mirror
/
sane-project-backends
kopia lustrzana https://gitlab.com/sane-project/backends
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
sane-project-backends/ChangeLog-1.0.0

4310 wiersze
143 KiB
Plaintext
Czysty Zwykły widok Historia

Splitted ChangeLog to limit filesize. Editing became slow on smaller systems. Henning Meier-Geinitz <henning@meier-geinitz.de>
2002-01-09 19:43:51 +00:00
1998-11-21 David Mosberger-Tang <David.Mosberger@acm.org>
* Version 1.0 released
* From Brian J. Murrell:
* backend/dll.conf: Mention dc210.
* backend/cderror.h: New file.
* backend/jinclude.h: Ditto.
* backend/djpeg.c: Ditto.
* backend/dc210.desc: Ditto.
* backend/dc210.h: Ditto.
* backend/dc210.c: Ditto.
* backend/cdjpeg.h: Ditto.
* doc/Makefile.in (SECT5): Mention sane-abaton.5.
* doc/sane-abaton.man: New file.
* backend/abaton.c: Ditto.
(wait_ready): Explicitly cost tv_sec member to (long) in order
to print it (avoids warning on platforms where tv_sec is not a long).
* backend/abaton.h: Ditto.
* backend/abaton.conf: Ditto.
* backend/abaton.desc: Ditto.
* backend/dll.conf: Mention abaton.
* Apollo/DomainOS fixes by Paul Walker:
* sanei/sanei_DomainOS.h: Add this missing file.
* sanei/sanei_config2.c: Include <sane/config.h> to get
u_char defined if necessary.
* sanei/sanei_DomainOS.c (upper_string): Delete.
(do_help): Ditto.
* include/sane/config.h.in: Add #undef HAVE_SYS_TIME_H.
* lib/usleep.c [HAVE_SYS_TIME_H]: Include <sys/time.h> only if
we have it.
* configure.in (CPPFLAGS): Check for sys/time.h.
* frontend/gtkglue.c: Move include of <sys/types.h> in front
of include of <sys/stat.h>.
* config.sub: Apply patch to recognize -sys5.3.
* backend/microtek.c: Applied Matto's latest patch to upgrade
backend from v0.9 to v0.10.
1998-11-04 David Mosberger-Tang <David.Mosberger@acm.org>
* backend/microtek2.desc: Mention ScanMaker X6 and Phantom 636.
* backend/microtek2.c (check_inquiry): Mention Phantom 636 in
model string.
1998-11-03 David Mosberger-Tang <David.Mosberger@acm.org>
* backend/microtek2.c (check_inquiry): Added patch by Sebastian
Erdmann <serdmann@cs.tu-berlin.de> to recognize ScanMaker X6.
1998-11-02 David Mosberger-Tang <David.Mosberger@acm.org>
* backend/artec.c: Print size_t as recommended in backend/GUIDE.
1998-11-02 Chris Pinkham <cpinkham@infi.net>
* backend/artec.c: changes to correct bugs when using AT12.
(sense_handler): New function (by Dick Bruijn).
(wait_ready): Ditto (by Dick Bruijn).
(abort_scan): Ditto (by Dick Bruijn).
Support added to read capability data from scanner if the model.
Supports this command (by Dick Bruijn).
Added call to sanei_scsi_close() if detected scanner is not
a Artec/Ultima model (by Francois Ouellet).
Added Negative option. Added Halftone Pattern option.
Added Filter Type option for mono scans.
Added Quality Calibration option.
Moved test_unit_ready command till AFTER we check for ULTIMA scanner.
1998-11-02 David Mosberger-Tang <David.Mosberger@acm.org>
* config.guess: Upgrade to libtool v1.2.
* config.sub: Ditto.
* ltconfig: Ditto.
* ltmain.sh: Ditto.
1998-10-29 David Mosberger-Tang <David.Mosberger@acm.org>
* backend/mustek.c (encode_resolution): If MUSTEK_FLAG_DOUBLE_RES
is set, use resultion encoding reported by
<Heiko_Schroeder@t-online.de>
(attach): Set MUSTEK_FLAG_DOUBLE_RES for MSF-06000CZ. Do other
models need this, too?
(calibration): Declare NUM as size_t, not int. #ifdef out this
unused routine.
(reader_process): Print size_t values as %lu with explicit cast
to u_long.
* backend/mustek.h (MUSTEK_FLAG_DOUBLE_RES): New flag.
* backend/mustek.c (init_options): Initialize resolution with 18
dpi, not 100dpi so that "scanimage" without options gives a
preview-quality image that doesn't take much space or time.
* backend/mustek.c: Updated with Andreas Bolsch's version (adds
support for SE models).
* backend/mustek.h: Ditto.
* backend/mustek.spec: Ditto.
* backend/pnm.c (sane_read): Replace C++ comment with C comment.
* backend/microtek2.c: Updated with Bernd's v0.5.
* backend/microtek2.h: Ditto.
* backend/microtek2.conf: Ditto.
* backend/umax.c: Updated with Oliver's latest version.
* backend/umax.h: Ditto.
* backend/umax-scsidef.h: Ditto.
* backend/umax-scanner.h: Ditto.
* backend/umax-uc630.h: Ditto.
* backend/umax-uc840.h: Ditto.
* backend/umax-ug630.h: Ditto.
* backend/umax-ug80.h: Ditto.
* backend/umax-uc1200s.h: Ditto.
* backend/umax-uc1200se.h: Ditto.
* backend/umax-uc1260.h: Ditto.
* backend/umax.conf: Ditto.
* include/sane/saneopts.h: Ditto.
* doc/sane-umax-doc.html: Ditto.
* doc/sane-umax-doc.tex: Ditto.
* doc/sane-umax.man: Ditto.
1998-10-28 David Mosberger-Tang <David.Mosberger@acm.org>
* doc/sane.tex (subsection{sane_control_option}): Clarify that
paramter "v" is ignored for SET_AUTO calls.
* frontend/saned.c (init): Initialize w->version.
* backend/net.c (connect_dev): Accept version code 2 and
set peer's version code in dev->wire.version.
* include/sane/sanei_wire.h: New member "version".
* sanei/sanei_net.c (sanei_w_control_option_req): Encode
option value only if peer_version is < 3 or if action is
not SANE_ACTION_SET_AUTO.
* include/sane/sanei_net.h (SANEI_NET_PROTOCOL_VERSION): Up
protocol version to version 3.
* sanei/sanei_net.c (sanei_w_control_option_req): Transcode
value_type, value_size, and value only if req->action !=
SANE_ACTION_SET_AUTO. Reported by Petter Reinholdtsen.
Patches by Petter Reinholdtsen <pere@hungry.com>:
* backend/dmc.c (attach_one): Don't use C++-style comments.
* backend/dc25.h (DEFAULT_TTY_BAUD): New macro. Move SPEEDS macro
to dc25.c.
* backend/dc25.c: Initialize tty_baud to DEFAULT_TTY_BAUD. Use
B57600 and B115200 only if defined.
* doc/saned.man: Mention that hostname matching no longer is case
significant.
* configure.in
(lib/Makefile.in,lib/strcasecmp.c,frontend/saned.c): Use
strcasecmp() instead of strcmp to compare DNS hostnames. Case is
irrelevant when using DNS.
* backend/dll.c: Add support for HP-UX 10.xx style shared
libs.
* configure.in include/sane/config.h.in backends/dll.c:
Use dhl_load() family for DLL support on HP/UX.
* backend/snapscan.c (sane_snapscan_open): Don't cast lvalue
(illegal according to ANSI C, I think).
* backend/apple.c (init_options): Add explicit "break" after
"default:" to make HP-UX compiler happy (?).
(sane_read): Make stuff after #endif a comment.
* backend/agfafocus.c: New file (by Karl Anders Oygard
<karlo@opera.no>).
* backend/agfafocus.h: Ditto.
* doc/sane-agfafocus.man: Ditto.
* doc/sane-net.man: Fix typo: network service is called "sane",
not "saned" (by Andreas Dilger <adilger@enel.ucalgary.ca>).
* backend/hp-scl.c (sanei_hp_scsi_pipeout): Use SIGPWR only if its
defined (by Peter Kirchgessner).
* frontend/Makefile.in (INCLUDES): Mention @GTK_CFLAGS@ as part of
INCLUDES macro instead of CFLAGS. Despite its name, @GTK_CFLAGS@
is guaranteed to contain CPP include directives only. (Reported
by Kevin Dalley <kevind@rahul.net>.)
1998-10-27 David Mosberger-Tang <David.Mosberger@acm.org>
* sanei/sanei_scsi.c (sanei_scsi_open): Return
SANE_STATUS_ACCESS_DENIED if open() fails with errno==EACCES.
* backend/ricoh-scsi.c: #ifdef out unused code and print values of
type size_t as prescribed in the file backend/GUIDE.
* backend/dll.conf: Mention Ricoh backend.
* backend/ricoh.c: New file (by Ricoh Dillema).
* backend/ricoh.h: Ditto..
* backend/ricoh-scsi.c: Ditto..
* backend/microtek.c: Apply Aug 7 patch by Matto Marjanovic.
* backend/dc25.c: Apply patch by Peter Fales (v1.1).
* backend/dc25.desc: Ditto.
* doc/sane-dc25.man: Ditto.
* backend/pnm.c: Applied patch by Goran Thyni <goran@bildbasen.se>
that allows scanning parts of a PNM image.
* backend/GUIDE: Add Matto's comment on .desc files.
* backend/hp.c: New file from Peter Kirch (formerly known as xhp).
* backend/hp.h: Ditto.
* backend/hp-accessor.h: Ditto.
* backend/hp-device.h: Ditto.
* backend/hp-handle.h: Ditto.
* backend/hp-option.h: Ditto.
* backend/hp-scl.h: Ditto.
* backend/hp-scsi.h: Ditto.
* backend/hp-accessor.c: Ditto.
* backend/hp-device.c: Ditto.
* backend/hp-handle.c: Ditto.
* backend/hp-hpmem.c: Ditto.
* backend/hp-option.c: Ditto.
* backend/hp-scl.c: Ditto.
* backend/Makefile.in (libsane-hp.la): Make libsane-hp.la
dependent upon hp-accessor.lo, hp-device.lo, hp-handle.lo,
hp-hpmem.lo, hp-option.lo, and hp-scl.lo.
1998-10-22 David Mosberger-Tang <David.Mosberger@acm.org>
* doc/sane-hp.man (Model): Mention HP6200 as per report by Tom
Martone <tommartone@erols.com>.
1998-07-30 David Mosberger-Tang <David.Mosberger@acm.org>
* include/sane/config.h.in: Apply Cory Kempf's
<ckempf@enigami.com> FreeBSD CAM support patch.
* sanei/sanei_scsi.c: Ditto.
* tools/find-scanner.c: Ditto.
* configure.in: Ditto.
1998-07-27 David Mosberger-Tang <David.Mosberger@acm.org>
* Version 0.74 released.
* configure.in (CPPFLAGS): Save old CPPFLAGS in saved_CPPFLAGS and
then set CPPFLAGS (not saved_CPPFLAGS!) to include GTK_CFLAGS.
This should get GIMP detected again.
* frontend/xscanimage.c (init): Add missing newline.
* backend/net.c (sane_init): Look for service "sane", not "saned".
* configure.in (V_MINOR): Make it 74.
* tools/sane-desc.el: Hack a bit so sane-backends.html can be
generated some place other than the working directory
(which may not be writable).
* tools/sane-desc.el: New file by Matto.
* doc/Makefile.in (sane-backends-html): New rule to generate
sane-backends.html.
* backend/apple.desc: List sane-apple man page.
* backend/umax.c: Updated with Oliver's latest version (with Irix
4MB workaround).
* backend/microtek.c: Updated with Matto's v0.9.
* backend/microtek.h: Ditto.
* backend/microtek.conf: Ditto.
* backend/microtek.desc: Ditto.
* doc/sane-microtek.man: Ditto.
* backend/apple.h: Updated with Milon's v0.3.
* backend/apple.c: Ditto.
* doc/sane-apple.man: New file (contributed by Milon Firirkis).
1998-07-23 David Mosberger-Tang <David.Mosberger@acm.org>
* backend/canon-scsi.c (reserve_unit): Don't compile unused
reserve_unit().
* sanei/sanei_scsi.c: Apply Yuri's patch to add
sanei_scsi_find_devices() support to OS/2.
* sanei/sanei_pio.c: Include <sane/sanei_backend.h> instead of
just <sanei/sanei_debug.h> so we pick up #define's for inb and
out.
* include/sane/config.h.in: Mention HAVE_OS2_H and
HAVE_SYS_TYPES_H.
* configure.in (AC_CHECK_HEADERS): Mention sys/hw.h and
sys/types.h.
(AC_CHECK_LIB): Check for syslog.
(AC_CHECK_FUNCS): Check for _portaccess.
(CPPFLAGS): Don't disable qcam backend if we have _portaccess.
These patches contributed by Yuri for the benefit of OS/2.
* backend/qcam.c (qc_unlock) [!F_SETLK]: Fall back to convention
UNIX-style locking using O_EXCL (not ideal, but better than
nothing at all).
(qc_lock_wait): Ditto.
* sanei/sanei_scsi.c (KillDomainServer): Add missing paren.
* lib/usleep.c [HAVE_SYS_SELECT_H]: Include <sys/select.h>.
* include/sane/sanei_backend.h: Define i/o-port access
compatibility macros (by Yuri Dario).
* backend/Makefile.in (CONFIGS): Mention dummy saned.conf
(this really ought to go in frontend/Makefile, but I'm too lazy to
add a configuration-install rule there...).
* backend/coolscan.c: Update with Didier's latest version.
(send_one_LUT): Merge in alloca() fix from 1998-04-04.
1998-07-22 David Mosberger-Tang <David.Mosberger@acm.org>
* backend/dll.conf: Mention artec backend.
* backend/mustek.c (sane_start): Remove duplicate status test.
1998-07-21 David Mosberger-Tang <David.Mosberger@acm.org>
* frontend/saned.c (main): Look for service name "sane", not
"saned".
1998-07-20 David Mosberger-Tang <David.Mosberger@acm.org>
* backend/epson.c (epson_cmd): Add patch by Holger Frahm
<frahm@itp.uni-hannover.de> to support GT9500.
* backend/microtek.c: Update with latest version (v0.8).
* backend/artec.c (PREFER_PIXEL_MODE): Apply Chris Pinkham's
6/4/98 patch to add preliminary support for AT6 and AT12 scanner
models.
* backend/epson.c: Apply Christian Bucher's patch.
* backend/dc25.h: New file (by Peter Fales <psfales@earthling.net>)
* backend/dc25.c: Ditto.
* backend/dc25.conf: Ditto.
* doc/sane-dc25.man: Ditto.
* backend/microtek2.c: Replace dynamically sized array with
alloca() to be ANSI C compliant.
* backend/epson.c: Replace zero-sized byte arrays with 1 byte
arrays to be ANSI C compliant.
* doc/sane-hp.man: Mention ScanJet 3P (reported by Patrick Debois
<Patrick.Debois@lin.vlaanderen.be>).
* backend/umax.c: Updated with Oliver's 5/7/98 patch.
1998-07-20 Chris Pinkham <cpinkham@infi.net>
* backend/artec.c: Added code to default to using millimeters
instead of pixels for measurements, can revert to pixels by
defining PREFER_PIXEL_MODE at compilation time.
Added code to cause sane_read to block until data available to return,
also buffers as much data as possible before returning.
Added code to cause sane_read to read as much data from scanner as
possible for each call, previously would read 1 line max from
scanner.
Added code to attempt to detect scanner capabilities from scanner
if scanner supports this command, it not program has defaults
coded in for certain scanner models.
Separated horizontal and vertical resolution settings with ability
to bind them together. This still has a bug, so the option is is
disabled by default until I can get it working correctly.
Bug-fixes to get backend working properly with xscanimage.
Added preview mode option.
Added threshold option.
* backend/artec.h: Added options codes to go along with options
added in artec.c file.
1998-07-20 David Mosberger-Tang <David.Mosberger@acm.org>
* backend/epson.c (scsi_write): Apply patch by Thomas Bogendoerfer
<tsbogend@alpha.franken.de> to get Epson backend to work for SCSI
scanners again.
1998-06-05 David Mosberger-Tang <David.Mosberger@acm.org>
* backend/mustek.c (attach): Move dev_wait_ready() after the check
for a Mustek scanner. This is to make sure we don't issue any
command other than INQUIRY to SCSI devices that are not known to
be Mustek scanners.
1998-05-22 David Mosberger-Tang <David.Mosberger@acm.org>
* backend/dmc.c: Updated with David Skoll's latest patch.
* sanei/sanei_scsi.c (sanei_scsi_find_devices): Declare missing
findtype arg for dummy sanei_scsi_find_devices().
