others.
	
1999-08-09  Petter Reinholdtsen <pere@td.org.uit.no>

	* Started CVS branch DEVEL_1_9.

	* install-sh ltconfig ltmain.sh mkinstalldirs: Updated from
	automake 1.4 and libtool 1.3.3.

1999-04-19  David Mosberger-Tang  <David.Mosberger@acm.org>

	* Version 1.0.1 released.

	* backend/artec.c (attach): Applied patch by Petter to fix URL in
	debug output.

	* backend/microtek2.c (chunky_proc_data): Apply Bernd's latest
	patch to fix some color problems.

1999-04-17  David Mosberger-Tang  <David.Mosberger@acm.org>

	* Patch by Mikko Ty<54>l<EFBFBD>j<EFBFBD>rvi:
	* sanei/sanei_scsi.c: Check for cam_devices[fd]==NULL, not !=NULL.

	* Patch from Petter:
	* config.guess: Update to latest version.
	* config.sub: Update to latest version.
	* config.install-sh: Update to latest version.
	* mkinstalldirs: Update to latest version.

1999-04-12  David Mosberger-Tang  <David.Mosberger@acm.org>

	* doc/sane-dc25.man: Apply fixes by Peter Fales
	<psfales@lucent.com>.
	* backend/dc25.c: Apply patch by Peter Fales.

1999-04-11  David Mosberger-Tang  <David.Mosberger@acm.org>

	* include/sane/config.h.in: Declare return type of strdup(),
	strndup(), and strsep() if these functions are not part of the
	standard libc.  This breaks the GNU convention of not declaring
	standard C library functions but is required in these cases
	because the functions return pointers.  On a 64 bit platform, bad
	code is generated if a function is (implicitly) declared to return
	an "int" and then returns a pointer.  To minimize the risk of
	compile errors due to conflicting prototypes, we don't specify a
	prototype though (just the return type).

	* backend/dll.conf: Comment out dc25 and dc210 backends as those
	are VERY slow to initialize when no camera is attached.

	* backend/epson.desc: Add Epson GT-7000.

1999-04-06  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/sharp.c (sane_read_shuffled): Declare as "static".
	(sane_read_direct): Ditto.
	Applied latest patch by Kazuya and Abel.

	* sanei/sanei_scsi.c [USE == FREEBSD_CAM_INTERFACE]: Fix bugs
	(patch by Mikko Tyo"la"ja"rvi <mikko@securitydynamics.com>).

	* backend/snapscan.c (start_reader): Don't redirect scanner file
	descriptor to fd 0 (needlessly breaks FreeBSD and other platforms
	that don't use real file descriptors for the scanner.

	* backend/microtek2.c: Apply Bernd's patch to fix "green-ness"
	bug.

	* backend/umax.BUGS: Applied Oliver's latest patch.
	* backend/umax.CHANGES: Ditto.
	* backend/umax.FAQ: Ditto.
	* backend/umax.TODO: Ditto.
	* backend/umax.c: Ditto.
	* backend/umax.desc: Ditto.
	* doc/sane-umax-doc.html: Ditto.
	* doc/sane-umax-doc.tex: Ditto.
	* doc/sane-umax-doc.man: Ditto.
	
1999-04-06  Petter Reinholdtsen <pere@td.org.uit.no>

	* backend/snapscan.c (sane_exit sane_get_devices): Removed memory
	leak.
	(sane_open): Give more sensible error message when unable to open
	temp file.  Open temp file in /var/tmp, not in current directory.
	(mini_inquiry add_device): Make sure to only match listed models.
  	Earlier, substrings would also match.

	* backend/snapscan.c (sane_snapscan_*): Changed API entries from
	sane_snapscan_* to sane_*.

	* backend/snapscan.c (add_device init_options inquiry
 	sane_snapscan_get_parameters sane_snapscan_start
 	sane_snapscan_set_io_mode sane_snapscan_read) backend/snapscan.h
 	backend/snapscan.desc: Rewrote scanner detection code to loop over
 	array of supported SCSI names.  Added AGFA SnapScan 1236s support.
  	It seems to be compatible with SnapScan 600.
	Make sure to not add the same device more then once to the device
 	list.  Bugfix in sane_snapscan_read() triggered on EOF.

1999-04-04  David Mosberger-Tang  <David.Mosberger@acm.org>
	* PROBLEMS: Note that /proc/sys/kernel/sg-big-buff is available
	since Linux kernel v2.2.

	* backend/agfafocus.desc: Changed status from "new" to "alpha".
	* backend/hp.desc: Ditto.

	* backend/microtek2.desc: Increase version number to 0.6.

1999-04-04  Petter Reinholdtsen <pere@td.org.uit.no>
	* PROBLEMS:  Updated note on SG_BIG_BUF.
	* tools/README: Corrected typo.  Added some notes on
	mustek600iin-off.
	* tools/mustek600iin-off.c: Remove hardcoded path to mustek.conf.

1999-04-03  David Mosberger-Tang  <David.Mosberger@acm.org>

	* include/sane/sanei_debug.h: Define sanei_debug_BACKEND_NAME only
	if STUBS is not defined.

	* backend/microtek2.h: #ifdef out do_dummy_scan.

	* backend/Makefile.in (V_REV): New variable.

	* configure.in (V_REV): New variable.
	(VERSION): Include ${V_REV} in vesion number.
	Substitute V_REV.
	
	* backend/umax.c (umax_do_request_sense): Make "static".

	* backend/canon.h: Move array "option_name"...
	* backend/canon-sane.c: ...to here and make "static".

	* backend/pnm.c: Rolled back to version that shipped with
	sane-0.74.  The scan area options were not well implemented.  If
	someone wants to fix that code, the previous (unreliable) version
	of the PNM backend is in backend/pnm.c-bad.

	* doc/sane.tex (subsection{Resolution Option}: Remove section
	4.5.5---it was a duplicate of section 4.5.2 (Scan Resolution
	Option)!

	* backend/microtek2.c (chunky_proc_data): Merge in latest changes
	from Bernd.

1999-04-02  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/net.c (sane_control_option): Ignore the option size
	of BUTTONs and GROUPs as required by section 4.2.9.  (Bug
	reported by Nick Lamb).

	* frontend/xscanimage.c (null_print_func): Declare MSG param
	as "const" to match declaration of glib-1.2.1.

	* backend/ricoh.c (attach_one): return SANE_STATUS_GOOD.

	* backend/microtek2.c (do_dummy_scan): #ifdef out since it
	seems to be used for debugging only.

	* backend/hp-option.c (_probe_int): Needed only if HP_EXPERIMENTAL
	is defined.

	* backend/coolscan.c: Updated with Didier's latest patch.

	* backend/mustek.c: Applied Andreas's latest patch.

	* doc/sane.tex (subsection{Device Descriptor Type}): Add AGFA.

	* doc/net.tex (subsection{Primitive Data Types}): Clarify that
	SANE_Char is encoded as ISO LATIN-1 and describe SANE_String
	encoding (patch by Petter).

	* frontend/saned.c (DBG): Remove extraneous parens around "msg".

	* AUTHORS (Frontends): Update David Skoll's email address.

	* frontend/saned.c (get_free_handle): Check for out of memory
	situations and initialize newly allocated memory.
	(auth_callback): Fail when we can _not_ authorize (i.e.,
	!can_authorize), not the other way round.
	(quit): Make sure quit() gets executed only once.

	* backend/microtek2.c: Updated with Bernd's latest version.
	* backend/microtek2.h: Ditto.

	* backend/st400.desc: New file.

	* backend/epson.c (sane_open): Check for NULL or empty
	dummy_dev.sane.name to avoid segfaults.  (Suggested by Yuri
	Dario).

	* sanei/sanei_scsi.c [USE = LINUX_INTERFACE]: Make "cdb" last
	member in "struct req" and change size of "data" to 1 byte to
	allow dynamic sizing of data buffer based on the value of
	sanei_scsi_max_request_size.
	(sanei_scsi_req_enter): Calculate size of request based on
	sanei_scsi_max_request_size.  A similar patch was proposed
	by Petter Reinholdtsen.

1999-03-13  Petter Reinholdtsen  <pere@td.org.uit.no>

	* doc/saned.man: More info on how to use tcp_wrapper for access
	control.

1999-03-08  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/microtek2.c (sane_get_select_fd): Remove bogus cast.
	Reported by Petter Reinholdtsen.

	* sanei/sanei_config.c: Include <sane/config.h>.

	* frontend/saned.c: Include <sys/types.h>.
	(MAXHOSTNAMELEN): Define MAXHOSTNAMELEN if necessary.

	* configure.os2 (LN_S): Updated with Yuri's latest version.

	* backend/Makefile.in (install): Use $(LN_S) instead of ln -s.
	(libsane-dll.la): Make dependent on $(DLL_PRELOAD_EXTRAS).
	(libsane-hp.la): Make dependent on sanei_pio.lo.

	* backend/hp.c (PATH_MAX): Define PATH_MAX if necessary.

	* backend/hp-scl.c (sanei_hp_scsi_pipeout): Add SIGXCPU, SIGXFSZ,
	and SIGVTALRM only if defined.

	* backend/dc25.c (PATH_MAX): Define PATH_MAX if necessary.
	(sane_init): Move up fclose(fp) to avoid segfault when fp==NULL.
	* backend/dc210.c (sane_init): Ditto.

	* backend/pnm.c: Apply Oliver's 4-liner to make TLX, TLY, BRX, and
	BRY advanced options.

	* backend/umax.c: Updated with Oliver's latest version.
	
	* doc/sane-sharp.man: New file (by Kazuya Fukuda).
	* backend/sharp.c: Updated with Kazuya's latest version.
	* backend/sharp.h: Ditto.
	* backend/sharp.desc: Ditto.

1999-03-04  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/canon.c (adjust_hilo_points): Print values of type
	size_t as described in backend/GUIDE..

	* backend/canon-scsi.c: Comment out unused code.

	* backend/canon.c: Updated with Manuel Panea latest version.

	* Irix patches from Michael Sweet:

	* sanei/sanei_scsi.c (sanei_scsi_find_devices): Update with
	Michael's latest version.
	* configure.in (CPPFLAGS): Don't check for libnsl or libsocket on
	Irix.
	(CPPFLAGS): Check for cfmakeraw.
	* backend/sharp.h (mode_select_param): Remove double semicolon
	(some compiler's don't grok those in structure declarations).
	* backend/Makefile.in (libsane-abaton.la): Make dependent on
	sanei_config2.lo.
	* backend/dll.conf: Enable net backend, disable pnm backend by
	default to lessen risk of confusing novice users.
	* backend/abaton.c (sane_read): Change type of "size" from ssize_t
	to size_t.
	* backend/apple.c (sane_read): Ditto.

1999-03-02  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/Makefile.in (EXTRA_dc210): New macro.

	* sanei/sanei_ab306.c: Apply usleep() patch by Andreas
	Czechanowski.

	* backend/hp.c: Updated with Peter's latest version (v.082).

1999-03-01  David Mosberger-Tang  <David.Mosberger@acm.org>

	* include/sane/sanei_net.h: Changed copyright on this file (and
	this file only!) to be public domain (same as sane.h).  This helps
	ensuring that independent network implementations remain
	compatible.

1999-02-28  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/sharp.c: New file by FUKUDA Kazuya
	<fukuda@avm.nhe.nec.co.jp>.
	* backend/sharp.h: Ditto
	* backend/sharp.conf: Ditto.
	* backend/sharp.desc: Ditto.

	* include/sane/sanei_debug.h: Define sanei_debug_BACKEND_NAME
	only if BACKEND_NAME is defined.

	* tools/find-scanner.c (main): Add NetBSD device names (patch by
	Taniguchi Shinya <Taniguchi.Shinya@exc.epson.co.jp>).

	* backend/epson.c (attach): Recognize Perfection636 scanner.
	Suggested by Svend Daugaard Pedersen <sdp@vip.cybercity.dk>.

	* backend/abaton.c (attach_one): Move past attach() to avoid
	forward-reference.

	* backend/umax.c (umax_do_request_sense): Make static.

	* backend/snapscan-310.c (rgb_buf_can_get_line): Make static.
	(rgb_buf_init): Ditto.
	(rgb_buf_clean): Ditto.
	(rgb_buf_push_line): Ditto.
	(rgb_buf_get_line): Ditto.
	(rgb_buf_set_diff): Ditto.
	(transfer_data_diff): Ditto.

	* backend/snapscan.c (gamma_8): Make static.
	(start_reader): Ditto.
	
	* backend/microtek.c (do_precalibrate): Make static.
	(finagle_precal): Ditto.
	(pack_flat_data): Ditto.
	(pack_goofyrgb_data): Ditto.
	(pack_into_ring): Ditto.
	(pack_into_dest): Ditto.
	(pack_seqrgb_data): Ditto.
	(ring_alloc): Ditto.
	(ring_expand): Ditto.
	(ring_free): Ditto.
	(set_pass_parameters): Ditto.

	* backend/epson.c (epson_cmd): Make static.

	* backend/dc25.c (pp): Make static.
	(tmpname): Ditto.
	(tmpnamebuf): Ditto.
	(tty_baud): Ditto.

	* backend/artec.c (artec_get_status): Make static.
	(attach_one): Ditto.
	(cap_data): Ditto.

	* backend/abaton.c (mode_update): Make mode_update() static.
	* backend/apple.c (mode_update): Ditto.
	(gamma_update): Make static.
	(xquant): Ditto.
	(yquant): Ditto.

	* backend/microtek2.c: Updated with Bernd's v0.6.
	Add missing include of <errno.h>.

	* backend/microtek2.h: Ditto.
	* backend/microtek2.conf: Ditto.

1999-02-27  David Mosberger-Tang  <David.Mosberger@acm.org>

	* frontend/preview.c (preview_scan): Fix dpi calculation by
	replacing gwidth by gheight.  Reported by Manuel Panea.

	* doc/sane-net.man: Change service name from "saned" to "sane".

	* sanei/sanei_scsi.c (MAX_DATA) [FREEDBSD_CAM_INTERFACE]:  Change
	MAX_DATA from MAXPHYS to (DFLTPHYS - PAGE_SIZE).  Patch by
	Parag Patel <parag@cgt.com>.

	* AUTHORS (Backends): Updated Peter's email address.

	* PROJECTS: Updated Peter's home page URL.

	* backend/snapscan.c (EXPECTED_MAJOR): Update EXPECTED_MAJOR to 1.

	* include/sane/sane.h (SANE_CURRENT_MAJOR): SANE_CURRENT_MAJOR and
	V_MAJOR HAVE to be in sync, so I'm forced to fix SANE_CURRENT_MAJOR
	now.  Embarassing, but fortunately only the snapscan backend seems
	affected by this change.

	* backend/dll.c (load): Use SANE_CURRENT_MAJOR, not V_MAJOR (the
	latter is used for shared lib versioning).

	* tools/find-scanner.c (main): Make verbose output a bit
	friendlier (patch by Petter).

	* backend/umax.c: Updated with Oliver's latest version (v1.0c).

	* Patch by Mike Sweet: * backend/Makefile.in (libsane-ricoh.la):
	Make dependent on sanei_config2.lo.  * sanei/sanei_scsi.c
	(sanei_scsi_find_devices): New function.
	(WE_HAVE_FIND_DEVICES): Define.  * frontend/saned.c (check_host):
	A "+" in saned.conf now matches any remote host (may be a bit
	dangerous, so use this judiciously).  * frontend/gtkglue.c:
	Include <string.h>.  * backend/hp-accessor.c (hp_data_alloc):
	Round size up to a multiple of sizeof(long) to avoid alignment
	problems.  * backend/abaton.h: Remove extraneous comma in enums.
	* backend/artec.conf: Add "scsi ULTIMA" line.  *
	backend/abaton.conf: Add "scsi ABATON" line.  *
	backend/epson.conf: Add "scsi EPSON" line.  * backend/ricoh.conf:
	Add "scsi RICOH IS60" line.  * backend/snapscan.conf: Add "scsi
	AGFA" and "scsi COLOR" line.  * backend/tamarack.conf: Add "scsi
	TAMARACK" line.  * backend/abaton.c (sane_init): Fix fall back
	code to attach /dev/scanner when ABATON_CONFIG_FILE doesn't exist.
	(sane_init): Use sanei_config_attach_matching_devices().
	(attach_one): New function.
	* backend/hp-device.c (sanei_hp_device_probe): Mention model
	6250C.

	* backend/saned.conf: Remove the stale comments about hostname
	matching being case-sensitive.

	* backend/microtek.h: Updated with Matto's v0.10.1.

	* backend/mustek.c (send_gamma_se): Apply patch by Wilco Oelen
	<woelen@noord.bart.nl> to clip gamma values to range 0..255.

	* backend/artec.desc: Updated with Chris Pinkham's latest version.

	* backend/umax.c (PATH_MAX): Do conditional define of PATH_MAX
	_after_ including all the headers to avoid "duplicate define"
	warning message.

	* backend/ricoh.h: Include <sane/config.h> to get #define for
	"inline" if necessary.

	* backend/dc210.c (init_dc210): To send break, use tcsendbreak()
	if available or TCSBKRP or TCKSBRK ioctl() if available or fall
	back to doing nothing if none of these are supported.  This may
	cause the backend to work incorrectly on platforms that do not
	support one of the above methods for sending a break, but at least
	it will compile that way.

1998-12-12  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/hp.desc: Updated with Peter's latest version.

1998-11-30  David Mosberger-Tang  <David.Mosberger@acm.org>

	* LICENSE (terms): Add a pointer to backend/djpeg.README.gz.

	* backend/djpeg.README.gz: New file (required to comply with JPG
	licensing restriction).

	* backend/snapscan.c (sane_snapscan_start): Use INT_MAX instead
	of non-portable MAXINT.
	Don't include Linux-specific <values.h>.

1998-11-26  David Mosberger-Tang  <David.Mosberger@acm.org>

	* doc/sane.tex (subsection{Device Descriptor Type}): Consistently
	use "Noname" (instead of None/Noname) to indicate the absence of
	a vendor.
	(subsection{sane_strstatus}): Define how long the returned string
	is valid.
	(section{Code Flow}): Clarify that sane_cancel() has to be called
	even if read returns SANE_STATUS_EOF.

1998-11-22  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/ricoh.h (_4btol): Replace "__inline" by "inline".

	* backend/abaton.c (sane_control_option): Assign word values to
	s->val[foo].w not s->val[foo].  The latter compiles on gcc-2.7.2.3
	without warning but causes an error on other compilers (e.g.,
	egcs).
	
1998-11-21  David Mosberger-Tang  <David.Mosberger@acm.org>

	* Version 1.0 released

	* From Brian J. Murrell:
	
	* backend/dll.conf: Mention dc210.

	* backend/cderror.h: New file.
	* backend/jinclude.h: Ditto.
	* backend/djpeg.c: Ditto.
	* backend/dc210.desc: Ditto.
	* backend/dc210.h: Ditto.
	* backend/dc210.c: Ditto.
	* backend/cdjpeg.h: Ditto.

	* doc/Makefile.in (SECT5): Mention sane-abaton.5.
	* doc/sane-abaton.man: New file.
	* backend/abaton.c: Ditto.
	(wait_ready): Explicitly cost tv_sec member to (long) in order
	to print it (avoids warning on platforms where tv_sec is not a long).

	* backend/abaton.h: Ditto.
	* backend/abaton.conf: Ditto.
	* backend/abaton.desc: Ditto.
	* backend/dll.conf: Mention abaton.

	* Apollo/DomainOS fixes by Paul Walker:
	* sanei/sanei_DomainOS.h: Add this missing file.
	* sanei/sanei_config2.c: Include <sane/config.h> to get
	u_char defined if necessary.
	* sanei/sanei_DomainOS.c (upper_string): Delete.
	(do_help): Ditto.
	* include/sane/config.h.in: Add #undef HAVE_SYS_TIME_H.

	* lib/usleep.c [HAVE_SYS_TIME_H]: Include <sys/time.h> only if
	we have it.

	* configure.in (CPPFLAGS): Check for sys/time.h.

	* frontend/gtkglue.c: Move include of <sys/types.h> in front
	of include of <sys/stat.h>.

	* config.sub: Apply patch to recognize -sys5.3.

	* backend/microtek.c: Applied Matto's latest patch to upgrade
	backend from v0.9 to v0.10.

1998-11-04  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/microtek2.desc: Mention ScanMaker X6 and Phantom 636.

	* backend/microtek2.c (check_inquiry): Mention Phantom 636 in
	model string.

1998-11-03  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/microtek2.c (check_inquiry): Added patch by Sebastian
	Erdmann <serdmann@cs.tu-berlin.de> to recognize ScanMaker X6.

1998-11-02  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/artec.c: Print size_t as recommended in backend/GUIDE.

1998-11-02  Chris Pinkham <cpinkham@infi.net>

	* backend/artec.c: changes to correct bugs when using AT12.
	(sense_handler): New function (by Dick Bruijn).
	(wait_ready): Ditto (by Dick Bruijn).
	(abort_scan): Ditto (by Dick Bruijn).
	Support added to read capability data from scanner if the model.
	Supports this command (by Dick Bruijn).
	Added call to sanei_scsi_close() if detected scanner is not
	a Artec/Ultima model (by Francois Ouellet).
	Added Negative option.  Added Halftone Pattern option.
	Added Filter Type option for mono scans.
	Added Quality Calibration option.
	Moved test_unit_ready command till AFTER we check for ULTIMA scanner.

1998-11-02  David Mosberger-Tang  <David.Mosberger@acm.org>

	* config.guess: Upgrade to libtool v1.2.
	* config.sub: Ditto.
	* ltconfig: Ditto.
	* ltmain.sh: Ditto.

1998-10-29  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/mustek.c (encode_resolution): If MUSTEK_FLAG_DOUBLE_RES
	is set, use resultion encoding reported by
	<Heiko_Schroeder@t-online.de>
	(attach): Set MUSTEK_FLAG_DOUBLE_RES for MSF-06000CZ.  Do other
	models need this, too?
	(calibration): Declare NUM as size_t, not int.  #ifdef out this
	unused routine.
	(reader_process): Print size_t values as %lu with explicit cast
	to u_long.

	* backend/mustek.h (MUSTEK_FLAG_DOUBLE_RES): New flag.

	* backend/mustek.c (init_options): Initialize resolution with 18
	dpi, not 100dpi so that "scanimage" without options gives a
	preview-quality image that doesn't take much space or time.

	* backend/mustek.c: Updated with Andreas Bolsch's version (adds
	support for SE models).
	* backend/mustek.h: Ditto.
	* backend/mustek.spec: Ditto.

	* backend/pnm.c (sane_read): Replace C++ comment with C comment.

	* backend/microtek2.c: Updated with Bernd's v0.5.
	* backend/microtek2.h: Ditto.
	* backend/microtek2.conf: Ditto.

