sane-project-backends/backend/plustek-pp_p48xx.c

876 wiersze
24 KiB
C
Czysty Zwykły widok Historia

2003-09-24 20:21:55 +00:00
/* @file plustek-pp_p48xx.c
* @brief here we have all functionality according to the ASIC96001/3 based
* models.
*
* based on sources acquired from Plustek Inc.
* Copyright (C) 1998 Plustek Inc.
2004-01-09 15:57:55 +00:00
* Copyright (C) 2000-2004 Gerhard Jaeger <gerhard@gjaeger.de>
* also based on the work done by Rick Bronson
*
* History:
2003-09-24 20:21:55 +00:00
* - 0.30 - initial version
* - 0.31 - fixed a bug for the return value in p48xxDoTest
* - added additional debug messages
* - added function p48xxCheck4800Memory
* - 0.32 - added debug messages
* - fixed a bug in p48xxDoTest
* - disabled RD_WatchDogControl, lamp will be controlled by driver
* - 0.33 - added function p48xxSetAsicRegisters()
* - fixed a bug in p48xxDoTest (reset the ASIC registers)
* - removed p48xxPositionLamp
* - 0.34 - added some comments
* - 0.35 - added some comments
* - 0.36 - added function p48xxInitAllModules() to allow reinit of the modules
* - switching from Full- to Halfstep at ps->PhysicalDpi now in
* - p48xxSetGeneralRegister
* - fixed the color-inverse problem for model OP4800
* - 0.37 - move p48xxOpenScanPath, p48xxCloseScanPath
* and p48xxRegisterToScanner to io.c
* - removed // comments
* - added override for A3I scanner
* - 0.38 - added function p48xxPutToIdleMode()
* - added function p48xxCalibration
* - 0.39 - added A3I stuff
* - 0.40 - disabled A3I stuff
* - 0.41 - no changes
* - 0.42 - changed include names
* - 0.43 - no changes
2003-09-24 14:08:01 +00:00
* .
* <hr>
* This file is part of the SANE package.
*
2003-09-24 14:08:01 +00:00
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
2003-09-24 14:08:01 +00:00
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
2003-09-24 14:08:01 +00:00
* Foundation, Inc., 59 Temple Place - Suite 330, Boston,
* MA 02111-1307, USA.
*
* As a special exception, the authors of SANE give permission for
* additional uses of the libraries contained in this release of SANE.
*
* The exception is that, if you link a SANE library with other files
* to produce an executable, this does not by itself cause the
* resulting executable to be covered by the GNU General Public
* License. Your use of that executable is in no way restricted on
* account of linking the SANE library code into it.
*
* This exception does not, however, invalidate any other reasons why
* the executable file might be covered by the GNU General Public
* License.
*
* If you submit changes to SANE to the maintainers to be included in
* a subsequent release, you agree by submitting the changes that
* those changes may be distributed with this exception intact.
*
* If you write modifications of your own for SANE, it is your choice
* whether to permit this exception to apply to your modifications.
* If you do not wish that, delete this exception notice.
* <hr>
*/
#include "plustek-pp_scan.h"
/*************************** some definitions ********************************/
#define _TEST_SZ 2048 /* always use 2048 for mem size (= one bank) */
#define _START_VAL 0x12345678 /* pick a non-zero starting value for our long */
#define _BankAndSizeForTest _MemBankSize2k /* always use 2k for mem test */
/*************************** local functions *********************************/
/*.............................................................................
* 1) Set asic to PROGRAM mode
* 2) Select the memory bank and size
* 3) Initiate data fifo
*/
static void p48xxSetMemoryBankForProgram( pScanData ps , Byte bBankAndSize )
{
/* enter program mode */
IODataToRegister( ps, ps->RegModeControl, _ModeProgram );
/* bank and size */
IODataToRegister( ps, ps->RegMemAccessControl, bBankAndSize );
/* initiate data fifo */
IORegisterToScanner( ps, ps->RegInitDataFifo );
}
/*.............................................................................