1998-05-16 David Mosberger-Tang <David.Mosberger@acm.org>
* backend/hp.c (attach): Return right after INQUIRY if the device
doesn't look like an HP scanner.
1998-05-15 David Mosberger-Tang <David.Mosberger@acm.org>
* Version 0.73 released.
* backend/mustek.c (attach): Initialize *devp to 0.
* configure.in: Use AM_PATH_GTK to figure out if/how to compile
with gtk libs.
* aclocal.m4: Include gtk.m4 from gtk-1.0.1 distribution.
* backend/Makefile.in (install): Change install rule so there is
guaranteed to be a (symlink) of the form
libsane-$(BACKEND).so.$(V_MAJOR) pointing to the right version
of a dll.
* backend/dll.c (load): Get rid of .la parsing non-sense. Instead,
always attempt to open libsane-$(BACKEND).so.$(V_MAJOR).
* backend/mustek.c (sane_init): Make sure empty lines really
are ignored.
1998-05-13 David Mosberger-Tang <David.Mosberger@acm.org>
* backend/microtek2.conf: Add line "scsi * * Scanner".
* backend/microtek.conf: Ditto.
* sanei/sanei_scsi.c (get_devicename): New function.
* sanei/sanei_config2.c: New file.
* sanei/Makefile.in (LIBSANEI_OBJS): Mention sanei_config2.
(LIBSANEI_LTOBJS): Ditto.
* sanei/sanei_scsi.c (sanei_scsi_find_devices): New function
(comes in two flavors: one for Linux, one for the remaining
platforms).
* include/sane/sanei_scsi.h: New function.
* doc/sane-dll.man: Fix to make it work with man2html (use
\- instead of -).
* doc/sane-dmc.man: Ditto.
* doc/sane-epson.man: Ditto.
* doc/sane-hp.man: Ditto.
* doc/sane-microtek.man: Ditto.
* doc/sane-microtek2.man: Ditto.
* doc/sane-mustek.man: Ditto.
* doc/sane-pint.man: Ditto.
* doc/sane-scsi.man: Ditto.
* doc/sane-umax.man: Ditto.
* doc/saned.man: Ditto.
* doc/scanimage.man: Ditto.
* doc/xscanimage.man: Ditto.
* doc/Makefile.in (MAN2HTML): New macro.
(html-man): New rule to generate HTML version of man-pages.
* configure.in (V_MINOR): Up to 73.
* backend/umax.conf: Add lines "scsi UMAX" and "scsi LinoHell
Office".
* backend/microtek2.h: New file (by Bernd Schroeder
<bernd@aquila.muc.de>).
* backend/microtek2.c: Ditto.
* backend/microtek2.conf: Ditto.
* backend/dll.conf: Mention "microtek2".
* backend/apple.conf: Add line "scsi APPLE".
* backend/mustek.conf: Add lines for "scsi MUSTEK" and "scsi
SCANNER".
* backend/apple.c (attach_one): New function.
(sane_init): Use sanei_config_attach_matching_devices().
* backend/artec.c: Like for apple.c.
* backend/canon.c: Ditto.
* backend/coolscan.c: Ditto.
* backend/dmc.c: Ditto.
* backend/epson.c: Ditto.
* backend/hp.c: Ditto.
* backend/microtek.c: Ditto.
* backend/mustek.c: Ditto.
* backend/s9036.c: Ditto.
* backend/snapscan.c: Ditto.
* backend/tamarack.c: Ditto.
1998-05-11 David Mosberger-Tang <David.Mosberger@acm.org>
* backend/snapscan.c (sane_snapscan_get_parameters): Always set
depth of 8.
* configure.in: Check for gtk_tooltips_set_tips _after_ gtk
libraries have been located. (Patch by Jake E. Hamby
<jehamby@lightside.com>).
1998-05-09 David Mosberger-Tang <David.Mosberger@acm.org>
* sanei/Makefile.in (.c.o): Patch by Kaz Sasayama
<Kaz.Sasayama@hypercore.co.jp>: invoke $(COMPILE) if libtool
doesn't give us a regular .o file.
* lib/Makefile.in (.c.o): Ditto.
* frontend/preview.c (preview_update): Call update_selection() so
selection is updated when scanwindow geometry changes. The patch
from 1998/4/2 never worked satisfactorily (and indeed was never
enabled in any of the SANE releases).
1998-05-06 David Mosberger-Tang <David.Mosberger@acm.org>
* backend/mustek.c (sane_init): Use sanei_config_skip_whitespace()
to skip whitespace.
1998-05-05 David Mosberger-Tang <David.Mosberger@acm.org>
* frontend/xscanimage.c (init): Allow -g as an option.
* sanei/sanei_config.c (sanei_config_get_string): New function.
(sanei_config_skip_whitespace): Ditto.
* backend/umax.c: Updated with Oliver's latest patch.
* Makefile.in (INSTALLED_INCLUDES): Mention sanei_readproc.h.
* backend/microtek.h: Updated with Matto's 0.7 patch.
* doc/sane-microtek.man: Ditto.
* backend/microtek.c: Ditto.
Added precalibration code: tries to intelligently have scanner
run a calibration only once when necessary --- this shaves a solid
six seconds off every scan!
Added model code/vendor name for ScanMaker 600ZS.
Added model codes/vendor name for Agfa Arcus II, StudioScan,
StudioScan II.
Patched up 3-pass scanning (forgot to switch color planes).
Corrected IIHR to 600dpi base resolution.
Check so that 0x0 regions are recognized as invalid.
Fixed subtle buffering bug in color scans.
Fixed-up active/inactive dependencies among options.
Make sure shadow <= midtone <= highlight.
Let shadow/midtone/hightlight be active during LineArt and Halftone.
"Halftoning" option moved into Scan Mode Group (from Enhancement).
Removed some illegal "TEST_UNIT_READY" commands (during scan).
Removed "MODE_SENSE_1", since it didn't quite work anyway.
1998-05-03 David Mosberger-Tang <David.Mosberger@acm.org>
* frontend/xscanimage.c (scan_preview): Don't register
preview_window_destroyed as a delete_event handler.
1998-05-02 David Mosberger-Tang <David.Mosberger@acm.org>
* backend/Makefile.in: Remove unused LIBLIB macro.
1998-04-30 David Mosberger-Tang <David.Mosberger@acm.org>
Patches by Matto Marjanovic:
* frontend/gtkglue.c (gsg_close_dialog_callback): Remove
client_data pointer arg.
* frontend/xscanimage.c (scan_win_delete): Remove GdkEvent arg.
(preview_window_destroyed): Ditto.
(input_available): Include bad_depth handling code only if
HAVE_LIBGIMP_GIMP_H is defined.
(scan_dialog): Remove client_data pointer arg.
1998-04-29 David Mosberger-Tang <David.Mosberger@acm.org>
* frontend/gtkglue.c (gsg_get_filename): Use gtk_events_pending()
instead of gdk_events_pending().
* frontend/preview.c (input_available): Ditto.
* frontend/xscanimage.c (quit_xscan): Ditto.
(input_available): Ditto.
1998-04-08 David Mosberger-Tang <David.Mosberger@acm.org>
* sanei/sanei_pio.c (sanei_pio_open): Fix prototype.
1998-04-07 David Mosberger-Tang <David.Mosberger@acm.org>
* Version 0.72 released.
* backend/epson.c (sane_init): Fix up config file reading
to be more like that of other backends.
(PATH_MAX): Use PATH_MAX instead of FILENAME_MAX.
* backend/canon.c (sane_init): Read & process canon.conf (patch by
Yuri Dario <mc6530@mclink.it>).
1998-04-06 David Mosberger-Tang <David.Mosberger@acm.org>
* sanei/sanei_init_debug.c (sanei_init_debug): Move up #endif
so NULL-test works for OS/2, too.
* frontend/saned.c: Include <sys/types.h>.
* backend/snapscan.c: Don't include non-ANSI <values.h>.
(sane_snapscan_start): Use INT_MAX instead of MAXINT.
(PATH_MAX): Define PATH_MAX as 1024 if not defined otherwise.
1998-04-05 David Mosberger-Tang <David.Mosberger@acm.org>
* backend/umax.c: Updated with Oliver's latest version
(0.72pre-a).
1998-04-04 David Mosberger-Tang <David.Mosberger@acm.org>
* backend/coolscan.c: Do lalloca.h spiel instead of including
alloca.h.
* configure.in: Look for glib/include directory in /usr/local/lib
and /usr/lib. Add $C_SWITCH_X_SITE to CPPFLAGS, not DEFS.
* doc/sane-mustek.man: Mention MFS-1200SP v1.07 as working as
reported by ehramm@dk3uz.hh.provi.de (Edmund H. Ramm).
1998-04-03 David Mosberger-Tang <David.Mosberger@acm.org>
* backend/canon-scsi.c (request_sense): ifdef out to quiet down
gcc.
* backend/artec.c (read_data): Print size_t as (u_long) to make it
work right and without compiler warning both on 32 and 64 bit
platforms.
(artec_get_status): Ditto.
(init_and_start_scan): Ditto.
(sane_start): Ditto.
(sane_read): Ditto.
(artec_buffer_line_offset): Declare LEN as size_t.
* backend/epson.c (sane_read): Ditto.
* sanei/sanei_pio.c (pio_wait): Initialize STAT with 0 to quiet
down gcc.
* backend/Makefile.in (libsane-epson.la): Mention sanei_pio.lo.
(libsane-dll.la libsane.la): Ditto.
* sanei/Makefile.in (LIBSANEI_OBJS): Mention sanei_pio.o.
(LIBSANEI_LTOBJS): Mention sanei_pio.lo.
* frontend/xcam.c (input_available): Undo braindamage regarding
break out of scan loop (the SANE docs _do_ specify that in
blocking mode, *len==0 implies end of scan).
* frontend/xscanimage.c: Ditto.
* doc/sane-dmc.man: New file by David Skoll.
* sanei/sanei_DomainOS.c: New file by Paul Walker.
* backend/snapscan.c (DL_INFO, DL_MAJOR_ERROR): Up error code to 1
to avoid printing anything unless the user specifically asked
for this.
* include/sane/sanei_debug.h (DBG_LEVEL): Define debug level
variable as macro DBG_LEVEL.
* README.solaris (NOTE): Emphasize that generic scsi driver
needs to be installed before running configure.
* backend/s9036.c: Don't depend on GNU C dynamically sized arrays.
* backend/coolscan.c (send_one_LUT): Use alloca() instead of
depending on GNU C dynamically sized arrays.
Include <alloca.h>.
* frontend/xscanimage.c (input_available): Break out of the
loop only if LEN==0 _and_ we have a non-negative input tag.
* frontend/xcam.c (input_available): Ditto.
* backend/microtek.c (parse_inquiry): Handle for ScanMaker 35t+.
(id_microtek): Ditto.
1998-04-02 David Mosberger-Tang <David.Mosberger@acm.org>
* configure.in (CPPFLAGS): Check for libXi.
* frontend/gtkglue.c (panel_destroy): Clear dialog elements
after destroying the panel.
Patches by Christian Bucher <cbucher@vernetzt.at>:
* include/sane/sanei_pio.h: New file.
* sanei/sanei_pio.c: Ditto.
* backend/epson.c, backend/epson.h, backend/epson.conf: Updated
with Christian's version adds support for parallel port interface.
* sanei/sanei_scsi.c (sanei_scsi_req_wait): Patch by Matto to let
sense-handler decide whether a non-zero sense_buffer[0] really
should be considered an error (needed for Microtek backend).
* doc/sane.tex (\subsubsection{Option Value Unit}): Document new
unit SANE_UNIT_MICROSECOND.
Patches by Oliver Rauch:
* frontend/gtkglue.c (unit_string): Handle SANE_UNIT_MICROSECOND.
* frontend/scanimage.c (print_unit): Ditto.
(parse_scalar): Ditto.
* include/sane/sane.h: Add SANE_UNIT_MICROSECOND.
* Upgrade to Kevin's latest SnapScan backend (0.4).
* doc/sane-hp.man: Mention ScanJet IIp C1790A as working (reported
by Ronald.Vogelaar@nl.origin-it.com).
* frontend/xscanimage.c (init): Issue an error message when we see
option -g as this is most likely due to someone invoking
xscanimage through GIMP when GIMP support is missing.
(scan_done): Add sanity check.
(scan_start): Ditto.
* Upgraded to Matto's latest Microtek backend (0.6).
* Upgraded to Oliver's latest UMAX backend (0.71h).
* frontend/preview.c (draw_selection): Fix so that selection is
updated when sliders are moved. Patch by Mikko Tyo"la"ja"rvi.
* backend/snapscan.c (DL_INFO): Increase from 0 to 1.
(DL_MAJOR_ERROR): Ditto. This avoids printing error messages
unless the user specifically requests them.
* frontend/gtkglue.c: Include <sys/types.h>.
* include/sane/config.h.in: Ignore HAVE_USLEEP under Apollo
Domain.
Patches by Paul Walker:
* sanei/sanei_scsi.c: New Domain OS code.
* tools/find-scanner.c: Include <sane/config.h>.
* lib/usleep.c (usleep): Use time_$wait() to avoid broken usleep()
implementation in Domain Sys5.3 environment.
* config.sub: Translate sys5.3 into sysv3 for the benefit
of Apollo Domain/OS.
* sanei/sanei_init_debug.c (sanei_init_debug): Use DosScanEnv()
instead of getenv() under OS/2. (Patch by Yuri Dario
<mc6530@mclink.it>)
1998-03-02 David Mosberger-Tang <David.Mosberger@acm.org>
* frontend/xcam.c (main): Remove obsolete call to
gdk_set_debug_level (0).
* backend/mustek.c (attach): Print debug message when discovering
unknown model.
* doc/sane-scsi.man: Mention Adaptec 1505.
* tools/find-scanner.c (main): List FreeBSD specific device names.
* tools/Makefile.in (LIBS): Define.
(find-scanner): Mention $(LIBS).
* backend/epson.conf: New file.
Patches by Yuri Dario <mc6530@mclink.it>:
* backend/epson.c (sane_init): Support config file.
* sanei/sanei_ab306.c (outb): Add missing parens.
* backend/snapscan.c: Don't include <values.h>
* backend/net.c: Include netdb.h after in.h to appease OS/2.
Include <sys/types.h>.
* sane-0.71.spec (%files): Mention sane-dmc.5.
* doc/Makefile.in (SECT5): Ditto.
* backend/dmc.c, backend/dmc.h: Update with Feb 26 patch from
David Skoll.
* doc/dmc.man: New file by David Skoll.
1998-02-25 David Mosberger-Tang <David.Mosberger@acm.org>
* backend/dmc.c (DMCSetMode): Add missing field name (patch by
Martin Huber).
* tools/find-scanner.c (main) [__sun]: Add missing command (patch
by Martin Huber.
* sanei/sanei_scsi.c (sanei_scsi_cmd): Fix typo: fd_Info->fd_info
(patch by Jeff Freedman).
* configure.os2: Update with patch by Jeff Freedman.
* backend/snapscan.c (sane_snapscan_start): Replace non-standard
MAXINT by INT_MAX from <limits.h>.
(PATH_MAX): Define PATH_MAX as 1024 if not defined by headers.
1998-02-23 David Mosberger-Tang <David.Mosberger@acm.org>
* Version 0.71 released.
* backend/dmc.c (DMCAttach): Close scsi fd before returning.
* backend/microtek.c: Default to no_dump.
(sane_init): Change "nodump" into "dump" option.
* doc/sane-microtek.man: Document this change.
* backend/snapscan.c: Include <sane/sanei_config.h>.
(sane_snapscan_init): Use sanei_config_open() instead of fopen().
* backend/snapscan.c: Upgrade to latest version (0.3 patch 7).
* backend/snapscan.h: Ditto.
* configure.in (V_MINOR): Up version to 0.71.
* sanei/sanei_scsi.c (scsi_cmd) [USE == SOLARIS_INTERFACE]: "or"
in lun instead of overwriting cdb[1] (patch by Martin Huber
<hu@garfield.m.isar.de>).
* backend/snapscan.c: Replace <posix1_lim.h> with <limits.h>.
* backend/mustek.c (fix_line_distance_mfs): Add back missing
multiplication by bpl (patch by Stefano Garavaglia
<alter.ego@iol.it>).
* backend/coolscan.c: Updated with Didier's latest version.
(COOLSCAN_CONFIG_FILE): Rename from PATH_COOLSCAN_CONFIG and
define as "coolscan.conf". Include <sane/sanei_config.h>.
(sanei_init): Use sanei_config_open() instead of fopen().
* backend/coolscan-scsidef.h: Ditto.
* backend/coolscan.h: Ditto.
* backend/hp.c (sane_close): Change s to s->next (patch by David
Skoll <dskoll@chipworks.com>).
1998-02-17 David Mosberger-Tang <David.Mosberger@acm.org>
* backend/Makefile.in (PRELOADABLE_BACKENDS): Mention apple &
coolscan.
