sane-project-backends/backend/snapscan.conf.in

#------------------------------ General -----------------------------------

# Change to the fully qualified filename of your firmware file, if
# firmware upload is needed by the scanner
firmware @DATADIR@/sane/snapscan/your-firmwarefile.bin

# If not automatically found you may manually specify a device name.

# For USB scanners also specify bus=usb, e.g.
# /dev/usb/scanner0 bus=usb

# For SCSI scanners specify the generic device, e.g. /dev/sg0 on Linux.
# /dev/sg0

#---------------------------------------------------------------------------
# No changes should be necessary below this line
#---------------------------------------------------------------------------

#-------------------------- SCSI scanners ----------------------------------
# These SCSI devices will be probed automatically
scsi AGFA * Scanner
scsi COLOR * Scanner
scsi Color * Scanner
scsi ACERPERI * Scanner

#--------------------------- USB scanners -----------------------------------
# These USB devices will be probed automatically
# (This will currently work only on Linux)

# Benq/Acer/Vuego 310U
usb 0x04a5 0x1a20
usb 0x04a5 0x1a26

# Benq/Acer/Vuego 320U
usb 0x04a5 0x2022

# Benq/Acer/Vuego 620U / 620UT
usb 0x04a5 0x1a2a
usb 0x04a5 0x2040

# Benq/Acer/Vuego 640U
usb 0x04a5 0x2060

# Benq/Acer/Vuego 640BU
usb 0x04a5 0x207e

# Benq/Acer/Vuego 640BT
usb 0x04a5 0x20be

# Benq/Acer/Vuego 1240U
usb 0x04a5 0x20c0

# Benq/Acer/Vuego 3300 / 4300
usb 0x04a5 0x20b0

# Benq/Acer/Vuego 4300
usb 0x04a5 0x20de

# Benq 5000E / 5000U
usb 0x04a5 0x20f8

# Benq 5000
usb 0x04a5 0x20fc

# Benq/Acer 5300
usb 0x04a5 0x20fe

# Benq 5250C
usb 0x04a5 0x2137

# Agfa 1236U
usb 0x06bd 0x0002

# Agfa 1212U
usb 0x06bd 0x0001
usb 0x06bd 0x2061

# Agfa Snapscan e10
usb 0x06bd 0x2093

# Agfa Snapscan e20
usb 0x06bd 0x2091

# Agfa Snapscan e25
usb 0x06bd 0x2095

# Agfa Snapscan e26
usb 0x06bd 0x2097

# Agfa Snapscan e40
usb 0x06bd 0x208d

# Agfa Snapscan e42
usb 0x06bd 0x20ff

# Agfa Snapscan e50
usb 0x06bd 0x208f

# Agfa Snapscan e52
usb 0x06bd 0x20fd

# Epson Perfection 660
usb 0x04b8 0x0114

# Epson Perfection 1670
usb 0x04b8 0x011f

# Epson Perfection 2480
usb 0x04b8 0x0121

# Epson Perfection 3490
usb 0x04b8 0x0122

# Epson Stylus CX-1500
usb 0x04b8 0x080c
Snapscan backend version 1.4.9 2002-03-24 12:32:38 +00:00			`#------------------------------ General -----------------------------------`
update snapscan to snapshot 20011008 2001-10-09 09:45:21 +00:00
Make /dev/sga the default device in snapscan.conf 2001-10-26 20:04:55 +00:00			`# Change to the fully qualified filename of your firmware file, if`
update snapscan to snapshot 20011008 2001-10-09 09:45:21 +00:00			`# firmware upload is needed by the scanner`
Renamed backend configuration files from .conf to .conf.in. The configuration files are preprocessed by backend/Makefile now and variables like @DATADIR@ are substituted by the appropriate directories. This is especially useful for firmware locations. For the firmware paths for the artec_eplus48u, gt68xx, and snapscan backends variables were used. Bug #302590. 2006-01-05 16:27:10 +00:00			`firmware @DATADIR@/sane/snapscan/your-firmwarefile.bin`
Snapscan backend version 1.4.9 2002-03-24 12:32:38 +00:00
			`# If not automatically found you may manually specify a device name.`