* use the internal memory of a scanner to find the model
*/
static int p48xxDoTest( pScanData ps )
{
UChar tmpByte;
int retval;
ULong adder, ul, cntr;
pULong buffer;
DBG( DBG_LOW, "p48xxDoTest()\n" );
buffer = _KALLOC( sizeof(UChar) * _TEST_SZ, GFP_KERNEL );
if( NULL == buffer )
return _E_ALLOC;
retval = _E_NO_DEV;
/*
* do a memory test to determine how much memory this unit has, in the
* process we can figure out if it's a 4830 or a 9630. NOTE: the ram
* seems to be mirrored such that if you have a unit with only 32k it's
* mirrored 4 times to fill the 128k (2k * (_MemBankMask + 1)) space,
* so we will run a 32 bit incrementing pattern over the entire 128k and
* look for the 1st page (2k) to fail
*/
adder = 0;
for (cntr = _BankAndSizeForTest;
cntr < _BankAndSizeForTest + _MemBanks; cntr++) {
ps->OpenScanPath( ps );
p48xxSetMemoryBankForProgram( ps, cntr );
/* prepare content, incrementing 32 val */
for (ul = 0; ul < _TEST_SZ / sizeof(ULong); ul++)
buffer[ul] = ul + adder + _START_VAL;
/* fill to buffer */
IOMoveDataToScanner( ps, (pUChar)buffer, _TEST_SZ );
/*
* now check bank 0 to see if it got overwritten
* bank 0, size 2k
*/
p48xxSetMemoryBankForProgram( ps, _BankAndSizeForTest );
ps->CloseScanPath( ps );
/* read data back */
IOReadScannerImageData( ps, (pUChar)buffer, _TEST_SZ );
/* check */
for (ul = 0; ul < _TEST_SZ / sizeof(ULong); ul++) {
if (buffer[ul] != ul + _START_VAL) {
break;
}
}
/* if fail */
if (ul != _TEST_SZ / sizeof (ULong)) {
DBG( DBG_LOW, "Bank 0 overwritten\n" );
break;
}
/* now check current bank */
ps->OpenScanPath( ps );
p48xxSetMemoryBankForProgram( ps, cntr );
ps->CloseScanPath( ps );
/* read data back */
IOReadScannerImageData( ps, (pUChar)buffer, _TEST_SZ);
/* check if fail */
for( ul = 0; ul < _TEST_SZ / sizeof(ULong); ul++ ) {
if( buffer[ul] != ul + adder + _START_VAL )
break;
}
/* check if fail */
if (ul != _TEST_SZ / sizeof(ULong)) {
2003-10-02 07:44:08 +00:00
DBG( DBG_LOW, "Bank not present, error at pos %lu (%lu)\n", ul,
(ULong)(_TEST_SZ / sizeof(ULong)));
break;
}
adder += _TEST_SZ / sizeof(ULong);
}
_KFREE( buffer );
DBG( DBG_LOW, "found %ld bytes of memory\n",
_TEST_SZ * (cntr - _BankAndSizeForTest));
if( cntr == _BankAndSizeForTest ) {
DBG( DBG_LOW, "No memory ! No scanner...\n" );
return retval;
}
#ifdef DEBUG
tmpByte = IODataRegisterFromScanner( ps, 0x18 );
DBG( DBG_LOW, "tmpByte[0x18] = 0x%02x\n",tmpByte );
#endif
tmpByte = IODataRegisterFromScanner( ps, 0x0e );
DBG( DBG_LOW, "tmpByte = 0x%02x, cntr = %lu, AsicId = 0x%02x\n",
tmpByte, cntr, ps->sCaps.AsicID );
/* 128k */
if ((_TEST_SZ * (cntr - _BankAndSizeForTest) == 1 << 17) &&
(ps->sCaps.AsicID == _ASIC_IS_96003)) {
/*
* if 128k then must be a 9630 or above
* hack, test for 12000P, The 9630 returns an 0x08
*/
if ( tmpByte == 0x02 ) {
/*
* as we currently can't automagically detect an A3I we have to
* use the override switch
*/
if( _OVR_PLUSTEK_A3I == ps->ModelOverride ) {
DBG( DBG_LOW, "Model Override --> A3I\n" );
ModelSetA3I( ps );
} else {
ModelSet12000( ps );
DBG( DBG_LOW, "It seems we have a 12000P/96000P\n" );
}
} else {
ModelSet9630( ps );
DBG( DBG_LOW, "It seems we have a 9630\n" );
}
retval = _OK;
} else {
DBG( DBG_LOW, "Scanner is not a 9630 or above\n");
if ( tmpByte != 0x0f ) {
DBG( DBG_LOW, "Looks like a 600!\n" );
if (( 0x08 == tmpByte ) &&
((_TEST_SZ * (cntr - _BankAndSizeForTest)) == 32768 )) {
DBG( DBG_LOW, "But it is a 4830P!!! "
"(by mkochano@ee.pw.edu.pl)\n" );
ModelSet4830( ps );
} else {
ModelSet600( ps );
}
}
#ifdef DEBUG
else
DBG( DBG_LOW, "It seems we have a 4830\n" );
#endif
retval = _OK;
}
return retval;
}
/*.............................................................................