* backend/coolscan.c: New file (by Didier Carlier
<didier@sema.be>)..
* backend/coolscan.h: Ditto.
* backend/coolscan-scsidef.h: Ditto.
* backend/apple.c: Include <sane/sanei_config.h>
(APPLE_CONFIG_FILE): Rename from PATH_APPLE_CONFIG.
(sane_init): Use sanei_config_open().
* backend/apple.conf: New file.
* backend/dll.conf: Mention apple & coolscan backends.
* backend/apple.c: New file (by Milon Firikis
<milonf@isosun.ariadne-t.gr>).
* backend/apple.h: Ditto.
* sane-0.70.spec: Make symlink for libsane.so.0.
* doc/sane-epson.man: Mention GT-5500 scanner as working (as
reported by Umberto Zanatta <uzanatta@foscolo.org>).
1998-02-12 David Mosberger-Tang <David.Mosberger@acm.org>
* sanei/sanei_scsi.c (DOMAINOS_INTERFACE): Define. Add
Apollo Domain/OS support contributed by Paul Walker.
* configure.in (AC_CHECK_HEADERS): Mention apollo/scsi.h.
Add #undef of HAVE_APOLLO_SCSI_H. Add type checks for u_char,
u_int, u_long (DomainOS reportedly needs these).
* sanei/sanei_scsi.c (sanei_scsi_req_wait) [USE ==
LINUX_INTERFACE]: Always check for a non-zero error code in the
sense-buffer. The Linux sg driver guarantees that the sense
buffer is clear to zero when no sense code has been requested, so
this is safe.
1998-01-28 David Mosberger-Tang <David.Mosberger@acm.org>
* Version 0.7 released.
1998-01-27 David Mosberger-Tang <David.Mosberger@acm.org>
* frontend/xscanimage.c (quit_xscan): Exit with status 0, not 1.
* tools/xerox (scale): Added improvements contributed by Joachim
Woll <woll@physik.uni-kassel.de>.
* Upgrade to Oliver's latest UMAX backend.
* include/Makefile.in (distclean): Add empty all rule. Add
distclean rule to delete Makefile.
* Makefile.in (distclean): Delete japi/Makefile as well (this
command should be removed once japi gets added to SUBDIRS).
* backend/Makefile.in (EXTRA): Remove ../lib/usleep.lo and
../lib/strndup.lo.
(libsane.la): Make dependent on $(LIBOBJS).
* frontend/xscanimage.c (preview_window_destroyed): Declare second
arg (added in some version of gtk?).
* tools/find-scanner.c (main): Change __sgi__ to __sgi.
1998-01-26 David Mosberger-Tang <David.Mosberger@acm.org>
* backend/microtek.c: Don't declare strdup()---you're bound to get
it wrong for some platforms!
* doc/sane-scsi.man: Say explicity that generic SCSI support needs
to be enabled.
* doc/sane-hp.man (Problems): Document PhotoSmart problems
as reported Peter Kirchgessner <Pkirchg@aol.com>.
* backend/snapscan.c: Upgrade to v0.3 from
http://www.cs.ualberta.ca/~charter/snapscan.html.
* backend/snapscan.h: Ditto.
1998-01-22 David Mosberger-Tang <David.Mosberger@acm.org>
SnapScan backend by Franck Schnefra, Michel Roelofs and
Kevin Charter:
* backend/snapscan.c: New file.
* backend/snapscan.h: Ditto.
* backend/snapscan.conf: Ditto.
* backend/umax-scanner.h (scanner_str): Add missing comma.
* sanei/sanei_scsi.c (sanei_scsi_cmd): Pass sense_handler_arg to
sense handler for BSD_INTERFACE, HPUX_INTERFACE,
OPENSTEP_INTERFACE, DECUNIX_INTERFACE, SCO_OS5_INTERFACE,
OS2_INTERFACE, IRIX_INTERFACE, AIX_GSC_INTERFACE, and
SOLARIS_INTERFACE.
* include/sane/config.h.in: Add missing #undef of
HAVE_SYS_SCSI_TARGETS_SCGIO_H.
Ditto for HAVE_SYS_SCSI_SGDEFS_H.
1998-01-20 David Mosberger-Tang <David.Mosberger@acm.org>
* Version 0.69 released.
* doc/sane-scsi.man: Limit ncr810 patch to kernel versions <
2.0.33.
* tools/xerox (HEIGHT): Add A4 paper size as comment.
1998-01-19 David Mosberger-Tang <David.Mosberger@acm.org>
* frontend/preview.c (make_preview_image_path): New function.
(preview_destroy): Save scan surface parameters as a comment
in the preview image.
(restore_preview_image): Read scan surface parameters from
preview image file and restore only if the parameters match
the currently selected surface.
(paint_image): Gracefully handle NULL image_data.
(event_handler): Don't call restore_preview_image().
(preview_update): Detect if the scan surface changed. If so,
establish a new preview widget size, preview area size, and
restore a preview image, if available.
* backend/mustek.c (sense_handler): Declare closure argument.
* sanei/sanei_scsi.c (sanei_scsi_open): Fix typos.
* backend/umax-scsi.c (umax_open_scanner): Pass us as sense_arg.
(umax_open_scanner): Ditto.
(umax_open_scanner): Ditto.
* backend/umax.c (sane_start): Ditto.
* backend/canon.c (attach): Pass 0 as sense_arg to sanei_scsi_open().
(sane_start): Ditto.
* backend/epson.c (attach): Ditto.
(sane_start): Ditto.
* backend/tamarack.c (sense_handler): Ditto.
* backend/s9036.c (sane_start): Ditto.
* backend/mustek.c (dev_open): Ditto.
* backend/hp.c (attach): Ditto.
(sane_start): Ditto.
* backend/mustek.c (dev_open): Ditto.
* tools/find-scanner.c (main): Ditto.
* include/sane/sanei_scsi.h (SANEI_SCSI_Sense_Handler): Declare
closure arg.
(sanei_scsi_open): Ditto.
* doc/sane-hp.man (Model): Remove obsolete comment regardign 5P.
1998-01-17 David Mosberger-Tang <David.Mosberger@acm.org>
* backend/mustek.c (dev_open): Fix debug message.
* Solaris related patches by Martin Huber:
* backend/umax-scsi.c (umax_wait_scanner): Sleep for 1 second
instead of 100ms on Sun platforms---the SCHILYscg driver prints a
warning message each time a device is busy. Duh.
(umax_get_data_buffer_status): Don't do
umax_get_data_buffer_status() on Sun's. This should be fixed...
* sanei/sanei_scsi.c (sanei_scsi_open): Call unit_ready() towards
the end of this function.
(CCS_SENSE_LEN): Define as 18 if not defined
by any header files.
(sanei_scsi_cmd): Use sensebuffer to collect sense info.
(scsi_cmd): Better error handling when using SCHILYscg driver.
1998-01-14 David Mosberger-Tang <David.Mosberger@acm.org>
* frontend/xscanimage.c (scan_start): Turn off dialog sensitivity.
(scan_done): Restore dialog sensitivity.
* backend/qcam.c (init_options): Turn on SANE_CAP_ALWAYS_SETTABLE.
* frontend/preview.c (scan_done): Enable dialog sensitivity.
(scan_start): Disable dialog sensitivity.
* include/sane/sane.h (SANE_CAP_ACTIVE_WHILE_SCANNING): New
manifest constant.
1998-01-12 David Mosberger-Tang <David.Mosberger@acm.org>
* frontend/gtkglue.c (panel_destroy): Call gtk_tooltips_unref()
instead of gtk_tooltips_destroy() as suggested by Ben Gertzfield
<che@debian.org>.
1997-12-25 David Mosberger-Tang <David.Mosberger@acm.org>
* backend/canon.c: New file by Helmut Koeberle
<helmut.koeberle@bytec.de>.
(sane_start): Print variables of type size_t as %lu and cast to
(u_long), to make it compile without warning on all platforms.
(attach): Remove extraneous semicolon.
* backend/canon.h (canon_h): Ditto
* backend/canon-scsi.c: Ditto.
1997-12-24 David Mosberger-Tang <David.Mosberger@acm.org>
* sanei/sanei_ab306.c (sanei_ab306_cmd): Write the first
6 bytes of a SCSI command only (suggested by Andreas, but
is this really correct??).
* backend/mustek.c (gamma_correction): Add patch by Andreas
Czechanowski <andreas@inspc44c.ins.uni-stuttgart.de> to
fix lineart scanning for Paragon II 600 N scanner.
1997-12-23 David Mosberger-Tang <David.Mosberger@acm.org>
* tools/find-scanner.c (scanner_identify_scanner): Print info on
all SCSI devices when --verbose is in effect.
(main): Add Sun device names.
* include/sane/config.h.in: Define _POSIX_SOURCE and
__EXTENSIONS__ when compiling on a Sun with GCC.
* configure.in (AC_CHECK_HEADERS): Mention sys/scsi/sgdefs.h and
sys/scsi/targets/scgio.h.
1997-12-17 David Mosberger-Tang <David.Mosberger@acm.org>
* frontend/xscanimage.c (device_dialog): Suggestion by Matt: set
window auto-shrink by calling gtk_window_set_policy().
* japi/ImageCanvas.java: Updated with Jeff's latest patch.
* japi/Jscanimage.java: Ditto.
* japi/Makefile.in: Ditto.
* japi/README.JAVA: Ditto.
* japi/ScanIt.java: Ditto.
* japi/ImageCanvasClient.java: New file.
1997-12-16 David Mosberger-Tang <David.Mosberger@acm.org>
* frontend/gtkglue.c (panel_build): Patch by Matt: a) For all
individual options flagged as "advanced", panel_build will only
display the option if the "Show advanced" button is toggled.
Group identifiers flagged as "advanced" are handled the same as
before. b) panel_rebuild is called whenever the "Show advanced"
button is toggled on or off.
* doc/sane-scsi.man: Mention sane-epson(5) and sane-microtek(5).
* doc/scanimage.man: Ditto.
* doc/xscanimage.man: Ditto.
* doc/sane-microtek.man: New file by Matt.
* backend/microtek.c: Updated with Matt's version 0.4.
* backend/microtek.h: Ditto.
* backend/microtek.conf: Ditto.
* doc/Makefile.in (SECT5): Mention sane-microtek.5.
1997-12-15 Fred Hucht & Michael Staats <{fred|michael}@thp.Uni-Duisburg.DE>
* Added support for generic SCSI under AIX 4.1.x using the device
driver gsc written by Matthew Jacob <mjacob@feral.com> (nice piece
of work!).
Find this driver under
ftp://ftp.feral.com/pub/aix/gsc.tar.gz or
ftp://ftp.thp.Uni-Duisburg.DE/pub/source/gsc.tar.gz.
Changed files: sanei/sanei_scsi.c, include/sane/config.h.in,
configure.in.
* Moved '#include <lalloca.h>' to very beginning in all source
files as AIX needs it there.
* Added define OUTFILENAME to frontend/xscanimage.c.
* Fixed wrong environment reference in /doc/sane-scsi.man.
* Several changes in tools/find-scanner.c to run using
above mentioned driver.
Fixed wrong IN_periph_devtype_cpu (was 1, should be 3).
1997-12-14 David Mosberger-Tang <David.Mosberger@acm.org>
* doc/sane-hp.man: Mention ScanJet 4P (reported to work by
Adam Sjoegren <asjo@diku.dk>).
1997-12-09 David Mosberger-Tang <David.Mosberger@acm.org>
* frontend/saned.c (check_host): Change len from size_t to int to
match getpeername() as per Single Unix Spec (as opposed to POSIX
drafts...).
(start_scan): Ditto for getsockname().
* backend/net.c (sane_start): Ditto.
* backend/tamarack.c (TAMARACK_CONFIG_FILE): Delete.
(TAMARACK_CONFIG_FILE): New macro.
Include <sane/sanei_config.h>.
(sane_init): Use sanei_config_open() instead of fopen().
(read_data): Declare nbytes as size_t---makes a difference
on 64-bit platforms.
1997-12-07 David Mosberger-Tang <David.Mosberger@acm.org>
* backend/s9036.c (sane_init): Run through "indent -gnu". Use
sanei_config_open() instead of fopen(). Include
<sane/sanei_config.h>.
(read_more_data): Print size_t variables by casting them to
(u_long) and using %lu format (some platforms have size_t as
u_long, others as u_int, which does make a difference if
sizeof(long) > sizeof(int).
(sane_start): Ditto.
Add English translation for comments that were in German only.
* backend/s9306.c: New file by Ingo Schneider.
* backend/s9306.h: New file by Ingo Schneider.
1997-12-04 David Mosberger-Tang <David.Mosberger@acm.org>
* backend/mustek.c (sane_cancel): Collect child process status
after killing it (avoids accumulating zombie processes). Reported
by Mike Sweet.
* backend/umax.c (sane_cancel): Ditto.
* backend/qcam.c (sane_close): Ditto.
(sane_cancel): Ditto.
1997-12-03 David Mosberger-Tang <David.Mosberger@acm.org>
* Version 0.68 released.
1997-12-02 David Mosberger-Tang <David.Mosberger@acm.org>
* frontend/scanimage.c (window_val_user): New variable.
(fetch_options): Don't overwrite window_val[i] if it's
user-specified.
(main): Set window_val_user[i] as necessary.
* backend/mustek.c (send_gamma_table): New function.
(sane_start): Send gamma table both before and after start_scan().
The MFS-06000CX is reported to need the gamma-table before
start_scan() and the Mustek docs do indeed indicate downloading
the gamma-table twice.
(init_options): Make --custom-gamma option active by default (since
gray-scale mode is the default mode).
1997-11-30 David Mosberger-Tang <David.Mosberger@acm.org>
* doc/sane-mustek.man: Mention MFC-08000CZ.
* backend/mustek.c (attach): Reduce y_range.max for MFC-08000CZ
from 300 to 292mm as reported by Jeroen Steenblik
<jeroens@esrac.ele.tue.nl>. Ditto for MFC-06000CZ.
1997-11-28 David Mosberger-Tang <David.Mosberger@acm.org>
* backend/umax-scanner.h (scanner_str): Add "Astra 610S".
(known_scanners): Increment from 13 to 14.
PP fixes by Andreas Czechanowski:
* backend/mustek.c (EXTRA_SAVE_LINES): New macro.
(fix_line_distance_pp): Use EXTRA_SAVE_LINES instead of hardcoded
constant. Various fixes to make it actually work.
(reader_process): Initialize s->ld_ld_line to zero.
* backend/mustek.h (struct Mustek_Scanner): Add member ld_line.
1997-11-26 David Mosberger-Tang <David.Mosberger@acm.org>
* tools/Makefile.in (.c.o): Add this rule.
* tools/find-scanner.c: Include sanei_scsi.h and sanei_debug.h
via <> quotes (note "").
1997-11-25 David Mosberger-Tang <David.Mosberger@acm.org>
* sanei/sanei_ab306.c (sanei_ab306_exit): Fix by Andreas
Czechanowski: output 0x00 at port[i].base + 1 instead.
1997-11-22 David Mosberger-Tang <David.Mosberger@acm.org>
* doc/sane-mustek.man (Model): Clarify that paralell port != printer
port.
* backend/mustek.c (fix_line_distance_mfs): Add missing SANE_UNFIX()
calls for x_range.max and dpi_range.max.
(fix_line_distance_pp): Correct based on Andreas' feedback.
1997-11-18 David Mosberger-Tang <David.Mosberger@acm.org>
* configure.in (CFLAGS): Don't specify -ansi---with older libcs,
it's causing more problems than it's worth.
* Patch by Jeff Freedman:
* japi/Sane.c: Limit string length to option size.
* japi/SaneOption.java: Fix indentation.
(unitString): New function.
* japi/ImageCanvas.java: New file.
* japi/Jscanimage.java: Ditto.
* japi/ScanIt.java: Ditto.
* japi/Makefile.in (CLASSES): Mention ScanIt.class and
ImageCanvas.class.
(all): Mention Jscanimage.class.
* japi/Scan.c: Include <string.h>.
(String_length): New function.
1997-11-16 David Mosberger-Tang <David.Mosberger@acm.org>
* frontend/gtkglue.c (scale_update): In recent versions of GTK,
"value_changed" callbacks no longer return a value. Change this
function to type "void" accordingly.
* sanei/sanei_scsi.c: Declare cam_fd only if USE ==
DECUNIX_INTERFACE.
* sanei/sanei_load_values.c (sanei_load_values): Detect errors
while reading the option name (first call to sanei_w_string()).
Reported by Geoffrey T. Dairiki.
* sanei/sanei_ab306.c [HAVE_UNISTD_H]: Include <unistd.h>. Fix by
Geoffrey T. Dairiki.
* lib/alloca.c: Enclose in #ifndef HAVE_ALLOCA bracket. Fix by
Geoffrey T. Dairiki.