	* backend/umax.c: Updated with Oliver's latest version.
	* backend/umax.h: Ditto.
	* backend/umax-scsidef.h: Ditto.
	* backend/umax-scanner.h: Ditto.
	* backend/umax-uc630.h: Ditto.
	* backend/umax-uc840.h: Ditto.
	* backend/umax-ug630.h: Ditto.
	* backend/umax-ug80.h: Ditto.
	* backend/umax-uc1200s.h: Ditto.
	* backend/umax-uc1200se.h: Ditto.
	* backend/umax-uc1260.h: Ditto.
	* backend/umax.conf: Ditto.
	* include/sane/saneopts.h: Ditto.
	* doc/sane-umax-doc.html: Ditto.
	* doc/sane-umax-doc.tex: Ditto.
	* doc/sane-umax.man: Ditto.

1998-10-28  David Mosberger-Tang  <David.Mosberger@acm.org>

	* doc/sane.tex (subsection{sane_control_option}): Clarify that
	paramter "v" is ignored for SET_AUTO calls.

	* frontend/saned.c (init): Initialize w->version.

	* backend/net.c (connect_dev): Accept version code 2 and
	set peer's version code in dev->wire.version.

	* include/sane/sanei_wire.h: New member "version".

	* sanei/sanei_net.c (sanei_w_control_option_req): Encode
	option value only if peer_version is < 3 or if action is
	not SANE_ACTION_SET_AUTO.

	* include/sane/sanei_net.h (SANEI_NET_PROTOCOL_VERSION): Up
	protocol version to version 3.

	* sanei/sanei_net.c (sanei_w_control_option_req): Transcode
	value_type, value_size, and value only if req->action !=
	SANE_ACTION_SET_AUTO.  Reported by Petter Reinholdtsen.

	Patches by Petter Reinholdtsen <pere@hungry.com>:

	* backend/dmc.c (attach_one): Don't use C++-style comments.

	* backend/dc25.h (DEFAULT_TTY_BAUD): New macro.  Move SPEEDS macro
	to dc25.c.

	* backend/dc25.c: Initialize tty_baud to DEFAULT_TTY_BAUD.  Use
	B57600 and B115200 only if defined.

	* doc/saned.man: Mention that hostname matching no longer is case
	significant.

	* configure.in
	(lib/Makefile.in,lib/strcasecmp.c,frontend/saned.c): Use
	strcasecmp() instead of strcmp to compare DNS hostnames.  Case is
	irrelevant when using DNS.

	* backend/dll.c: Add support for HP-UX 10.xx style shared
	libs.

	* configure.in include/sane/config.h.in backends/dll.c:
	Use dhl_load() family for DLL support on HP/UX.

	* backend/snapscan.c (sane_snapscan_open): Don't cast lvalue
	(illegal according to ANSI C, I think).

	* backend/apple.c (init_options): Add explicit "break" after
	"default:" to make HP-UX compiler happy (?).
	(sane_read): Make stuff after #endif a comment.

	* backend/agfafocus.c: New file (by Karl Anders Oygard
	<karlo@opera.no>).
	* backend/agfafocus.h: Ditto.
	* doc/sane-agfafocus.man: Ditto.

	* doc/sane-net.man: Fix typo: network service is called "sane",
	not "saned" (by Andreas Dilger <adilger@enel.ucalgary.ca>).

	* backend/hp-scl.c (sanei_hp_scsi_pipeout): Use SIGPWR only if its
	defined (by Peter Kirchgessner).

	* frontend/Makefile.in (INCLUDES): Mention @GTK_CFLAGS@ as part of
	INCLUDES macro instead of CFLAGS.  Despite its name, @GTK_CFLAGS@
	is guaranteed to contain CPP include directives only.  (Reported
	by Kevin Dalley <kevind@rahul.net>.)

1998-10-27  David Mosberger-Tang  <David.Mosberger@acm.org>

	* sanei/sanei_scsi.c (sanei_scsi_open): Return
	SANE_STATUS_ACCESS_DENIED if open() fails with errno==EACCES.

	* backend/ricoh-scsi.c: #ifdef out unused code and print values of
	type size_t as prescribed in the file backend/GUIDE.

	* backend/dll.conf: Mention Ricoh backend.

	* backend/ricoh.c: New file (by Ricoh Dillema).
	* backend/ricoh.h: Ditto..
	* backend/ricoh-scsi.c: Ditto..

	* backend/microtek.c: Apply Aug 7 patch by Matto Marjanovic.

	* backend/dc25.c: Apply patch by Peter Fales (v1.1).
	* backend/dc25.desc: Ditto.
	* doc/sane-dc25.man: Ditto.

	* backend/pnm.c: Applied patch by Goran Thyni <goran@bildbasen.se>
	that allows scanning parts of a PNM image.

	* backend/GUIDE: Add Matto's comment on .desc files.

	* backend/hp.c: New file from Peter Kirch (formerly known as xhp).
	* backend/hp.h: Ditto.
	* backend/hp-accessor.h: Ditto.
	* backend/hp-device.h: Ditto.
	* backend/hp-handle.h: Ditto.
	* backend/hp-option.h: Ditto.
	* backend/hp-scl.h: Ditto.
	* backend/hp-scsi.h: Ditto.
	* backend/hp-accessor.c: Ditto.
	* backend/hp-device.c: Ditto.
	* backend/hp-handle.c: Ditto.
	* backend/hp-hpmem.c: Ditto.
	* backend/hp-option.c: Ditto.
	* backend/hp-scl.c: Ditto.
	* backend/Makefile.in (libsane-hp.la): Make libsane-hp.la
	dependent upon hp-accessor.lo, hp-device.lo, hp-handle.lo,
	hp-hpmem.lo, hp-option.lo, and hp-scl.lo.

1998-10-22  David Mosberger-Tang  <David.Mosberger@acm.org>

	* doc/sane-hp.man (Model): Mention HP6200 as per report by Tom
	Martone <tommartone@erols.com>.

1998-07-30  David Mosberger-Tang  <David.Mosberger@acm.org>

	* include/sane/config.h.in: Apply Cory Kempf's
	<ckempf@enigami.com> FreeBSD CAM support patch.
	* sanei/sanei_scsi.c: Ditto.
	* tools/find-scanner.c: Ditto.
	* configure.in: Ditto.

1998-07-27  David Mosberger-Tang  <David.Mosberger@acm.org>

	* Version 0.74 released.

	* configure.in (CPPFLAGS): Save old CPPFLAGS in saved_CPPFLAGS and
	then set CPPFLAGS (not saved_CPPFLAGS!) to include GTK_CFLAGS.
	This should get GIMP detected again.

	* frontend/xscanimage.c (init): Add missing newline.

	* backend/net.c (sane_init): Look for service "sane", not "saned".

	* configure.in (V_MINOR): Make it 74.

	* tools/sane-desc.el: Hack a bit so sane-backends.html can be
	generated some place other than the working directory
	(which may not be writable).

	* tools/sane-desc.el: New file by Matto.

	* doc/Makefile.in (sane-backends-html): New rule to generate
	sane-backends.html.

	* backend/apple.desc: List sane-apple man page.

	* backend/umax.c: Updated with Oliver's latest version (with Irix
	4MB workaround).

	* backend/microtek.c: Updated with Matto's v0.9.
	* backend/microtek.h: Ditto.
	* backend/microtek.conf: Ditto.
	* backend/microtek.desc: Ditto.
	* doc/sane-microtek.man: Ditto.

	* backend/apple.h: Updated with Milon's v0.3.
	* backend/apple.c: Ditto.

	* doc/sane-apple.man: New file (contributed by Milon Firirkis).

1998-07-23  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/canon-scsi.c (reserve_unit): Don't compile unused
	reserve_unit().

	* sanei/sanei_scsi.c: Apply Yuri's patch to add
	sanei_scsi_find_devices() support to OS/2.

	* sanei/sanei_pio.c: Include <sane/sanei_backend.h> instead of
	just <sanei/sanei_debug.h> so we pick up #define's for inb and
	out.

	* include/sane/config.h.in: Mention HAVE_OS2_H and
	HAVE_SYS_TYPES_H.

	* configure.in (AC_CHECK_HEADERS): Mention sys/hw.h and
	sys/types.h.
	(AC_CHECK_LIB): Check for syslog.
	(AC_CHECK_FUNCS): Check for _portaccess.
	(CPPFLAGS): Don't disable qcam backend if we have _portaccess.
	These patches contributed by Yuri for the benefit of OS/2.

	* backend/qcam.c (qc_unlock) [!F_SETLK]: Fall back to convention
	UNIX-style locking using O_EXCL (not ideal, but better than
	nothing at all).
	(qc_lock_wait): Ditto.

	* sanei/sanei_scsi.c (KillDomainServer): Add missing paren.

	* lib/usleep.c [HAVE_SYS_SELECT_H]: Include <sys/select.h>.

	* include/sane/sanei_backend.h: Define i/o-port access
	compatibility macros (by Yuri Dario).

	* backend/Makefile.in (CONFIGS): Mention dummy saned.conf
	(this really ought to go in frontend/Makefile, but I'm too lazy to
	add a configuration-install rule there...).

	* backend/coolscan.c: Update with Didier's latest version.
	(send_one_LUT): Merge in alloca() fix from 1998-04-04.

1998-07-22  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/dll.conf: Mention artec backend.

	* backend/mustek.c (sane_start): Remove duplicate status test.

1998-07-21  David Mosberger-Tang  <David.Mosberger@acm.org>

	* frontend/saned.c (main): Look for service name "sane", not
	"saned".

1998-07-20  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/epson.c (epson_cmd): Add patch by Holger Frahm
	<frahm@itp.uni-hannover.de> to support GT9500.

	* backend/microtek.c: Update with latest version (v0.8).

	* backend/artec.c (PREFER_PIXEL_MODE): Apply Chris Pinkham's
	6/4/98 patch to add preliminary support for AT6 and AT12 scanner
	models.

	* backend/epson.c: Apply Christian Bucher's patch.
	
	* backend/dc25.h: New file (by Peter Fales <psfales@earthling.net>)
	* backend/dc25.c: Ditto.
	* backend/dc25.conf: Ditto.
	* doc/sane-dc25.man: Ditto.

	* backend/microtek2.c: Replace dynamically sized array with
	alloca() to be ANSI C compliant.

	* backend/epson.c: Replace zero-sized byte arrays with 1 byte
	arrays to be ANSI C compliant.

	* doc/sane-hp.man: Mention ScanJet 3P (reported by Patrick Debois
	<Patrick.Debois@lin.vlaanderen.be>).

	* backend/umax.c: Updated with Oliver's 5/7/98 patch.

1998-07-20  Chris Pinkham  <cpinkham@infi.net>

	* backend/artec.c: Added code to default to using millimeters
	instead of pixels for measurements, can revert to pixels by
	defining PREFER_PIXEL_MODE at compilation time.
	
	Added code to cause sane_read to block until data available to return,
	also buffers as much data as possible before returning.

	Added code to cause sane_read to read as much data from scanner as
	possible for each call, previously would read 1 line max from
	scanner.

	Added code to attempt to detect scanner capabilities from scanner
	if scanner supports this command, it not program has defaults
	coded in for certain scanner models.

	Separated horizontal and vertical resolution settings with ability
	to bind them together.  This still has a bug, so the option is is
	disabled by default until I can get it working correctly.

	Bug-fixes to get backend working properly with xscanimage.
	Added preview mode option.
	Added threshold option.

	* backend/artec.h: Added options codes to go along with options
	added in artec.c file.

1998-07-20  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/epson.c (scsi_write): Apply patch by Thomas Bogendoerfer
	<tsbogend@alpha.franken.de> to get Epson backend to work for SCSI
	scanners again.

1998-06-05  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/mustek.c (attach): Move dev_wait_ready() after the check
	for a Mustek scanner.  This is to make sure we don't issue any
	command other than INQUIRY to SCSI devices that are not known to
	be Mustek scanners.

1998-05-22  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/dmc.c: Updated with David Skoll's latest patch.

	* sanei/sanei_scsi.c (sanei_scsi_find_devices): Declare missing
	findtype arg for dummy sanei_scsi_find_devices().

1998-05-16  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/hp.c (attach): Return right after INQUIRY if the device
	doesn't look like an HP scanner.

1998-05-15  David Mosberger-Tang  <David.Mosberger@acm.org>

	* Version 0.73 released.

	* backend/mustek.c (attach): Initialize *devp to 0.

	* configure.in: Use AM_PATH_GTK to figure out if/how to compile
	with gtk libs.

	* aclocal.m4: Include gtk.m4 from gtk-1.0.1 distribution.

	* backend/Makefile.in (install): Change install rule so there is
	guaranteed to be a (symlink) of the form
	libsane-$(BACKEND).so.$(V_MAJOR) pointing to the right version
	of a dll.

	* backend/dll.c (load): Get rid of .la parsing non-sense.  Instead,
	always attempt to open libsane-$(BACKEND).so.$(V_MAJOR).

	* backend/mustek.c (sane_init): Make sure empty lines really
	are ignored.

1998-05-13  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/microtek2.conf: Add line "scsi * * Scanner".
	* backend/microtek.conf: Ditto.

	* sanei/sanei_scsi.c (get_devicename): New function.

	* sanei/sanei_config2.c: New file.

	* sanei/Makefile.in (LIBSANEI_OBJS): Mention sanei_config2.
	(LIBSANEI_LTOBJS): Ditto.

	* sanei/sanei_scsi.c (sanei_scsi_find_devices): New function
	(comes in two flavors: one for Linux, one for the remaining
	platforms).

	* include/sane/sanei_scsi.h: New function.

	* doc/sane-dll.man: Fix to make it work with man2html (use
	\- instead of -).
	* doc/sane-dmc.man: Ditto.
	* doc/sane-epson.man: Ditto.
	* doc/sane-hp.man: Ditto.
	* doc/sane-microtek.man: Ditto.
	* doc/sane-microtek2.man: Ditto.
	* doc/sane-mustek.man: Ditto.
	* doc/sane-pint.man: Ditto.
	* doc/sane-scsi.man: Ditto.
	* doc/sane-umax.man: Ditto.
	* doc/saned.man: Ditto.
	* doc/scanimage.man: Ditto.
	* doc/xscanimage.man: Ditto.

	* doc/Makefile.in (MAN2HTML): New macro.
	(html-man): New rule to generate HTML version of man-pages.

	* configure.in (V_MINOR): Up to 73.

	* backend/umax.conf: Add lines "scsi UMAX" and "scsi LinoHell
	Office".

	* backend/microtek2.h: New file (by Bernd Schroeder
	<bernd@aquila.muc.de>).
	* backend/microtek2.c: Ditto.
	* backend/microtek2.conf: Ditto.

	* backend/dll.conf: Mention "microtek2".

	* backend/apple.conf: Add line "scsi APPLE".
	* backend/mustek.conf: Add lines for "scsi MUSTEK" and "scsi
	SCANNER".

	* backend/apple.c (attach_one): New function.
	(sane_init): Use sanei_config_attach_matching_devices().
	* backend/artec.c: Like for apple.c.
	* backend/canon.c: Ditto.
	* backend/coolscan.c: Ditto.
	* backend/dmc.c: Ditto.
	* backend/epson.c: Ditto.
	* backend/hp.c: Ditto.
	* backend/microtek.c: Ditto.
	* backend/mustek.c: Ditto.
	* backend/s9036.c: Ditto.
	* backend/snapscan.c: Ditto.
	* backend/tamarack.c: Ditto.

1998-05-11  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/snapscan.c (sane_snapscan_get_parameters): Always set
	depth of 8.

	* configure.in: Check for gtk_tooltips_set_tips _after_ gtk
	libraries have been located.  (Patch by Jake E. Hamby
	<jehamby@lightside.com>).

1998-05-09  David Mosberger-Tang  <David.Mosberger@acm.org>

	* sanei/Makefile.in (.c.o): Patch by Kaz Sasayama
	<Kaz.Sasayama@hypercore.co.jp>: invoke $(COMPILE) if libtool
	doesn't give us a regular .o file.
	* lib/Makefile.in (.c.o): Ditto.

	* frontend/preview.c (preview_update): Call update_selection() so
	selection is updated when scanwindow geometry changes.  The patch
	from 1998/4/2 never worked satisfactorily (and indeed was never
	enabled in any of the SANE releases).

1998-05-06  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/mustek.c (sane_init): Use sanei_config_skip_whitespace()
	to skip whitespace.

1998-05-05  David Mosberger-Tang  <David.Mosberger@acm.org>

	* frontend/xscanimage.c (init): Allow -g as an option.

	* sanei/sanei_config.c (sanei_config_get_string): New function.
	(sanei_config_skip_whitespace): Ditto.

	* backend/umax.c: Updated with Oliver's latest patch.

	* Makefile.in (INSTALLED_INCLUDES): Mention sanei_readproc.h.

	* backend/microtek.h: Updated with Matto's 0.7 patch.
	* doc/sane-microtek.man: Ditto.
	* backend/microtek.c: Ditto.
	Added precalibration code:  tries to intelligently have scanner
	run a calibration only once when necessary --- this shaves a solid
	six seconds off every scan!
	Added model code/vendor name for ScanMaker 600ZS.
	Added model codes/vendor name for Agfa Arcus II, StudioScan,
	StudioScan II.
	Patched up 3-pass scanning (forgot to switch color planes).
	Corrected IIHR to 600dpi base resolution.
	Check so that 0x0 regions are recognized as invalid.
	Fixed subtle buffering bug in color scans.
	Fixed-up active/inactive dependencies among options.
	Make sure shadow <= midtone <= highlight.
	Let shadow/midtone/hightlight be active during LineArt and Halftone.
	"Halftoning" option moved into Scan Mode Group (from Enhancement).
	Removed some illegal "TEST_UNIT_READY" commands (during scan).
	Removed "MODE_SENSE_1", since it didn't quite work anyway.

1998-05-03  David Mosberger-Tang  <David.Mosberger@acm.org>

	* frontend/xscanimage.c (scan_preview): Don't register
	preview_window_destroyed as a delete_event handler.

1998-05-02  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/Makefile.in: Remove unused LIBLIB macro.

1998-04-30  David Mosberger-Tang  <David.Mosberger@acm.org>

	Patches by Matto Marjanovic:

	* frontend/gtkglue.c (gsg_close_dialog_callback): Remove
	client_data pointer arg.

	* frontend/xscanimage.c (scan_win_delete): Remove GdkEvent arg.
	(preview_window_destroyed): Ditto.
	(input_available): Include bad_depth handling code only if
	HAVE_LIBGIMP_GIMP_H is defined.
	(scan_dialog): Remove client_data pointer arg.

1998-04-29  David Mosberger-Tang  <David.Mosberger@acm.org>

	* frontend/gtkglue.c (gsg_get_filename): Use gtk_events_pending()
	instead of gdk_events_pending().
	* frontend/preview.c (input_available): Ditto.
	* frontend/xscanimage.c (quit_xscan): Ditto.
	(input_available): Ditto.

1998-04-08  David Mosberger-Tang  <David.Mosberger@acm.org>

	* sanei/sanei_pio.c (sanei_pio_open): Fix prototype.

1998-04-07  David Mosberger-Tang  <David.Mosberger@acm.org>

	* Version 0.72 released.

	* backend/epson.c (sane_init): Fix up config file reading
	to be more like that of other backends.
	(PATH_MAX): Use PATH_MAX instead of FILENAME_MAX.

	* backend/canon.c (sane_init): Read & process canon.conf (patch by
	Yuri Dario <mc6530@mclink.it>).

1998-04-06  David Mosberger-Tang  <David.Mosberger@acm.org>

	* sanei/sanei_init_debug.c (sanei_init_debug): Move up #endif
	so NULL-test works for OS/2, too.

	* frontend/saned.c: Include <sys/types.h>.

	* backend/snapscan.c: Don't include non-ANSI <values.h>.
	(sane_snapscan_start): Use INT_MAX instead of MAXINT.
	(PATH_MAX): Define PATH_MAX as 1024 if not defined otherwise.

1998-04-05  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/umax.c: Updated with Oliver's latest version
	(0.72pre-a).

1998-04-04  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/coolscan.c: Do lalloca.h spiel instead of including
	alloca.h.

	* configure.in: Look for glib/include directory in /usr/local/lib
	and /usr/lib.  Add $C_SWITCH_X_SITE to CPPFLAGS, not DEFS.

	* doc/sane-mustek.man: Mention MFS-1200SP v1.07 as working as
	reported by ehramm@dk3uz.hh.provi.de (Edmund H. Ramm).

1998-04-03  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/canon-scsi.c (request_sense): ifdef out to quiet down
	gcc.

	* backend/artec.c (read_data): Print size_t as (u_long) to make it
	work right and without compiler warning both on 32 and 64 bit
	platforms.
	(artec_get_status): Ditto.
	(init_and_start_scan): Ditto.
	(sane_start): Ditto.
	(sane_read): Ditto.
	(artec_buffer_line_offset): Declare LEN as size_t.
	* backend/epson.c (sane_read): Ditto.

	* sanei/sanei_pio.c (pio_wait): Initialize STAT with 0 to quiet
	down gcc.

	* backend/Makefile.in (libsane-epson.la): Mention sanei_pio.lo.
	(libsane-dll.la libsane.la): Ditto.

	* sanei/Makefile.in (LIBSANEI_OBJS): Mention sanei_pio.o.
	(LIBSANEI_LTOBJS): Mention sanei_pio.lo.

	* frontend/xcam.c (input_available): Undo braindamage regarding
	break out of scan loop (the SANE docs _do_ specify that in
	blocking mode, *len==0 implies end of scan).
	* frontend/xscanimage.c: Ditto.

	* doc/sane-dmc.man: New file by David Skoll.

	* sanei/sanei_DomainOS.c: New file by Paul Walker.

	* backend/snapscan.c (DL_INFO, DL_MAJOR_ERROR): Up error code to 1
	to avoid printing anything unless the user specifically asked
	for this.

	* include/sane/sanei_debug.h (DBG_LEVEL): Define debug level
	variable as macro DBG_LEVEL.

	* README.solaris (NOTE): Emphasize that generic scsi driver
	needs to be installed before running configure.

	* backend/s9036.c: Don't depend on GNU C dynamically sized arrays.
	
	* backend/coolscan.c (send_one_LUT): Use alloca() instead of
	depending on GNU C dynamically sized arrays.
	Include <alloca.h>.

	* frontend/xscanimage.c (input_available): Break out of the
	loop only if LEN==0 _and_ we have a non-negative input tag.
	* frontend/xcam.c (input_available): Ditto.

	* backend/microtek.c (parse_inquiry): Handle for ScanMaker 35t+.
	(id_microtek): Ditto.

1998-04-02  David Mosberger-Tang  <David.Mosberger@acm.org>

	* configure.in (CPPFLAGS): Check for libXi.

	* frontend/gtkglue.c (panel_destroy): Clear dialog elements
	after destroying the panel.

	Patches by Christian Bucher <cbucher@vernetzt.at>:

	* include/sane/sanei_pio.h: New file.
	* sanei/sanei_pio.c: Ditto.
	* backend/epson.c, backend/epson.h, backend/epson.conf: Updated
	with Christian's version adds support for parallel port interface.
	
	* sanei/sanei_scsi.c (sanei_scsi_req_wait): Patch by Matto to let
	sense-handler decide whether a non-zero sense_buffer[0] really
	should be considered an error (needed for Microtek backend).