* setup ASIC registers and clear all scan states (no stepping)
*/
static void p48xxSetAsicRegisters( pScanData ps )
{
memset( &ps->AsicReg, 0, sizeof(ps->AsicReg));
memset( &ps->Asic96Reg, 0, sizeof(ps->Asic96Reg));
memset( ps->a_nbNewAdrPointer, 0, _SCANSTATE_BYTES );
ps->AsicReg.RD_LineControl = ps->TimePerLine;
ps->AsicReg.RD_ScanControl = _SCAN_LAMP_ON;
ps->AsicReg.RD_ModelControl = ps->Device.ModelCtrl | _ModelWhiteIs0;
ps->AsicReg.RD_Origin = 0;
ps->AsicReg.RD_Pixels = 5110; /*ps->RdPix;*/
ps->Asic96Reg.RD_MotorControl = 0;
ps->Asic96Reg.RD_WatchDogControl = 0; /* org. val = 0x8f; */
IOPutOnAllRegisters( ps );
}
/*.............................................................................
* use the internal memory of a scanner to find the model
*/
static int p48xxCheck4800Memory( pScanData ps )
{
int retval;
ULong ul;
pUChar buffer;
DBG( DBG_LOW, "p48xxCheck4800Memory()\n" );
buffer = _KALLOC( 2560, GFP_KERNEL ); /* 1280: Read,1280:Write */
if( NULL == buffer )
return _E_ALLOC;
retval = _OK;
/* bank 0, size 2k */
ps->OpenScanPath( ps );
p48xxSetMemoryBankForProgram( ps, _BankAndSizeForTest );
for (ul = 0; ul < 1280; ul++)
buffer[ul] = (UChar)ul; /* prepare content */
IOMoveDataToScanner( ps, buffer, 1280 ); /* fill to buffer */
p48xxSetMemoryBankForProgram( ps, _BankAndSizeForTest );
ps->CloseScanPath( ps );
/* read data back */
IOReadScannerImageData( ps, buffer + 1280, 1280 );
for( ul = 0; ul < 1280; ul++ ) {
if( buffer[ul] != buffer[ul+1280] ) {
DBG( DBG_HIGH, "Error in memory test at pos %lu (%u != %u)\n",
ul, buffer[ul], buffer[ul+1280] );
retval = _E_NO_DEV;
break;
}
}
_KFREE(buffer);
return retval;
}
/*.............................................................................
* call all other modules, to initialize themselves
*/
static int p48xxInitAllModules( pScanData ps )
{
int result;
result = DacInitialize( ps );
if( _OK != result )
return result;
result = ImageInitialize( ps );
if( _OK != result )
return result;
result = IOFuncInitialize( ps );
if( _OK != result )
return result;
result = IOInitialize( ps );
if( _OK != result )
return result;
result = MotorInitialize( ps );
if( _OK != result )
return result;
/*
* in debug version, check all function pointers
*/
#ifdef DEBUG
if( _FALSE == MiscAllPointersSet( ps ))
return _E_INTERNAL;
#endif
return _OK;
}
/*.............................................................................
*
*/
static int p48xxReadWriteTest( pScanData ps )
{
int retval;
DBG( DBG_LOW, "p48xxReadWriteTest()\n" );
/*
* determine the model by the ASIC type (except for 4830/9630)
* might want to make a SetModelCommon() someday for this...