* include/lalloca.h: Declare alloca() as returning void* when
__STDC__ is in effect so declaration matches definition in
lib/alloca.c. Reported by Geoffrey T. Dairiki.
* frontend/preview.c (update_selection): Set coord[] values to
rounded-to-nearest-int of float values. This avoids the jumping
selection box effect. Fix by Geoffrey T. Dairiki.
* frontend/gtkglue.c (scale_update): Patch by Geoffrey T. Dairiki
<dairiki@apl.washington.edu>: emit value_changed signal if the
backend changed the value.
* backend/umax.c: Upgraded to Oliver's latest UMAX version.
* backend/mustek.c (sane_init): Ignore white space in front of an
option/device-name.
1997-11-12 David Mosberger-Tang <David.Mosberger@acm.org>
* sanei/sanei_ab306.c (sanei_ab306_get_io_privilege):
(struct port): Remove member HAVE_IO_PRIVS.
(sanei_ab306_get_io_privilege): Get ioperm()issions independent of
HAVE_IO_PRIVS.
* backend/mustek.c (do_stop): Always send STOP command before
closing the device.
(dev_read_req_enter): For parallel-port scanner, set *idp to 0.
1997-11-10 David Mosberger-Tang <David.Mosberger@acm.org>
Bug reported by Matto Marjanovic <maddog@mir.com>:
* frontend/gtkglue.c (panel_build): Create button only after we
know the option's value.
(button_new): Add VAL argument and initialize button state to
correct value before connecting the toggled callback.
Bugs reported by Petter Reinholdtsen <pere@link.no>:
* sanei/sanei_config.c (sanei_config_open): Add missing cast to
(char *).
* sanei/sanei_scsi.c (sanei_scsi_cmd) [USE == IRIX_INTERFACE]: Fix
(u_char) cast to (u_char *).
1997-11-06 David Mosberger-Tang <David.Mosberger@acm.org>
* backend/qcam.c (init_options): Set the type of OPT_NUM_OPTS to
SANE_TYPE_INT (suggested by Guido Muesch
<odiug@faho.rwth-aachen.de>).
* backend/mustek.c (init_options): Ditto.
1997-11-04 David Mosberger-Tang <David.Mosberger@acm.org>
* frontend/xcam.c (xcam_exit): Protect against recursive
invocation.
(main): Turn on preferences.advanced as no graphical geometry
selection exists right now.
Include <preferences.h>.
preferences: New variable.
(pref_toggle_advanced): New function.
(pref_toggle_tooltips): Ditto.
(build_preferences_menu): Add button to control advanced & tooltips
preferences.
* doc/sane.tex (subsection{sanecontrol_option}): Make it illegal
for SANE_INFO_RELOAD_OPTIONS to be set needlessly.
* backend/hp.c (sane_control_option): Only turn on RELOAD_PARAMS
when value changed.
* backend/qcam.c (sane_control_option): Only turn on
RELOAD_PARAMS when value changed.
* backend/mustek.c (sane_control_option): Only turn on
RELOAD_OPTIONS and/or RELOAD_PARAMS when value changes.
* Integrate b&w quickcam fixes by Guido Muesch
<odiug@faho.rwth-aachen.de>:
* backend/qcam.c (bw_x_range, odd_bw_x_range, bw_y_range,
odd_bw_y_range): New constants.
(sane_open): Disable despeckle, black-level, hue, saturation,
resolution & test options for b&w camera (either not useful or not
supported at this point).
(sane_start): Use QC_MONO_SET_CONTRAST instead of
QC_BW_SET_CONTRAST.
(sane_start): Call qc_reset() for b&w camera to avoid hangs (color
camera doesn't need this and is faster that way).
(sane_start): Multiply undecimated_width by s->val[OPT_DEPTH].w,
not 4.
* backend/qcam.h: Remove obsolete QC_BW_SET_CONTRAST,
QC_BW_AUTO_ADJUST_OFFSET, QC_BW_GET_OFFSET, and QC_SET_CONTRAST
macros.
1997-11-02 David Mosberger-Tang <David.Mosberger@acm.org>
* doc/sane-hp.man (Model): Mention ScanJet IIcx. Johannes Geiger
<J_Geiger@fleury.de> reported it to work fine under OS/2 with
sane-0.66
* backend/umax.c: Apply patch by Oliver Rauch that avoid
umax hangs.
1997-11-01 David Mosberger-Tang <David.Mosberger@acm.org>
* Version 0.67 released.
* sanei/sanei_ab306.c: New file.
* backend/mustek.h (MUSTEK_FLAG_PP): New macro.
(struct Mustek_Scanner): Add members ld.index and ld.lmod3
for parallel-port scanner line-distance correction.
* backend/mustek.c (color_seq): Move to global level from
fix_line_distance_normal().
(fix_line_distance_pp): New function.
(scsi_wait_ready): Renamed from wait_ready().
(pp_wait_ready): New function.
(dev_wait_ready): Ditto.
(dev_open): Ditto.
(dev_cmd): Ditto.
(dev_req_wait): Ditto.
(dev_read_start): Ditto.
(dev_read_req_enter): Ditto.
(dev_close): Ditto.
(attach): Modify to use dev_open(). Set minimum scan resolution
to 51 dpi for parallel-port scanners.
(scan_area_and_windows): Call dev_cmd() instead of
sanei_scsi_cmd().
(mode_select): Ditto.
(gamma_correction): Ditto.
(start_scan): Ditto.
(stop_scan): Ditto.
(line_distance): Ditto.
(get_image_status): Ditto.
(backtrack_and_adf): Ditto.
(gamma_correction): Return immediately if custom-gamma is turned
off or if not doing a multibit scan. Add support for sending all
three gamma tables with a single command.
(line_distance): Initialize additional line-distance correction
state needed by parallel-port scanner.
(read_req_enter): Remove.
(send_data): Modify to support parallel-port scanner line-distance
correction.
(reader_process): Require I/O-privilege if dealing with parallel
port scanner and call dev_read_start(). Use dev_read_req_enter()
instead of read_req_enter(), dev_req_wait() instead of
sanei_scsi_req_wait().
(sane_start): For parallel-port scanner, send gamma table with
a single gamma_correction() call.
* doc/sane-mustek.man: Update with info regarding parallel port
scanner.
* backend/dll.c (add_backend): When a backend is present already,
move it to the head of the backend list, so pre-loaded backends
appear in the same order as if they had been loaded dynamically
* backend/mustek.c (pp_mode_list): New constant.
* backend/mustek.c (init_options): Use pp_mode_list for parallel
port type scanners (no color lineart/halftone modes).
* sanei/sanei_codec_ascii.c (ascii_w_string): free(*s) only if *s
is non-NULL (reported by Geoffrey T. Dairiki
<dairiki@apl.washington.edu>).
* backend/mustek.c (attach): Turn on MUSTEK_FLAG_LD_NONE for
MFS-12000SP with firmware 1.02 or newer. Reported by Henning
Busacker <henning.busacker@Duesseldorf.netsurf.de>.
1997-10-25 David Mosberger-Tang <David.Mosberger@acm.org>
* doc/sane.tex (chapter{Contact Information}): Update mailing list
and home page address.
* backend/dll.c: Include <sane/sanei_config.h>. Call
sanei_config_open() instead of fopen().
* backend/hp.c: Ditto.
* backend/mustek.c: Ditto.
* backend/net.c: Ditto.
* backend/pint.c: Ditto.
* backend/qcam.c: Ditto.
* backend/umax.c: Ditto.
* backend/Makefile.in (EXTRA): Mention ../sanei/sanei_config.lo.
* doc/sane-dll.man: Document SANE_CONFIG_DIR.
* doc/sane-hp.man: Ditto.
* doc/sane-mustek.man: Ditto.
* doc/sane-net.man: Ditto.
* doc/sane-pint.man: Ditto.
* doc/sane-qcam.man: Ditto.
* doc/sane-scsi.man: Ditto.
* doc/sane-umax.man: Ditto.
* doc/saned.man: Ditto.
* backend/microtek.c: Updated with v0.3 from Matt.
Include <sane/sanei_config.h>
(MICROTEK_CONFIG_FILE): Define as "microtek.conf".
(PATH_MICROTEK_CONFIG): Delete.
(sane_init): Replace fopen() with sanei_config_open().
* backend/microtek.h: Ditto.
1997-10-24 David Mosberger-Tang <David.Mosberger@acm.org>
* sanei/sanei_config.c (sanei_config_open): Add multiple-directory
support for SANE_CONFIG_DIR.
* sanei/sanei_config.c: New file by Jeff Freedman.
* include/sane/sanei_config.h: Ditto.
1997-10-23 David Mosberger-Tang <David.Mosberger@acm.org>
* Fixes for OS/2 by Jeff Freedman:
* frontend/Makefile.in (SBINPROGS): Set to @SANED@.
* configure.os2 (LN_S): Add --sysconfdir=.
* configure.in: Set up SANED depending on <sys/socket.h>.
* backend/Makefile.in (EXTRA): Mention usleep.lo and strndup.lo.
* backend/pnm.c (rgblength, rgbbuf, rgbleftover): Declare as
static.
* ltconfig: Upgrade to 1.0d.
* ltmain.sh: Ditto.
* sanei/sanei_constrain_value.c: Include <sane/config.h>.
1997-10-22 David Mosberger-Tang <David.Mosberger@acm.org>
* frontend/gtkglue.h (struct GSGDialog): Remove idle_id member.
* frontend/gtkglue.c (idle_handler): Remove. GTK's reference
counting appears to have been fixed (?).
* backend/umax_scanner.h: Update with Oliver's latest version.
* backend/umax-scsi.c: Ditto.
* backend/umax-scsidef.h: Ditto.
* backend/umax-struct.h: Ditto.
* backend/umax.c: Ditto.
* backend/umax.h: Ditto.
1997-10-18 David Mosberger-Tang <David.Mosberger@acm.org>
* sanei/sanei_scsi.c (sanei_scsi_req_enter): Set cdb.hdr.pack_id
to unique id number.
1997-10-17 David Mosberger-Tang <David.Mosberger@acm.org>
* japi/Makefile.in: New file (by Jeff Freedman <jsf@hevanet.com>).
* japi/README.JAVA: Ditto.
* japi/Sane.c: Ditto.
* japi/Sane.java: Ditto.
* japi/SaneDevice.java: Ditto.
* japi/SaneOption.java: Ditto.
* japi/SaneParameters.java: Ditto.
* japi/SaneRange.java: Ditto.
* japi/Test.java: Ditto.
* configure.in (AC_OUTPUT): Mention japi/Makefile.
* sanei/sanei_scsi.c (sanei_scsi_cmd) [USE == IRIX_INTERFACE]:
Add data buffer alignment fix by Michael Sweet.
1997-10-24 Jeff Freedman <jsf@hevanet.com>
* sanei_open_config() added. Backends call it to open .conf files.
1997-10-14 David Mosberger-Tang <David.Mosberger@acm.org>
* Version 0.66 released.
* README: Update with new URLs and latest GIMP/GTK info.
1997-10-11 David Mosberger-Tang <David.Mosberger@acm.org>
* include/sane/saneopts.h: Add #defines for TEN_BIT_MODE, WARMUP,
RGB_PREVIEW_PATCH, and START_SCAN_PATCH.
* README: Remove umax-specific configure options (they're now
runtime options).
* configure.in (CPPFLAGS): Ditto.
* include/sane/config.h.in: Ditto.
* backend/epson.c: Updated
1997-10-09 David Mosberger-Tang <David.Mosberger@acm.org>
* backend/umax.c (sane_exit): Remove bogus call to free()
(reported by Peter).
Thu Oct 9 20:20:32 1997 Kazuhiro Sasayama <kaz@hypercore.co.jp>
* epson.c (sane_start): Fix lcount computation.
Thu Oct 9 11:44:03 1997 Kazuhiro Sasayama <kaz@hypercore.co.jp>
* epson.c (sane_start): Use byte-interleaved mode if available.
(sane_start): Set line counter for byte-interleaved mode.
(sane_read): Handle byte-interleaved mode.
(sane_init) [PACKAGE && VERSION]: Debug out PACKAGE and VERSION.
Tue Oct 7 18:44:36 1997 Kazuhiro Sasayama <kaz@hypercore.co.jp>
* epson.c (set_lcount): New function.
(sane_start): Use block mode for monochrome if available.
(sane_read): Handle block mode.
* epson.h (struct Epson_Scanner): Add block.
Tue Oct 7 15:48:11 1997 Kazuhiro Sasayama <kaz@hypercore.co.jp>
* epson.c (set_speed): New function.
(sane_start): Use set_speed.
Tue Oct 7 15:44:33 1997 Kazuhiro Sasayama <kaz@hypercore.co.jp>
* README: Add info about a mailing list.
* Makefile.am (libsane_epsonx_la_LDFLAGS): Increment the revision.
* epson.c (identify): Debug output the command level.
1997-10-08 David Mosberger-Tang <David.Mosberger@acm.org>
* backend/mustek.conf: Turn on linedistance-fix and lineart-fix by
default.
* include/sane/config.h.in: Remove
NEED_MUSTEK_LINE_DISTANCE_WORKAROUND.
* doc/sane-mustek.man (CONFIGURATION): Document option
linedistance-fix and lineart-fix.
* configure.in: Remove test for --enable-ld-fix.
* backend/mustek.h (MUSTEK_FLAG_LD_FIX): New flag.
(MUSTEK_FLAG_LINEART_FIX): Ditto.
* backend/mustek.c (line_distance): Replace
NEED_MUSTEK_LINE_DISTANCE_WORKAROUND with runtime test for same.
(reader_process): If MUSTEK_FLAG_LINEART_FIX is on, delay 200ms
when scanning in lineart mode.
(sane_init): New variable. Add linedistance-fix and lineart-fix
support.
* backend/Makefile.in (install): Fix install rule so all symlinks
necessary for libsane.so are installed.
* backend/dll.c (load): Change from LIBNAME to LIBPATH (as per
libtool-1.0c documention).
* sanei/sanei_scsi.c (issue): Declare `static'.
* aclocal.m4: Update with contents of libtool.m4.
* configure.in (AC_PROG_RANLIB): Remove (once again!).
* config.guess: Update from libtool-1.0c.
* config.sub: Ditto.
* ltconfig: Ditto.
* ltmain.sh: Ditto.
* backend/epson.c: Update with Kazuhiro's latest epson version
(1.1.6).
1997-10-07 David Mosberger-Tang <David.Mosberger@acm.org>
* frontend/gtkglue.c (panel_destroy): Clear elem->menu after
freeing it (reported by Kazuhiro Sasayama <kaz@hypercore.co.jp>).
1997-10-06 David Mosberger-Tang <David.Mosberger@acm.org>
* backend/epson.c: Updated with Kazuhiro Sasayama
<kaz@hypercore.co.jp> latest version (1.1.5).
1997-10-04 David Mosberger-Tang <David.Mosberger@acm.org>
* Version 0.65 released.
* sanei/sanei_scsi.c (close_aspi): Rename from sanei_close_aspi (static
functions don't need ugly sanei_ prefix...).
(open_aspi): Ditto.
* configure.os2: New file (from Jeff's config.os2).
* backend/umax-scsi.c: Mmove include of <scsi/scsi.h> and
<scsi/sg.h> into !def UMAX_TO_SANE bracket.
* backend/pnm.c (getparmfromfile): Open with mode "rb" to get
binary file on platforms where this is meaningful.
1997-10-02 David Mosberger-Tang <David.Mosberger@acm.org>
* doc/sane-epson.man: Mention that backend is known to work with
GT-5000.
1997-10-01 David Mosberger-Tang <David.Mosberger@acm.org>
* doc/sane-epson.man: New file (based on Kzuhiro's README file).
* backend/Makefile.in (PRELOADABLE_BACKENDS): Mention epson.
(libsane-epson.la): Add dependencies for Epson backend.
* backend/epson.c: New file by Kazuhiro Sasayama
<kaz@hypercore.co.jp>.
* backend/epson.h: Ditto.
* backend/microtek.c: Updated with latest version from
http://www.mir.com/mtek/ by Matt Marjanovic <maddog@mir.com>.
* backend/microtek.h: Ditto.
1997-10-3 Jeff Freedman <jsf@hevanet.com>
* sanei/sanei_scsi.c: Minor fixes for OS/2 support.
* configure.in: Check for presence of sys/socket.h to set @NET@.
* backend/Makefile.in: net -> @NET@
1997-09-30 David Mosberger-Tang <David.Mosberger@acm.org>
* sanei/sanei_scsi.c: Integrate OS/2 support by Jeff Freedman:
(OS2_INTERFACE) Define.
(open_aspi,close_aspi): New OS/2-specific functions.
(sanei_scsi_open): Add OS/2 support.
[USE = OS2_INTERFACE]: OS/2 version of sanei_scsi_cmd().