	* doc/sane.tex (\subsubsection{Option Value Unit}): Document new
	unit SANE_UNIT_MICROSECOND.

	Patches by Oliver Rauch:
	
	* frontend/gtkglue.c (unit_string): Handle SANE_UNIT_MICROSECOND.
	* frontend/scanimage.c (print_unit): Ditto.
	(parse_scalar): Ditto.

	* include/sane/sane.h: Add SANE_UNIT_MICROSECOND.

	* Upgrade to Kevin's latest SnapScan backend (0.4).

	* doc/sane-hp.man: Mention ScanJet IIp C1790A as working (reported
	by Ronald.Vogelaar@nl.origin-it.com).

	* frontend/xscanimage.c (init): Issue an error message when we see
	option -g as this is most likely due to someone invoking
	xscanimage through GIMP when GIMP support is missing.
	(scan_done): Add sanity check.
	(scan_start): Ditto.

	* Upgraded to Matto's latest Microtek backend (0.6).

	* Upgraded to Oliver's latest UMAX backend (0.71h).

	* frontend/preview.c (draw_selection): Fix so that selection is
	updated when sliders are moved.  Patch by Mikko Tyo"la"ja"rvi.

	* backend/snapscan.c (DL_INFO): Increase from 0 to 1.
	(DL_MAJOR_ERROR): Ditto.  This avoids printing error messages
	unless the user specifically requests them.
	
	* frontend/gtkglue.c: Include <sys/types.h>.

	* include/sane/config.h.in: Ignore HAVE_USLEEP under Apollo
	Domain.

	Patches by Paul Walker:

	* sanei/sanei_scsi.c: New Domain OS code.

	* tools/find-scanner.c: Include <sane/config.h>.

	* lib/usleep.c (usleep): Use time_$wait() to avoid broken usleep()
	implementation in Domain Sys5.3 environment.

	* config.sub: Translate sys5.3 into sysv3 for the benefit
	of Apollo Domain/OS.

	* sanei/sanei_init_debug.c (sanei_init_debug): Use DosScanEnv()
	instead of getenv() under OS/2.  (Patch by Yuri Dario
	<mc6530@mclink.it>)

1998-03-02  David Mosberger-Tang  <David.Mosberger@acm.org>

	* frontend/xcam.c (main): Remove obsolete call to
	gdk_set_debug_level (0).

	* backend/mustek.c (attach): Print debug message when discovering
	unknown model.

	* doc/sane-scsi.man: Mention Adaptec 1505.

	* tools/find-scanner.c (main): List FreeBSD specific device names.

	* tools/Makefile.in (LIBS): Define.
	(find-scanner): Mention $(LIBS).

	* backend/epson.conf: New file.

	Patches by Yuri Dario <mc6530@mclink.it>:
	
	* backend/epson.c (sane_init): Support config file.

	* sanei/sanei_ab306.c (outb): Add missing parens.

	* backend/snapscan.c: Don't include <values.h>

	* backend/net.c: Include netdb.h after in.h to appease OS/2.
	Include <sys/types.h>.

	* sane-0.71.spec (%files): Mention sane-dmc.5.
	* doc/Makefile.in (SECT5): Ditto.

	* backend/dmc.c, backend/dmc.h: Update with Feb 26 patch from
	David Skoll.
	* doc/dmc.man: New file by David Skoll.

1998-02-25  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/dmc.c (DMCSetMode): Add missing field name (patch by
	Martin Huber).

	* tools/find-scanner.c (main) [__sun]: Add missing command (patch
	by Martin Huber.

	* sanei/sanei_scsi.c (sanei_scsi_cmd): Fix typo: fd_Info->fd_info
	(patch by Jeff Freedman).

	* configure.os2: Update with patch by Jeff Freedman.

	* backend/snapscan.c (sane_snapscan_start): Replace non-standard
	MAXINT by INT_MAX from <limits.h>.
	(PATH_MAX): Define PATH_MAX as 1024 if not defined by headers.

1998-02-23  David Mosberger-Tang  <David.Mosberger@acm.org>

	* Version 0.71 released.

	* backend/dmc.c (DMCAttach): Close scsi fd before returning.

	* backend/microtek.c: Default to no_dump.
	(sane_init): Change "nodump" into "dump" option.
	* doc/sane-microtek.man: Document this change.

	* backend/snapscan.c: Include <sane/sanei_config.h>.
	(sane_snapscan_init): Use sanei_config_open() instead of fopen().

	* backend/snapscan.c: Upgrade to latest version (0.3 patch 7).
	* backend/snapscan.h: Ditto.
	
	* configure.in (V_MINOR): Up version to 0.71.

	* sanei/sanei_scsi.c (scsi_cmd) [USE == SOLARIS_INTERFACE]: "or"
	in lun instead of overwriting cdb[1] (patch by Martin Huber
	<hu@garfield.m.isar.de>).

	* backend/snapscan.c: Replace <posix1_lim.h> with <limits.h>.

	* backend/mustek.c (fix_line_distance_mfs): Add back missing
	multiplication by bpl (patch by Stefano Garavaglia
	<alter.ego@iol.it>).

	* backend/coolscan.c: Updated with Didier's latest version.
	(COOLSCAN_CONFIG_FILE): Rename from PATH_COOLSCAN_CONFIG and
	define as "coolscan.conf".  Include <sane/sanei_config.h>.
	(sanei_init): Use sanei_config_open() instead of fopen().

	* backend/coolscan-scsidef.h: Ditto.
	* backend/coolscan.h: Ditto.

	* backend/hp.c (sane_close): Change s to s->next (patch by David
	Skoll <dskoll@chipworks.com>).

1998-02-17  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/Makefile.in (PRELOADABLE_BACKENDS): Mention apple &
	coolscan.

	* backend/coolscan.c: New file (by Didier Carlier
	<didier@sema.be>)..
	* backend/coolscan.h: Ditto.
	* backend/coolscan-scsidef.h: Ditto.

	* backend/apple.c: Include <sane/sanei_config.h>
	(APPLE_CONFIG_FILE): Rename from PATH_APPLE_CONFIG.
	(sane_init): Use sanei_config_open().

	* backend/apple.conf: New file.

	* backend/dll.conf: Mention apple & coolscan backends.

	* backend/apple.c: New file (by Milon Firikis
	<milonf@isosun.ariadne-t.gr>).
	* backend/apple.h: Ditto.

	* sane-0.70.spec: Make symlink for libsane.so.0.

	* doc/sane-epson.man: Mention GT-5500 scanner as working (as
	reported by Umberto Zanatta <uzanatta@foscolo.org>).

1998-02-12  David Mosberger-Tang  <David.Mosberger@acm.org>

	* sanei/sanei_scsi.c (DOMAINOS_INTERFACE): Define.  Add
	Apollo Domain/OS support contributed by Paul Walker.

	* configure.in (AC_CHECK_HEADERS): Mention apollo/scsi.h.
	Add #undef of HAVE_APOLLO_SCSI_H.  Add type checks for u_char,
	u_int, u_long (DomainOS reportedly needs these).

	* sanei/sanei_scsi.c (sanei_scsi_req_wait) [USE ==
	LINUX_INTERFACE]: Always check for a non-zero error code in the
	sense-buffer.  The Linux sg driver guarantees that the sense
	buffer is clear to zero when no sense code has been requested, so
	this is safe.

1998-01-28  David Mosberger-Tang  <David.Mosberger@acm.org>

	* Version 0.7 released.

1998-01-27  David Mosberger-Tang  <David.Mosberger@acm.org>

	* frontend/xscanimage.c (quit_xscan): Exit with status 0, not 1.

	* tools/xerox (scale): Added improvements contributed by Joachim
	Woll <woll@physik.uni-kassel.de>.

	* Upgrade to Oliver's latest UMAX backend. 

	* include/Makefile.in (distclean): Add empty all rule.  Add
	distclean rule to delete Makefile.

	* Makefile.in (distclean): Delete japi/Makefile as well (this
	command should be removed once japi gets added to SUBDIRS).

	* backend/Makefile.in (EXTRA): Remove ../lib/usleep.lo and
	../lib/strndup.lo.
	(libsane.la): Make dependent on $(LIBOBJS).

	* frontend/xscanimage.c (preview_window_destroyed): Declare second
	arg (added in some version of gtk?).

	* tools/find-scanner.c (main): Change __sgi__ to __sgi.

1998-01-26  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/microtek.c: Don't declare strdup()---you're bound to get
	it wrong for some platforms!

	* doc/sane-scsi.man: Say explicity that generic SCSI support needs
	to be enabled.

	* doc/sane-hp.man (Problems): Document PhotoSmart problems
	as reported Peter Kirchgessner <Pkirchg@aol.com>.

	* backend/snapscan.c: Upgrade to v0.3 from
	http://www.cs.ualberta.ca/~charter/snapscan.html.
	* backend/snapscan.h: Ditto.

1998-01-22  David Mosberger-Tang  <David.Mosberger@acm.org>

	SnapScan backend by Franck Schnefra, Michel Roelofs and
	Kevin Charter:

	* backend/snapscan.c: New file.
	* backend/snapscan.h: Ditto.
	* backend/snapscan.conf: Ditto.

	* backend/umax-scanner.h (scanner_str): Add missing comma.

	* sanei/sanei_scsi.c (sanei_scsi_cmd): Pass sense_handler_arg to
	sense handler for BSD_INTERFACE, HPUX_INTERFACE,
	OPENSTEP_INTERFACE, DECUNIX_INTERFACE, SCO_OS5_INTERFACE,
	OS2_INTERFACE, IRIX_INTERFACE, AIX_GSC_INTERFACE, and
	SOLARIS_INTERFACE.

	* include/sane/config.h.in: Add missing #undef of
	HAVE_SYS_SCSI_TARGETS_SCGIO_H.
	Ditto for HAVE_SYS_SCSI_SGDEFS_H.

1998-01-20  David Mosberger-Tang  <David.Mosberger@acm.org>

	* Version 0.69 released.

	* doc/sane-scsi.man: Limit ncr810 patch to kernel versions <
	2.0.33.

	* tools/xerox (HEIGHT): Add A4 paper size as comment.

1998-01-19  David Mosberger-Tang  <David.Mosberger@acm.org>

	* frontend/preview.c (make_preview_image_path): New function.
	(preview_destroy): Save scan surface parameters as a comment
	in the preview image.
	(restore_preview_image): Read scan surface parameters from
	preview image file and restore only if the parameters match
	the currently selected surface.
	(paint_image): Gracefully handle NULL image_data.
	(event_handler): Don't call restore_preview_image().
	(preview_update): Detect if the scan surface changed.  If so,
	establish a new preview widget size, preview area size, and
	restore a preview image, if available.

	* backend/mustek.c (sense_handler): Declare closure argument.

	* sanei/sanei_scsi.c (sanei_scsi_open): Fix typos.

	* backend/umax-scsi.c (umax_open_scanner): Pass us as sense_arg.
	(umax_open_scanner): Ditto.
	(umax_open_scanner): Ditto.
	* backend/umax.c (sane_start): Ditto.

	* backend/canon.c (attach): Pass 0 as sense_arg to sanei_scsi_open().
	(sane_start): Ditto.
	* backend/epson.c (attach): Ditto.
	(sane_start): Ditto.
	* backend/tamarack.c (sense_handler): Ditto.
	* backend/s9036.c (sane_start): Ditto.
	* backend/mustek.c (dev_open): Ditto.
	* backend/hp.c (attach): Ditto.
	(sane_start): Ditto.
	* backend/mustek.c (dev_open): Ditto.
	* tools/find-scanner.c (main): Ditto.

	* include/sane/sanei_scsi.h (SANEI_SCSI_Sense_Handler): Declare
	closure arg.
	(sanei_scsi_open): Ditto.

	* doc/sane-hp.man (Model): Remove obsolete comment regardign 5P.

1998-01-17  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/mustek.c (dev_open): Fix debug message.

	* Solaris related patches by Martin Huber:
	
	* backend/umax-scsi.c (umax_wait_scanner): Sleep for 1 second
	instead of 100ms on Sun platforms---the SCHILYscg driver prints a
	warning message each time a device is busy.  Duh.
	(umax_get_data_buffer_status): Don't do
	umax_get_data_buffer_status() on Sun's.  This should be fixed...

	* sanei/sanei_scsi.c (sanei_scsi_open): Call unit_ready() towards
	the end of this function.
	(CCS_SENSE_LEN): Define as 18 if not defined
	by any header files.
	(sanei_scsi_cmd): Use sensebuffer to collect sense info.
	(scsi_cmd): Better error handling when using SCHILYscg driver.

1998-01-14  David Mosberger-Tang  <David.Mosberger@acm.org>

	* frontend/xscanimage.c (scan_start): Turn off dialog sensitivity.
	(scan_done): Restore dialog sensitivity.

	* backend/qcam.c (init_options): Turn on SANE_CAP_ALWAYS_SETTABLE.

	* frontend/preview.c (scan_done): Enable dialog sensitivity.
	(scan_start): Disable dialog sensitivity.

	* include/sane/sane.h (SANE_CAP_ACTIVE_WHILE_SCANNING): New
	manifest constant.

1998-01-12  David Mosberger-Tang  <David.Mosberger@acm.org>

	* frontend/gtkglue.c (panel_destroy): Call gtk_tooltips_unref()
	instead of gtk_tooltips_destroy() as suggested by Ben Gertzfield
	<che@debian.org>.

1997-12-25  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/canon.c: New file by Helmut Koeberle
	<helmut.koeberle@bytec.de>.
	(sane_start): Print variables of type size_t as %lu and cast to
	(u_long), to make it compile without warning on all platforms.
	(attach): Remove extraneous semicolon.

	* backend/canon.h (canon_h): Ditto
	* backend/canon-scsi.c: Ditto.

1997-12-24  David Mosberger-Tang  <David.Mosberger@acm.org>

	* sanei/sanei_ab306.c (sanei_ab306_cmd): Write the first
	6 bytes of a SCSI command only (suggested by Andreas, but
	is this really correct??).

	* backend/mustek.c (gamma_correction): Add patch by Andreas
	Czechanowski <andreas@inspc44c.ins.uni-stuttgart.de> to
	fix lineart scanning for Paragon II 600 N scanner.

1997-12-23  David Mosberger-Tang  <David.Mosberger@acm.org>

	* tools/find-scanner.c (scanner_identify_scanner): Print info on
	all SCSI devices when --verbose is in effect.
	(main): Add Sun device names.

	* include/sane/config.h.in: Define _POSIX_SOURCE and
	__EXTENSIONS__ when compiling on a Sun with GCC.

	* configure.in (AC_CHECK_HEADERS): Mention sys/scsi/sgdefs.h and
	sys/scsi/targets/scgio.h.

1997-12-17  David Mosberger-Tang  <David.Mosberger@acm.org>

	* frontend/xscanimage.c (device_dialog): Suggestion by Matt: set
	window auto-shrink by calling gtk_window_set_policy().

	* japi/ImageCanvas.java: Updated with Jeff's latest patch.
	* japi/Jscanimage.java: Ditto.
	* japi/Makefile.in: Ditto.
	* japi/README.JAVA: Ditto.
	* japi/ScanIt.java: Ditto.
	* japi/ImageCanvasClient.java: New file.

1997-12-16  David Mosberger-Tang  <David.Mosberger@acm.org>

	* frontend/gtkglue.c (panel_build): Patch by Matt: a) For all
	individual options flagged as "advanced", panel_build will only
	display the option if the "Show advanced" button is toggled.
	Group identifiers flagged as "advanced" are handled the same as
	before.  b) panel_rebuild is called whenever the "Show advanced"
	button is toggled on or off.

	* doc/sane-scsi.man: Mention sane-epson(5) and sane-microtek(5).
	* doc/scanimage.man: Ditto.
	* doc/xscanimage.man: Ditto.

	* doc/sane-microtek.man: New file by Matt.

	* backend/microtek.c: Updated with Matt's version 0.4.
	* backend/microtek.h: Ditto.
	* backend/microtek.conf: Ditto.

	* doc/Makefile.in (SECT5): Mention sane-microtek.5.

1997-12-15  Fred Hucht & Michael Staats <{fred|michael}@thp.Uni-Duisburg.DE>

	* Added support for generic SCSI under AIX 4.1.x using the device
	driver gsc written by Matthew Jacob <mjacob@feral.com> (nice piece
	of work!).
	Find this driver under
	ftp://ftp.feral.com/pub/aix/gsc.tar.gz or
	ftp://ftp.thp.Uni-Duisburg.DE/pub/source/gsc.tar.gz.
	Changed files: sanei/sanei_scsi.c, include/sane/config.h.in,
	configure.in.

	* Moved '#include <lalloca.h>' to very beginning in all source
	files as AIX needs it there.

	* Added define OUTFILENAME to frontend/xscanimage.c.

	* Fixed wrong environment reference in /doc/sane-scsi.man.

	* Several changes in tools/find-scanner.c to run using
	above mentioned driver.
	Fixed wrong IN_periph_devtype_cpu (was 1, should be 3).	

1997-12-14  David Mosberger-Tang  <David.Mosberger@acm.org>

	* doc/sane-hp.man: Mention ScanJet 4P (reported to work by
	Adam Sjoegren <asjo@diku.dk>).

1997-12-09  David Mosberger-Tang  <David.Mosberger@acm.org>

	* frontend/saned.c (check_host): Change len from size_t to int to
	match getpeername() as per Single Unix Spec (as opposed to POSIX
	drafts...).
	(start_scan): Ditto for getsockname().
	* backend/net.c (sane_start): Ditto.

	* backend/tamarack.c (TAMARACK_CONFIG_FILE): Delete.
	(TAMARACK_CONFIG_FILE): New macro.
	Include <sane/sanei_config.h>.
	(sane_init): Use sanei_config_open() instead of fopen().
	(read_data): Declare nbytes as size_t---makes a difference
	on 64-bit platforms.

1997-12-07  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/s9036.c (sane_init): Run through "indent -gnu". Use
	sanei_config_open() instead of fopen().  Include
	<sane/sanei_config.h>.
	(read_more_data): Print size_t variables by casting them to
	(u_long) and using %lu format (some platforms have size_t as
	u_long, others as u_int, which does make a difference if
	sizeof(long) > sizeof(int).
	(sane_start): Ditto.
	Add English translation for comments that were in German only.

	* backend/s9306.c: New file by Ingo Schneider.
	* backend/s9306.h: New file by Ingo Schneider.

1997-12-04  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/mustek.c (sane_cancel): Collect child process status
	after killing it (avoids accumulating zombie processes).  Reported
	by Mike Sweet.
	* backend/umax.c (sane_cancel): Ditto.
	* backend/qcam.c (sane_close): Ditto.
	(sane_cancel): Ditto.

1997-12-03  David Mosberger-Tang  <David.Mosberger@acm.org>

	* Version 0.68 released.

1997-12-02  David Mosberger-Tang  <David.Mosberger@acm.org>

	* frontend/scanimage.c (window_val_user): New variable.
	(fetch_options): Don't overwrite window_val[i] if it's
	user-specified.
	(main): Set window_val_user[i] as necessary.

	* backend/mustek.c (send_gamma_table): New function.
	(sane_start): Send gamma table both before and after start_scan().
	The MFS-06000CX is reported to need the gamma-table before
	start_scan() and the Mustek docs do indeed indicate downloading
	the gamma-table twice.
	(init_options): Make --custom-gamma option active by default (since
	gray-scale mode is the default mode).

1997-11-30  David Mosberger-Tang  <David.Mosberger@acm.org>

	* doc/sane-mustek.man: Mention MFC-08000CZ.

	* backend/mustek.c (attach): Reduce y_range.max for MFC-08000CZ
	from 300 to 292mm as reported by Jeroen Steenblik
	<jeroens@esrac.ele.tue.nl>.  Ditto for MFC-06000CZ.

1997-11-28  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/umax-scanner.h (scanner_str): Add "Astra 610S".
	(known_scanners): Increment from 13 to 14.

	PP fixes by Andreas Czechanowski:
	* backend/mustek.c (EXTRA_SAVE_LINES): New macro.
	(fix_line_distance_pp): Use EXTRA_SAVE_LINES instead of hardcoded
	constant.  Various fixes to make it actually work.
	(reader_process): Initialize s->ld_ld_line to zero.

	* backend/mustek.h (struct Mustek_Scanner): Add member ld_line.

1997-11-26  David Mosberger-Tang  <David.Mosberger@acm.org>

	* tools/Makefile.in (.c.o): Add this rule.

	* tools/find-scanner.c: Include sanei_scsi.h and sanei_debug.h
	via <> quotes (note "").

1997-11-25  David Mosberger-Tang  <David.Mosberger@acm.org>

	* sanei/sanei_ab306.c (sanei_ab306_exit): Fix by Andreas
	Czechanowski: output 0x00 at port[i].base + 1 instead.

1997-11-22  David Mosberger-Tang  <David.Mosberger@acm.org>

	* doc/sane-mustek.man (Model): Clarify that paralell port != printer
	port.

	* backend/mustek.c (fix_line_distance_mfs): Add missing SANE_UNFIX()
	calls for x_range.max and dpi_range.max.
	(fix_line_distance_pp): Correct based on Andreas' feedback.

1997-11-18  David Mosberger-Tang  <David.Mosberger@acm.org>

	* configure.in (CFLAGS): Don't specify -ansi---with older libcs,
	it's causing more problems than it's worth.

	* Patch by Jeff Freedman:

	* japi/Sane.c: Limit string length to option size.

	* japi/SaneOption.java: Fix indentation.
	(unitString): New function.
	
	* japi/ImageCanvas.java: New file.
	* japi/Jscanimage.java: Ditto.
	* japi/ScanIt.java: Ditto.
	
	* japi/Makefile.in (CLASSES): Mention ScanIt.class and
	ImageCanvas.class.
	(all): Mention Jscanimage.class.
	* japi/Scan.c: Include <string.h>.
	(String_length): New function.

1997-11-16  David Mosberger-Tang  <David.Mosberger@acm.org>

	* frontend/gtkglue.c (scale_update): In recent versions of GTK,
	"value_changed" callbacks no longer return a value.  Change this
	function to type "void" accordingly.

	* sanei/sanei_scsi.c: Declare cam_fd only if USE ==
	DECUNIX_INTERFACE.

	* sanei/sanei_load_values.c (sanei_load_values): Detect errors
	while reading the option name (first call to sanei_w_string()).
	Reported by Geoffrey T. Dairiki.

	* sanei/sanei_ab306.c [HAVE_UNISTD_H]: Include <unistd.h>.  Fix by
	Geoffrey T. Dairiki.

	* lib/alloca.c: Enclose in #ifndef HAVE_ALLOCA bracket.  Fix by
	Geoffrey T. Dairiki.

	* include/lalloca.h: Declare alloca() as returning void* when
	__STDC__ is in effect so declaration matches definition in
	lib/alloca.c.  Reported by Geoffrey T. Dairiki.

	* frontend/preview.c (update_selection): Set coord[] values to
	rounded-to-nearest-int of float values.  This avoids the jumping
	selection box effect. Fix by Geoffrey T. Dairiki.

	* frontend/gtkglue.c (scale_update): Patch by Geoffrey T. Dairiki
	<dairiki@apl.washington.edu>: emit value_changed signal if the
	backend changed the value.