*/
ps->RedDataReady = 0x01; /* normal for Red and Green */
ps->GreenDataReady = 0x02;
ps->AsicRedColor = 0x01;
ps->AsicGreenColor = 0x03;
/*
* if not already set, try to find ASIC type (96001 or 96003)
*/
if ( _NO_BASE == ps->sCaps.wIOBase ) {
/* get copy of asic id */
ps->sCaps.AsicID = IODataRegisterFromScanner( ps, ps->RegAsicID );
if ( _ASIC_IS_96003 == ps->sCaps.AsicID ) {
/* actually either a 4830, 9630, 12000, find out later */
DBG( DBG_LOW, "Found a 96003 ASIC at Reg 0x%x\n", ps->RegAsicID );
ModelSet4830( ps );
} else {
if ( _ASIC_IS_96001 == ps->sCaps.AsicID ) {
DBG( DBG_LOW, "Found a 96001 ASIC at Reg 0x%x\n",
ps->RegAsicID );
ModelSet4800( ps );
} else {
DBG( DBG_LOW, "Can't find your model, asic = 0x%x\n",
ps->sCaps.AsicID );
return _E_NO_ASIC;
}
}
}
/*
* set the registers according to the assumptions above
*/
p48xxSetAsicRegisters( ps );
if ( _ASIC_IS_96003 == ps->sCaps.AsicID ) {
retval = p48xxDoTest( ps );
/*
* as we may now have detected another model, we have to set
* the registers to their new values...
* and maybe the modules have to be reset as well
*/
if( _OK == retval ) {
p48xxSetAsicRegisters( ps );
retval = p48xxInitAllModules( ps );
}
return retval;
}
/*
* this part will be reached only for the 4800 - ASIC 96001
* we check only the memory as the original driver does
*/
return p48xxCheck4800Memory( ps );
}
/*.............................................................................
* 1) Setup the registers of asic.
* 2) Determine which type of CCD we are using
* 3) According to the CCD, prepare the CCD dependent veriables
* SONY CCD:
* The color exposure sequence: Red, Green (after 11 red lines),
* Blue (after 8 green lines)
* TOSHIBA CCD:
* The color exposure sequence: Red, Blue (after 11 red lines),
* Green (after 8 blue lines)
*/
static void p48xxSetupScannerVariables( pScanData ps )
{
UChar tmp;
TimerDef timer;
DBG( DBG_LOW, "p48xxSetupScannerVariables()\n" );
ps->OpenScanPath( ps );
IODataToRegister( ps, ps->RegModelControl2, _Model2ChannelMult );
if( 2 == IODataFromRegister( ps, ps->RegWriteIOBusDecode1 )) {
DBG( DBG_LOW, "Scanner has 97003 ASIC too.\n" );
ps->f97003 = _TRUE;
ps->b97003DarkR = 8;
ps->b97003DarkG = 8;
ps->b97003DarkB = 8;
ps->Asic96Reg.u26.RD_ModelControl2 = _Model2ChannelMult;
} else {
DBG( DBG_LOW, "No ASIC 97003 found.\n" );
ps->f97003 = _FALSE;
ps->Asic96Reg.u26.RD_ModelControl2 = _Model2DirectOutPort;
}
IODataToRegister( ps, ps->RegModelControl2,
ps->Asic96Reg.u26.RD_ModelControl2 );
tmp = IODataFromRegister( ps, ps->RegStatus );
DBG( DBG_LOW, "Status-Register = 0x%02X\n", tmp );
#ifdef DEBUG
if( tmp & _FLAG_P96_MOTORTYPE ) {
DBG( DBG_LOW, "Scanner has Full/Half Stepping drive\n" );
} else {
DBG( DBG_LOW, "Scanner has Micro Stepping drive\n" );
}
#endif
if( tmp & _FLAG_P96_CCDTYPE) {
ps->fSonyCCD = _FALSE;
DBG( DBG_LOW, "CCD is NEC/TOSHIBA Type\n" );
} else {
ps->fSonyCCD = _TRUE;
DBG( DBG_LOW, "CCD is SONY Type\n" );
}
ps->CloseScanPath( ps );
ps->b1stColorByte = ps->AsicRedColor;
ps->b1stColor = ps->RedDataReady;
if (ps->fSonyCCD) {
ps->b2ndColorByte = ps->AsicGreenColor;
ps->b2ndColor = ps->GreenDataReady;
ps->b3rdColorByte = _ASIC_BLUECOLOR;
ps->b3rdColor = _BLUE_DATA_READY;
} else { /* NEC/Toshiba CCD */
ps->b2ndColorByte = _ASIC_BLUECOLOR;
ps->b2ndColor = _BLUE_DATA_READY;
ps->b3rdColorByte = ps->AsicGreenColor;
ps->b3rdColor = ps->GreenDataReady;
}
ps->b1stMask = (Byte)~ps->b1stColor;
ps->b2ndMask = (Byte)~ps->b2ndColor;
ps->b3rdMask = (Byte)~ps->b3rdColor;
ps->b1stLinesOffset = 17;
ps->b2ndLinesOffset = 9;
/*
* calculate I/O Timer
* if we cannot read 200 lines within 1 second, the I/O time has to add 2
* CalculateIOTime ()
*/
if( _PORT_SPP != ps->IO.portMode ) {
UShort wLines = 200;
pUChar pBuf;
pBuf = _KALLOC((_BUF_SIZE_BASE_CONST * 2), GFP_KERNEL );
if ( NULL != pBuf ) {
MiscStartTimer( &timer, _SECOND );
do {
IOReadScannerImageData( ps, pBuf, (_BUF_SIZE_BASE_CONST * 2));
wLines--;
} while (!MiscCheckTimer( &timer) && wLines);
if( !wLines )
ps->bExtraAdd = 0;
else
ps->bExtraAdd = 2;
_KFREE( pBuf );
} else {
ps->bExtraAdd = 2; /* poor resource */
}
} else {
ps->bExtraAdd = 0;
}
}
/*.............................................................................