(sanei_scsi_cmd, sanei_scsi_req_wait) [STUBBED_INTERFACE]:
Return proper value.
* include/sane/config.h.in (HAVE_STRNCASECMP, HAVE_OS2_H): Add
#undef. If !HAVE_STRNCASECMP, define strncasecmp macro as
alias for strnicmp.
* configure.in (AC_CHECK_FUNCS): Check for strncasecmp().
(AC_CHECK_HEADERS): Check for os2.h.
1997-09-30 David Mosberger-Tang <David.Mosberger@acm.org>
* sanei/sanei_scsi.c: Integrate OS/2 support by Jeff Freedman:
(OS2_INTERFACE) Define.
(open_aspi,close_aspi): New OS/2-specific functions.
(sanei_scsi_open): Add OS/2 support.
[USE = OS2_INTERFACE]: OS/2 version of sanei_scsi_cmd().
(sanei_scsi_cmd, sanei_scsi_req_wait) [STUBBED_INTERFACE]:
Return proper value.
* include/sane/config.h.in (HAVE_STRNCASECMP, HAVE_OS2_H): Add
#undef. If !HAVE_STRNCASECMP, define strncasecmp macro as
alias for strnicmp.
* configure.in (AC_CHECK_FUNCS): Check for strncasecmp().
(AC_CHECK_HEADERS): Check for os2.h.
1997-09-24 David Mosberger-Tang <davidm@azstarnet.com>
* Version 0.64 released.
* PROJECTS (Backend): Update microtek entry.
Add entry for sgivl.
* backend/microtek.conf: New file.
* backend/dll.conf: Mention microtek.
* backend/Makefile.in (PRELOADABLE_BACKENDS): Mention microtek.
(libsane-microtek.la): Mention microtek dependencies.
* backend/microtek.c: New file by Matthew Marjanovic.
* backend/microtek.h: Ditto.
1997-09-23 David Mosberger-Tang <davidm@azstarnet.com>
* sanei/sanei_scsi.c (sanei_scsi_cmd): Integrate Michael Sweet's
latest Irix implementation of sanei_scsi_cmd().
Sat Sep 6 08:59:24 1997 David Mosberger-Tang <David.Mosberger@acm.org>
* Version 0.63 released.
* configure.in (V_MINOR): Bump up to 63.
* configure.in (AM_PROG_RANLIB): Go back to AC_PROG_RANLIB. The
former causes a bad configure script.
Fri Aug 29 16:08:05 1997 David Mosberger-Tang <David.Mosberger@acm.org>
* doc/sane-umax.man: Change status of "Astra 1200S" to "all modes ok"
as Oliver tells me that this has been tested and is working now.
Wed Aug 20 17:23:04 1997 David Mosberger-Tang <David.Mosberger@acm.org>
* sane-0.63.lsm: Update email addresses etc.
Integrate Oliver Rauch's UMAX improvements:
* README: Document --enable-umax-preview-fix,
--enable-umax-start-scan-fix.
* configure.in (UMAX_RGB_PREVIEW, UMAX_START_SCAN_PATCH): Define if
necessary.
* include/sane/config.h.in (UMAX_RGB_PREVIEW, UMAX_START_SCAN_PATCH):
Add #undef.
* include/sane/saneopts.h: Add manifest constants for options
resolution-bind, negative, quality-cal, threshold, analog-gamma,
analog-gamma-r, analog-gamma-g, analog-gamma-b, analog-gamma-bind,
smear, white-bind, black-bind.
* AUTHORS (Frontends): Update email addresses of Oliver Rauch and
myself.
1997-08-07 David Mosberger-Tang <davidm@azstarnet.com>
* backend/mustek.c (attach): Print Mustek scanner info at
debug level 2, not 3.
1997-08-06 David Mosberger-Tang <davidm@azstarnet.com>
* frontend/preview.c (XSERVER_WITH_BUGGY_VISUALS): Make conditional
on #ifdef __alpha__ (Michael Sweet reports that the old code broke
SGI IRIX 6.3).
1998-08-01 David Mosberger-Tang <davidm@azstarnet.com>
* include/sane/config.h.in (HAVE_SYS_SCSICMD_H, HAVE_SYS_DSREQ_H):
Undefine.
* configure.in (AC_CHECK_HEADERS): Mention sys/scsicmd.h and
sys/dsreq.h.
* sanei/sanei_scsi.c (SCO_OS55_INTERFACE, IRIX_INTERFACE,
SOLARIS_INTERFACE): Define.
1997-07-27 David Mosberger-Tang <davidm@azstarnet.com>
* frontend/xscanimage.c (quit_xscan) [HAVE_LIBGIMP_GIMP_H]: When
running as a GIMP extension, call gimp_quit().
(init) [HAVE_LIBGIMP_GIMP_H]: Set GDK's xshm flag based on GIMP's
flag.
* doc/sane-mustek.man (SCSI ADAPTER TIPS): Try to make complete
sentences.
1997-07-25 David Mosberger-Tang <davidm@azstarnet.com>
* Version 0.62 released.
* configure.in (CPPFLAGS): Test for gtk_gamma_curve_new() to
see whether appropriate version of gtk is installed.
* backend/mustek.c (sane_init): Add parsing support for option
`strip-height'.
(strip_height): New variable to limit scan strip height.
(reader_process): If strip_height is greater than 0.0, limit
lines_per_buffer so that no more than strip_height inches are
scanned with a single SCSI read command.
* doc/sane-mustek.man (CONFIGURATION): Describe strip-height
option.
1997-07-23 David Mosberger-Tang <davidm@azstarnet.com>
* doc/sane-hp.man (Model): Added ScanJet 3c info.
1997-07-22 David Mosberger-Tang <davidm@azstarnet.com>
* frontend/scanimage.README: Remove file.
* doc/sane-scsi.man: Add info on generic AM53C974 driver.
1997-07-19 David Mosberger-Tang <davidm@azstarnet.com>
* sanei/sanei_scsi.c [USE == LINUX_INTERFACE]: Include
<sys/time.h>.
1997-07-18 David Mosberger-Tang <davidm@azstarnet.com>
* sanei/sanei_scsi.c (sanei_scsi_req_flush_all)
[WE_HAVE_ASYNC_SCSI]: Implement stub.
* scripts/xerox: New file (simple xeroxing script).
* frontend/scanimage.c (main): When opening a device fails, also
print reason for failure.
* frontend/preview.c (preview_new): Register expose_event handler.
(preview_destroy): Call scan_done() if called when preview
scanning in progress.
* backend/mustek.c (attach): Add argument MAY_WAIT. If it's TRUE,
wait for scanner to become ready before sending inquiry command.
(do_cancel): Rename to do_stop. Ignore child's exist status
when we're really cancelling a scan. Issue stop_scan() command
only if the scan got cancelled and do a wait_ready() before
issueing the stop_scan().
(read_data): Delete.
(sane_init): Call attach() with MAY_WAIT set to SANE_FALSE.
(sane_open): Call attach() with MAY_WAIT set to SANE_TRUE.
* frontend/preview.c (display_partial_image): Use gtk_preview_put()
to update the preview window. Much faster than hiding/showing the
widget.
(expose_handler): New function.
* frontend/progress.c (progress_new): Make "Cancel" button a
toggle-button so user can see when it was pressed down while
the backend cancels its operation.
* backend/mustek.c (do_cancel): Call wait_ready() before
attempting to stop scanner.
(read_req_enter): New function.
(send_data): Ditto.
(sigterm_handler): New function.
(reader_process): Reimplement using asynchronous SCSI command
interface.
(wait_ready): Use gettimeofday() to implement timeout. The
scsi command itself may take a considerable amount of time
(1 second or more) so we can't just loop for a fixed number
of times.
* include/sane/sanei_scsi.h: Declre sanei_scsi_req_enter,
sanei_scsi_req_wait, and sanei_scsi_req_flush_all.
* sanei/sanei_scsi.c [WE_HAVE_ASYNC_SCSI]: Define.
(issue): New function.
(sanei_scsi_req_flush_all): New function.
(sanei_scsi_req_enter): Ditto.
(sanei_scsi_req_wait): Ditto.
(sanei_scsi_cmd): Reimplement in terms of enter/wait.
(sanei_scsi_req_enter) [!WE_HAVE_ASYNC_SCSI]: Stub that
simply calls sanei_scsi_cmd().
(sanei_scsi_req_wait): Empty stub.
1997-07-16 David Mosberger-Tang <davidm@azstarnet.com>
* doc/sane-scsi.man: Add Tekram DC390 info (contributed by
kawk@Home.Yo.COM (Kolja Waschk))
1997-07-15 David Mosberger-Tang <davidm@azstarnet.com>
* sanei/sanei_scsi.c (sanei_scsi_cmd) [USE==LINUX_INTERFACE]:
Return SANE_STATUS_NO_MEM if write() of SCSI command fails.
* backend/mustek.c (do_cancel): If reader_process exited, use
exit status as return value.
(reader_process): Return SANE_STATUS_IO_ERROR instead of 1.
Return SANE_STATUS_NO_MEM instead of 2. Return STATUS instead
of 3. Return SANE_STATUS_GOOD instead of 0.
(sane_read): If do_cancel() returns anything but
SANE_STATUS_CANCELLED or SANE_STATUS_GOOD, something bad has
happened and the return status should be returned.
* doc/sane-scsi.man: Fix typo: sg.h is in /usr/include/scsi, not
/usr/include.
* PROBLEMS: Add warning about updating Linux kernel after increasing
SG_BIG_BUFF.
1997-07-14 David Mosberger-Tang <davidm@azstarnet.com>
* frontend/xscanimage.c (quit_xscan): Destroy preview window before
quitting, so preview image gets saved if necessary.
* frontend/Makefile.in (LIBX11): New macro.
(LIBGTK): Ditto.
(xscanimage): Use $(LIBGTK) instead of $(LIBS).
(xcam): Use $(LIBGTK) instead of $(LIBS).
* configure.in (LIBX11): Define as all libraries necessary when
using X11.
(LIBGTK): Define as all libraries necessary when using GTK+.
* backend/mustek.c (sane_start): Don't send gamma in lineart and
halftone mode!
* doc/sane-scsi.man: Add info on how to setup BT958 card (contributed
by Jeremy <jeremy@xxedgexx.com>).
1997-07-13 David Mosberger-Tang <davidm@azstarnet.com>
* doc/sane-scsi.man: Add info on FreeBSD.
1997-07-12 David Mosberger-Tang <davidm@azstarnet.com>
* ltmain.sh: Installed libtool-1.0-nomode patch.
* configure.in (AC_PROG_RANLIB): Change to AM_PROG_RANLIB.
1997-07-11 David Mosberger-Tang <davidm@azstarnet.com>
* ltmain.sh: Upgrade to libtool-1.0.
* ltconfig: Ditto.
* config.guess: Ditto.
* config.sub: Ditto.
* aclocal.m4: Ditto.
1997-07-08 David Mosberger-Tang <davidm@azstarnet.com>
* Version 0.61 released.
* backend/Makefile.in (LIBLIB_FUNCS): Mention snprintf.
* backend/umax-struct.h (LINEART, HALFTONE, GREYSCALE, RGB): Move
the pound sign to the beginning of the line.
* backend/umax-scsidef.h: Ditto for all indendent #defines in this
file.
* backend/umax-scsi.c: Ditto for all # directives in here.
* frontend/saned.c [HAVE_LIBC_H]: Include <libc.h>.
1997-07-07 David Mosberger-Tang <davidm@azstarnet.com>
* backend/net.c [HAVE_LIBC_H]: Include <libc.h>.
* lib/usleep.c: New file (adapted from glibc).
* lib/strndup.c: Move #ifndef HAVE_STRNDUP up so nothing
except <config.h> gets included unless really needed.
Include <sys/types.h> to get size_t defined.
* lib/snprintf.c (vsnprintf): Rename from vplp_snprintf.
(snprintf): Rename from plp_snprintf.
* include/sane/config.h.in: Add #undef HAVE_USLEEP. Add #undef
HAVE_IO_CAM_CAM_H.
* configure.in: Test ${ac_cv_prog_gcc} instead of $CC to find out
whether we're dealing with gcc. Test for io/cam/cam.h header.
(AC_C_INLINE): Add.
(AC_CHECK_FUNCS): Mention usleep.
Check for Xext after checking for X11 since on some platforms,
linking against Xext requires functions from X11.
* backend/umax.c (PATH_MAX): Define as 1024 if undefined.
* backend/Makefile.in (CONFIGS): Don't add $(srcdir) prefix.
(LIBLIB_FUNCS): Mention usleep.
(install): Invoke $(LIBTOOL) $(MINST) --finish $(libdir) in
a final step. Correct installation rule for config files.
1997-07-06 David Mosberger-Tang <davidm@azstarnet.com>
* sanei/sanei_scsi.c (sanei_scsi_cmd): New variable RESULT.
1997-07-05 David Mosberger-Tang <davidm@azstarnet.com>
* sanei/sanei_scsi.c (sanei_scsi_cmd): Improve BSD version based
on patch by Amancio Hasty <hasty@rah.star-gate.com>.
(BSD_INTERFACE): Rename from NETBSD_INTERFACE (FreeBSD uses the
same interface).
* configure.in (CPPFLAGS): Check for scsireq_enter in libscsi.a.
* doc/Makefile.in (SECT5): Mention sane-scsi.5.
* doc/sane-scsi.man: New file.
* doc/sane-umax.man: Add SEE ALSO section mentioning sane-scsi(5).
* doc/sane-mustek.man: Ditto.
* doc/scanimage.man: Mention sane-umax(5).
* doc/xscanimage.man: Ditto.
* doc/saned.man: Ditto.
* configure.in (AC_TYPE_PID_T): Add.
* include/sane/config.h.in: Add undef of pid_t.
1997-07-04 David Mosberger-Tang <davidm@azstarnet.com>
* lib/sigprocmask.c (sigprocmask): Use hardcoded values instead
of SIG_BLOCK, SIG_UNBLOCK, and SIG_SETPROCMASK.
1997-07-03 David Mosberger-Tang <davidm@azstarnet.com>
* configure.in (CPPFLAGS): Remove -D_POSIX_SOURCE. We can't define
it safely since it causes select() related typedefs and defines
to go away under FreeBSD, for example.
1997-07-02 David Mosberger-Tang <davidm@azstarnet.com>
* configure.in (CPPFLAGS): Put -D_GNU_SOURCE and -D_POSIX_SOURCE
in CPPFLAGS, not CFLAGS.
* doc/sane-umax.man: Change SG_BIG_BUFF example from 128KB to
127.5KB.
* doc/sane-mustek.man: Ditto. Mention DTC3181E together with
DTCT436.
* frontend/gtkglue.c (gsg_create_dialog): Initialize dialog->advanced
to TRUE so "dumb" frontends will show all options.
* frontend/xscanimage.c (device_dialog): Turn off advanced options
by default.
* configure.in (AC_CHECK_TYPE): Check for u_long and u_int.
Check for scsireq_t.
* sanei/sanei_scsi.c: Don't define scsireq_t here.
* include/sane/config.h.in: Add undef of u_long, u_int, and
scsireq_t.
1997-07-01 David Mosberger-Tang <davidm@azstarnet.com>
* frontend/xscanimage.c (quit_xscan): No longer call
preview_destroy() since that now gets called as part of
the "destroy" callback.
* backend/hp.c (attach) [PREFER_DEVICEPIXEL]: Use device-pixel
unit commands instead of decipoint commands so things work on a 5p
as well (contributed by NOGAYA Shigeki
<nogaya@mbox.kyoto-inet.or.jp>).
(sane_start) [PREFER_DEVICEPIXEL]: Convert from mm to pixels.
* frontend/preview.c (input_available): Break out of per-bit loop
when done with one line (fix contributed by NOGAYA Shigeki
<nogaya@mbox.kyoto-inet.or.jp>).
* frontend/xscanimage.c (input_available): Ditto.
* doc/sane-umax.man: Rename SCSI id to Product id to reduce
confusion.
* doc/sane-hp.man: Ditto.
* doc/sane-mustek.man: Ditto.
* backend/mustek.c (wait_ready): Ignore errors during wait_ready().
With 3-pass scanners, ncr810 driver returns EIO while the scanner
is getting ready for pass 2 or 3.
1997-06-30 David Mosberger-Tang <davidm@azstarnet.com>
* backend/mustek.c (sense_handler): Print debug info if we
find unknown sense result.
* sanei/sanei_scsi.c (sanei_scsi_cmd): Consider sense_buffer[]
only when result != 0.
* frontend/scanimage.c (sighandler): Change return value type
from void to RETSIGTYPE (from <sane/config.h>).
* doc/sane-mustek.man: Mention problems with MSFS-12000SP.
* backend/umax.c (sane_start): Don't use C++ style line comments.