	* backend/umax.c: Upgraded to Oliver's latest UMAX version.

	* backend/mustek.c (sane_init): Ignore white space in front of an
	option/device-name.

1997-11-12  David Mosberger-Tang  <David.Mosberger@acm.org>

	* sanei/sanei_ab306.c (sanei_ab306_get_io_privilege):
	(struct port): Remove member HAVE_IO_PRIVS.
	(sanei_ab306_get_io_privilege): Get ioperm()issions independent of
	HAVE_IO_PRIVS.

	* backend/mustek.c (do_stop): Always send STOP command before
	closing the device.
	(dev_read_req_enter): For parallel-port scanner, set *idp to 0.

1997-11-10  David Mosberger-Tang  <David.Mosberger@acm.org>

	Bug reported by Matto Marjanovic <maddog@mir.com>:

	* frontend/gtkglue.c (panel_build): Create button only after we
	know the option's value.
	(button_new): Add VAL argument and initialize button state to

	correct value before connecting the toggled callback.

	Bugs reported by Petter Reinholdtsen <pere@link.no>:
	
	* sanei/sanei_config.c (sanei_config_open): Add missing cast to
	(char *).

	* sanei/sanei_scsi.c (sanei_scsi_cmd) [USE == IRIX_INTERFACE]: Fix
	(u_char) cast to (u_char *).

1997-11-06  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/qcam.c (init_options): Set the type of OPT_NUM_OPTS to
	SANE_TYPE_INT (suggested by Guido Muesch
	<odiug@faho.rwth-aachen.de>).
	* backend/mustek.c (init_options): Ditto.

1997-11-04  David Mosberger-Tang  <David.Mosberger@acm.org>

	* frontend/xcam.c (xcam_exit): Protect against recursive
	invocation.
	(main): Turn on preferences.advanced as no graphical geometry
	selection exists right now.
	Include <preferences.h>.
	preferences: New variable.
	(pref_toggle_advanced): New function.
	(pref_toggle_tooltips): Ditto.
	(build_preferences_menu): Add button to control advanced & tooltips
	preferences.

	* doc/sane.tex (subsection{sanecontrol_option}): Make it illegal
	for SANE_INFO_RELOAD_OPTIONS to be set needlessly.

	* backend/hp.c (sane_control_option): Only turn on RELOAD_PARAMS
	when value changed.
	
	* backend/qcam.c (sane_control_option): Only turn on
	RELOAD_PARAMS when value changed.

	* backend/mustek.c (sane_control_option): Only turn on
	RELOAD_OPTIONS and/or RELOAD_PARAMS when value changes.

	* Integrate b&w quickcam fixes by Guido Muesch
	<odiug@faho.rwth-aachen.de>:

	* backend/qcam.c (bw_x_range, odd_bw_x_range, bw_y_range,
	odd_bw_y_range): New constants.
	(sane_open): Disable despeckle, black-level, hue, saturation,
	resolution & test options for b&w camera (either not useful or not
	supported at this point).
	(sane_start): Use QC_MONO_SET_CONTRAST instead of
	QC_BW_SET_CONTRAST.
	(sane_start): Call qc_reset() for b&w camera to avoid hangs (color
	camera doesn't need this and is faster that way).
	(sane_start): Multiply undecimated_width by s->val[OPT_DEPTH].w,
	not 4.

	* backend/qcam.h: Remove obsolete QC_BW_SET_CONTRAST,
	QC_BW_AUTO_ADJUST_OFFSET, QC_BW_GET_OFFSET, and QC_SET_CONTRAST
	macros.

1997-11-02  David Mosberger-Tang  <David.Mosberger@acm.org>

	* doc/sane-hp.man (Model): Mention ScanJet IIcx.  Johannes Geiger
	<J_Geiger@fleury.de> reported it to work fine under OS/2 with
	sane-0.66

	* backend/umax.c: Apply patch by Oliver Rauch that avoid
	umax hangs.

1997-11-01  David Mosberger-Tang  <David.Mosberger@acm.org>

	* Version 0.67 released.

	* sanei/sanei_ab306.c: New file.

	* backend/mustek.h (MUSTEK_FLAG_PP): New macro.
	(struct Mustek_Scanner): Add members ld.index and ld.lmod3
	for parallel-port scanner line-distance correction.

	* backend/mustek.c (color_seq): Move to global level from
	fix_line_distance_normal().
	(fix_line_distance_pp): New function.
	(scsi_wait_ready): Renamed from wait_ready().
	(pp_wait_ready): New function.
	(dev_wait_ready): Ditto.
	(dev_open): Ditto.
	(dev_cmd): Ditto.
	(dev_req_wait): Ditto.
	(dev_read_start): Ditto.
	(dev_read_req_enter): Ditto.
	(dev_close): Ditto.
	(attach): Modify to use dev_open().  Set minimum scan resolution
	to 51 dpi for parallel-port scanners.
	(scan_area_and_windows): Call dev_cmd() instead of
	sanei_scsi_cmd().
	(mode_select): Ditto.
	(gamma_correction): Ditto.
	(start_scan): Ditto.
	(stop_scan): Ditto.
	(line_distance): Ditto.
	(get_image_status): Ditto.
	(backtrack_and_adf): Ditto.
	(gamma_correction): Return immediately if custom-gamma is turned
	off or if not doing a multibit scan.  Add support for sending all
	three gamma tables with a single command.
	(line_distance): Initialize additional line-distance correction
	state needed by parallel-port scanner.
	(read_req_enter): Remove.
	(send_data): Modify to support parallel-port scanner line-distance
	correction.
	(reader_process): Require I/O-privilege if dealing with parallel
	port scanner and call dev_read_start().  Use dev_read_req_enter()
	instead of read_req_enter(), dev_req_wait() instead of
	sanei_scsi_req_wait().
	(sane_start): For parallel-port scanner, send gamma table with
	a single gamma_correction() call.

	* doc/sane-mustek.man: Update with info regarding parallel port
	scanner.

	* backend/dll.c (add_backend): When a backend is present already,
	move it to the head of the backend list, so pre-loaded backends
	appear in the same order as if they had been loaded dynamically

	* backend/mustek.c (pp_mode_list): New constant.

	* backend/mustek.c (init_options): Use pp_mode_list for parallel
	port type scanners (no color lineart/halftone modes).

	* sanei/sanei_codec_ascii.c (ascii_w_string): free(*s) only if *s
	is non-NULL (reported by Geoffrey T. Dairiki
	<dairiki@apl.washington.edu>).

	* backend/mustek.c (attach): Turn on MUSTEK_FLAG_LD_NONE for
	MFS-12000SP with firmware 1.02 or newer. Reported by Henning
	Busacker <henning.busacker@Duesseldorf.netsurf.de>.

1997-10-25  David Mosberger-Tang  <David.Mosberger@acm.org>

	* doc/sane.tex (chapter{Contact Information}): Update mailing list
	and home page address.

	* backend/dll.c: Include <sane/sanei_config.h>.  Call
	sanei_config_open() instead of fopen().
	* backend/hp.c: Ditto.
	* backend/mustek.c: Ditto.
	* backend/net.c: Ditto.
	* backend/pint.c: Ditto.
	* backend/qcam.c: Ditto.
	* backend/umax.c: Ditto.

	* backend/Makefile.in (EXTRA): Mention ../sanei/sanei_config.lo.

	* doc/sane-dll.man: Document SANE_CONFIG_DIR.
	* doc/sane-hp.man: Ditto.
	* doc/sane-mustek.man: Ditto.
	* doc/sane-net.man: Ditto.
	* doc/sane-pint.man: Ditto.
	* doc/sane-qcam.man: Ditto.
	* doc/sane-scsi.man: Ditto.
	* doc/sane-umax.man: Ditto.
	* doc/saned.man: Ditto.

	* backend/microtek.c: Updated with v0.3 from Matt.
	Include <sane/sanei_config.h>
	(MICROTEK_CONFIG_FILE): Define as "microtek.conf".
	(PATH_MICROTEK_CONFIG): Delete.
	(sane_init): Replace fopen() with sanei_config_open().

	* backend/microtek.h: Ditto.

1997-10-24  David Mosberger-Tang  <David.Mosberger@acm.org>

	* sanei/sanei_config.c (sanei_config_open): Add multiple-directory
	support for SANE_CONFIG_DIR.

	* sanei/sanei_config.c: New file by Jeff Freedman.
	* include/sane/sanei_config.h: Ditto.

1997-10-23  David Mosberger-Tang  <David.Mosberger@acm.org>

	* Fixes for OS/2 by Jeff Freedman:
	* frontend/Makefile.in (SBINPROGS): Set to @SANED@.
	* configure.os2 (LN_S): Add --sysconfdir=.
	* configure.in: Set up SANED depending on <sys/socket.h>.
	* backend/Makefile.in (EXTRA): Mention usleep.lo and strndup.lo.
	* backend/pnm.c (rgblength, rgbbuf, rgbleftover): Declare as
	static.
	* ltconfig: Upgrade to 1.0d.
	* ltmain.sh: Ditto.
	* sanei/sanei_constrain_value.c: Include <sane/config.h>.

1997-10-22  David Mosberger-Tang  <David.Mosberger@acm.org>

	* frontend/gtkglue.h (struct GSGDialog): Remove idle_id member.

	* frontend/gtkglue.c (idle_handler): Remove.  GTK's reference
	counting appears to have been fixed (?).

	* backend/umax_scanner.h: Update with Oliver's latest version.
	* backend/umax-scsi.c: Ditto.
	* backend/umax-scsidef.h: Ditto.
	* backend/umax-struct.h: Ditto.
	* backend/umax.c: Ditto.
	* backend/umax.h: Ditto.

1997-10-18  David Mosberger-Tang  <David.Mosberger@acm.org>

	* sanei/sanei_scsi.c (sanei_scsi_req_enter): Set cdb.hdr.pack_id
	to unique id number.

1997-10-17  David Mosberger-Tang  <David.Mosberger@acm.org>

	* japi/Makefile.in: New file (by Jeff Freedman <jsf@hevanet.com>).
	* japi/README.JAVA: Ditto.
	* japi/Sane.c: Ditto.
	* japi/Sane.java: Ditto.
	* japi/SaneDevice.java: Ditto.
	* japi/SaneOption.java: Ditto.
	* japi/SaneParameters.java: Ditto.
	* japi/SaneRange.java: Ditto.
	* japi/Test.java: Ditto.

	* configure.in (AC_OUTPUT): Mention japi/Makefile.

	* sanei/sanei_scsi.c (sanei_scsi_cmd) [USE == IRIX_INTERFACE]:
	Add data buffer alignment fix by Michael Sweet.

1997-10-24  Jeff Freedman <jsf@hevanet.com>

	* sanei_open_config() added.  Backends call it to open .conf files.

1997-10-14  David Mosberger-Tang  <David.Mosberger@acm.org>

	* Version 0.66 released.

	* README: Update with new URLs and latest GIMP/GTK info.

1997-10-11  David Mosberger-Tang  <David.Mosberger@acm.org>

	* include/sane/saneopts.h: Add #defines for TEN_BIT_MODE, WARMUP,
	RGB_PREVIEW_PATCH, and START_SCAN_PATCH.

	* README: Remove umax-specific configure options (they're now
	runtime options).
	* configure.in (CPPFLAGS): Ditto.
	* include/sane/config.h.in: Ditto.

	* backend/epson.c: Updated 

1997-10-09  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/umax.c (sane_exit): Remove bogus call to free()
	(reported by Peter).

Thu Oct  9 20:20:32 1997  Kazuhiro Sasayama  <kaz@hypercore.co.jp>

	* epson.c (sane_start): Fix lcount computation.

Thu Oct  9 11:44:03 1997  Kazuhiro Sasayama  <kaz@hypercore.co.jp>
	* epson.c (sane_start): Use byte-interleaved mode if available.
	(sane_start): Set line counter for byte-interleaved mode.
	(sane_read): Handle byte-interleaved mode.
	(sane_init) [PACKAGE && VERSION]: Debug out PACKAGE and VERSION.

Tue Oct  7 18:44:36 1997  Kazuhiro Sasayama  <kaz@hypercore.co.jp>

	* epson.c (set_lcount): New function.
	(sane_start): Use block mode for monochrome if available.
	(sane_read): Handle block mode.

	* epson.h (struct Epson_Scanner): Add block.

Tue Oct  7 15:48:11 1997  Kazuhiro Sasayama  <kaz@hypercore.co.jp>

	* epson.c (set_speed): New function.
	(sane_start): Use set_speed.

Tue Oct  7 15:44:33 1997  Kazuhiro Sasayama  <kaz@hypercore.co.jp>

	* README: Add info about a mailing list.

	* Makefile.am (libsane_epsonx_la_LDFLAGS): Increment the revision.

	* epson.c (identify): Debug output the command level.

1997-10-08  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/mustek.conf: Turn on linedistance-fix and lineart-fix by
	default.

	* include/sane/config.h.in: Remove
	NEED_MUSTEK_LINE_DISTANCE_WORKAROUND.

	* doc/sane-mustek.man (CONFIGURATION): Document option
	linedistance-fix and lineart-fix.

	* configure.in: Remove test for --enable-ld-fix.

	* backend/mustek.h (MUSTEK_FLAG_LD_FIX): New flag.
	(MUSTEK_FLAG_LINEART_FIX): Ditto.

	* backend/mustek.c (line_distance): Replace
	NEED_MUSTEK_LINE_DISTANCE_WORKAROUND with runtime test for same.
	(reader_process): If MUSTEK_FLAG_LINEART_FIX is on, delay 200ms
	when scanning in lineart mode.
	(sane_init): New variable.  Add linedistance-fix and lineart-fix
	support.

	* backend/Makefile.in (install): Fix install rule so all symlinks
	necessary for libsane.so are installed.

	* backend/dll.c (load): Change from LIBNAME to LIBPATH (as per
	libtool-1.0c documention).

	* sanei/sanei_scsi.c (issue): Declare `static'.

	* aclocal.m4: Update with contents of libtool.m4.

	* configure.in (AC_PROG_RANLIB): Remove (once again!).

	* config.guess: Update from libtool-1.0c.
	* config.sub: Ditto.
	* ltconfig: Ditto.
	* ltmain.sh: Ditto.

	* backend/epson.c: Update with Kazuhiro's latest epson version
	(1.1.6).

1997-10-07  David Mosberger-Tang  <David.Mosberger@acm.org>

	* frontend/gtkglue.c (panel_destroy): Clear elem->menu after
	freeing it (reported by Kazuhiro Sasayama <kaz@hypercore.co.jp>).

1997-10-06  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/epson.c: Updated with Kazuhiro Sasayama
	<kaz@hypercore.co.jp> latest version (1.1.5).

1997-10-04  David Mosberger-Tang  <David.Mosberger@acm.org>

	* Version 0.65 released.

	* sanei/sanei_scsi.c (close_aspi): Rename from sanei_close_aspi (static
	functions don't need ugly sanei_ prefix...).
	(open_aspi): Ditto.

	* configure.os2: New file (from Jeff's config.os2).

	* backend/umax-scsi.c: Mmove include of <scsi/scsi.h> and
	<scsi/sg.h> into !def UMAX_TO_SANE bracket.

	* backend/pnm.c (getparmfromfile): Open with mode "rb" to get
	binary file on platforms where this is meaningful.

1997-10-02  David Mosberger-Tang  <David.Mosberger@acm.org>

	* doc/sane-epson.man: Mention that backend is known to work with
	GT-5000.

1997-10-01  David Mosberger-Tang  <David.Mosberger@acm.org>

	* doc/sane-epson.man: New file (based on Kzuhiro's README file).

	* backend/Makefile.in (PRELOADABLE_BACKENDS): Mention epson.
	(libsane-epson.la): Add dependencies for Epson backend.

	* backend/epson.c: New file by Kazuhiro Sasayama
	<kaz@hypercore.co.jp>.
	* backend/epson.h: Ditto.

	* backend/microtek.c: Updated with latest version from
	http://www.mir.com/mtek/ by Matt Marjanovic <maddog@mir.com>.
	* backend/microtek.h: Ditto.
	
1997-10-3   Jeff Freedman <jsf@hevanet.com>

	* sanei/sanei_scsi.c:  Minor fixes for OS/2 support.

	* configure.in: Check for presence of sys/socket.h to set @NET@.

	* backend/Makefile.in: net -> @NET@

1997-09-30  David Mosberger-Tang  <David.Mosberger@acm.org>

	* sanei/sanei_scsi.c: Integrate OS/2 support by Jeff Freedman:
	(OS2_INTERFACE) Define.
	(open_aspi,close_aspi): New OS/2-specific functions.
	(sanei_scsi_open): Add OS/2 support.
	[USE = OS2_INTERFACE]: OS/2 version of sanei_scsi_cmd().
	(sanei_scsi_cmd, sanei_scsi_req_wait) [STUBBED_INTERFACE]:
	Return proper value.
	
	* include/sane/config.h.in (HAVE_STRNCASECMP, HAVE_OS2_H): Add
	#undef.  If !HAVE_STRNCASECMP, define strncasecmp macro as
	alias for strnicmp.

	* configure.in (AC_CHECK_FUNCS): Check for strncasecmp().
	(AC_CHECK_HEADERS): Check for os2.h.

1997-09-30  David Mosberger-Tang  <David.Mosberger@acm.org>

	* sanei/sanei_scsi.c: Integrate OS/2 support by Jeff Freedman:
	(OS2_INTERFACE) Define.
	(open_aspi,close_aspi): New OS/2-specific functions.
	(sanei_scsi_open): Add OS/2 support.
	[USE = OS2_INTERFACE]: OS/2 version of sanei_scsi_cmd().
	(sanei_scsi_cmd, sanei_scsi_req_wait) [STUBBED_INTERFACE]:
	Return proper value.
	
	* include/sane/config.h.in (HAVE_STRNCASECMP, HAVE_OS2_H): Add
	#undef.  If !HAVE_STRNCASECMP, define strncasecmp macro as
	alias for strnicmp.

	* configure.in (AC_CHECK_FUNCS): Check for strncasecmp().
	(AC_CHECK_HEADERS): Check for os2.h.

1997-09-24  David Mosberger-Tang  <davidm@azstarnet.com>

	* Version 0.64 released.

	* PROJECTS (Backend): Update microtek entry.
	Add entry for sgivl.

	* backend/microtek.conf: New file.

	* backend/dll.conf: Mention microtek.

	* backend/Makefile.in (PRELOADABLE_BACKENDS): Mention microtek.
	(libsane-microtek.la): Mention microtek dependencies.

	* backend/microtek.c: New file by Matthew Marjanovic.
	* backend/microtek.h: Ditto.

1997-09-23  David Mosberger-Tang  <davidm@azstarnet.com>

	* sanei/sanei_scsi.c (sanei_scsi_cmd): Integrate Michael Sweet's
	latest Irix implementation of sanei_scsi_cmd().

Sat Sep  6 08:59:24 1997  David Mosberger-Tang  <David.Mosberger@acm.org>

	* Version 0.63 released.

	* configure.in (V_MINOR): Bump up to 63.

	* configure.in (AM_PROG_RANLIB): Go back to AC_PROG_RANLIB.  The
 	former causes a bad configure script.

Fri Aug 29 16:08:05 1997  David Mosberger-Tang  <David.Mosberger@acm.org>

	* doc/sane-umax.man: Change status of "Astra 1200S" to "all modes ok"
	as Oliver tells me that this has been tested and is working now.

Wed Aug 20 17:23:04 1997  David Mosberger-Tang  <David.Mosberger@acm.org>

	* sane-0.63.lsm: Update email addresses etc.

	Integrate Oliver Rauch's UMAX improvements:

	* README: Document --enable-umax-preview-fix,
 	--enable-umax-start-scan-fix.

	* configure.in (UMAX_RGB_PREVIEW, UMAX_START_SCAN_PATCH): Define if
	necessary.

	* include/sane/config.h.in (UMAX_RGB_PREVIEW, UMAX_START_SCAN_PATCH):
	Add #undef.

	* include/sane/saneopts.h: Add manifest constants for options
	resolution-bind, negative, quality-cal, threshold, analog-gamma,
	analog-gamma-r, analog-gamma-g, analog-gamma-b, analog-gamma-bind,
	smear, white-bind, black-bind.

	* AUTHORS (Frontends): Update email addresses of Oliver Rauch and
	myself.

1997-08-07  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/mustek.c (attach): Print Mustek scanner info at
	debug level 2, not 3.

1997-08-06  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/preview.c (XSERVER_WITH_BUGGY_VISUALS): Make conditional
	on #ifdef __alpha__ (Michael Sweet reports that the old code broke
	SGI IRIX 6.3).

1998-08-01  David Mosberger-Tang  <davidm@azstarnet.com>

	* include/sane/config.h.in (HAVE_SYS_SCSICMD_H, HAVE_SYS_DSREQ_H):
 	Undefine.

	* configure.in (AC_CHECK_HEADERS): Mention sys/scsicmd.h and
 	sys/dsreq.h.

	* sanei/sanei_scsi.c (SCO_OS55_INTERFACE, IRIX_INTERFACE,
 	SOLARIS_INTERFACE): Define.

1997-07-27  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/xscanimage.c (quit_xscan) [HAVE_LIBGIMP_GIMP_H]: When
	running as a GIMP extension, call gimp_quit().
	(init) [HAVE_LIBGIMP_GIMP_H]: Set GDK's xshm flag based on GIMP's
	flag.

	* doc/sane-mustek.man (SCSI ADAPTER TIPS): Try to make complete
	sentences.

1997-07-25  David Mosberger-Tang  <davidm@azstarnet.com>

	* Version 0.62 released.

	* configure.in (CPPFLAGS): Test for gtk_gamma_curve_new() to
	see whether appropriate version of gtk is installed.

	* backend/mustek.c (sane_init): Add parsing support for option
	`strip-height'.
	(strip_height): New variable to limit scan strip height.
	(reader_process): If strip_height is greater than 0.0, limit
	lines_per_buffer so that no more than strip_height inches are
	scanned with a single SCSI read command.

	* doc/sane-mustek.man (CONFIGURATION): Describe strip-height
	option.

1997-07-23  David Mosberger-Tang  <davidm@azstarnet.com>

	* doc/sane-hp.man (Model): Added ScanJet 3c info.

1997-07-22  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/scanimage.README: Remove file.

	* doc/sane-scsi.man: Add info on generic AM53C974 driver.

1997-07-19  David Mosberger-Tang  <davidm@azstarnet.com>

	* sanei/sanei_scsi.c [USE == LINUX_INTERFACE]: Include
	<sys/time.h>.

1997-07-18  David Mosberger-Tang  <davidm@azstarnet.com>

	* sanei/sanei_scsi.c (sanei_scsi_req_flush_all)
	[WE_HAVE_ASYNC_SCSI]: Implement stub.

	* scripts/xerox: New file (simple xeroxing script).

	* frontend/scanimage.c (main): When opening a device fails, also
	print reason for failure.

	* frontend/preview.c (preview_new): Register expose_event handler.
	(preview_destroy): Call scan_done() if called when preview
	scanning in progress.