			`# For USB scanners also specify bus=usb, e.g.`
			`# /dev/usb/scanner0 bus=usb`

			`# For SCSI scanners specify the generic device, e.g. /dev/sg0 on Linux.`
			`# /dev/sg0`

			`#---------------------------------------------------------------------------`
			`# No changes should be necessary below this line`
			`#---------------------------------------------------------------------------`

			`#-------------------------- SCSI scanners ----------------------------------`
			`# These SCSI devices will be probed automatically`
			`scsi AGFA * Scanner`
			`scsi COLOR * Scanner`
			`scsi Color * Scanner`
			`scsi ACERPERI * Scanner`

			`#--------------------------- USB scanners -----------------------------------`
			`# These USB devices will be probed automatically`
			`# (This will currently work only on Linux)`

Update to snapscan backend 1.4.18 2003-01-08 21:45:28 +00:00			`# Benq/Acer/Vuego 310U`
			`usb 0x04a5 0x1a20`
Scanner ID cleanup 2003-08-19 21:05:08 +00:00			`usb 0x04a5 0x1a26`
Update to snapscan backend 1.4.18 2003-01-08 21:45:28 +00:00
Added additional USB IDs for Acer 320U and 620U 2002-05-13 22:07:56 +00:00			`# Benq/Acer/Vuego 320U`
			`usb 0x04a5 0x2022`
SnapScan backend 1.4.15 2002-07-12 23:29:11 +00:00
Added additional USB IDs for Acer 320U and 620U 2002-05-13 22:07:56 +00:00			`# Benq/Acer/Vuego 620U / 620UT`
			`usb 0x04a5 0x1a2a`
Snapscan backend version 1.4.9 2002-03-24 12:32:38 +00:00			`usb 0x04a5 0x2040`
SnapScan backend 1.4.15 2002-07-12 23:29:11 +00:00
Added additional USB IDs for Acer 320U and 620U 2002-05-13 22:07:56 +00:00			`# Benq/Acer/Vuego 640U`
Snapscan backend version 1.4.9 2002-03-24 12:32:38 +00:00			`usb 0x04a5 0x2060`
SnapScan backend 1.4.15 2002-07-12 23:29:11 +00:00
Added additional USB IDs for Acer 320U and 620U 2002-05-13 22:07:56 +00:00			`# Benq/Acer/Vuego 640BU`
Snapscan backend version 1.4.9 2002-03-24 12:32:38 +00:00			`usb 0x04a5 0x207e`
SnapScan backend 1.4.15 2002-07-12 23:29:11 +00:00
Added USB ID for Benq 640BT 2004-04-29 15:56:48 +00:00			`# Benq/Acer/Vuego 640BT`
			`usb 0x04a5 0x20be`

Added additional USB IDs for Acer 320U and 620U 2002-05-13 22:07:56 +00:00			`# Benq/Acer/Vuego 1240U`
Snapscan backend version 1.4.9 2002-03-24 12:32:38 +00:00			`usb 0x04a5 0x20c0`
SnapScan backend 1.4.15 2002-07-12 23:29:11 +00:00
Added additional USB IDs for Acer 320U and 620U 2002-05-13 22:07:56 +00:00			`# Benq/Acer/Vuego 3300 / 4300`
Snapscan backend version 1.4.9 2002-03-24 12:32:38 +00:00			`usb 0x04a5 0x20b0`
SnapScan backend 1.4.15 2002-07-12 23:29:11 +00:00
Added additional USB IDs for Acer 320U and 620U 2002-05-13 22:07:56 +00:00			`# Benq/Acer/Vuego 4300`
Snapscan backend version 1.4.9 2002-03-24 12:32:38 +00:00			`usb 0x04a5 0x20de`
SnapScan backend 1.4.15 2002-07-12 23:29:11 +00:00
Distinguish between Benq 5000/5000E/5000U 2005-10-31 21:08:47 +00:00			`# Benq 5000E / 5000U`
Added IDs for Benq 5250C and 5000S 2005-02-08 22:17:53 +00:00			`usb 0x04a5 0x20f8`