* backend/umax-scsi.c (umax_do_scsi_cmd): Use sigemptyset() to clear
out signal set. Include <sane/config.h>.
* frontend/saned.c [HAVE_SYS_SELECT_H]: Include <sys/select.h>.
* include/sane/config.h.in: Mention HAVE_SYS_SELECT_H.
Thu Jun 26 10:19:50 1997 David Mosberger-Tang <davidm@azstarnet.com>
* README: Mention permissions on generic SCSI device.
Tue Jun 24 17:35:52 1997 David Mosberger-Tang <davidm@azstarnet.com>
* doc/xscanimage.man: Fix spacing.
* doc/sane-dll.man: Mention how list of pre-loaded backends
can be changed.
Sun Jun 22 08:29:47 1997 David Mosberger-Tang <davidm@azstarnet.com>
* PROBLEMS: Add note on SCSI device names under OpenStep.
* sanei/sanei_scsi.c (sanei_scsi_cmd): Fix various minor bugs.
(sanei_scsi_open): Add support for OpenStep.
* backend/Makefile.in (install): Replace 'ln -f -s' with `rm -f',
`ln -s' sequence. OpenStep doesn't support the -f option at all.
Fri Jun 20 07:30:18 1997 David Mosberger-Tang <davidm@azstarnet.com>
* doc/sane-qcam.man: Updated B&W status.
* sanei/sanei_save_values.c [HAVE_LIBC_H]: Include <libc.h>.
* sanei/sanei_load_values.c: Ditto.
* lib/sigprocmask.c: New file.
* lib/strdup.c: Ditto.
* lib/Makefile.in (LIBLIB_OBJS): Mention strdup.o and sigprocmask.o.
(LIBLIB_LTOBJS): Mention strdup.lo and sigprocmask.lo.
(liblib.a): Use $(RANLIB) instead of -ranlib.
* include/sane/sanei_backend.h [!HAVE_SIGPROCMASK]: Define
compatibility macros sigset_t, sigemptyset(), sigfillset(),
sigaddset(), sigdelset(), and sigaction().
Define macro SIGACTION.
* frontend/saned.c (HAVE_VARARG_MACROS): Don't define unless we
have at least gcc 2.6.
* include/sane/sanei_debug.h Ditto. Use HAVE_VARARG_MACROS
instead of __GNUC__.
* sanei/sanei_init_debug.c: Ditto.
* configure.in (AC_PROG_RANLIB): Mention.
(CFLAGS): Move up near the beginning and add -D_POSIX_SOURCE.
(AC_CHECK_HEADERS): Test for libc.h.
(AC_TYPE_SIGNAL): Mention.
(AC_CHECK_FUNCS): Check for sigprocmask.
* backend/net.c (sane_init): Honor SANE_NET_HOSTS even if
net.conf does not exist.
* backend/mustek.c (sane_start): Use "struct SIGACTION" so it's
easier to make code work on platforms that don't support
sigprocmask().
* backend/umax.c (sane_start): Ditto.
* ltmain.sh: Upgrade to libtool-0.9h.
* ltconfig: Ditto.
* config.guess: Ditto.
* config.sub: Ditto.
* aclocal.m4: Ditto.
Thu Jun 19 08:26:33 1997 David Mosberger-Tang <davidm@azstarnet.com>
* configure.in (V_MINOR): Update forgotten version number...
* backend/qcam.c (reader_process): Scale 4 and 6 bpp to 8 bpp.
* backend/mustek.h (MUSTEK_FLAG_LD_NONE): New flag.
* backend/mustek.c (attach): Turn on MUSTEK_FLAG_LD_NONE for
MSF-06000SP (this fixes the problems for Andreas Gaumann
<gg261@appl2.hrz.uni-siegen.de>).
(attach): Print debug message when MUSTEK_FLAG_LD_NONE is on.
(line_distance): Fix up ld correction only if MUSTEK_FLAG_LD_NONE
is not on.
Wed Jun 18 15:42:25 1997 David Mosberger-Tang <davidm@azstarnet.com>
* doc/sane.tex (section{Image Data Format}}): Clarify
what valid bit-depths are.
Tue Jun 17 07:47:51 1997 David Mosberger-Tang <davidm@azstarnet.com>
* backend/qcam.c (sane_get_parameters): Test for != QC_COLOR
instead of == QC_MONO. Apparently, there are several versions
of the monochrome camera.
(qc_setscanmode): Ditto.
* lib/snprintf.c: Update with latest version (also includes
license information now).
* sane-0.6.lsm (Author): Update Tristan Tarrant's email address.
* AUTHORS: Ditto.
* frontend/xscanimage.c: Ditto.
Sun Jun 15 10:08:44 1997 David Mosberger-Tang <davidm@azstarnet.com>
* doc/xscanimage.man: Add section on how to run xscanimage under
the GIMP.
* frontend/xscanimage.c (init) [HAVE_LIBGIMP_GIMP_H]: Call
gtk_rc_parse() with gimp_gtk_rc() to get space-saving layout of
The GIMP. (Suggested by Sven Neumann.)
* sanei/sanei_scsi.c (sanei_scsi_cmd): Add NeXTStep/OpenStep
implementation.
(sanei_scsi_cmd): Adjust NetBSD version to make it more like
NeXTStep/OpenStep version.
* configure.in (AC_CHECK_HEADERS): Mention bsd/dev/scsireg.h.
Thu Jun 19 15:19:38 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
* backend/umax-scsi.c: Parameterize slightly more so that the
build succeeds on non-Linux platforms.
* Makefile.in, backend/Makefile.in, doc/Makefile.in,
frontend/Makefile.in (install): Fail immediately if any
installation fails. Use mkinstalldirs to create all installation
directories.
Sat Jun 14 11:07:13 1997 David Mosberger-Tang <davidm@azstarnet.com>
* Version 0.6 released.
* frontend/preview.c (preview_new): Connect "destroy" signal
so we notice if window manager closes our window.
(top_destroyed): New function.
* frontend/xscanimage.c (scan_preview): Make it robust against
preview_new() returning NULL and connect "destroy" signal so we
notice when the window manager closes the preview window.
(preview_window_destroyed): New function.
* LICENSE: New file.
* backend/dll.c: Change license from GPL to relaxed GPL.
* backend/hp.c: Ditto.
* backend/hp.h: Ditto.
* backend/mustek.c: Ditto.
* backend/mustek.h: Ditto.
* backend/net.c: Ditto.
* backend/net.h: Ditto.
* backend/pint.c: Ditto.
* backend/pint.h: Ditto.
* backend/pnm.c: Ditto.
* backend/pnm.h: Ditto.
* backend/qcam.c: Ditto.
* backend/qcam.h: Ditto.
* sanei/sanei_codec_ascii.c: Ditto.
* sanei/sanei_codec_bin.c: Ditto.
* sanei/sanei_constrain_value.c: Ditto.
* sanei/sanei_init_debug.c: Ditto.
* sanei/sanei_load_values.c: Ditto.
* sanei/sanei_net.c: Ditto.
* sanei/sanei_save_valus.c: Ditto.
* sanei/sanei_scsi.c: Ditto.
* sanei/sanei_wire.c: Ditto.
Fri Jun 13 18:35:47 1997 David Mosberger-Tang <davidm@azstarnet.com>
* lib/snprintf.c: New file (Patrick Powell).
* frontend/xcam.c: Use guint32 and guint32 instead of u_int16_t
and u_int32_t (Tristan Tarrant).
* doc/Makefile.in (SECT5): Mention sane-umax.5.
* configure.in (PACKAGE_VERSION): Check for snprintf (Tristan
Tarrant).
* backend/dll.conf: Mention umax.
* backend/umax-scanner.h: New file (from umax-0.5.5).
* backend/umax-scsi.c: Ditto.
* backend/umax-scsidef.h: Ditto.
* backend/umax-struct.h: Ditto.
* backend/umax-uc630.h: Ditto.
* backend/umax-ug630.h: Ditto.
* backend/umax-umax.c: Ditto.
* backend/umax.conf: Ditto.
* backend/umax.h: Ditto.
* doc/sane-umax.5: Ditto.
* backend/Makefile.in (PRELOADABLE_BACKENDS): Mention umax.
(libsane-umax.la): List dependencies for umax library.
* COPYING: New file.
* include/sane/config.h.in: Add #undef HAVE_SNPRINTF.
Tue Jun 10 21:00:34 1997 David Mosberger-Tang <davidm@azstarnet.com>
* ltmain.sh: Upgrade to libtool-0.9g.
Sun Jun 8 21:24:27 1997 David Mosberger-Tang <davidm@azstarnet.com>
* backend/dll.c (load): Also check SHLIB_PATH (HP-UX) and LIBPATH
(AIX).
* include/sane/config.h.in: Remove HAVE_GTK_GTKCURVE_H.
Sat Jun 7 11:19:57 1997 David Mosberger-Tang <davidm@azstarnet.com>
* frontend/xscanimage.c (pref_device_save): Call gsg_sync() before
saving the values.
* backend/Makefile.in (libsane-%.la): Add -export-dynamic flag.
* frontend/xscanimage.c (query): Rename "/Extensions/" to "/Xtns/"
to reflect gimp-0.99.10 changes.
(query): Don't put in separator---it confuses gimp.
(main): Temporarily install a null print handler so gimp_main()
doesn't produce any ugly messages when program gets invoked in
stand-alone mode.
* ltconfig: Upgrade libtool to version 0.9f.
* ltmain.sh: Ditto.
* config.guess: Ditto.
* config.sub: Ditto.
* frontend/Makefile.in (install): Define MKDIR as
$(top_srcdir)/mkinstallldirs.
Use $(MKDIR) instead of mkdir.
* backend/Makefile.in (install): Ditto.
* doc/Makefile.in (install): Ditto.
* mkinstalldirs: New file (from maint-0.1g).
Tue Jun 3 10:29:17 1997 David Mosberger-Tang <davidm@azstarnet.com>
* LEVEL2: New file.
Sun Jun 1 13:26:40 1997 David Mosberger-Tang <davidm@azstarnet.com>
* doc/Makefile.in (LATEX, DLH): New macros.
(sane.ind): Prefix source filename with $(srcdir).
(ps): Ditto.
(html): Ditto.
* doc/net.tex (subsection{SANE_NET_START}): Document member
byte_order.
* sanei/sanei_net.c (sanei_w_start_reply): (De-)code BYTE_ORDER
member.
* frontend/saned.c (byte_order): New union.
(process_request): Initialize byte_order member.
* include/sane/sanei_net.h (SANE_Net_Byte_Order): New enum type.
(SANE_Start_Reply): New member BYTE_ORDER.
Wed May 28 17:13:43 1997 David Mosberger-Tang <davidm@azstarnet.com>
* doc/Makefile.in (install): Create $(mandir)/man1 and
$(mandir)/man5 if necessary.
Tue May 27 09:31:39 1997 David Mosberger-Tang <davidm@azstarnet.com>
* backend/hp.c: Remove s7_range and s1_range.
(attach): Add inquiry of min/max brightness/contrast and fill in
dev->brightness_range and dev->contrast_range accordingly.
(init_options): Use s->hw->brightness_range instead of s7_range.
Use s->hw->contrast_range instead of s7_range. Disable contrast
option if min value is same as max value.
* backend/hp.h (struct HP_Device): Add members BRIGHTNESS_RANGE
and CONTRAST_RANGE.
* sanei/sanei_scsi.c (sanei_scsi_open): Add more debug info.
Mon May 26 10:43:51 1997 David Mosberger-Tang <davidm@azstarnet.com>
* sanei/Makefile.in: Add definitions for VPATH, srcdir, top_srcdir,
and top_builddir.
(INCLUDES): Move -I directives from CPPFLAGS to this macro. Also
search in $(srcdir), $(top_builddir)/include, and
$(top_srcdir)/include.
* lib/Makefile.in: Add definitions for VPATH, srcdir, top_srcdir,
and top_builddir.
(INCLUDES): Move -I directives from CPPFLAGS to this macro. Also
search in $(srcdir), $(top_builddir)/include, and
$(top_srcdir)/include.
* include/Makefile.in: New file.
* frontend/Makefile.in: Add definitions for VPATH, srcdir, top_srcdir,
and top_builddir.
(INCLUDES): Also search in $(srcdir), $(top_builddir)/include, and
$(top_srcdir)/include.
(install): Add $(srcdir) prefix to sane-style.rc.
* doc/Makefile.in: Add definitions for VPATH, srcdir, top_srcdir,
and top_builddir.
(%.1 %.5): Use $^ instead of $* so source file can be found even
when in a different directory.
* configure.in (AC_OUTPUT): Create (dummy) include/Makefile to
ensure include directory exists in build tree.
* backend/Makefile.in: Add definitions for VPATH, srcdir,
top_srcdir, and top_builddir.
(INCLUDES): Also search in $(srcdir), $(top_builddir)/include, and
$(top_srcdir)/include.
(CONFIGS): Add $(srcdir) prefix.
(%-s.c): Ditto.
* Makefile.in (INSTALLED_INCLUDES): Mention include/sane/config.h.
Add definitions for VPATH, srcdir, top_srcdir, and top_builddir.
(INSTALLED_INCLUDES): Change include/sane to $(top_srcdir)/include/sane
and use "addprefix" function to add prefix.
Thu May 15 07:26:06 1997 David Mosberger-Tang <davidm@azstarnet.com>
* doc/sane-mustek.man (Model): Add entry for MFC-600CD.
(Model): Mention AHA-2940.
* frontend/xscanimage.c (scan_dialog): Move gsg_sync() to here
(from scan_start()).
* backend/mustek.c (init_options): Disable brightness/contrast for
1-pass scanners only (in color mode).
Wed May 14 09:17:02 1997 David Mosberger-Tang <davidm@azstarnet.com>
* backend/mustek.c: Add ax_brightness_range, ax_contrast_range.
(init_options): Use ax_brightness_range/ax_contrast_range for
brightness/contrast option when using a 3-pass scanner.
(encode_percentage): Remove extraneous division by 100.0.
* doc/sane-mustek.man (Model): Add MFS-12000CX entry.
Mon May 12 07:58:34 1997 David Mosberger-Tang <davidm@azstarnet.com>
* frontend/scanimage.c (main): Shorten help string so it fits in
80 characters.
* frontend/preview.c (paint_image): Only increment height if
height < p->image_height.
Sat May 10 14:43:05 1997 David Mosberger-Tang <davidm@azstarnet.com>
* Version 0.57 released.
* backend/mustek.c (attach): Fix range to 220x300mm.
(init_options): Initialize OPT_PREVIEW and OPT_GRAY_PREVIEW.
(sane_control_option): Handle OPT_PREVIEW and OPT_GRAY_PREVIEW.
Do not allow OPT_NUM_OPTS to be set.
(sane_get_parameters): Except for s->params.format and
s->params.last_frame, do not change any parameters when scanning
is in progress.
(sane_start): Handle mono-chrome previewing.
* backend/mustek.h (Mustek_Option): Add OPT_PREVIEW and
OPT_GRAY_PREVIEW.
* frontend/progress.c (progress_new): Fix position of progress bar
window to (progress_x,progress_y).
* frontend/gtkglue.c (panel_build): Skip Preview option.
Thu May 8 19:39:48 1997 David Mosberger-Tang <davidm@azstarnet.com>
* doc/scanimage.man: New file.
* doc/Makefile.in (SECT1): Mention scanimage.1.
* backend/dll.conf: Add hp to dll.conf.
Wed May 7 07:28:18 1997 David Mosberger-Tang <davidm@azstarnet.com>
* include/sane/sanei_scsi.h (SANEI_SCSI_Sense_Handler): New type.
(sanei_scsi_close): Add SENSE_HANDLER argument (NULL means no
special handler needed).
* backend/hp.c (sane_start): Pass 0 as SENSE_HANDLER argument.
(attach): Ditto.
* backend/mustek.c (sense_handler): Rename from request_sense and
simplify.
Remove all explicit request-sense calls.
* sanei/sanei_scsi.c: Include <stdlib.h>.
(num_handlers_alloced): New variable.
(sense_handler): Ditto.
(sanei_scsi_open): Add SENSE_HANDLER argument. Stash it away in
SENSE_HANDLER array if non-NULL.
(sanei_scsi_cmd) [HAVE_SYS_SG]: Invoke SENSE_HANDLER[FD] if it
exists and is non-NULL and we have a valid sense-buffer.
(sanei_scsi_cmd) [HAVE_SYS_SCSI]: Ditto.
(sanei_scsi_close): Reset SENSE_HANDLER[FD] to NULL if it exists.
* frontend/xcam.c: Include <sane/config.h>.
* configure.in: Add a big fat warning that PROBLEMS should be
read before running any programs.
* PROBLEMS: Add info on how to avoid damaging Mustek scanners.
Mon May 5 07:06:54 1997 David Mosberger-Tang <davidm@azstarnet.com>
* doc/sane.tex (chapter{Contact Information}): Fix URL.
