sane-project-backends/doc/sane-ricoh.man

80 wiersze
2.1 KiB
Groff
Czysty Zwykły widok Historia

.TH sane-ricoh 5 "24 Jun 2000" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy"
2000-08-12 15:11:46 +00:00
.IX sane-ricoh
.SH NAME
sane-ricoh \- SANE backend for Ricoh flatbed scanners
2000-08-12 15:11:46 +00:00
.SH DESCRIPTION
The
.B sane-ricoh
library implements a SANE (Scanner Access Now Easy) backend that
provides access to the following Ricoh flatbed scanners:
.PP
.RS
IS50
.br
IS60
.br
.RE
.PP
.SH "DEVICE NAMES"
This backend expects device names of the form:
.PP
.RS
.I special
.RE
.PP
Where
.I special
is the path-name for the special device that corresponds to a
SCSI scanner. The special device name must be a generic SCSI device or a
symlink to such a device. The program
.IR sane-find-scanner
helps to find out the correct device. Under Linux, such a device name
2000-08-12 15:11:46 +00:00
could be
.I /dev/sga
or
.IR /dev/sge ,
for example. See sane-scsi(5) for details.
.SH FILES
.TP
.I @CONFIGDIR@/ricoh.conf
The backend configuration file (see also description of
.B SANE_CONFIG_DIR
below).
.TP
.I @LIBDIR@/libsane-ricoh.a
The static library implementing this backend.
.TP
.I @LIBDIR@/libsane-ricoh.so
The shared library implementing this backend (present on systems that
support dynamic loading).
.SH ENVIRONMENT
.TP
.B SANE_CONFIG_DIR
This environment variable specifies the list of directories that may
contain the configuration file. Under UNIX, the directories are
separated by a colon (`:'), under OS/2, they are separated by a
semi-colon (`;'). If this variable is not set, the configuration file
is searched in two default directories: first, the current working
directory (".") and then in @CONFIGDIR@. If the value of the
environment variable ends with the directory separator character, then
the default directories are searched after the explicitly specified
directories. For example, setting
.B SANE_CONFIG_DIR
to "/tmp/config:" would result in directories "tmp/config", ".", and
"@CONFIGDIR@" being searched (in this order).
.TP
.B SANE_DEBUG_RICOH
If the library was compiled with debug support enabled, this
environment variable controls the debug level for this backend. Higher
debug levels increase the verbosity of the output.
Example:
export SANE_DEBUG_RICOH=4
.SH "SEE ALSO"
2005-11-24 20:17:43 +00:00
sane(7), sane-scsi(5)
2000-08-12 15:11:46 +00:00
.SH AUTHOR
Feico W. Dillema