			`# Benq 5000`
SnapScan backend 1.4.16 (support for Acer/Benq 5000) 2002-09-26 20:09:24 +00:00			`usb 0x04a5 0x20fc`

Added IDs for Benq 5250C and 5000S 2005-02-08 22:17:53 +00:00			`# Benq/Acer 5300`
SnapScan backend 1.4.15 2002-07-12 23:29:11 +00:00			`usb 0x04a5 0x20fe`

Renamed backend configuration files from .conf to .conf.in. The configuration files are preprocessed by backend/Makefile now and variables like @DATADIR@ are substituted by the appropriate directories. This is especially useful for firmware locations. For the firmware paths for the artec_eplus48u, gt68xx, and snapscan backends variables were used. Bug #302590. 2006-01-05 16:27:10 +00:00			`# Benq 5250C`
Added IDs for Benq 5250C and 5000S 2005-02-08 22:17:53 +00:00			`usb 0x04a5 0x2137`

Snapscan backend version 1.4.9 2002-03-24 12:32:38 +00:00			`# Agfa 1236U`
			`usb 0x06bd 0x0002`
SnapScan backend 1.4.15 2002-07-12 23:29:11 +00:00
Snapscan backend version 1.4.9 2002-03-24 12:32:38 +00:00			`# Agfa 1212U`
			`usb 0x06bd 0x0001`
			`usb 0x06bd 0x2061`
SnapScan backend 1.4.15 2002-07-12 23:29:11 +00:00
SnapScan backend 1.4.17 2002-10-14 21:49:45 +00:00			`# Agfa Snapscan e10`
			`usb 0x06bd 0x2093`

Snapscan backend version 1.4.9 2002-03-24 12:32:38 +00:00			`# Agfa Snapscan e20`
			`usb 0x06bd 0x2091`
SnapScan backend 1.4.15 2002-07-12 23:29:11 +00:00
Snapscan backend version 1.4.9 2002-03-24 12:32:38 +00:00			`# Agfa Snapscan e25`
			`usb 0x06bd 0x2095`
SnapScan backend 1.4.15 2002-07-12 23:29:11 +00:00
Snapscan backend version 1.4.9 2002-03-24 12:32:38 +00:00			`# Agfa Snapscan e26`
			`usb 0x06bd 0x2097`
SnapScan backend 1.4.15 2002-07-12 23:29:11 +00:00
Snapscan backend version 1.4.9 2002-03-24 12:32:38 +00:00			`# Agfa Snapscan e40`
			`usb 0x06bd 0x208d`
SnapScan backend 1.4.15 2002-07-12 23:29:11 +00:00
Snapscan backend version 1.4.9 2002-03-24 12:32:38 +00:00			`# Agfa Snapscan e42`
			`usb 0x06bd 0x20ff`
SnapScan backend 1.4.15 2002-07-12 23:29:11 +00:00
Snapscan backend version 1.4.9 2002-03-24 12:32:38 +00:00			`# Agfa Snapscan e50`
			`usb 0x06bd 0x208f`
SnapScan backend 1.4.15 2002-07-12 23:29:11 +00:00
Snapscan backend version 1.4.9 2002-03-24 12:32:38 +00:00			`# Agfa Snapscan e52`
			`usb 0x06bd 0x20fd`

SnapScan backend 1.4.25 2003-04-02 21:01:07 +00:00			`# Epson Perfection 660`
			`usb 0x04b8 0x0114`
Bugfixes for SnapScan backend 2003-10-21 20:43:25 +00:00
			`# Epson Perfection 1670`
			`usb 0x04b8 0x011f`
Added support for Epson 2480 2004-09-02 20:59:12 +00:00
			`# Epson Perfection 2480`
			`usb 0x04b8 0x0121`
Added support for Epson 3490/3590 (thanks to Matt Judge) 2005-08-15 18:06:38 +00:00
			`# Epson Perfection 3490`
			`usb 0x04b8 0x0122`
Added Epson Stylus CX-1500 2006-01-10 19:32:39 +00:00
			`# Epson Stylus CX-1500`
			`usb 0x04b8 0x080c`