	* backend/mustek.c (attach): Add argument MAY_WAIT.  If it's TRUE,
	wait for scanner to become ready before sending inquiry command.
	(do_cancel): Rename to do_stop.  Ignore child's exist status
	when we're really cancelling a scan.  Issue stop_scan() command
	only if the scan got cancelled and do a wait_ready() before
	issueing the stop_scan().
	(read_data): Delete.
	(sane_init): Call attach() with MAY_WAIT set to SANE_FALSE.
	(sane_open): Call attach() with MAY_WAIT set to SANE_TRUE.

	* frontend/preview.c (display_partial_image): Use gtk_preview_put()
	to update the preview window.  Much faster than hiding/showing the
	widget.
	(expose_handler): New function.

	* frontend/progress.c (progress_new): Make "Cancel" button a
	toggle-button so user can see when it was pressed down while
	the backend cancels its operation.

	* backend/mustek.c (do_cancel): Call wait_ready() before
	attempting to stop scanner.
	(read_req_enter): New function.
	(send_data): Ditto.
	(sigterm_handler): New function.
	(reader_process): Reimplement using asynchronous SCSI command
	interface.
	(wait_ready): Use gettimeofday() to implement timeout.  The
	scsi command itself may take a considerable amount of time
	(1 second or more) so we can't just loop for a fixed number
	of times.

	* include/sane/sanei_scsi.h: Declre sanei_scsi_req_enter,
	sanei_scsi_req_wait, and sanei_scsi_req_flush_all.

	* sanei/sanei_scsi.c [WE_HAVE_ASYNC_SCSI]: Define.
	(issue): New function.
	(sanei_scsi_req_flush_all): New function.
	(sanei_scsi_req_enter): Ditto.
	(sanei_scsi_req_wait): Ditto.
	(sanei_scsi_cmd): Reimplement in terms of enter/wait.
	(sanei_scsi_req_enter) [!WE_HAVE_ASYNC_SCSI]: Stub that
	simply calls sanei_scsi_cmd().
	(sanei_scsi_req_wait): Empty stub.

1997-07-16  David Mosberger-Tang  <davidm@azstarnet.com>

	* doc/sane-scsi.man: Add Tekram DC390 info (contributed by
	kawk@Home.Yo.COM (Kolja Waschk))

1997-07-15  David Mosberger-Tang  <davidm@azstarnet.com>

	* sanei/sanei_scsi.c (sanei_scsi_cmd) [USE==LINUX_INTERFACE]:
	Return SANE_STATUS_NO_MEM if write() of SCSI command fails.

	* backend/mustek.c (do_cancel): If reader_process exited, use
	exit status as return value.
	(reader_process): Return SANE_STATUS_IO_ERROR instead of 1.
	Return SANE_STATUS_NO_MEM instead of 2.  Return STATUS instead
	of 3.  Return SANE_STATUS_GOOD instead of 0.
	(sane_read): If do_cancel() returns anything but
	SANE_STATUS_CANCELLED or SANE_STATUS_GOOD, something bad has
	happened and the return status should be returned.

	* doc/sane-scsi.man: Fix typo: sg.h is in /usr/include/scsi, not
	/usr/include.

	* PROBLEMS: Add warning about updating Linux kernel after increasing
	SG_BIG_BUFF.

1997-07-14  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/xscanimage.c (quit_xscan): Destroy preview window before
	quitting, so preview image gets saved if necessary.

	* frontend/Makefile.in (LIBX11): New macro.
	(LIBGTK): Ditto.
	(xscanimage): Use $(LIBGTK) instead of $(LIBS).
	(xcam): Use $(LIBGTK) instead of $(LIBS).

	* configure.in (LIBX11): Define as all libraries necessary when
	using X11.
	(LIBGTK): Define as all libraries necessary when using GTK+.

	* backend/mustek.c (sane_start): Don't send gamma in lineart and
	halftone mode!

	* doc/sane-scsi.man: Add info on how to setup BT958 card (contributed
	by Jeremy <jeremy@xxedgexx.com>).

1997-07-13  David Mosberger-Tang  <davidm@azstarnet.com>

	* doc/sane-scsi.man: Add info on FreeBSD.

1997-07-12  David Mosberger-Tang  <davidm@azstarnet.com>

	* ltmain.sh: Installed libtool-1.0-nomode patch.

	* configure.in (AC_PROG_RANLIB): Change to AM_PROG_RANLIB.

1997-07-11  David Mosberger-Tang  <davidm@azstarnet.com>

	* ltmain.sh: Upgrade to libtool-1.0.
	* ltconfig: Ditto.
	* config.guess: Ditto.
	* config.sub: Ditto.
	* aclocal.m4: Ditto.

1997-07-08  David Mosberger-Tang  <davidm@azstarnet.com>

	* Version 0.61 released.

	* backend/Makefile.in (LIBLIB_FUNCS): Mention snprintf.

	* backend/umax-struct.h (LINEART, HALFTONE, GREYSCALE, RGB): Move
	the pound sign to the beginning of the line.
	* backend/umax-scsidef.h: Ditto for all indendent #defines in this
	file.
	* backend/umax-scsi.c: Ditto for all # directives in here.

	* frontend/saned.c [HAVE_LIBC_H]: Include <libc.h>.

1997-07,07  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/net.c [HAVE_LIBC_H]: Include <libc.h>.

	* lib/usleep.c: New file (adapted from glibc).

	* lib/strndup.c: Move #ifndef HAVE_STRNDUP up so nothing
	except <config.h> gets included unless really needed.
	Include <sys/types.h> to get size_t defined.

	* lib/snprintf.c (vsnprintf): Rename from vplp_snprintf.
	(snprintf): Rename from plp_snprintf.

	* include/sane/config.h.in: Add #undef HAVE_USLEEP.  Add #undef
	HAVE_IO_CAM_CAM_H.

	* configure.in: Test ${ac_cv_prog_gcc} instead of $CC to find out
	whether we're dealing with gcc.  Test for io/cam/cam.h header.
	(AC_C_INLINE): Add.
	(AC_CHECK_FUNCS): Mention usleep.
	Check for Xext after checking for X11 since on some platforms,
	linking against Xext requires functions from X11.

	* backend/umax.c (PATH_MAX): Define as 1024 if undefined.

	* backend/Makefile.in (CONFIGS): Don't add $(srcdir) prefix.
	(LIBLIB_FUNCS): Mention usleep.
	(install): Invoke $(LIBTOOL) $(MINST) --finish $(libdir) in
	a final step.  Correct installation rule for config files.

1997-07-06  David Mosberger-Tang  <davidm@azstarnet.com>

	* sanei/sanei_scsi.c (sanei_scsi_cmd): New variable RESULT.

1997-07-05  David Mosberger-Tang  <davidm@azstarnet.com>

	* sanei/sanei_scsi.c (sanei_scsi_cmd): Improve BSD version based
	on patch by Amancio Hasty <hasty@rah.star-gate.com>.
	(BSD_INTERFACE): Rename from NETBSD_INTERFACE (FreeBSD uses the
	same interface).

	* configure.in (CPPFLAGS): Check for scsireq_enter in libscsi.a.

	* doc/Makefile.in (SECT5): Mention sane-scsi.5.
	* doc/sane-scsi.man: New file.

	* doc/sane-umax.man: Add SEE ALSO section mentioning sane-scsi(5).
	* doc/sane-mustek.man: Ditto.

	* doc/scanimage.man: Mention sane-umax(5).
	* doc/xscanimage.man: Ditto.
	* doc/saned.man: Ditto.

	* configure.in (AC_TYPE_PID_T): Add.
	* include/sane/config.h.in: Add undef of pid_t.

1997-07-04  David Mosberger-Tang  <davidm@azstarnet.com>

	* lib/sigprocmask.c (sigprocmask): Use hardcoded values instead
	of SIG_BLOCK, SIG_UNBLOCK, and SIG_SETPROCMASK.

1997-07-03  David Mosberger-Tang  <davidm@azstarnet.com>

	* configure.in (CPPFLAGS): Remove -D_POSIX_SOURCE.  We can't define
	it safely since it causes select() related typedefs and defines
	to go away under FreeBSD, for example.

1997-07-02  David Mosberger-Tang  <davidm@azstarnet.com>

	* configure.in (CPPFLAGS): Put -D_GNU_SOURCE and -D_POSIX_SOURCE
	in CPPFLAGS, not CFLAGS.

	* doc/sane-umax.man: Change SG_BIG_BUFF example from 128KB to
	127.5KB.
	* doc/sane-mustek.man: Ditto.  Mention DTC3181E together with
	DTCT436.

	* frontend/gtkglue.c (gsg_create_dialog): Initialize dialog->advanced
	to TRUE so "dumb" frontends will show all options.

	* frontend/xscanimage.c (device_dialog): Turn off advanced options
	by default.

	* configure.in (AC_CHECK_TYPE): Check for u_long and u_int.
	Check for scsireq_t.
	* sanei/sanei_scsi.c: Don't define scsireq_t here.

	* include/sane/config.h.in: Add undef of u_long, u_int, and
	scsireq_t.

1997-07-01  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/xscanimage.c (quit_xscan): No longer call
	preview_destroy() since that now gets called as part of
	the "destroy" callback.

	* backend/hp.c (attach) [PREFER_DEVICEPIXEL]: Use device-pixel
	unit commands instead of decipoint commands so things work on a 5p
	as well (contributed by NOGAYA Shigeki
	<nogaya@mbox.kyoto-inet.or.jp>).
	(sane_start) [PREFER_DEVICEPIXEL]: Convert from mm to pixels.

	* frontend/preview.c (input_available): Break out of per-bit loop
	when done with one line (fix contributed by NOGAYA Shigeki
	<nogaya@mbox.kyoto-inet.or.jp>).
	* frontend/xscanimage.c (input_available): Ditto.

	* doc/sane-umax.man: Rename SCSI id to Product id to reduce
	confusion.
	* doc/sane-hp.man: Ditto.
	* doc/sane-mustek.man: Ditto.

	* backend/mustek.c (wait_ready): Ignore errors during wait_ready().
	With 3-pass scanners, ncr810 driver returns EIO while the scanner
	is getting ready for pass 2 or 3.

1997-06-30  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/mustek.c (seose_handler): Print debug info if we
	find unknown sense result.

	* sanei/sanei_scsi.c (sanei_scsi_cmd): Consider sense_buffer[]
	only when result != 0.

	* frontend/scanimage.c (sighandler): Change return value type
	from void to RETSIGTYPE (from <sane/config.h>).

	* doc/sane-mustek.man: Mention problems with MSFS-12000SP.

	* backend/umax.c (sane_start): Don't use C++ style line comments.

	* backend/umax-scsi.c (umax_do_scsi_cmd): Use sigemptyset() to clear
	out signal set.  Include <sane/config.h>.

	* frontend/saned.c [HAVE_SYS_SELECT_H]: Include <sys/select.h>.
	* include/sane/config.h.in: Mention HAVE_SYS_SELECT_H.

Thu Jun 26 10:19:50 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* README: Mention permissions on generic SCSI device.

Tue Jun 24 17:35:52 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* doc/xscanimage.man: Fix spacing.

	* doc/sane-dll.man: Mention how list of pre-loaded backends
	can be changed.

Sun Jun 22 08:29:47 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* PROBLEMS: Add note on SCSI device names under OpenStep.

	* sanei/sanei_scsi.c (sanei_scsi_cmd): Fix various minor bugs.
	(sanei_scsi_open): Add support for OpenStep.

	* backend/Makefile.in (install): Replace 'ln -f -s' with `rm -f',
 	`ln -s' sequence.  OpenStep doesn't support the -f option at all.

Fri Jun 20 07:30:18 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* doc/sane-qcam.man: Updated B&W status.

	* sanei/sanei_save_values.c [HAVE_LIBC_H]: Include <libc.h>.
	* sanei/sanei_load_values.c: Ditto.

	* lib/sigprocmask.c: New file.
	* lib/strdup.c: Ditto.

	* lib/Makefile.in (LIBLIB_OBJS): Mention strdup.o and sigprocmask.o.
	(LIBLIB_LTOBJS):  Mention strdup.lo and sigprocmask.lo.
	(liblib.a): Use $(RANLIB) instead of -ranlib.

	* include/sane/sanei_backend.h [!HAVE_SIGPROCMASK]: Define
 	compatibility macros sigset_t, sigemptyset(), sigfillset(),
	sigaddset(), sigdelset(), and sigaction().
	Define macro SIGACTION.

	* frontend/saned.c (HAVE_VARARG_MACROS): Don't define unless we
	have at least gcc 2.6.
	* include/sane/sanei_debug.h Ditto.  Use HAVE_VARARG_MACROS
	instead of __GNUC__.
	* sanei/sanei_init_debug.c: Ditto.

	* configure.in (AC_PROG_RANLIB): Mention.
	(CFLAGS): Move up near the beginning and add -D_POSIX_SOURCE.
	(AC_CHECK_HEADERS): Test for libc.h.
	(AC_TYPE_SIGNAL): Mention.
	(AC_CHECK_FUNCS): Check for sigprocmask.

	* backend/net.c (sane_init): Honor SANE_NET_HOSTS even if
	net.conf does not exist.

	* backend/mustek.c (sane_start): Use "struct SIGACTION" so it's
	easier to make code work on platforms that don't support
	sigprocmask().
	* backend/umax.c (sane_start): Ditto.

	* ltmain.sh: Upgrade to libtool-0.9h.
	* ltconfig: Ditto.
	* config.guess: Ditto.
	* config.sub: Ditto.
	* aclocal.m4: Ditto.

Thu Jun 19 08:26:33 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* configure.in (V_MINOR): Update forgotten version number...

	* backend/qcam.c (reader_process): Scale 4 and 6 bpp to 8 bpp.

	* backend/mustek.h (MUSTEK_FLAG_LD_NONE): New flag.
	* backend/mustek.c (attach): Turn on MUSTEK_FLAG_LD_NONE for
	MSF-06000SP (this fixes the problems for Andreas Gaumann
 	<gg261@appl2.hrz.uni-siegen.de>).
	(attach): Print debug message when MUSTEK_FLAG_LD_NONE is on.
	(line_distance): Fix up ld correction only if MUSTEK_FLAG_LD_NONE
	is not on.

Wed Jun 18 15:42:25 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* doc/sane.tex (section{Image Data Format}}): Clarify
	what valid bit-depths are.
	
Tue Jun 17 07:47:51 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/qcam.c (sane_get_parameters): Test for != QC_COLOR
	instead of == QC_MONO.  Apparently, there are several versions
	of the monochrome camera.
	(qc_setscanmode): Ditto.

	* lib/snprintf.c: Update with latest version (also includes
	license information now).

	* sane-0.6.lsm (Author): Update Tristan Tarrant's email address.
	* AUTHORS: Ditto.
	* frontend/xscanimage.c: Ditto.

Sun Jun 15 10:08:44 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* doc/xscanimage.man: Add section on how to run xscanimage under
 	the GIMP.

	* frontend/xscanimage.c (init) [HAVE_LIBGIMP_GIMP_H]: Call
 	gtk_rc_parse() with gimp_gtk_rc() to get space-saving layout of
 	The GIMP. (Suggested by Sven Neumann.)

	* sanei/sanei_scsi.c (sanei_scsi_cmd): Add NeXTStep/OpenStep
 	implementation.
	(sanei_scsi_cmd): Adjust NetBSD version to make it more like
	NeXTStep/OpenStep version.

	* configure.in (AC_CHECK_HEADERS): Mention bsd/dev/scsireg.h.

Thu Jun 19 15:19:38 1997  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>

	* backend/umax-scsi.c: Parameterize slightly more so that the
 	build succeeds on non-Linux platforms.

	* Makefile.in, backend/Makefile.in, doc/Makefile.in,
 	frontend/Makefile.in (install): Fail immediately if any
 	installation fails.  Use mkinstalldirs to create all installation
 	directories.

Sat Jun 14 11:07:13 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* Version 0.6 released.

	* frontend/preview.c (preview_new): Connect "destroy" signal
	so we notice if window manager closes our window.
	(top_destroyed): New function.

	* frontend/xscanimage.c (scan_preview): Make it robust against
 	preview_new() returning NULL and connect "destroy" signal so we
 	notice when the window manager closes the preview window.
	(preview_window_destroyed): New function.

	* LICENSE: New file.

	* backend/dll.c: Change license from GPL to relaxed GPL.
	* backend/hp.c: Ditto.
	* backend/hp.h: Ditto.
	* backend/mustek.c: Ditto.
	* backend/mustek.h: Ditto.
	* backend/net.c: Ditto.
	* backend/net.h: Ditto.
	* backend/pint.c: Ditto.
	* backend/pint.h: Ditto.
	* backend/pnm.c: Ditto.
	* backend/pnm.h: Ditto.
	* backend/qcam.c: Ditto.
	* backend/qcam.h: Ditto.
	* sanei/sanei_codec_ascii.c: Ditto.
	* sanei/sanei_codec_bin.c: Ditto.
	* sanei/sanei_constrain_value.c: Ditto.
	* sanei/sanei_init_debug.c: Ditto.
	* sanei/sanei_load_values.c: Ditto.
	* sanei/sanei_net.c: Ditto.
	* sanei/sanei_save_valus.c: Ditto.
	* sanei/sanei_scsi.c: Ditto.
	* sanei/sanei_wire.c: Ditto.

Fri Jun 13 18:35:47 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* lib/snprintf.c: New file (Patrick Powell).

	* frontend/xcam.c: Use guint32 and guint32 instead of u_int16_t
 	and u_int32_t (Tristan Tarrant).

	* doc/Makefile.in (SECT5): Mention sane-umax.5.

	* configure.in (PACKAGE_VERSION): Check for snprintf (Tristan
 	Tarrant).

	* backend/dll.conf: Mention umax.

	* backend/umax-scanner.h: New file (from umax-0.5.5).
	* backend/umax-scsi.c: Ditto.
	* backend/umax-scsidef.h: Ditto.
	* backend/umax-struct.h: Ditto.
	* backend/umax-uc630.h: Ditto.
	* backend/umax-ug630.h: Ditto.
	* backend/umax-umax.c: Ditto.
	* backend/umax.conf: Ditto.
	* backend/umax.h: Ditto.
	* doc/sane-umax.5: Ditto.

	* backend/Makefile.in (PRELOADABLE_BACKENDS): Mention umax.
	(libsane-umax.la): List dependencies for umax library.

	* COPYING: New file.

	* include/sane/config.h.in: Add #undef HAVE_SNPRINTF.

Tue Jun 10 21:00:34 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* ltmain.sh: Upgrade to libtool-0.9g.

Sun Jun  8 21:24:27 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/dll.c (load): Also check SHLIB_PATH (HP-UX) and LIBPATH
 	(AIX).

	* include/sane/config.h.in: Remove HAVE_GTK_GTKCURVE_H.

Sat Jun  7 11:19:57 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/xscanimage.c (pref_device_save): Call gsg_sync() before
	saving the values.

	* backend/Makefile.in (libsane-%.la): Add -export-dynamic flag.

	* frontend/xscanimage.c (query): Rename "/Extensions/" to "/Xtns/"
 	to reflect gimp-0.99.10 changes.
	(query): Don't put in separator---it confuses gimp.
	(main): Temporarily install a null print handler so gimp_main()
 	doesn't produce any ugly messages when program gets invoked in
 	stand-alone mode.

	* ltconfig: Upgrade libtool to version 0.9f.
	* ltmain.sh: Ditto.
	* config.guess: Ditto.
	* config.sub: Ditto.

	* frontend/Makefile.in (install): Define MKDIR as
	$(top_srcdir)/mkinstallldirs.
	Use $(MKDIR) instead of mkdir.
	* backend/Makefile.in (install): Ditto.
	* doc/Makefile.in (install): Ditto.

	* mkinstalldirs: New file (from maint-0.1g).

Tue Jun  3 10:29:17 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* LEVEL2: New file.

Sun Jun  1 13:26:40 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* doc/Makefile.in (LATEX, DLH): New macros.
	(sane.ind): Prefix source filename with $(srcdir).
	(ps): Ditto.
	(html): Ditto.

	* doc/net.tex (subsection{SANE_NET_START}): Document member
	byte_order.

	* sanei/sanei_net.c (sanei_w_start_reply): (De-)code BYTE_ORDER
 	member.

	* frontend/saned.c (byte_order): New union.
	(process_request): Initialize byte_order member.

	* include/sane/sanei_net.h (SANE_Net_Byte_Order): New enum type.
	(SANE_Start_Reply): New member BYTE_ORDER.

Wed May 28 17:13:43 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* doc/Makefile.in (install): Create $(mandir)/man1 and
 	$(mandir)/man5 if necessary.

Tue May 27 09:31:39 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/hp.c: Remove s7_range and s1_range.
	(attach): Add inquiry of min/max brightness/contrast and fill in
 	dev->brightness_range and dev->contrast_range accordingly.
	(init_options): Use s->hw->brightness_range instead of s7_range.
  	Use s->hw->contrast_range instead of s7_range.  Disable contrast
 	option if min value is same as max value.

	* backend/hp.h (struct HP_Device): Add members BRIGHTNESS_RANGE
 	and CONTRAST_RANGE.

	* sanei/sanei_scsi.c (sanei_scsi_open): Add more debug info.

Mon May 26 10:43:51 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* sanei/Makefile.in: Add definitions for VPATH, srcdir, top_srcdir,
 	and top_builddir.
	(INCLUDES): Move -I directives from CPPFLAGS to this macro.  Also
 	search in $(srcdir), $(top_builddir)/include, and
	$(top_srcdir)/include.

	* lib/Makefile.in: Add definitions for VPATH, srcdir, top_srcdir,
 	and top_builddir.
	(INCLUDES): Move -I directives from CPPFLAGS to this macro.  Also
 	search in $(srcdir), $(top_builddir)/include, and
	$(top_srcdir)/include.

	* include/Makefile.in: New file.

	* frontend/Makefile.in: Add definitions for VPATH, srcdir, top_srcdir,
 	and top_builddir.
	(INCLUDES): Also search in $(srcdir), $(top_builddir)/include, and
	$(top_srcdir)/include.
	(install): Add $(srcdir) prefix to sane-style.rc.

	* doc/Makefile.in: Add definitions for VPATH, srcdir, top_srcdir,
 	and top_builddir.
	(%.1 %.5): Use $^ instead of $* so source file can be found even
	when in a different directory.

	* configure.in (AC_OUTPUT): Create (dummy) include/Makefile to
	ensure include directory exists in build tree.

	* backend/Makefile.in: Add definitions for VPATH, srcdir,
 	top_srcdir, and top_builddir.
	(INCLUDES): Also search in $(srcdir), $(top_builddir)/include, and
	$(top_srcdir)/include.
	(CONFIGS): Add $(srcdir) prefix.
	(%-s.c): Ditto.

	* Makefile.in (INSTALLED_INCLUDES): Mention include/sane/config.h.
	Add definitions for VPATH, srcdir, top_srcdir, and top_builddir.
	(INSTALLED_INCLUDES): Change include/sane to $(top_srcdir)/include/sane
	and use "addprefix" function to add prefix.