*
*/
static void p48xxSetGeneralRegister( pScanData ps )
{
if( MODEL_OP_A3I == ps->sCaps.Model ) {
ps->AsicReg.RD_ModelControl = _ModelDpi400 | _ModelWhiteIs0 |
_ModelMemSize128k4;
}
ps->AsicReg.RD_ModeControl = _ModeScan;
/* WORK: ps->PhysicalDpi should be correct, but the we have to work
* on motor.c again to use other running-tables
* if ( ps->DataInf.xyAppDpi.y <= ps->PhysicalDpi ) {
*/
if ( ps->DataInf.xyAppDpi.y <= 300 ) {
/* HEINER:A3I
if ( ps->DataInf.xyAppDpi.y <= ps->PhysicalDpi ) {
*/
ps->Asic96Reg.RD_MotorControl = (ps->FullStep | ps->IgnorePF |
ps->MotorOn | _MotorDirForward);
} else {
ps->Asic96Reg.RD_MotorControl = (ps->IgnorePF | ps->MotorOn |
_MotorDirForward);
}
if ( ps->DataInf.wPhyDataType == COLOR_BW ) {
ps->AsicReg.RD_ScanControl = ps->bLampOn;
if (!(ps->DataInf.dwScanFlag & SCANDEF_Inverse))
ps->AsicReg.RD_ScanControl |= _P96_SCANDATA_INVERT;
} else {
ps->AsicReg.RD_ScanControl = ps->bLampOn | _SCAN_BYTEMODE;
if (ps->DataInf.dwScanFlag & SCANDEF_Inverse)
ps->AsicReg.RD_ScanControl |= _P96_SCANDATA_INVERT;
}
if (ps->DataInf.xyPhyDpi.x <= 200)
ps->AsicReg.RD_ScanControl |= _SCAN_1ST_AVERAGE;
DBG( DBG_LOW, "RD_ModeControl = 0x%02x\n", ps->AsicReg.RD_ModeControl );
DBG( DBG_LOW, "RD_MotorControl = 0x%02x\n", ps->Asic96Reg.RD_MotorControl );
DBG( DBG_LOW, "RD_ScanControl = 0x%02x\n", ps->AsicReg.RD_ScanControl );
}
/*.............................................................................