* doc/net.tex: Add missing sections. Make into chapter.
* backend/pint.README: Remove.
* backend/dll.c (ASSERT_SPACE): Call malloc() when devlist is
NULL. SunOS realloc() returns NULL otherwise.
* backend/net.c (ASSERT_SPACE): Ditto.
Sun May 4 09:21:48 1997 David Mosberger-Tang <davidm@azstarnet.com>
* frontend/saned.c (EXIT_SUCCESS): Define as 0 if not defined by
stdlib.h.
* frontend/scanimage.c: Include <sys/types.h>.
* backend/qcam.c: Define PATH_MAX as 1024 if limits.h doesn't
define it.
* backend/dll.c: Ditto.
* backend/hp.c: Ditto.
* backend/mustek.c: Ditto.
* backend/net.c: Ditto.
* backend/pint.c: Ditto.
* backend/qcam.c: Ditto.
* frontend/xscanimage.c: Ditto.
* frontend/xcam.c: Ditto.
* frontend/preview.c: Ditto.
* sanei/sanei_wire.c: Include <sane/config.h>.
* sanei/sanei_net.c: Ditto.
* sanei/sanei_codec_ascii.c: Ditto.
* sanei/sanei_codec_bin.c: Ditto.
* sanei/sanei_save_values.c: Ditto.
* backend/net.c: Ditto.
* frontend/saned.c: Ditto.
* configure.in (AC_CHECK_HEADERS): Mention
/usr/src/linux/include/scsi/sg.h.
* include/sane/config.h.in: Add
#undef HAVE__USR_SRC_LINUX_INCLUDE_SCSI_SG_H.
* sanei/sanei_scsi.c [HAVE__USR_SRC_LINUX_INCLUDE_SCSI_SG_H]:
Include "/usr/src/linux/include/scsi/sg.
(sanei_scsi_cmd): Use Linux version if either HAVE_SCSI_SG_H or
HAVE__USR_SRC_LINUX_INCLUDE_SCSI_SG_H are defined.
* doc/xscanimage.man: Rename --no-shm to --no-xshm.
Mon Apr 28 09:55:02 1997 David Mosberger-Tang <davidm@azstarnet.com>
* Version 0.56 released.
* backend/qcam.c (sane_open): Move disabling of despeckle-filter
for b&w cameras to here (from init_options()).
* frontend/preferences.c: Add missing default value for FILENAME.
* backend/qcam.h: Add QC_BW_SET_CONTRAST,
QC_BW_AUTO_ADJUST_OFFSET, and QC_BW_GET_OFFSET. * backend/qcam.c
(sane_start): Use QC_BW_SET_CONTRAST when dealing with B&W camera.
Fix computation of QC_SET_NUM_H value. [Based on Guido Muensch's
patches.]
* frontend/scanimage.c (advance): Move out-of-memory error message
from scan_it() to here.
(scan_it): When height is known a priori, allocate one extra line
to avoid realloc() when image has been filled.
* backend/hp.c (BACKEND_NAME): Define as hp (reported by Henryk
Paluch).
* backend/mustek.c (request_sense): Increase result size from 4 to
16 bytes to shut up aha1542 driver (reported by Mathias Lautner).
* frontend/scanimage.c (advance): Fix memory allocation logic
(bug reported by Matthias Lautner).
* doc/sane-dll.man: Clarify that pre-loaded backends are not
affected by dll.conf.
* doc/sane-pint.man: New file (contributed by Gordon Matzigkeit).
* backend/dll.c (RTLD_NOW): Define as 0 if dlfcn.h doesn't define
it.
Wed Apr 23 23:03:47 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
* backend/Makefile.in, frontend/Makefile.in: Specify full
filenames, rather than just the directory name for INSTALL
destinations. This Automakeism helps debugging when the target
directory doesn't exist.
* include/sane/config.h.in (HAVE_SYS_SCANIO_H): Define, for PINT's
sake.
* backend/pint.c: Prefix sane includes with <sane/...>.
* backend/dll.c (RTLD_NOW): Paramaterize, so that RTLD_LAZY is
used if RTLD_NOW is not defined.
(load): Try looking up the symbol with a leading underscore, if we
can't find it the first time.
Make dynamic loading conditional on HAVE_DLOPEN rather than the
library and header file.
* configure.in (enable_dynamic): Disable dynamic loading if the
system doesn't have dlopen.
Tue Apr 22 00:17:41 1997 David Mosberger-Tang <davidm@azstarnet.com>
* Version 0.55 released.
* frontend/xscanimage.c (browse_filename_callback): Initialize
FILENAME before calling gsg_get_filename().
* doc/sane.tex: Change obsolete \driver{DVIps} into DVIps document
style option.
* frontend/xscanimage.c (query): Update to new command name
length.
Mon Apr 21 08:27:28 1997 David Mosberger-Tang <davidm@azstarnet.com>
* doc/Makefile.in (install): Add rule to install man-pages.
(%.1 %.5): Add rule to generate man-pages (by substituting
actual paths).
(SECT1): New variable.
(SECT5): Ditto.
(MANPAGES): Ditto.
* doc/sane-pnm.man: New file.
* backend/pnm.README: Deleted.
* doc/sane-hp.man: New file.
* backend/hp.README: Deleted.
* doc/saned.man: New file.
* frontend/saned.README: Deleted.
* doc/sane-qcam.man: New file.
* backend/qcam.README: Deleted.
* doc/sane-mustek.man: New file.
* backend/mustek.README: Deleted.
* doc/sane-net.man: New file.
* backend/net.README: Deleted.
* doc/sane-dll.man: New file.
* backend/dll.README: Deleted.
* doc/xscanimage.man: New file.
* frontend/xscanimage.README: Deleted.
* frontend/preview.c (event_handler): Restore preview image only
if preferences.preserve_preview is TRUE.
* frontend/xscanimage.c (preview_options_dialog): Add an option
to control whether the preview image should be preserved.
* sanei/sanei_load_values.c (sanei_load_values): Copy string value
into temporary buffer that is opt->size bytes long. Then pass copy
to sane_control_option().
* AUTHORS (Backends): Updated according to recent changes.
* doc/sane.tex (The SANE Application Programmer Interface (API)):
Fix typo: replace () by {}.
* PROJECTS (Backend): Update PINT entry.
* frontend/xscanimage.c (prog_name): New variable.
(input_available): Use prog_name instead of hardcoding "xscan".
(preview_options_ok_callback): Ditto.
(preview_options_dialog): Ditto.
(usage): Ditto.
(interface): Ditto.
(main): Initialize prog_name.
* frontend/scanimage.c: Update for new name (scanimage instead of
scan).
* frontend/Makefile.in (SCAN_OBJS): Rename sources to xscanimage.c
and scanimage.c as well.
Sun Apr 20 09:09:06 1997 David Mosberger-Tang <davidm@azstarnet.com>
* Version 0.54 released.
* sanei/Makefile.in (LIBSANEI_LTOBJS): Remove @LTALLOCA@.
(LIBSANEI_OBJS): Remove @ALLOCA@.
* lib/Makefile.in: Invoke $(LIBTOOL) with --mode arg to avoid
depending on command names. Prefix $(LIBTOOL) invocation with
@-sign to reduce verbosity.
* frontend/Makefile.in: Ditto.
* backend/Makefile.in: Ditto.
* sanei/Makefile.in: Ditto.
* frontend/saned.c (_PATH_HEQUIV): Define if not defined yet..
* configure.in: Check for libgimp/gimp.h instead of -lgimp since
-lgimp cannot be linked by itself (it has an unresolved reference
to PLUG_IN_INFO).
* lib/strndup.c (strndup): Include <stdlib.h>.
* frontend/xscanimage.README: Update.
* sanei/sanei_scsi.c: Add missing "int" type in front of
sanei_scsi_max_request_size.
* configure.in: Check for -lintl, -lsocket, and -lnsl for
braindamaged SVR4 systems.
* frontend/scan.c (scan_it): Initialize min with 0xff, not ~0
(Sun CC complains otherwise).
* backend/Makefile.in: Use "ln -f -s", not "ln -sf", Solaris doesn't
like the former. Grrr...
* lib/alloca.c: Don't use xmalloc().
* frontend/saned.c (store_reclen): Declare BUF as a pointer to
SANE_Byte (not char).
(do_scan): Ditto.
* frontend/scan.c (fetch_options): Cast opt->name to (char *)
to suppress (spurious) warning.
* backend/dll.c (sane_init): Skip preloaded backends with no name.
* backend/hp.c (inquire): Cast BUF to (char *) to avoid warning.
(sane_read): Change type of NREAD to size_t (from ssize_t).
* include/sane/sanei_backend.h (u_int16_t): Define u_int8_t,
u_int16_t, and u_int32_t if necessary.
* include/sane/sane.h (sane_strstatus): Remove non-ANSI "const".
* backend/sane_strstatus.c (sane_strstatus): Ditto
* include/sane/sanei_debug.h (DBG): Define alternate version for
non-GNU C compilers.
* sanei/sanei_init_debug.c (sanei_debug) [!__GNUC__]: New function.
(max_level) [!__GNUC__]: New variable.
* include/sane/sanei_wire.h: Fix typo in prototype for
sanei_w_value_type.
* configure.in: Test for gtk_check_button_new() in libgtk.
* lib/Makefile.in (CPPFLAGS): Add -I../include/sane.
* frontend/scan.c (STRIP_HEIGHT): New macro.
(advance): Use above macro instead of hard-coding value.
(scan_it): Ditto.
(scan_it): Print error when out of memory.
* frontend/sane-style.rc: Make the curve in the graph red.
* frontend/preview.c (XSERVER_WITH_BUGGY_VISUALS): Define for now.
(preview_new): Avoid push_visual()/get_visual() since it seems to
cause problems with some XFree86 servers (and may be others as
well).
* frontend/preferences.h: Add member ADVANCED.
* frontend/preferences.c: Initialize member ADVANCED and add
an option descriptor for it.
* frontend/gtkglue.c (panel_build): Layout panel different: all
options are now in one column (advanced options are at the
bottom). The graph widget (if any), will be shown in a separate
column to the right of the options. Display a group only when
there is at least one option in it. Create graph widget if there
is at least one vector-valued option.
(gsg_sync): New function.
(gsg_set_advanced): Ditto.
(gsg_message_dialog_active): Rename from SHOWING_MESSAGE and make
global.
* frontend/gtkglue.h (GSGDialog): Rename member NOTEBOOK to
MAIN_HBOX. Add members ADVANCED_VBOX and ADVANCED.
* frontend/gtkglue.c (group_new): New function.
(curve_new): Ditto.
(vector_new): Ditto.
* backend/mustek.c (init_options): Initialize OPT_CUSTOM_GAMMA.
(sane_control_option): Handle OPT_CUSTOM_GAMMA.
* backend/mustek.h (OPT_CUSTOM_GAMMA): New option.
* configure.in (AC_CONFIG_HEADER): Update for new location.
* include/sane/config.h.in: Move to here from include/config.h.
* *.[ch]: Replace <config.h> with <sane/config.h> (except for
files in lib.
* frontend/saned.README: saned moved from bin/saned to sbin/saned.
* configure.in (AC_CHECK_HEADERS): Check for gtk/gtkcurve.h.
* backend/mustek.c (init_options): Undo changes of April 18th.
* frontend/Makefile.in (install): Install $(BINPROGS) in $(bindir)
and $(SBINPROGS) in $(sbindir).
(SBINPROGS): New variable.
(BINPROGS): Ditto.
(PROGRAMS): Define as concatenation of the two vars above.
(install): Create $(bindir) and $(sbindir) if necessary.
Sat Apr 19 18:21:02 1997 David Mosberger-Tang <davidm@azstarnet.com>
* frontend/Makefile.in (scanimage): Rename "scan" binary to
"scanimage" to avoid name-collision with MH's scan command.
* backend/mustek.c (gamma_correction): Update according to new
gamma-table handling.
* backend/mustek.h: Declare gamma_table as 4 arrays of 256 words
each.
* backend/mustek.c (sane_control_option): Add missing return after
setting OPT_GAMMA_VECTOR.
* frontend/progress.h: Protect against multiple inclusion using
macro progress_h, not __PROGRESS_H__ (names starting with
underscores are reserved for libc/system).
* frontend/gtkglue.c: Remove include of <gtk.h>.
* frontend/xcam.c: Ditto.
* frontend/xscan.c: Ditto.
* frontend/gtkglue.h: Include <gtk/gtk.h> instead of <gtk.h>.
* frontend/progress.c: Ditto.
* Makefile.in (install): Install headerfiles.
(INSTALLED_INCLUDES): List of header files that need to be
installed.
Sat Apr 19 18:15:03 1997 Michael K. Johnson <johnsonm@redhat.com>
* */*.[ch]: Prefix sane-includes with <sane/...>.
include/sane*: Move to include/sane subdirectory.
Sat Apr 19 08:25:36 1997 David Mosberger-Tang <davidm@azstarnet.com>
* frontend/gtkglue.c (set_option): Add missing return and use
snprintf instead of sprintf.
* frontend/xscan.c (update_param): Multiply size by 3 if we're
dealing with a frame from a 3-pass image.
Fri Apr 18 07:28:46 1997 David Mosberger-Tang <davidm@azstarnet.com>
* backend/mustek.c (init_options): Mark all vector options as
SANE_CAP_ADVANCED.
* frontend/scan.c (scan_it): Fail if advance() fails.
Thu Apr 17 08:59:00 1997 David Mosberger-Tang <davidm@azstarnet.com>
* backend/mustek.c (sane_read): Add debug statement.
(reader_process): Remove extraneous if-statement that had the
effect of not passing along any data in 3-pass mode.
Wed Apr 16 09:16:01 1997 David Mosberger-Tang <davidm@azstarnet.com>
* frontend/preview.h: Add member CANCEL.
* frontend/preview.c (scan_start): Make p->cancel sensitive.
(scan_done): Make p->cancel insensitive.
(preview_new): Set p->cancel insensitive.
* frontend/preferences.h (Preferences): Add member "filename".
* frontend/preferences.c: Initialize new member "filename".
Declare member "filename" as a string.
* frontend/xscan.c (device_dialog): Rename "Files" to "File".
(quit_xscan): Call pref_xscan_save() before exiting. Replace
global variable filename by preferences.filename.
* frontend/xcam.c (main): Ditto.
* PROBLEMS: New file.
* frontend/gtkglue.c (scale_new): Set the adjustment page size to
0.0. Make horizontal scale 200 pixels wide.
* frontend/xscan.c (device_dialog): Move gtk_widget_show
(ScanWin.shell) after pref_device_restore (0, 0).
(pref_device_restore): Make arg-less since callback arguments must
not be used.
(device_dialog): Remove dummy args from call to pref_device_restore().
* include/saneopts.h (SANE_TITLE_SCAN_TL_X, SANE_TITLE_SCAN_TL_Y,
SANE_TITLE_SCAN_BR_X, SANE_TITLE_SCAN_BR_Y): Shorten titles.
* frontend/xcam.c (main): Move gtk_widget_show(win.shell) to end
of function.
* backend/mustek.c (attach): Turn on MUSTEK_FLAG_USE_EIGHTS for
MFS-12000CX.
(sane_get_parameters): Must not depend on s->mode in this routine,
since s->mode is valid only once scanning has begun.
Tue Apr 15 23:06:17 1997 David Mosberger-Tang <davidm@azstarnet.com>
* backend/mustek.c (sane_start): Issue SCAN_AREA and BACKTRACK
commands even during second and third pass.
(sane_get_parameters): Be sure to properly update the
params.format member during second and third pass.
Sat Apr 12 11:40:52 1997 David Mosberger-Tang <davidm@azstarnet.com>
* frontend/scan.c (STRIP_HEIGHT): New macro.
(scan_it): Fix typo: test parm.lines instead of image.height.
* backend/pnm.c (hand_scanner): New variable.
(sane_control_option): Handle setting/reading of HAND_SCANNER
option.
(getparmfromfile): Set parms.lines to -1 when simulating
hand-scanner.
(sod): Add hand-scanner option descriptor.
* frontend/gtkglue.c (panel_build): Move gtk_widget_show
(notebook) to the very of this function. This works around the
notebook redrawing problems. Define WORKING_NOTEBOOK.
* frontend/xscan.c (interface): Call quit_xscan() if
device_dialog() did not end up with a non-NULL dialog.
(quit_xscan): Add missing exit() call.
* backend/mustek.c (attach): Print more debug info on detected
scanner (1 vs 3-pass, ADF & TA support).
(start_scan): Fix typo in code selecting the three-pass color filter.
Sun Apr 13 23:53:02 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
* backend/pint.c, backend/pint.h, backend/pint.README: Added to
distribution.
Fri Apr 11 22:04:17 1997 David Mosberger-Tang <davidm@azstarnet.com>
* Version 0.53 released.