Thu May 15 07:26:06 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* doc/sane-mustek.man (Model): Add entry for MFC-600CD.
	(Model): Mention AHA-2940.

	* frontend/xscanimage.c (scan_dialog): Move gsg_sync() to here
 	(from scan_start()).

	* backend/mustek.c (init_options): Disable brightness/contrast for
 	1-pass scanners only (in color mode).

Wed May 14 09:17:02 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/mustek.c: Add ax_brightness_range, ax_contrast_range.
	(init_options): Use ax_brightness_range/ax_contrast_range for
	brightness/contrast option when using a 3-pass scanner.
	(encode_percentage): Remove extraneous division by 100.0.

	* doc/sane-mustek.man (Model): Add MFS-12000CX entry.

Mon May 12 07:58:34 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/scanimage.c (main): Shorten help string so it fits in
 	80 characters.

	* frontend/preview.c (paint_image): Only increment height if
 	height < p->image_height.

Sat May 10 14:43:05 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* Version 0.57 released.

	* backend/mustek.c (attach): Fix range to 220x300mm.
	(init_options): Initialize OPT_PREVIEW and OPT_GRAY_PREVIEW.
	(sane_control_option): Handle OPT_PREVIEW and OPT_GRAY_PREVIEW.
  	Do not allow OPT_NUM_OPTS to be set.
	(sane_get_parameters): Except for s->params.format and
 	s->params.last_frame, do not change any parameters when scanning
	is in progress.
	(sane_start): Handle mono-chrome previewing.

	* backend/mustek.h (Mustek_Option): Add OPT_PREVIEW and
 	OPT_GRAY_PREVIEW.

	* frontend/progress.c (progress_new): Fix position of progress bar
 	window to (progress_x,progress_y).

	* frontend/gtkglue.c (panel_build): Skip Preview option.

Thu May  8 19:39:48 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* doc/scanimage.man: New file.

	* doc/Makefile.in (SECT1): Mention scanimage.1.

	* backend/dll.conf: Add hp to dll.conf.

Wed May  7 07:28:18 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* include/sane/sanei_scsi.h (SANEI_SCSI_Sense_Handler): New type.
	(sanei_scsi_close): Add SENSE_HANDLER argument (NULL means no
 	special handler needed).

	* backend/hp.c (sane_start): Pass 0 as SENSE_HANDLER argument.
	(attach): Ditto.

	* backend/mustek.c (sense_handler): Rename from request_sense and
	simplify.
	Remove all explicit request-sense calls.

	* sanei/sanei_scsi.c: Include <stdlib.h>.
	(num_handlers_alloced): New variable.
	(sense_handler): Ditto.
	(sanei_scsi_open): Add SENSE_HANDLER argument.  Stash it away in
 	SENSE_HANDLER array if non-NULL.
	(sanei_scsi_cmd) [HAVE_SYS_SG]: Invoke SENSE_HANDLER[FD] if it
 	exists and is non-NULL and we have a valid sense-buffer.
	(sanei_scsi_cmd) [HAVE_SYS_SCSI]: Ditto.
	(sanei_scsi_close): Reset SENSE_HANDLER[FD] to NULL if it exists.

	* frontend/xcam.c: Include <sane/config.h>.

	* configure.in: Add a big fat warning that PROBLEMS should be
	read before running any programs.

	* PROBLEMS: Add info on how to avoid damaging Mustek scanners.

Mon May  5 07:06:54 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* doc/sane.tex (chapter{Contact Information}): Fix URL.

	* doc/net.tex: Add missing sections.  Make into chapter.

	* backend/pint.README: Remove.

	* backend/dll.c (ASSERT_SPACE): Call malloc() when devlist is
 	NULL.  SunOS realloc() returns NULL otherwise.
	* backend/net.c (ASSERT_SPACE): Ditto.

Sun May  4 09:21:48 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/saned.c (EXIT_SUCCESS): Define as 0 if not defined by
 	stdlib.h.

	* frontend/scanimage.c: Include <sys/types.h>.

	* backend/qcam.c: Define PATH_MAX as 1024 if limits.h doesn't
 	define it.
	* backend/dll.c: Ditto.
	* backend/hp.c: Ditto.
	* backend/mustek.c: Ditto.
	* backend/net.c: Ditto.
	* backend/pint.c: Ditto.
	* backend/qcam.c: Ditto.
	* frontend/xscanimage.c: Ditto.
	* frontend/xcam.c: Ditto.
	* frontend/preview.c: Ditto.

	* sanei/sanei_wire.c: Include <sane/config.h>.
	* sanei/sanei_net.c: Ditto.
	* sanei/sanei_codec_ascii.c: Ditto.
	* sanei/sanei_codec_bin.c: Ditto.
	* sanei/sanei_save_values.c: Ditto.
	* backend/net.c: Ditto.
	* frontend/saned.c: Ditto.

	* configure.in (AC_CHECK_HEADERS): Mention
 	/usr/src/linux/include/scsi/sg.h.

	* include/sane/config.h.in: Add
 	#undef HAVE__USR_SRC_LINUX_INCLUDE_SCSI_SG_H.

	* sanei/sanei_scsi.c [HAVE__USR_SRC_LINUX_INCLUDE_SCSI_SG_H]:
 	Include "/usr/src/linux/include/scsi/sg.
	(sanei_scsi_cmd): Use Linux version if either HAVE_SCSI_SG_H or
	HAVE__USR_SRC_LINUX_INCLUDE_SCSI_SG_H are defined.

	* doc/xscanimage.man: Rename --no-shm to --no-xshm.

Mon Apr 28 09:55:02 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* Version 0.56 released.

	* backend/qcam.c (sane_open): Move disabling of despeckle-filter
	for b&w cameras to here (from init_options()).

	* frontend/preferences.c: Add missing default value for FILENAME.

	* backend/qcam.h: Add QC_BW_SET_CONTRAST,
 	QC_BW_AUTO_ADJUST_OFFSET, and QC_BW_GET_OFFSET.  * backend/qcam.c
 	(sane_start): Use QC_BW_SET_CONTRAST when dealing with B&W camera.
  	Fix computation of QC_SET_NUM_H value.  [Based on Guido Muensch's
 	patches.]

	* frontend/scanimage.c (advance): Move out-of-memory error message
 	from scan_it() to here.
	(scan_it): When height is known a priori, allocate one extra line
 	to avoid realloc() when image has been filled.

	* backend/hp.c (BACKEND_NAME): Define as hp (reported by Henryk
 	Paluch).

	* backend/mustek.c (request_sense): Increase result size from 4 to
 	16 bytes to shut up aha1542 driver (reported by Mathias Lautner).

	* frontend/scanimage.c (advance): Fix memory allocation logic
	(bug reported by Matthias Lautner).

	* doc/sane-dll.man: Clarify that pre-loaded backends are not
 	affected by dll.conf.

	* doc/sane-pint.man: New file (contributed by Gordon Matzigkeit).

	* backend/dll.c (RTLD_NOW): Define as 0 if dlfcn.h doesn't define
 	it.

Wed Apr 23 23:03:47 1997  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>

	* backend/Makefile.in, frontend/Makefile.in: Specify full
 	filenames, rather than just the directory name for INSTALL
 	destinations.  This Automakeism helps debugging when the target
 	directory doesn't exist.

	* include/sane/config.h.in (HAVE_SYS_SCANIO_H): Define, for PINT's
	sake.

	* backend/pint.c: Prefix sane includes with <sane/...>.

	* backend/dll.c (RTLD_NOW): Paramaterize, so that RTLD_LAZY is
	used if RTLD_NOW is not defined.
	(load): Try looking up the symbol with a leading underscore, if we
 	can't find it the first time.

	Make dynamic loading conditional on HAVE_DLOPEN rather than the
 	library and header file.

	* configure.in (enable_dynamic): Disable dynamic loading if the
	system doesn't have dlopen.

Tue Apr 22 00:17:41 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* Version 0.55 released.

	* frontend/xscanimage.c (browse_filename_callback): Initialize
	FILENAME before calling gsg_get_filename().

	* doc/sane.tex: Change obsolete \driver{DVIps} into DVIps document
 	style option.

	* frontend/xscanimage.c (query): Update to new command name
 	length.

Mon Apr 21 08:27:28 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* doc/Makefile.in (install): Add rule to install man-pages.
	(%.1 %.5): Add rule to generate man-pages (by substituting
	actual paths).
	(SECT1): New variable.
	(SECT5): Ditto.
	(MANPAGES): Ditto.

	* doc/sane-pnm.man: New file.
	* backend/pnm.README: Deleted.

	* doc/sane-hp.man: New file.
	* backend/hp.README: Deleted.

	* doc/saned.man: New file.
	* frontend/saned.README: Deleted.

	* doc/sane-qcam.man: New file.
	* backend/qcam.README: Deleted.

	* doc/sane-mustek.man: New file.
	* backend/mustek.README: Deleted.

	* doc/sane-net.man: New file.
	* backend/net.README: Deleted.

	* doc/sane-dll.man: New file.
	* backend/dll.README: Deleted.

	* doc/xscanimage.man: New file.
	* frontend/xscanimage.README: Deleted.

	* frontend/preview.c (event_handler): Restore preview image only
	if preferences.preserve_preview is TRUE.

	* frontend/xscanimage.c (preview_options_dialog): Add an option
	to control whether the preview image should be preserved.

	* sanei/sanei_load_values.c (sanei_load_values): Copy string value
	into temporary buffer that is opt->size bytes long.  Then pass copy
	to sane_control_option().

	* AUTHORS (Backends): Updated according to recent changes.

	* doc/sane.tex (The SANE Application Programmer Interface (API)):
 	Fix typo: replace () by {}.

	* PROJECTS (Backend): Update PINT entry.

	* frontend/xscanimage.c (prog_name): New variable.
	(input_available): Use prog_name instead of hardcoding "xscan".
	(preview_options_ok_callback): Ditto.
	(preview_options_dialog): Ditto.
	(usage): Ditto.
	(interface): Ditto.
	(main): Initialize prog_name.

	* frontend/scanimage.c: Update for new name (scanimage instead of
 	scan).

	* frontend/Makefile.in (SCAN_OBJS): Rename sources to xscanimage.c
 	and scanimage.c as well.

Sun Apr 20 09:09:06 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* Version 0.54 released.

	* sanei/Makefile.in (LIBSANEI_LTOBJS): Remove @LTALLOCA@.
	(LIBSANEI_OBJS): Remove @ALLOCA@.

	* lib/Makefile.in: Invoke $(LIBTOOL) with --mode arg to avoid
 	depending on command names.  Prefix $(LIBTOOL) invocation with
	@-sign to reduce verbosity.
	* frontend/Makefile.in: Ditto.
	* backend/Makefile.in: Ditto.
	* sanei/Makefile.in: Ditto.
	
	* frontend/saned.c (_PATH_HEQUIV): Define if not defined yet..

	* configure.in: Check for libgimp/gimp.h instead of -lgimp since
	-lgimp cannot be linked by itself (it has an unresolved reference
	to PLUG_IN_INFO).

	* lib/strndup.c (strndup): Include <stdlib.h>.

	* frontend/xscanimage.README: Update.

	* sanei/sanei_scsi.c: Add missing "int" type in front of
 	sanei_scsi_max_request_size.

	* configure.in: Check for -lintl, -lsocket, and -lnsl for
 	braindamaged SVR4 systems.

	* frontend/scan.c (scan_it): Initialize min with 0xff, not ~0
	(Sun CC complains otherwise).

	* backend/Makefile.in: Use "ln -f -s", not "ln -sf", Solaris doesn't
	like the former.  Grrr...

	* lib/alloca.c: Don't use xmalloc().

	* frontend/saned.c (store_reclen): Declare BUF as a pointer to
 	SANE_Byte (not char).
	(do_scan): Ditto.

	* frontend/scan.c (fetch_options): Cast opt->name to (char *)
	to suppress (spurious) warning.

	* backend/dll.c (sane_init): Skip preloaded backends with no name.

	* backend/hp.c (inquire): Cast BUF to (char *) to avoid warning.
	(sane_read): Change type of NREAD to size_t (from ssize_t).

	* include/sane/sanei_backend.h (u_int16_t): Define u_int8_t,
 	u_int16_t, and u_int32_t if necessary.

	* include/sane/sane.h (sane_strstatus): Remove non-ANSI "const".
	* backend/sane_strstatus.c (sane_strstatus): Ditto

	* include/sane/sanei_debug.h (DBG): Define alternate version for
	non-GNU C compilers.

	* sanei/sanei_init_debug.c (sanei_debug) [!__GNUC__]: New function.
	(max_level) [!__GNUC__]: New variable.

	* include/sane/sanei_wire.h: Fix typo in prototype for
 	sanei_w_value_type.

	* configure.in: Test for gtk_check_button_new() in libgtk.

	* lib/Makefile.in (CPPFLAGS): Add -I../include/sane.

	* frontend/scan.c (STRIP_HEIGHT): New macro.
	(advance): Use above macro instead of hard-coding value.
	(scan_it): Ditto.
	(scan_it): Print error when out of memory.

	* frontend/sane-style.rc: Make the curve in the graph red.

	* frontend/preview.c (XSERVER_WITH_BUGGY_VISUALS): Define for now.
	(preview_new): Avoid push_visual()/get_visual() since it seems to
 	cause problems with some XFree86 servers (and may be others as
 	well).

	* frontend/preferences.h: Add member ADVANCED.
	* frontend/preferences.c: Initialize member ADVANCED and add
	an option descriptor for it.

	* frontend/gtkglue.c (panel_build): Layout panel different: all
 	options are now in one column (advanced options are at the
 	bottom).  The graph widget (if any), will be shown in a separate
 	column to the right of the options.  Display a group only when
 	there is at least one option in it.  Create graph widget if there
 	is at least one vector-valued option.
	(gsg_sync): New function.
	(gsg_set_advanced): Ditto.
	(gsg_message_dialog_active): Rename from SHOWING_MESSAGE and make
	global.

	* frontend/gtkglue.h (GSGDialog): Rename member NOTEBOOK to
 	MAIN_HBOX.  Add members ADVANCED_VBOX and ADVANCED.

	* frontend/gtkglue.c (group_new): New function.
	(curve_new): Ditto.
	(vector_new): Ditto.

	* backend/mustek.c (init_options): Initialize OPT_CUSTOM_GAMMA.
	(sane_control_option): Handle OPT_CUSTOM_GAMMA.

	* backend/mustek.h (OPT_CUSTOM_GAMMA): New option.

	* configure.in (AC_CONFIG_HEADER): Update for new location.

	* include/sane/config.h.in: Move to here from include/config.h.
	* *.[ch]: Replace <config.h> with <sane/config.h> (except for
	files in lib.

	* frontend/saned.README: saned moved from bin/saned to sbin/saned.

	* configure.in (AC_CHECK_HEADERS): Check for gtk/gtkcurve.h.

	* backend/mustek.c (init_options): Undo changes of April 18th.

	* frontend/Makefile.in (install): Install $(BINPROGS) in $(bindir)
 	and $(SBINPROGS) in $(sbindir).
	(SBINPROGS): New variable.
	(BINPROGS): Ditto.
	(PROGRAMS): Define as concatenation of the two vars above.
	(install): Create $(bindir) and $(sbindir) if necessary.

Sat Apr 19 18:21:02 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/Makefile.in (scanimage): Rename "scan" binary to
 	"scanimage" to avoid name-collision with MH's scan command.

	* backend/mustek.c (gamma_correction): Update according to new
	gamma-table handling.

	* backend/mustek.h: Declare gamma_table as 4 arrays of 256 words
	each.

	* backend/mustek.c (sane_control_option): Add missing return after
	setting OPT_GAMMA_VECTOR.

	* frontend/progress.h: Protect against multiple inclusion using
 	macro progress_h, not __PROGRESS_H__ (names starting with
 	underscores are reserved for libc/system).

	* frontend/gtkglue.c: Remove include of <gtk.h>.
	* frontend/xcam.c: Ditto.
	* frontend/xscan.c: Ditto.

	* frontend/gtkglue.h: Include <gtk/gtk.h> instead of <gtk.h>.
	* frontend/progress.c: Ditto.

	* Makefile.in (install): Install headerfiles.
	(INSTALLED_INCLUDES): List of header files that need to be
 	installed.

Sat Apr 19 18:15:03 1997  Michael K. Johnson <johnsonm@redhat.com>

	* */*.[ch]: Prefix sane-includes with <sane/...>.
	include/sane*: Move to include/sane subdirectory.

Sat Apr 19 08:25:36 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/gtkglue.c (set_option): Add missing return and use
	snprintf instead of sprintf.

	* frontend/xscan.c (update_param): Multiply size by 3 if we're
	dealing with a frame from a 3-pass image.

Fri Apr 18 07:28:46 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/mustek.c (init_options): Mark all vector options as
	SANE_CAP_ADVANCED.

	* frontend/scan.c (scan_it): Fail if advance() fails.

Thu Apr 17 08:59:00 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/mustek.c (sane_read): Add debug statement.
	(reader_process): Remove extraneous if-statement that had the
 	effect of not passing along any data in 3-pass mode.

Wed Apr 16 09:16:01 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/preview.h: Add member CANCEL.
	* frontend/preview.c (scan_start): Make p->cancel sensitive.
	(scan_done): Make p->cancel insensitive.
	(preview_new): Set p->cancel insensitive.

	* frontend/preferences.h (Preferences): Add member "filename".
	* frontend/preferences.c: Initialize new member "filename".
	Declare member "filename" as a string.

	* frontend/xscan.c (device_dialog): Rename "Files" to "File".
	(quit_xscan): Call pref_xscan_save() before exiting.  Replace
	global variable filename by preferences.filename.

	* frontend/xcam.c (main): Ditto.

	* PROBLEMS: New file.

	* frontend/gtkglue.c (scale_new): Set the adjustment page size to
 	0.0.  Make horizontal scale 200 pixels wide.

	* frontend/xscan.c (device_dialog): Move gtk_widget_show
 	(ScanWin.shell) after pref_device_restore (0, 0).
	(pref_device_restore): Make arg-less since callback arguments must
 	not be used.
	(device_dialog): Remove dummy args from call to pref_device_restore().

	* include/saneopts.h (SANE_TITLE_SCAN_TL_X, SANE_TITLE_SCAN_TL_Y,
 	SANE_TITLE_SCAN_BR_X, SANE_TITLE_SCAN_BR_Y): Shorten titles.

	* frontend/xcam.c (main): Move gtk_widget_show(win.shell) to end
	of function.

	* backend/mustek.c (attach): Turn on MUSTEK_FLAG_USE_EIGHTS for
 	MFS-12000CX.
	(sane_get_parameters): Must not depend on s->mode in this routine,
	since s->mode is valid only once scanning has begun.

Tue Apr 15 23:06:17 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/mustek.c (sane_start): Issue SCAN_AREA and BACKTRACK
 	commands even during second and third pass.
	(sane_get_parameters): Be sure to properly update the
 	params.format member during second and third pass.

Sat Apr 12 11:40:52 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/scan.c (STRIP_HEIGHT): New macro.
	(scan_it): Fix typo: test parm.lines instead of image.height.

	* backend/pnm.c (hand_scanner): New variable.
	(sane_control_option): Handle setting/reading of HAND_SCANNER
 	option.
	(getparmfromfile): Set parms.lines to -1 when simulating
 	hand-scanner.
	(sod): Add hand-scanner option descriptor.

	* frontend/gtkglue.c (panel_build): Move gtk_widget_show
 	(notebook) to the very of this function.  This works around the
 	notebook redrawing problems.  Define WORKING_NOTEBOOK.

	* frontend/xscan.c (interface): Call quit_xscan() if
 	device_dialog() did not end up with a non-NULL dialog.
	(quit_xscan): Add missing exit() call.

	* backend/mustek.c (attach): Print more debug info on detected
 	scanner (1 vs 3-pass, ADF & TA support).
	(start_scan): Fix typo in code selecting the three-pass color filter.

Sun Apr 13 23:53:02 1997  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>

	* backend/pint.c, backend/pint.h, backend/pint.README: Added to
 	distribution.

Fri Apr 11 22:04:17 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* Version 0.53 released.

	* frontend/xscan.c: Default to "out.pnm" instead of "out.ppm".

	* backend/mustek.c (get_image_status): Add debug message.
	(sane_start): Only divide pixels_per_line by three if we're doing
 	a one-pass color scan.
	(do_eof): New function.
	(sane_read): Call do_eof() when done with a frame.
	(do_cancel): Call do_eof().

	* frontend/scan.c (write_pnm_header): New function.
	(advance): Ditto.
	(scan_it): Modify to support three-pass scanning and scanning of
 	images whose height is not known a priori (hand-held scanners).

Wed Apr  9 14:39:59 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/xscan.c (ok_choose_dialog_callback): Make
 	argument-free.
	(select_device_callback): Declare event as second argument and
 	call ok_choose_dialog_callback() if the callback was invoked
 	through a double-click.
	(choose_device): Register select_device_callback() as
 	"button_press_event" handler instead of as "clicked" so we can
 	catch double-clicks.

Tue Apr  8 10:31:47 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/xscan.c (init): Enable gtk_rc_parse() code (GTK-0.99.7
 	requires patch for gtkstyle.c).

	* backend/hp.c (attach): Fix parenthization to shut up gcc.

Mon Apr  7 13:08:45 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/xscan.c (preview_options_dialog): Rename "changed_text"
	to "changed" to reflect latest GTK version.
	(device_dialog): Ditto.
	* frontend/gtkglue.c (text_entry_new): Ditto.

	* Version 0.52 released.

	* AUTHORS: Various updates.

	* backend/mustek.README: Add Adaptec info.

	* backend/mustek.c (sane_start): Call wait_ready() before any
	other scanner command.
	(wait_ready): New function.
	(attach): Call wait_ready() instead of open-coding it.

	* doc/sane.tex (subsection{\code{sane\_strstatus}}): Include
 	net.tex.
	* doc/net.tex: New file.

Thu Apr  3 08:51:13 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/xscan.c (update_param): Change type of SIZE to u_long
 	(from long) since under NetBSD there seem to be some odd sign
 	problems otherwise (compiler bug?).

Wed Apr  2 07:15:41 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/mustek.c (sane_read): Always deliver EOF after reading
	0 bytes.

	* backend/qcam.c (reader_process): Fine-tune pixel interpolation.
	(despeckle32): Ignore last red pixel in every line (it's always
 	black).  Switch red and blue pixel location (the Connectix docs
 	are wrong).

	* backend/mustek.c (start_scan): Fix typo that caused start[4] to
	be set incorrectly.

	* frontend/preview.c: Include <sys/param.h> to get PATH_MAX.

Tue Apr  1 18:45:14 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/qcam.c (despeckle): New function.
	(despeckle32): Ditto.
	(init_options): Initialize OPT_DESPECKLE.
	(reader_process): Add despeckling support.
	(sane_control_option): Ditto.
	(sane_start): Initialize req.despeckle.

	* backend/qcam.h: New member DESPECKLE.

	* frontend/preview.c (restore_option): Fix typo: it should be
 	SANE_ACTION_SET_VALUE (not _get_).