*
*/
static void p48xxSetupScanningCondition( pScanData ps )
{
DBG( DBG_LOW, "p48xxSetupScanningCondition()\n" );
IORegisterDirectToScanner( ps, ps->RegInitDataFifo );
/* Cal64kTime (); */
if( MODEL_OP_A3I == ps->sCaps.Model )
ps->wLinesPer64kTime = (UShort)(65555UL / ps->DataInf.dwAsicBytesPerPlane *
5UL);
else
ps->wLinesPer64kTime = (UShort)(65555UL / ps->DataInf.dwAsicBytesPerPlane *
10UL / 3UL);
DBG( DBG_LOW, "wLinesPer64kTime = %u\n", ps->wLinesPer64kTime );
ps->InitialSetCurrentSpeed( ps );
DBG( DBG_LOW, "Current Speed = %u\n", ps->bCurrentSpeed );
ps->bMinReadFifo = (Byte)((ps->DataInf.dwAsicBytesPerPlane + 511) / 512);
DBG( DBG_LOW, "MinReadFifo = %u\n", ps->bMinReadFifo );
p48xxSetGeneralRegister( ps );
/*
* if speed is not the fastest and DPI is less than 400, do half steps
*/
if( ps->DataInf.wPhyDataType >= COLOR_256GRAY &&
!(ps->bCurrentSpeed & 1) && (ps->DataInf.xyAppDpi.y <= 300)) {
/* HEINER:A3I
if( !(ps->bCurrentSpeed & 1) && (ps->DataInf.xyAppDpi.y <= ps->PhysicalDpi)) {
*/
ps->fHalfStepTableFlag = _TRUE;
ps->Asic96Reg.RD_MotorControl &= ps->StepMask;
}
ps->AsicReg.RD_Dpi = ps->DataInf.xyPhyDpi.x;
DBG( DBG_LOW, "RD_Dpi = %u\n", ps->AsicReg.RD_Dpi );
/* SetStartStopRegister (ps) */
ps->AsicReg.RD_Origin = (UShort)(ps->Offset70 + ps->Device.DataOriginX +
ps->DataInf.crImage.x);
if (ps->DataInf.wPhyDataType < COLOR_256GRAY) {
ps->AsicReg.RD_Pixels =
(UShort)(ps->DataInf.dwAsicPixelsPerPlane + 7) & 0xfff8;
} else {
ps->AsicReg.RD_Pixels = (UShort)ps->DataInf.dwAsicPixelsPerPlane;
}
DBG( DBG_LOW, "RD_Pixels = %u\n", ps->AsicReg.RD_Pixels );
/* SetupMotorStart () */
IORegisterDirectToScanner( ps, ps->RegInitDataFifo);
ps->SetupMotorRunTable( ps );
IOSetToMotorRegister( ps );
ps->pCurrentColorRunTable = ps->pColorRunTable;
ps->bCurrentLineCount = 0;
IOPutOnAllRegisters( ps );
ps->OpenScanPath( ps );
/*
* when using the full-step speed on 600 dpi models, then set
* the motor into half-step mode, to avoid that the scanner hits
* the back of its cover
*/
if((600 == ps->PhysicalDpi) && (1 == ps->bCurrentSpeed)) {
ps->Asic96Reg.RD_MotorControl &= ~ps->FullStep;
}
IODataToRegister( ps, ps->RegMotorControl,
(Byte)(ps->Asic96Reg.RD_MotorControl & ~ps->MotorOn));
IODataToRegister( ps, ps->RegMotorControl, ps->Asic96Reg.RD_MotorControl);
IORegisterToScanner( ps, ps->RegInitDataFifo );
ps->CloseScanPath( ps );
}
/*.............................................................................
* switch the motor off and put the scanner into idle mode
*/
static void p48xxPutToIdleMode( pScanData ps )
{
DBG( DBG_LOW, "Putting Scanner (ASIC 96001/3) into Idle-Mode\n" );
/*
* turn off motor
*/
ps->Asic96Reg.RD_MotorControl = 0;
IOCmdRegisterToScanner( ps, ps->RegMotorControl, 0 );
}
/*.............................................................................
* for P96001/3 ASIC
* do all the preliminary stuff here (calibrate the scanner and move the
* sensor to it<EFBFBD>s start position, also setup the driver for the
* current run)
*/
static int p48xxCalibration( pScanData ps )
{
DBG( DBG_LOW, "p48xxCalibration()\n" );
ps->Scan.bFifoSelect = ps->RegGFifoOffset;
while (_TRUE) {
_ASSERT(ps->WaitForShading);
if (ps->WaitForShading( ps )) {
if(!(ps->DataInf.dwScanFlag & SCANDEF_TPA)) {
/* HEINER:A3I disable !! */
MotorP96AheadToDarkArea( ps );
if( ps->Scan.fRefreshState ) {
ps->Scan.fRefreshState = _FALSE;
if (!ps->fReshaded) {
ps->fReshaded = _TRUE;
if (ps->fColorMoreRedFlag || ps->fColorMoreBlueFlag) {
continue;
}
}
}
}
break;
} else {
ps->fScanningStatus = _FALSE;
ps->DataInf.dwAppLinesPerArea = 0;
return _E_TIMEOUT;
}
}
if((ps->sCaps.AsicID != _ASIC_IS_96001) &&
(ps->DataInf.wPhyDataType != COLOR_BW)) {
DacP96WriteBackToGammaShadingRAM(ps);
}
if( ps->DataInf.dwScanFlag & SCANDEF_TPA ) {
ps->bExtraMotorCtrl = 0;
ps->Scan.fMotorBackward = _TRUE;
MotorP96ConstantMoveProc( ps, 4000 );
}
/*
* move sensor and setup scanner for grabbing the picture
*/
_ASSERT(ps->WaitForPositionY);
ps->WaitForPositionY(ps);
return _OK;
}
/************************ exported functions *********************************/
/*.............................................................................