	* backend/mustek.c (attach): Turn on MUSTEK_FLAG_USE_EIGHTS for
 	MFS-06000CX.

	* backend/hp.c (attach): Allow both TYPE_PROCESSOR (0x03) and
	TYPE_SCANNER (0x06) as the first inquiry byte---some scanners use
	the former, others the latter.

	* Version 0.51 released.

	* configure.in: Check for gtk_tooltips_new in libgtk.

Mon Mar 31 14:42:56 1997  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>

	* frontend/scan.c (main): Added full_optstring, to allow getopt to
	do full parsing of the option arguments.

	* backend/pnm.c (getparmfromfile): Need to round up the number of
	bytes per line when scanning bitmaps.

Mon Mar 31 07:48:50 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/qcam.c (attach): Send a dummy black-level command.  The
 	first black-level command aftera camera reset doesn't appear to
 	"take."

	* lib/strndup.c: Correct typo: HAVE_STRDUP -> HAVE_STRNDUP.

	* frontend/xscan.c (pref_set_tooltips): New function.
	(pref_build_menu): Build tooltip submenu.

	* frontend/preferences.h: New member TOOLTIPS_ENABLED.
	* frontend/preferences.c: Add entry for TOOLTIPS_ENABLED.

	* frontend/gtkglue.h: Add members TOOLTIPS, TOOLTIPS_FG, and
 	TOOLTIPS_BG.

	* frontend/gtkglue.c (set_tooltip): New function.
	(autobutton_new): Add argument TOOLTIPS and add button-description
 	via set_tooltip().
	(button_new): New args TOOLTIPS & DESC.  Set DESC as tooltip help
 	string.
	(scale_new): Ditto.
	(option_menu_new): Ditto.
	(text_entry_new): Ditto.
	(panel_destroy): Destroy dialog tooltips as well.
	(panel_build): Create tooltips and allocate colors for it; pass
	new args to above functions.
	(gsg_set_tooltips): New function.

	* Version 0.5 released.

	* backend/Makefile.in (install): Add missing double-quotes to
 	$(LIBS) and $(CONFIGS).  Also create a symlink for libsane.a.

	* ltconfig: Revert back to version 0.9.
	* ltmain.sh: Ditto.

	* frontend/scan.c (print_option): Substitute our own help string
 	for -x and -y options.
	(main): Remove BROKEN_GETOPT code.

	* frontend/Makefile.in (CPPFLAGS): Undo yesterday's change.
	* lib/getopt1.c: Ditto.
	* lib/getopt.c: Ditto.

	* frontend/scan.c (main): Add some clever getopt () hackery to
 	work around multi-scan getopt () bug (patch by Gord Matzigkeit).

	* backend/qcam.README: Correct path of configuration file.

Sun Mar 30 21:42:12 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/Makefile.in (CPPFLAGS): Add back -DBROKEN_GETOPT.

	* frontend/scan.c (main): Reinstantiate BROKEN_GETOPT code.
	getopt_long() is _STILL_ broken. ;-(

	* lib/getopt.c: Use this code if __GNU_LIBRARY__ <= 6.  Early
	versions of glibc had a buggy getopt().
	* lib/getopt1.c: Ditto.

	* frontend/Makefile.in (xscan): Mention $(LIBSANEI).

	* frontend/xscan.c: Include <libgimp/gimp.h>, not <gimp.h>.

	* Makefile.in (distclean): Mention libtool.
	* configure.in (AC_CHECK_FUNCS): Ditto.

	* include/config.h.in: Add undef of STRSEP.

	* sanei/sane_strstatus.c: Move to backend directory to minimize
	chance of confusing this with a SANE-internal routine.

	* sanei/Makefile.in (LIBSANEI_OBJS): Remove sane_strstatus.o.
	(LIBSANEI_LTOBJS):  Remove sane_strstatus.lo.

	* backend/Makefile.in (libsane-%.la): Mention sane_strstatus.lo
 	explicitly (every SANE backend library MUST define this function
	so we can switch backends at will).

	* frontend/Makefile.in (SCAN_OBJS): Remove getopt.o, getopt1.o.

	* Makefile.in (SUBDIRS): Mention lib as first directory.

	* configure.in (AC_OUTPUT): Mention lib/Makefile.

	* lib/strsep.c: New file.
	* lib/strndup.c: Ditto.
	* lib/Makefile.in: Ditto.

	* sanei/test_wire.c (main): Initialize codecs through
 	sanei_w_init().

	* sanei/sanei_codec_bin.c (sanei_codec_bin_init): Ditto.

	* sanei/sanei_codec_ascii.c (sanei_codec_ascii_init): Remove
 	w->buffer initalization---this function should be called through
	sanei_w_init () only.

	* sanei/sanei_scsi.c: Rename _sanei_scsi_max_request_size to
 	sanei_scsi_max_request_size.

	* backend/mustek.c (reader_process): Rename macro
 	SANEI_SCSI_MAX_REQUEST_SIZE to variable
 	sanei_scsi_max_request_size.

	* include/sanei_scsi.h: Rename _sanei_scsi_max_request_size to
 	sanei_scsi_max_request_size (names with a leading underscore are
 	reserved for libc/system).
	(SANEI_SCSI_MAX_REQUEST_SIZE): Remove macro.

	* frontend/scan.c (main): Add a brief description of the program.

	* frontend/getopt.c: Move to lib.
	* frontend/getopt1.c: Ditto.

	* backend/pnm.c (enum ppm_type): Remove non-ANSI trailing comma.
	Correct struct indentation.

	* include/lalloca.h: Isolate alloca cruft in this file.
	* frontend/gtkglue.c: Include lalloca.h in place of alloca hack.
	* frontend/dll.c: Ditto.
	* frontend/scan.c: Ditto.
	* sanei/sanei_load_values.c: Ditto.
	* sanei/sanei_scsi.c: Ditto.

Sat Mar 29 00:14:37 1997  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>

	* backend/pnm.c (sane_read): Slurp in RGB files all at once,
	rather than limping along three bytes at a time.

	* frontend/xscan.c (advance): Only define if HAVE_LIBGIMP.

	* backend/pnm.c (sane_read, sane_start, getparmfromfile): Handle
 	grayscale and monochrome bitmapped PNM files.

	* frontend/scan.c (main): Remove BROKEN_GETOPT workaround---the
	new getopt() works properly when making multiple passes over the
	argument list.

Fri Mar 28 21:33:36 1997  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>

	* configure.in: Make the QuickCam device conditional on whether or
 	not the ioperm function exists.

	* sanei/sanei_scsi.c: created a stubbed version of sanei_scsi_cmd.

	* frontend/scan.c (main): Only print error messages to stderr.
	Use fputs or fputc when it is possible to avoid printf.

	* sanei/sanei_wire.c (sanei_w_array, sanei_w_ptr, sanei_w_init),
 	sanei/sanei_save_values.c (sanei_save_values),
 	sanei/sanei_codec_ascii.c (ascii_w_string): Return an error if
 	malloc fails.

	* sanei/test_wire.c (main): Added --readonly flag to help test
	wire robustness.

	* backend/Makefile.in (LIBSANEI): Deleted the `EXTRA' variable,
	and used the convenience library, ../sanei/libsanei.a.

Sat Mar 29 10:19:58 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* doc/sane.tex: Change version from 0.42 to 0.5.

	* README: Add pointer to frontend & backend specific README files.

	* backend/net.c (connect_dev): Ensure dev->ctl gets closed and
 	reset to -1 in case of failure.

	* configure.in: Look for gtk_preview_new() in libgtk so we can
	ignore old GTK versions against which we can't build.

	* (config.sub): Replace with version that comes with
 	autoconf-2.12.  The version that came with libtool-0.9
	doesn't like i686-unknown-linux.

Fri Mar 28 13:12:17 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* doc/sane.tex (subsection{sane_get_select_fd}): Remove extraneous
 	backslash.

	* backend/stubs.c (sane_cancel): Don't return anything.

	* include/sane.h: Remove trailing comma (for -pedantic).

	* frontend/xscan.c (interface): Complain when trying to call
	a device that's unavailable.
	(select_device_callback): Correct prototype.

	* frontend/xcam.c (main): Remove unused variable `label.'

	* backend/net.c (sane_cancel): Call SANE_NET_CANCEL.
	(sane_start): Handle failure of SANE_NET_START.

	* frontend/saned.c (process_request): Implement SANE_NET_CANCEL.

	* frontend/gtkglue.h (GSGDialogElement): Remove member "label".
	* frontend/gtkglue.c: Update accordingly.
	(button_new): Use gtk_check_button_new_with_label () to simplify
	this function.

	* frontend/gtkglue.c (unit_string): New function.
	(panel_build): Append unit_string () to option's title if
	the unit is not SANE_UNIT_NONE.  Use "title" instead of opt->title
	when creating widgets.

	* frontend/preview.c (preview_update): Compute width/height as
	(max - min + eps) where eps is 1 for integer coordinates and
 	SANE_UNFIX(1) for fixed-point coordinates.
	(display_partial_image): Support different scaling in x/y
 	direction.  In the case where surface_unit == SANE_UNIT_PIXEL,
 	compute xscale/yscale based on the ratio between the _expected_
 	width/height and the actual width/height.  If they're not equal,
 	the backend must be doing some scaling (e.g., transfer-scale in
 	the qcam backend).

	* frontend/xscan.c (init): Disable gtk_rc_parse () calls for now
	since gtk styles seem to be a bit buggy right now.
	(scan_done): Remove input_tag if it is >= 0.

	* frontend/gtkglue.c: Include <preferences.h>.
	(panel_build): For fixed-point range-constraints scale min/max/quant
	based on the preferred metric.
	(scale_update): Ditto.
	(gsg_update_scan_window): Ditto.

	* backend/mustek.c (sane_control_option): For OPT_GAMMA_VECTOR_*
 	options, fail with SANE_STATUS_INVAL if the vector has zero length
 	(i.e., hasn't been set yet).

	* frontend/progress.c (progress_new): Don't make Cancel the
 	default-button---it's too easy to cancel by mistake otherwise.

	* frontend/sane-style.rc: New file.

	* frontend/xscan.c (init): New function.  Parse gtk_rc_parse ()
	on /usr/local/share/sane-style.rc and ~/.sane/sane-style.rc if
	those files exist.

	* configure.in (CPPFLAGS): Add PATH_SANE_DATA_DIR.

	* frontend/gtkglue.c (gsg_warning): New function.
	(gsg_message): New function.
	(gsg_error): Implement in terms of gsg_message ().

Thu Mar 27 16:52:27 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/gtkglue.c (gsg_make_path): Terminate buffer with '\0'
	before attempting mkdir().

	* frontend/xcam.c (main): Use gtk_menu_item_new_label () instead
	of gtk_label_new ()/gtk_menu_item_new ().

	* frontend/preview.c (establish_selection): Invoke
 	param_change_callback only if non-NULL.
	(preview_update): Convert scale range to inches if that's user's
	preference.

	* frontend/xcam.c (delayed_switch): New function.
	(device_activate_callback): Call delayed_switch() rather than
 	executing that code directly.  Pete tells me GTK is not designed
 	to have a widget rebuilt while a submenu is active.

	* frontend/gtkglue.c (panel_build): Avoid using notebook widget
 	until GTK+ has been fixed.
	(idle_handler): New function: rebuild dialog if dialog->rebuild is
 	set.
	(set_option): Set dialog->rebuild to TRUE and schedule
 	idle_handler() rather than directly calling panel_rebuild().  Pete
 	tells me GTK is not designed to have a widget rebuilt while a
 	submenu is active.
	(gsg_refresh_dialog): Ditto.

Thu Mar 27 14:54:23 1997  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>

	* backend/Makefile.in: Converted all for statements that might be
	empty to use a temporary list variable.

	* frontend/Makefile.in (scan): Added getopt.o, getopt1.o to scan
	dependencies.

	* frontend/getopt.c, frontend/getopt1.c, include/getopt.h: Added
	to the distribution.

	* backend/net.c (connect_dev), frontend/saned.c (main): Don't use
 	TCP_NODELAY if it has not been defined.  Look up tcp protocol
 	number if SOL_TCP is not defined.

	* sanei/test_wire.c (main): lseek after changing direction, or the
	direction change ends up at the end of the output file.
	Added option parsing, a usage message, and other cleanups.

	* sanei/sanei_codec_ascii.c (sanei_codec_ascii_init),
 	sanei/sanei_codec_bin.c (sanei_codec_bin_init): Initialize the
 	wire if it has a 0-length buffer.

	* sanei/sanei_wire.c (sanei_w_init): Only call the codec_init_func
	if it is not NULL.

	* sanei/sanei_scsi.c: Parameterize inclusion of generic SCSI
	headers based on HAVE_SCSI_SG_H, HAVE_SYS_SCSI_H, or
	HAVE_SYS_SCSIIO_H.

	* configure.in (AC_CHECK_HEADERS): Check for scsi/sg.h,
	sys/scsi.h, and sys/scsiio.h.

	* sanei/sanei_load_values.c, sanei/sanei_scsi.c, backend/dll.c:
 	Replaced unconditional alloca.h include with the cruft suggested
 	by the Autoconf manual.

	* sanei/alloca.c: Add to distribution.

	* sanei/Makefile.in: Eliminate GNU make dependencies, and use
	@ALLOCA@ and @LTALLOCA@ as appropriate.

	* configure.in (AM_FUNC_ALLOCA): Use it.

	* aclocal.m4 (AM_FUNC_ALLOCA): Define it.

Wed Mar 26 17:25:49 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* sanei/sanei_wire.c (sanei_w_status): Update *v only when decoding.
	(sanei_w_bool): Ditto.
	(sanei_w_constraint_type): Ditto.
	(sanei_w_value_type): Ditto.
	(sanei_w_unit): Ditto.
	(sanei_w_action): Ditto.
	(sanei_w_frame): Ditto.

	* frontend/xscan.c (quit_xscan): Always invoke gtk_main_quit()
	(not just in standalone mode).
	(quit_callback): Correct prototype.

	* backend/pnm.c (sod): Fix doc-string for option "three-pass".

	* frontend/xscan.c (advance): New function.
	(input_available): Support 1 bpp frames.  Call advance() instead
 	of open-coding it.  Add RED/GREEN/BLUE frame support in GIMP mode.
	Complain when encountering unknown depth.
	(ScanWin): add member first_frame.
	(scan_start): Initialize first_frame and frame_offset in
	GIMP mode.

	* Integrate force unidirectional mode patch by Guido Muesch
	  <odiug@faho.rwth-aachen.de>:
	* backend/qcam.c (attach): Force uni-directional mode if port
	address starts with `u'.
	(attach): Add debug statement to print QCam version.

	* Integrate 3-pass patches by Heiko
	  <Heiko.Schroeder@Post.RWTH-Aachen.de>:
	* backend/mustek.cb
 	(scan_area_and_windows): Use 1/8" mode when MUSTEK_FLAG_USE_EIGHTS
 	is on (instead of pixel unit).
	(mode_select): Set bit 3 in mode byte only if
 	MUSTEK_FLAG_USE_EIGHTS is off.
	(encode_resolution): Don't do funky encoding for 3-pass scanners
 	in 10% resolution mode.  It seems the docs are wrong and the
 	actual scanners require a much simpler setup.

	* frontend/preview.h: Add include of <sys/types.h>.

Sat Mar 22 16:37:34 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/xscan.c (input_available): Reset ScanWin.x to zero at
 	the end of each line.
	(input_available): Reset tile_offset to zero after updating a
 	tile.
	(scan_done): Call gimp_display_new() to display the newly acquired
	image.  Draw final few lines of image if image height is not a multiple
	of the tile-height.

	* frontend/saned.c (process_request): quit when receiving
	unexpected procedure number---ignoring is dangerous.

	* backend/dll.c (load): Fix off-by-one bug in allocation of
	libname.

	* frontend/xcam.c (prompt_for_device_name): Move grab-default
	call behind signal_connect since otherwise the default action
	won't work.

	* frontend/xscan.c (choose_device): Let "Ok" button be the one
	that gets activated by default (by hitting the Return key).

	* frontend/preview.c (preview_destroy): Rename save_preview_image
	to preserve_preview_image.
  	* frontend/preview.h: Ditto.

	* frontend/preview.c (restore_preview_image): New function.
	(preview_destroy): Save preview image if it exists.
	(preview_scan): New parameter SELECTION_ONLY.  If true,
 	preview-scanning is limited to the selected area.

	* frontend/xscan.c (scan_done): Call quit_xscan() to exit.
	(quit_xscan): Destroy preview if ScanWin.preview is non-NULL.

	* frontend/preview.c (draw_selection): Don't draw if p->gc is
	NULL (i.e., if windows aren't mapped yet).

	* frontend/xscan.c: Move HAVE_LIBGIMP-specific code further
	down (past the type & global variable decls).

	* configure.in (CPPFLAGS): Make --disable-shared impy
 	--enable-preload.

	* include/config.h.in: Add HAVE_STRNDUP.

Fri Mar 21 00:01:00 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* sanei/sanei_scsi.c (sanei_scsi_cmd): Implemented FreeBSD
	version (untested).

	* sanei/sanei_load_values.c: Include <alloca.h>

	* frontend/preview.c (update_selection): New function to set
	selection based on current scan-area option values.
	(preview_update): Call update_selection ().

	* sanei/sanei_save_values.c: Add copyright notice.
	* sanei/sanei_load_values.c: Add copyright notice and explanation
	of algorithm.
	(BITS_PER_LONG): New macro.
	(SET): Ditto.
	(IS_SET): Ditto.
	(sanei_load_values): Add variables caused_reload and keep_going to
	keep track of what options caused a reload_option and whether
	the whole option-value setting process should be repeated.

	* include/config.h.in: Add #undef HAVE_LIBGIMP.
	* frontend/xscan.c: Put all GIMP-dependencies inside
	#ifdef HAVE_LIBGIMP.
	Include <config.h>.

	* sanei/sanei_wire.c (sanei_w_init): Initialize status to 0.
	(sanei_w_free): Preserve existing direction and do not flush i/o.
	(sanei_w_space): Return EINVAL if reading 0 bytes.

Thu Mar 20 09:11:21 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/gtkglue.h (dev_name): New member.
	* frontend/gtkglue.c (gsg_destroy_dialog): free dialog->dev_name.
	(gsg_create_dialog): Keep copy of device name in dev_name member.

	* include/sanei_backend.h: Move stubs into backend/stubs.c and
	define redirection macros only if STUBS is not defined.
	* backend/stubs.c: New file.

	* configure.in (AC_PROG_RANLIB): Removed.  No longer needed with
	libtool.
	* (frontend/Makefile.in): Adapt to libtool.
	* (backend/Makefile.in): Ditto.
	* (sanei/Makefile.in): Ditto.

	* backend/mustek.c (attach): Check result[0] == 0x06 to find out
 	whether we're dealing with a scanner (rather than attemting to
 	find the string "SCANNER" ).

	* backend/hp.c (sane_read): Initialize nread with max_len, not
 	*len.
	(sane_get_parameters): Add missing `== 0' comparison for strcmp()
 	calls.
	(inquire): Generalize so we can inquire any quantity and improve
 	parsing.
	(attach): Use reasonable default value if inquiry of a quantity
 	fails.
	(sane_start): Report error if inquiry of a scan parameter fails.

Wed Mar 19 18:03:38 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/xcam.c (prompt_for_device_name): grab default for OK
 	button (doesn't seem to work, though).

	* frontend/progress.c (progress_new): Connect progress_cancel()
 	via signal_connect(), not signal_connect_object() and pass P, not
 	P->SHELL.
	(progress_cancel): Don't free progress structure (must be done by
 	app).

	* frontend/xscan.c (input_available): New function.
	(scan_done): Ditto.
	(scan_start): Ditto.
	(progress_cancel): Simply call sane_cancel().
	(scan_dialog): Moved most of the code to above functions.

	* frontend/gtkglue.c (get_filename_button_clicked): New function.
	(gsg_get_filename): Ditto.

	* frontend/xscan.c (scan_dialog): Do not quit xscan when in
	standalone mode.
	(scan_dialog): Prompt for output filename in standalone mode.
	(filename): New variable.

	* backend/pnm.c (sane_control_option): Remove "pnm." prefix
	in debug messages.

	* backend/qcam.c (sane_cancel): Remove "qcam." prefix in debug
 	messages.

	* backend/mustek.c: Remove "mustek." prefix in debug messages.

Tue Mar 18 17:30:29 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/mustek.c (sane_close): Remove superfluous "[mustek]" in
 	debug string.

	* sanei/sanei_scsi.c (sanei_scsi_cmd): Implement HP-UX version
	of this function (untested).

	* backend/qcam.c (reader_process): Enable code to handle 4 bpp
	and 6 bpp cases.

Thu Mar 13 13:15:21 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* doc/sane.tex (subsection{Scan Area Options}): Attempt to
	clarify the meaning of "top-left" corner.

Tue Mar 11 07:12:53 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/gtkglue.c (panel_build): Fix typo in matching of
	"resolution" option (missing == 0).

Mon Mar 10 20:19:06 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* Announced pre0.5 snapshot.

	* backend/qcam.h: Make transfer-scale part of the "mode" group.

	* backend/qcam.c (sane_read): Moved return of SANE_STATUS_EOF
 	behind test for delivering EOF.

	* frontend/xscan.c (device_dialog): Relabel "Cancel" button to
	"Quit".

	* backend/qcam.c (init_options): Set SANE_CAP_ADVANCED for geometry
	group.
	* backend/mustek.c (init_options): Ditto.

	* backend/pnm.c (pass, three_pass): New variables.
	(sod): Add option "three-pass" to simulate a three-pass scanner.
	(sane_control_option): Add support for three_pass option.
	(getparmfromfile): In three-pass mode, set format and last_frame
	based on `pass'.
	(sane_start): If input file is open already, fail unless we're
	scanning the next frame of a three-pass image.
	(sane_read): Handle three-pass case.

Sun Mar  9 13:20:19 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/gtkglue.c (text_entry_callback): Only call
 	gtk_entry_set_text() if the backend modified the string.  Otherwise,
	infinite recursion occurs on any change (since the change results
	in a change...).

	* frontend/xcam.c (next_frame): Reset win.remaining to zero.

	* backend/qcam.c (init_options): Set size of "resolution" option
	to sizeof("High").

	* doc/sane.tex (subsection{Scan Area Options}): Allow word-list
	as a constraint.

	* configure.in (CFLAGS): Add -D_GNU_SOURCE to CFLAGS since we
	now depend on snprintf ().

	* frontend/xscan.c (device_dialog): Fix typo: PixelHeight should
 	be > 0, not == 0 in order for us to create the preview window.
	(device_dialog): Ditto.
	(device_dialog): Add ScanWin.preview to frame container.

Sat Mar  8 10:19:41 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* doc/sane.tex (subsection{sane_get_select_fd}): Clarify what
	must happen when the end of a frame has been reached.

	* frontend/xcam.c (input_available): Stop when sane_read() returns
	0 bytes.  Fix typo: win.data needs to be set to dst, not src, on
	exit.