* initialize the register values and function calls for the 96001/3 asic
*/
2003-09-24 14:08:01 +00:00
_LOC int P48xxInitAsic( pScanData ps )
{
DBG( DBG_LOW, "P48xxInitAsic()\n" );
ps->IO.bOpenCount = 0;
ps->RegSwitchBus = 0;
ps->RegReadDataMode = 1;
ps->RegWriteDataMode = 2;
ps->RegEPPEnable = 3;
ps->RegInitDataFifo = 4;
ps->RegForceStep = 5;
ps->RegInitScanState = 6;
ps->RegRefreshScanState = 7;
ps->RegStatus = 0x10;
ps->RegFifoOffset = 0x11;
ps->RegGetScanState = 0x12;
ps->RegAsicID = 0x13; /* Determine the asic */
ps->RegReadIOBufBus = 0x17;
ps->RegModeControl = 0x18;
ps->RegLineControl = 0x19;
ps->RegScanControl = 0x1a;
ps->RegMotorControl = 0x1b;
ps->RegModelControl = 0x1c;
ps->RegMemAccessControl = 0x1d;
ps->RegDpiLow = 0x1e;
ps->RegDpiHigh = 0x1f;
ps->RegScanPosLow = 0x20;
ps->RegScanPosHigh = 0x21;
ps->RegWidthPixelsLow = 0x22;
ps->RegWidthPixelsHigh = 0x23;
ps->RegThresholdControl = 0x24;
ps->RegWatchDogControl = 0x25;
ps->RegModelControl2 = 0x26;
ps->RegThresholdGapControl = 0x27;
ps->RegRedChShadingOffset = 0x28;
ps->RegGreenChShadingOffset = 0x29;
ps->RegRedDCAdjust = 0x27; /* not sure why these are dup's */
ps->RegGreenDCAdjust = 0x28;
ps->RegBlueDCAdjust = 0x29;
ps->RegBlueChShadingOffset = 0x2a;
ps->RegRedChDarkOffset = 0x2b;
ps->RegGreenChDarkOffset = 0x2c;
ps->RegBlueChDarkOffset = 0x2d;
ps->RegWriteIOBusDecode1 = 0x2e;
ps->RegWriteIOBusDecode2 = 0x2f;
ps->RegScanStateControl = 0x30;
ps->RegRedChEvenOffset = 0x31;
ps->RegGreenChEvenOffset = 0x32;
ps->RegBlueChEvenOffset = 0x33;
ps->RegRedChOddOffset = 0x34;
ps->RegGreenChOddOffset = 0x35;
ps->RegBlueChOddOffset = 0x36;
ps->RegRedGainOutDirect = 0x37;
ps->RegGreenGainOutDirect = 0x38;
ps->RegBlueGainOutDirect = 0x39;
ps->RegLedControl = 0x3a;
ps->RegShadingCorrectCtrl = 0x3b;
ps->RegScanStateBegin = 0x40; /* (0, 1) */
ps->RegScanStateEnd = 0x5f; /* (62, 63) */
/*
* setup function calls
*/
ps->ReadWriteTest = p48xxReadWriteTest;
ps->SetupScannerVariables = p48xxSetupScannerVariables;
ps->SetupScanningCondition = p48xxSetupScanningCondition;
ps->PutToIdleMode = p48xxPutToIdleMode;
ps->Calibration = p48xxCalibration;
/*
* setup misc
*/
ps->CtrlReadHighNibble = _CTRL_GENSIGNAL + _CTRL_AUTOLF;
ps->CtrlReadLowNibble = _CTRL_GENSIGNAL + _CTRL_AUTOLF + _CTRL_STROBE;
ps->MotorFreeRun = 0x80;
ps->bLampOn = _SCAN_LAMP_ON;
ps->f97003 = _FALSE;
/*
* initialize the other modules
*/
return p48xxInitAllModules( ps );
}
/* END PLUSTEK-PP_P48xx.C ...................................................*/