	* backend/qcam.h (read_fd): New member.
	* backend/qcam.c (sane_get_select_fd): Return read_fd instead of
	from_child.
	(sane_open): Initialize s->read_fd to -1.
	(sane_close): Close s->select_fd if >= 0.
	(sane_start): Make read_fd dup() of s->from_child.
	(sane_cancel): Close s->read_fd if >= 0.
	(sane_set_io_mode): Modify s->read_fd instead of s->from_child.

	* frontend/scan.c: Include <sanei.h> for NELEMS macro.
	* frontend/xcam.c: Ditto.

	* configure.in (CPPFLAGS): Add defines for V_MAJOR and V_MINOR.
	(V_MAJOR, V_MINOR): New variables.

	* sanei/Makefile.in (SANEI_OBJS): Mention sanei_net.o.

	* include/sanei_net.h: New file (split from sanei_wire.h).
	* sanei/sanei_net.c: New file  (split from sanei_wire.c).

	* configure.in: Add -Wall to CFLAGS when using gcc.

	* frontend/Makefile.in (saned): List -lsanei before -lsane
	so saned never depends on sanei_*-routines that may be present
	in -lsane (the only dependencies for that library must be
	on sane_* names).

	* backend/Makefile.in (LIBS): Remove -ldl (configure will add
	it if available).
	(SHLDFLAGS): Use -usanei_init instead of --whole-archive option.
	(SHLDPOSTFLAGS): Remove --no-whole-archive.

	* backend/dll.c: Add include of <config.h>.
	(DYNAMIC): New macro.  Defined it dynamic loading support is
	available and enabled.
	Include <dlfcn.h> only when DYNAMIC is defined.
	(load): Make no-op when DYNAMIC is not defined.
	(sane_exit): Never call dlclose() if DYNAMIC is not defined.

	* include/sanei_scsi.h: Rename from genscsi.h and rename prefix
	from `genscsi_' to `sanei_scsi_'.
	* sanei/sanei_scsi.c: Ditto.
	* backend/mustek.c: Rename `genscsi_' to `sanei_scsi_'.

	* configure.in: Check for availability of -ldl and <dlfcn.h>.

Fri Mar  7 15:21:38 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* sanei/sanei_wire.c: New file.
	* sanei/sanei_codec_bin.c: Ditto.
	* sanei/sanei_codec_ascii.c: Ditto.

	* backend/dll.c (sane_exit): Call dlclose() only if handle is
 	non-NULL.
	(sane_init): Chain together preloaded backends.

	* backend/qcam.c (attach): Make static.
	(sighandler): Ditto.
	(qc_getstatus): Ditto.
	* backend/mustek.c (attach): Ditto.

	* backend/dll.c (op_name): Remove `sane_' prefix.

	* sanei/sanei_init_debug.c (sanei_init_debug): Upcase backend
	name when building environment variable name.

	* backend/genscsi.c: Make use of sanei_debug.h.

	* backend/mustek.c: Adapt to use sanei_backend.h.
	* backend/net.c: Ditto.
	* backend/pnm.c: Ditto.
	* backend/qcam.c: Ditto.

	* backend/dll.c (sane_exit): Fix typo that resulted in the
	last backend not being exited.

Thu Mar  6 21:25:27 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* doc/sane.tex (subsection{\code{sane\_init}}): Allow
 	authorization callbacks during sane_start() but not during
 	sane_read().

Tue Mar  4 21:04:16 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/mustek.c (sane_close): Print debug message when trying
	to close an unknown handle.

Thu Feb 27 18:10:20 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* doc/sane.tex (chapter{Contact Information}\label{chap:contact}):
	Add `listserv.' to mailing list address---seems to be needed for
	subscriptions etc.

Sun Feb  9 12:54:20 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/mustek.README: Add pointer to Ingmar's 53c400 patch.

Sat Feb  8 11:49:24 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/mustek.c (line_distance): Add more debug output.

Fri Feb  7 19:21:36 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/mustek.c (line_distance): Remove erroneous #ifdef
	around FACTOR and COLOR.

	* doc/sane.tex (subsection{sane_init}): Make username/password
	fixed length arrays so no malloc/free magic is needed.
	(subsection{Preview Mode Option}): New section.

	* include/sane.h: Ditto.

	* include/sane.h (SANE_Char): New type.

Tue Feb  4 18:47:52 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/mustek.c (sane_get_parameters): Correct typo: replace
	s->pass with s->params.format.

Fri Jan 31 16:16:26 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/mustek.c (attach): Print debug message when using
 	special line-distance algorithm.
	Enable special line-distance algorithm only for firmware
 	revisions < 1.02.
	Determine fw revision based on INQUIRY result.

Thu Jan 30 21:22:38 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* doc/sane.tex (section{Attaching to a SANE backend}): Rename
	metanet -> net, netproxy -> saned, metadl -> dll and update
	hierarchy figure as well.  Added autolum meta backend as a
	filter example.

	* TODO: Rename metanet -> net, metadl -> dll.

	* AUTHORS (Frontends): Rename metanet -> net, metadl -> dll,
	mention saned and xcam and sort entries alphabetically.

	* backend/net.c (sane_control_option): Replace all occurances of
 	metanet with net.
	* backend/net.README: Ditto.
	Rename env var METANETHOST to SANE_NET_HOST.

	* backend/dll.README: Replace all occurances of metadl with dll.
	* backend/dll.c: Ditto.

	* backend/dll.conf: Comment out metanet since it's a bit of a
 	security risk (no authentication just yet).

	* backend/Makefile.in (CONFIGS): New macro (list of config files)
	(install): Change install rule so existing configuration files
	are not overwritten.
	Replace all occurances of metanet with net.

	(V_MINOR): Bump up to 43.

Tue Jan 28 08:17:18 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/Makefile (saned): Mention -lsanei before -lsane so
 	saned does not incorrectly depend on sanei_printf/sanei_scanf in
 	-lsane (if it happens to define those symbols).

	* backend/metanet.c (sane_init): Rename SANE_Authorization_Callback
	to SANE_Auth_Callback.
	* backend/mustek.c (sane_init): Ditto.
	* backend/pnm.c (sane_init): Ditto.
	* backend/metadl.c (sane_init): Ditto.

	* frontend/saned.c (main): Put output socket in TCP_NODELAY mode.
	Include of <sys/socket.h>

	* backend/metanet.c (openit): Ditto.

Mon Jan 27 19:32:29 1997  David Mosberger-Tang  <davidm@azstarnet.com>


	* doc/sane.tex (subsection{Device Descriptor Type}): Change vendor
 	name "None" to "Noname".
	* backend/pnm.c (dev): Change vendor name from "noname" to "Noname".

	* include/sane.h (SANE_STATUS_ACCESS_DENIED): New status value.
	* sanei/sane_strstatus.c (sane_strstatus): Return appropriate
	status string.

	* frontend/xscan.c (scan_dialog): Don't depend on first_frame
	when creating image---the old code didn't work for R/G/B-only
	frames anyhow, so there is no point pretending.

	* include/sane.h (SANE_Parameters): Rename first_frame to
	last_frame.
	* backend/metanet.c (sane_get_parameters): Update accordingly.
	* backend/qcam.c (sane_get_parameters): Ditto.
	* frontend/saned.c (readcmd): Ditto.
	* frontend/test.c (testsane): Ditto.
	* backend/mustek.c (sane_get_parameters): Set last_frame unless
	the current pass is acquiring a red- or green-only frame.

	* doc/sane.tex (subsection{sane_get_parameters)): Change
 	FIRST_FRAME into LAST_FRAME.

	* backend/metanet.c: Initialize PEER with -1.
	(sane_get_select_fd): Return PEER and succeed if not negative.

	* include/netsane.h (ns_printf, ns_scanf, netfd_wr, netfd_rd):
 	Remove (obsolete).

	* frontend/saned.c: Increase STRBUF size to 32KB to get better
	scan_read() throughput.

	* include/sane.h (SANE_Athorization_Callback): Return void
 	(instead of int) and make USERNAME and PASSWORD (pointers to)
 	return values.

	* frontend/saned.c (netsane_auth_callback): Update prototype.

	* backend/metanet.c (sane_init): Move assignments out of
 	if-conditional for clarity (and to avoid gcc warning).

	* sanei/sanei_printf.c: Include <memory.h>, <string.h>.

	* backend/Makefile.in (libsane-mustek.a): Replace
 	../sanei/sane_strstatus.o with appropriately defined EXTRA
	macro.

	* backend/mustek.c (attach): Initialize ld.mode to MLD_NORMAL for
 	all scanners but MFS-12000SP.
	(line_distance): In MD_MFS correction mode, do not issue LD
 	command.
	(sane_close): Free s->ld.red_buf if non-NULL.
	(fix_line_distance_mfs): New function.
	(fix_line_distance_normal): Rename from fix_line_distance().
	(reader_process): In MLD_MFS line-distance mode, call the
	mfs-specific routine, not the normal one.

	* backend/mustek.h (Mustek_Scanner): New members ld.red_buf,
 	ld.green_buf.
	(MUSTEK_FLAG_LD_MFS): New flag to indicate when MFS-specific
 	line-distance correction is needed.

	* backend/metanet.c: Fix up some minor formatting problems due
	to indent.

	* Merge in Andy's netsane diffs.

Sun Jan 26 00:04:22 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/xscan.c (zoom_in_preview): Ignore selections of zero
	or negative width/height.
	(set_max_selection): Use SANE_UNFIX() instead of open coding.
	Adapted to use gtkglue.

	* backend/metadl.c (sane_init): Grab authorization callback.
	(authorization_callback): New variable.
	(load): Pass authorization callback to init function.

	* frontend/gtkglue.h (gsg_destroy_dialog): Add param_callback.

Sat Jan 25 17:35:52 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/Makefile.in (distclean): Mention $(TESTPROGRAMS).

	* backend/metanet.c (copy_opt): Fix constraint-length computation.

	* backend/metadl.c (sane_get_devices): Pass along LOCA_ONLY arg
	to backend.

	* frontend/xcam.c (main): Remove extraneous calls to gtk_exit()
	and sane_exit().

	* frontend/scan.c (main): Install sane_exit() as atexit handler.

	* backend/metadl.c (sane_get_devices): Ignore NULL BE_LIST.

	* frontend/saned.c (quit): New function.
	(main): catch SIGALRM, and SIGPIPE.

	* backend/metanet.c (sane_get_devices): Return empty list of
	LOCAL_ONLY is TRUE.

	* frontend/saned.c (readcmd): Don't take LOCAL arg from
 	request---always pass SANE_TRUE!

	* doc/netprotocol.doc (sane_get_devices): Don't need LOCAL arg.

	* include/sanei.h: Include <sane.h>.

	* frontend/test.c (testsane): Print status message instead of
	status code and make robust against failed calls.  Use fprintf(stderr
	instead of printf.

	* backend/qcam.c (reader_process): Remove extraneous arg.
	(reader_process): Declare `static' to make setjmp() safe.

	* frontend/saned.c (readcmd): Delete unused variable schr_hlp.
	(peerfp): New variable.
	Rename ns_printf() to sanei_printf() and pass peerfp arg.
	Rename ns_scanf() to sanei_scanf() and pass peerfp arg.
	(say_helo): Make peerfp refer to fd 0.

	* backend/metanet.c (openit): Return FILE*, not socket.
	(openit): Return 0, not -1 in case of failure.
	(peerfp): New variable.
	Rename ns_printf() to sanei_printf() and pass peerfp arg.
	Rename ns_scanf() to sanei_scanf() and pass peerfp arg.

	* sanei/sane_strstatus.c: New file (in lieu of backend/sane.c)
	* sanei/sanei_constrain_value.c: Ditto.
	* sanei/sanei_init_debug.c: Ditto.

	* sanei/sanei_scanf.c (ns_scanf): New file (based on Andy's
 	ns_scanf).
	Use int8_t for 'c', int32_t for 'd'.
	Include <sys/types.h>.

	* sanei/sanei_printf.c (sanei_printf): New file (based on Andy's
 	ns_printf).
	Use int8_t for 'c', int32_t for 'd'.
	Include <sys/types.h>.

	* include/netsane.h (CMD_SANE_STRS): Remove.

	* backend/metanet.c: Include <errno.h>
	(sane_strstatus): Remove.

	* backend/Makefile.in (BACKENDS): Mention libsane-metanet.

	* backend/metanet.c (openit): Use memcpy instead of bcopy.  Use
 	inet_aton() instead of inet_addr(), don't prototype.
	(sane_get_devices): Use strdup() instead of opencoding it.
	(sane_get_devices): Don't append " (NS)" to modelname!  Metanet
 	already prefixes the devicename with netsane, which is good
 	enough.

	* backend/sanei.h (IF_DBG): New macro.

	* PROJECTS (Backend): Mention saned, metanet, and autoadj.
	(Frontend): New info.

	* AUTHORS: Update to reflect sanescan -> xscan namechange.
	Credit Andy for netsane.

Fri Jan 24 00:01:45 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* doc/sane.tex (subsection{\code{sane\_get\_option\_descriptor}}):
	Define how long the returned option descriptor must remain valid.

	* frontend/gtkglue.c (autobutton_update): Check for
 	SANE_INFO_RELOAD_OPTIONS.
	(button_update): Ditto.

	* frontend/xcam.c (main): Add device info label.

	* backend/mustek.c (init_options): Make OPT_BRIGHTNESS and
 	OPT_CONTRAST inactive by default.

	* frontend/xcam.c (exit_callback): Only call gsg_destroy_dialog()
	if dialog is non-null.

Thu Jan 23 00:17:46 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/mustek.c (sane_control_option): Return
 	SANE_STATUS_DEVICE_BUSY when attempting to set option during
 	scanning.
	(sane_close): Call do_cancel(), not sane_cancel().
	(sane_start): Ditto.

	* backend/pnm.c (sod): Rename "File" group to "Source Selection".

	* frontend/xcam.c (device_name_dialog_cancel): New function.
	(device_name_dialog_ok): Ditto.
	(prompt_for_device_name): Ditto.
	(build_device_menu): Move "Rescan devices..." from build_files_menu()
	to here.  Add "Specify device name..." entry that invokes
	prompt_for_device_name.
	(play_stop_button): Ignore call if there is no device_dialog yet.
	(main): Don't attempt to set preview size if there is no device
	dialog yet.

	* frontend/gtkglue.c (text_entry_callback): Don't ignore tab
	key---it's used to switch focus!

	* backend/qcam.c (qc_wait): Return read value so optimizer won't
 	be able to get rid of it easily.
	(qc_lock_wait): Use same lockname as qcam-0.7d for
 	interoperability.
	(reader_process): Explicitly do an enable_ports() in the reader
 	process.  Linux/x86 doesn't inherit i/o port access rights.

	* frontend/xcam.c (stop_camera): New function.
	(input_available): Use stop_camera().
	(next_frame): Ditto.

	* backend/genscsi.c (genscsi_open): Add missing DBG_INIT(GENSCSI).
	(genscsi_cmd): Return SANE_STATUS_DEVICE_BUSY if EBUSY is
 	returned.

	* frontend/xcam.c (input_available): Fix line wrap for
 	SANE_FRAME_GRAY.

	* include/sane.h: Remove old SANE_STATUS_AGAIN.
	* backend/sane.c (sane_strstatus): Ditto.
	* backend/mustek.c (sane_read): Return SANE_STATUS_GOOD, not AGAIN
	when no data available.
	(sane_start): Add debug printing.
	(sane_set_io_mode): Fix typo: return SANE_STATUS_GOOD on success.

	* backend/mustek.c (sane_control_option): Add support for
 	OPT_BACKTRACK.
	(attach): Add lots of debug printing.

	* backend/qcam.README: New file.

	* backend/qcam.c (sane_control_option): Allow changing resolution
 	while scan is in progress, but set RELOAD_OPTIONS only if not
 	scanning already.

	* frontend/xcam.c (canvas_events): Get rid of old debug messages.

	* backend/qcam.c (sane_get_parameters): Update parameters only if
 	not scanning.  This makes it possible to change certain options
	(such as width/height while a scan is in progress).
	(sane_control_option): Allow changing of image corners,
 	transfer-scale, and depth while scan is in progress.  Set
	RELOAD_PARAMS only if scan is not in progress.
	(sane_start): Return DEVICE_BUSY if scan is in progress.

	* configure.in (PACKAGE_VERSION): Version 0.41 released.

	* backend/qcam.c (brightness_range): New variable.
	(init_options): Use brightness_range instead of u8_range to
	avoid going into bulb-mode accidentally.

Wed Jan 22 09:16:21 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/qcam.c (reader_process): Correct typo: it's buf, not
 	buffer that we want to write out in high-res mode.
	(qc_reset): New function.
	(reader_process): Send at least one byte of data after receiving a
 	signal.
	(sighandler): New function.
	(sane_cancel): If a read request is outstanding, cancel request by
 	(a) sending SIGINT to reader process, (b) reading one byte of data
 	in blocking mode, and then (c) reading whatever is left in the
 	pipe in non-blocking mode.
	(sane_read): Return SANE_STATUS_CANCELLED if SCANNING is not set.

	* backend/qcam.h (QC_Scanner): Remove unused x/y fields.

	* backend/qcam.c (sane_close): Call disable_ports().
	(sane_init): Replace isblank() with isspace() (former is a GNU
 	extension).
	(sane_control_option): Scale corner coordinates when switching
 	resolution and ensure they're always legal values.
	(sane_close): Check for reader_pid >= 0 not != 0!
	(sane_exit): Move disable_ports () from sane_close to here.
	(sane_start): Keep track of when we're holding lock.
	(sane_read): Release lock if s->holding_lock is TRUE and we
	read a few bytes.
	(sane_cancel): Release lock if it's being held.

	* backend/qcam.c: Clean up unused variables.

Tue Jan 21 13:49:00 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/qcam.c (sane_control_option): Keep track of changes to
 	option values.
	(sane_get_select_fd): Implemented.
	(sane_set_io_mode): Ditto.
	(reader_process): New function.
	(sane_start): Modify to use reader_process().

	* backend/qcam.h: (struct QC_Scanner): New field value_changed.

Mon Jan 20 22:11:11 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/metadl.c (sane_open): Correctly handle case where
	backend name is empty.

Sun Jan 19 10:29:43 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/qcam.c (attach): Add qc_wait() calls after each
 	write_lpcontrol() call to ensure reliable communication.
	(attach): Add debug output in case of failure.

	* Version 0.4 released.

Sat Jan 18 10:12:40 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/xscan.c (get_scan_size): Handle case where scan
 	width/height is of type SANE_TYPE_INT.
	(get_scan_size): If width/height unit is pixels and the height is
 	less than 500 pixels, use a ratio of 1.
	(device_dialog): Call update_complete_dialog() to ensure inactive
 	options do not show (there probably is a better solution to this).

	* frontend/scan.c (main): Compute bottom-right position as
 	top-left + width/height - 1 (the - 1 is new and necessary and
 	works both for fixed and integer values).
	(print_option): Insert line-break when column >= 79 (not 80) to
 	leave last column blank (better when running inside Emacs, for
 	example).
	(main): Fix typos: case 't': window[2] -> window[3], switch short
 	option names for top/left.
	(print_option): Print current option values (except for vectors).
	(fetch_options): Another off by one bug: width is br_x|y-tl_x|y+1.

Thu Jan 16 20:26:29 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/sane.c (sanei_constrain_value): Fix so it properly
 	handles strings that are longer than any of the strings in a
 	string list.

	* frontend/scan.c (main): Subtract value of top-left-x/top-left-y
	from width/height, respectively after all options have been
	read in.
	(main): Print help message _after_ options have been processed.
	(fetch_options): New function.
	(set_option): Call fetch_options() if SANE_INFO_RELOAD_OPTIONS is
	set.
	(main): Call fetch_options() instead of open-coding same.

	* doc/sane.tex (subsection{Device Descriptor Type}): Add index
	entry for device-name.

Wed Jan 15 19:55:03 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/metadl.c (sane_init): Call DBG_INIT() and declare
	debug level variable with DBG_DECL.  Added various debug
	statements.

	* backend/pnm.c (sane_init): Ditto.
	* backend/mustek.c (sane_init): Ditto.

	* frontend/scan.c (parse_scalar): Default to mm again (instead of
 	cm).  Using `mm' as the default is counter-intuitive since the
 	help info is printed with `mm' as the unit.

	* frontend/xscan.c (main): Pass local_only==SANE_FALSE as second
	argument to sane_get_devices().

Sun Jan 12 13:12:45 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/sane.c (sanei_constrain_value): For string-lists, ignore
 	case and allow prefixes as long as they remain unique.

	* frontend/scan.c (print_option): Print "auto" as a legal option
 	value if the option has capability SANE_CAP_AUTOMATIC set.
	(process_backend_option): If option has SANE_CAP_AUTOMATIC set,
 	let option value of "auto" turn on automatic mode.

Wed Jan  8 19:55:31 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/Makefile.in (install): Modify install rule so that
	$(libdir) gets added to /etc/ld.so.conf if it isn't there
	already.
	(COMPILE): Use $(SHCFLAGS) instead of $(CFLAGS).
	(LINK): Remove (unused).

Wed Dec 25 20:21:39 1996  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/mustek.README: Add section "SCSI Adapter Tips".

Fri Dec 13 20:02:03 1996  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/mustek.c (line_distance): Rename
 	LINE_DISTANCE_WORKAROUND to NEED_MUSTEK_LINE_DISTANCE_WORKAROUND.
	Include <config.h>.

Thu Dec 12 20:19:26 1996  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/mustek.h (next): New member.  Forms linked list of open
 	handles.  * backend/mustek.c (first_handle): New variable.  Root
 	of list of open handles.
	(sane_open): Insert handle into list of open handles.
	(sane_close): Remove handle from list of open handles.

Wed Dec  4 18:37:45 1996  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/mustek.c (attach): Added back MFS-12000SP, MFS-08000SP,
 	and MFS-06000SP.  At least the first one really does exist.  I
 	don't know how the differ from the other scanners, but it looks as
 	if line-distance correction might be different.

Tue Dec  3 21:22:54 1996  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/sane.c (sane_strstatus): Remove trailing dot from error
 	message.

Mon Dec  2 19:12:53 1996  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/mustek.c (max_string_size): New function to determine
 	maximum size of a string constraint list.
	(init_options): Use max_string_size () to initialize size of
 	string-valued options.

Sun Dec  1 15:44:53 1996  David Mosberger-Tang  <davidm@azstarnet.com>

	* Version 0.1 released.

	* backend/mustek.c (attach): Fix mispelled/bad model names:
		MFS-12000SP -> MSF-12000SP
		MFS-08000SP -> MSF-08000SP
		MFS-06000SP -> MSF-06000SP
		MFS-08000CZ -> <removed>
		MFS-06000CZ -> <removed>

Tue Nov 26 19:11:18 1996  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/scan.c (print_option): Separate option name from option
 	values by blank, not equal so the syntax is correct even for short
 	options.
	(parse_scalar): Added missing newline to error message.

Sat Nov 16 17:26:19 1996  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/scan.c (main): Created (by Andy).

	* backend/pnm.c: Adapted from Andy's pnm.c (just minor updates).

	* backend/mustek.c: Created.
	* backend/metadl.c: Ditto.