* frontend/xscan.c: Default to "out.pnm" instead of "out.ppm".
* backend/mustek.c (get_image_status): Add debug message.
(sane_start): Only divide pixels_per_line by three if we're doing
a one-pass color scan.
(do_eof): New function.
(sane_read): Call do_eof() when done with a frame.
(do_cancel): Call do_eof().
* frontend/scan.c (write_pnm_header): New function.
(advance): Ditto.
(scan_it): Modify to support three-pass scanning and scanning of
images whose height is not known a priori (hand-held scanners).
Wed Apr 9 14:39:59 1997 David Mosberger-Tang <davidm@azstarnet.com>
* frontend/xscan.c (ok_choose_dialog_callback): Make
argument-free.
(select_device_callback): Declare event as second argument and
call ok_choose_dialog_callback() if the callback was invoked
through a double-click.
(choose_device): Register select_device_callback() as
"button_press_event" handler instead of as "clicked" so we can
catch double-clicks.
Tue Apr 8 10:31:47 1997 David Mosberger-Tang <davidm@azstarnet.com>
* frontend/xscan.c (init): Enable gtk_rc_parse() code (GTK-0.99.7
requires patch for gtkstyle.c).
* backend/hp.c (attach): Fix parenthization to shut up gcc.
Mon Apr 7 13:08:45 1997 David Mosberger-Tang <davidm@azstarnet.com>
* frontend/xscan.c (preview_options_dialog): Rename "changed_text"
to "changed" to reflect latest GTK version.
(device_dialog): Ditto.
* frontend/gtkglue.c (text_entry_new): Ditto.
* Version 0.52 released.
* AUTHORS: Various updates.
* backend/mustek.README: Add Adaptec info.
* backend/mustek.c (sane_start): Call wait_ready() before any
other scanner command.
(wait_ready): New function.
(attach): Call wait_ready() instead of open-coding it.
* doc/sane.tex (subsection{\code{sane\_strstatus}}): Include
net.tex.
* doc/net.tex: New file.
Thu Apr 3 08:51:13 1997 David Mosberger-Tang <davidm@azstarnet.com>
* frontend/xscan.c (update_param): Change type of SIZE to u_long
(from long) since under NetBSD there seem to be some odd sign
problems otherwise (compiler bug?).
Wed Apr 2 07:15:41 1997 David Mosberger-Tang <davidm@azstarnet.com>
* backend/mustek.c (sane_read): Always deliver EOF after reading
0 bytes.
* backend/qcam.c (reader_process): Fine-tune pixel interpolation.
(despeckle32): Ignore last red pixel in every line (it's always
black). Switch red and blue pixel location (the Connectix docs
are wrong).
* backend/mustek.c (start_scan): Fix typo that caused start[4] to
be set incorrectly.
* frontend/preview.c: Include <sys/param.h> to get PATH_MAX.
Tue Apr 1 18:45:14 1997 David Mosberger-Tang <davidm@azstarnet.com>
* backend/qcam.c (despeckle): New function.
(despeckle32): Ditto.
(init_options): Initialize OPT_DESPECKLE.
(reader_process): Add despeckling support.
(sane_control_option): Ditto.
(sane_start): Initialize req.despeckle.
* backend/qcam.h: New member DESPECKLE.
* frontend/preview.c (restore_option): Fix typo: it should be
SANE_ACTION_SET_VALUE (not _get_).
* backend/mustek.c (attach): Turn on MUSTEK_FLAG_USE_EIGHTS for
MFS-06000CX.
* backend/hp.c (attach): Allow both TYPE_PROCESSOR (0x03) and
TYPE_SCANNER (0x06) as the first inquiry byte---some scanners use
the former, others the latter.
* Version 0.51 released.
* configure.in: Check for gtk_tooltips_new in libgtk.
Mon Mar 31 14:42:56 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
* frontend/scan.c (main): Added full_optstring, to allow getopt to
do full parsing of the option arguments.
* backend/pnm.c (getparmfromfile): Need to round up the number of
bytes per line when scanning bitmaps.
Mon Mar 31 07:48:50 1997 David Mosberger-Tang <davidm@azstarnet.com>
* backend/qcam.c (attach): Send a dummy black-level command. The
first black-level command aftera camera reset doesn't appear to
"take."
* lib/strndup.c: Correct typo: HAVE_STRDUP -> HAVE_STRNDUP.
* frontend/xscan.c (pref_set_tooltips): New function.
(pref_build_menu): Build tooltip submenu.
* frontend/preferences.h: New member TOOLTIPS_ENABLED.
* frontend/preferences.c: Add entry for TOOLTIPS_ENABLED.
* frontend/gtkglue.h: Add members TOOLTIPS, TOOLTIPS_FG, and
TOOLTIPS_BG.
* frontend/gtkglue.c (set_tooltip): New function.
(autobutton_new): Add argument TOOLTIPS and add button-description
via set_tooltip().
(button_new): New args TOOLTIPS & DESC. Set DESC as tooltip help
string.
(scale_new): Ditto.
(option_menu_new): Ditto.
(text_entry_new): Ditto.
(panel_destroy): Destroy dialog tooltips as well.
(panel_build): Create tooltips and allocate colors for it; pass
new args to above functions.
(gsg_set_tooltips): New function.
* Version 0.5 released.
* backend/Makefile.in (install): Add missing double-quotes to
$(LIBS) and $(CONFIGS). Also create a symlink for libsane.a.
* ltconfig: Revert back to version 0.9.
* ltmain.sh: Ditto.
* frontend/scan.c (print_option): Substitute our own help string
for -x and -y options.
(main): Remove BROKEN_GETOPT code.
* frontend/Makefile.in (CPPFLAGS): Undo yesterday's change.
* lib/getopt1.c: Ditto.
* lib/getopt.c: Ditto.
* frontend/scan.c (main): Add some clever getopt () hackery to
work around multi-scan getopt () bug (patch by Gord Matzigkeit).
* backend/qcam.README: Correct path of configuration file.
Sun Mar 30 21:42:12 1997 David Mosberger-Tang <davidm@azstarnet.com>
* frontend/Makefile.in (CPPFLAGS): Add back -DBROKEN_GETOPT.
* frontend/scan.c (main): Reinstantiate BROKEN_GETOPT code.
getopt_long() is _STILL_ broken. ;-(
* lib/getopt.c: Use this code if __GNU_LIBRARY__ <= 6. Early
versions of glibc had a buggy getopt().
* lib/getopt1.c: Ditto.
* frontend/Makefile.in (xscan): Mention $(LIBSANEI).
* frontend/xscan.c: Include <libgimp/gimp.h>, not <gimp.h>.
* Makefile.in (distclean): Mention libtool.
* configure.in (AC_CHECK_FUNCS): Ditto.
* include/config.h.in: Add undef of STRSEP.
* sanei/sane_strstatus.c: Move to backend directory to minimize
chance of confusing this with a SANE-internal routine.
* sanei/Makefile.in (LIBSANEI_OBJS): Remove sane_strstatus.o.
(LIBSANEI_LTOBJS): Remove sane_strstatus.lo.
* backend/Makefile.in (libsane-%.la): Mention sane_strstatus.lo
explicitly (every SANE backend library MUST define this function
so we can switch backends at will).
* frontend/Makefile.in (SCAN_OBJS): Remove getopt.o, getopt1.o.
* Makefile.in (SUBDIRS): Mention lib as first directory.
* configure.in (AC_OUTPUT): Mention lib/Makefile.
* lib/strsep.c: New file.
* lib/strndup.c: Ditto.
* lib/Makefile.in: Ditto.
* sanei/test_wire.c (main): Initialize codecs through
sanei_w_init().
* sanei/sanei_codec_bin.c (sanei_codec_bin_init): Ditto.
* sanei/sanei_codec_ascii.c (sanei_codec_ascii_init): Remove
w->buffer initalization---this function should be called through
sanei_w_init () only.
* sanei/sanei_scsi.c: Rename _sanei_scsi_max_request_size to
sanei_scsi_max_request_size.
* backend/mustek.c (reader_process): Rename macro
SANEI_SCSI_MAX_REQUEST_SIZE to variable
sanei_scsi_max_request_size.
* include/sanei_scsi.h: Rename _sanei_scsi_max_request_size to
sanei_scsi_max_request_size (names with a leading underscore are
reserved for libc/system).
(SANEI_SCSI_MAX_REQUEST_SIZE): Remove macro.
* frontend/scan.c (main): Add a brief description of the program.
* frontend/getopt.c: Move to lib.
* frontend/getopt1.c: Ditto.
* backend/pnm.c (enum ppm_type): Remove non-ANSI trailing comma.
Correct struct indentation.
* include/lalloca.h: Isolate alloca cruft in this file.
* frontend/gtkglue.c: Include lalloca.h in place of alloca hack.
* frontend/dll.c: Ditto.
* frontend/scan.c: Ditto.
* sanei/sanei_load_values.c: Ditto.
* sanei/sanei_scsi.c: Ditto.
Sat Mar 29 00:14:37 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
* backend/pnm.c (sane_read): Slurp in RGB files all at once,
rather than limping along three bytes at a time.
* frontend/xscan.c (advance): Only define if HAVE_LIBGIMP.
* backend/pnm.c (sane_read, sane_start, getparmfromfile): Handle
grayscale and monochrome bitmapped PNM files.
* frontend/scan.c (main): Remove BROKEN_GETOPT workaround---the
new getopt() works properly when making multiple passes over the
argument list.
Fri Mar 28 21:33:36 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
* configure.in: Make the QuickCam device conditional on whether or
not the ioperm function exists.
* sanei/sanei_scsi.c: created a stubbed version of sanei_scsi_cmd.
* frontend/scan.c (main): Only print error messages to stderr.
Use fputs or fputc when it is possible to avoid printf.
* sanei/sanei_wire.c (sanei_w_array, sanei_w_ptr, sanei_w_init),
sanei/sanei_save_values.c (sanei_save_values),
sanei/sanei_codec_ascii.c (ascii_w_string): Return an error if
malloc fails.
* sanei/test_wire.c (main): Added --readonly flag to help test
wire robustness.
* backend/Makefile.in (LIBSANEI): Deleted the `EXTRA' variable,
and used the convenience library, ../sanei/libsanei.a.
Sat Mar 29 10:19:58 1997 David Mosberger-Tang <davidm@azstarnet.com>
* doc/sane.tex: Change version from 0.42 to 0.5.
* README: Add pointer to frontend & backend specific README files.
* backend/net.c (connect_dev): Ensure dev->ctl gets closed and
reset to -1 in case of failure.
* configure.in: Look for gtk_preview_new() in libgtk so we can
ignore old GTK versions against which we can't build.
* (config.sub): Replace with version that comes with
autoconf-2.12. The version that came with libtool-0.9
doesn't like i686-unknown-linux.
Fri Mar 28 13:12:17 1997 David Mosberger-Tang <davidm@azstarnet.com>
* doc/sane.tex (subsection{sane_get_select_fd}): Remove extraneous
backslash.
* backend/stubs.c (sane_cancel): Don't return anything.
* include/sane.h: Remove trailing comma (for -pedantic).
* frontend/xscan.c (interface): Complain when trying to call
a device that's unavailable.
(select_device_callback): Correct prototype.
* frontend/xcam.c (main): Remove unused variable `label.'
* backend/net.c (sane_cancel): Call SANE_NET_CANCEL.
(sane_start): Handle failure of SANE_NET_START.
* frontend/saned.c (process_request): Implement SANE_NET_CANCEL.
* frontend/gtkglue.h (GSGDialogElement): Remove member "label".
* frontend/gtkglue.c: Update accordingly.
(button_new): Use gtk_check_button_new_with_label () to simplify
this function.
* frontend/gtkglue.c (unit_string): New function.
(panel_build): Append unit_string () to option's title if
the unit is not SANE_UNIT_NONE. Use "title" instead of opt->title
when creating widgets.
* frontend/preview.c (preview_update): Compute width/height as
(max - min + eps) where eps is 1 for integer coordinates and
SANE_UNFIX(1) for fixed-point coordinates.
(display_partial_image): Support different scaling in x/y
direction. In the case where surface_unit == SANE_UNIT_PIXEL,
compute xscale/yscale based on the ratio between the _expected_
width/height and the actual width/height. If they're not equal,
the backend must be doing some scaling (e.g., transfer-scale in
the qcam backend).
* frontend/xscan.c (init): Disable gtk_rc_parse () calls for now
since gtk styles seem to be a bit buggy right now.
(scan_done): Remove input_tag if it is >= 0.
* frontend/gtkglue.c: Include <preferences.h>.
(panel_build): For fixed-point range-constraints scale min/max/quant
based on the preferred metric.
(scale_update): Ditto.
(gsg_update_scan_window): Ditto.
* backend/mustek.c (sane_control_option): For OPT_GAMMA_VECTOR_*
options, fail with SANE_STATUS_INVAL if the vector has zero length
(i.e., hasn't been set yet).
* frontend/progress.c (progress_new): Don't make Cancel the
default-button---it's too easy to cancel by mistake otherwise.
* frontend/sane-style.rc: New file.
* frontend/xscan.c (init): New function. Parse gtk_rc_parse ()
on /usr/local/share/sane-style.rc and ~/.sane/sane-style.rc if
those files exist.
* configure.in (CPPFLAGS): Add PATH_SANE_DATA_DIR.
* frontend/gtkglue.c (gsg_warning): New function.
(gsg_message): New function.
(gsg_error): Implement in terms of gsg_message ().
Thu Mar 27 16:52:27 1997 David Mosberger-Tang <davidm@azstarnet.com>
* frontend/gtkglue.c (gsg_make_path): Terminate buffer with '\0'
before attempting mkdir().
* frontend/xcam.c (main): Use gtk_menu_item_new_label () instead
of gtk_label_new ()/gtk_menu_item_new ().
* frontend/preview.c (establish_selection): Invoke
param_change_callback only if non-NULL.
(preview_update): Convert scale range to inches if that's user's
preference.
* frontend/xcam.c (delayed_switch): New function.
(device_activate_callback): Call delayed_switch() rather than
executing that code directly. Pete tells me GTK is not designed
to have a widget rebuilt while a submenu is active.
* frontend/gtkglue.c (panel_build): Avoid using notebook widget
until GTK+ has been fixed.
(idle_handler): New function: rebuild dialog if dialog->rebuild is
set.
(set_option): Set dialog->rebuild to TRUE and schedule
idle_handler() rather than directly calling panel_rebuild(). Pete
tells me GTK is not designed to have a widget rebuilt while a
submenu is active.
(gsg_refresh_dialog): Ditto.
Thu Mar 27 14:54:23 1997 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
* backend/Makefile.in: Converted all for statements that might be
empty to use a temporary list variable.
* frontend/Makefile.in (scan): Added getopt.o, getopt1.o to scan
dependencies.
* frontend/getopt.c, frontend/getopt1.c, include/getopt.h: Added
to the distribution.
* backend/net.c (connect_dev), frontend/saned.c (main): Don't use
TCP_NODELAY if it has not been defined. Look up tcp protocol
number if SOL_TCP is not defined.
* sanei/test_wire.c (main): lseek after changing direction, or the
direction change ends up at the end of the output file.
Added option parsing, a usage message, and other cleanups.
* sanei/sanei_codec_ascii.c (sanei_codec_ascii_init),
sanei/sanei_codec_bin.c (sanei_codec_bin_init): Initialize the
wire if it has a 0-length buffer.
* sanei/sanei_wire.c (sanei_w_init): Only call the codec_init_func
if it is not NULL.
* sanei/sanei_scsi.c: Parameterize inclusion of generic SCSI
headers based on HAVE_SCSI_SG_H, HAVE_SYS_SCSI_H, or
HAVE_SYS_SCSIIO_H.
* configure.in (AC_CHECK_HEADERS): Check for scsi/sg.h,
sys/scsi.h, and sys/scsiio.h.
* sanei/sanei_load_values.c, sanei/sanei_scsi.c, backend/dll.c:
Replaced unconditional alloca.h include with the cruft suggested
by the Autoconf manual.
* sanei/alloca.c: Add to distribution.
* sanei/Makefile.in: Eliminate GNU make dependencies, and use
@ALLOCA@ and @LTALLOCA@ as appropriate.
* configure.in (AM_FUNC_ALLOCA): Use it.
* aclocal.m4 (AM_FUNC_ALLOCA): Define it.
Wed Mar 26 17:25:49 1997 David Mosberger-Tang <davidm@azstarnet.com>
* sanei/sanei_wire.c (sanei_w_status): Update *v only when decoding.
(sanei_w_bool): Ditto.
(sanei_w_constraint_type): Ditto.
(sanei_w_value_type): Ditto.
(sanei_w_unit): Ditto.
(sanei_w_action): Ditto.
(sanei_w_frame): Ditto.
* frontend/xscan.c (quit_xscan): Always invoke gtk_main_quit()
(not just in standalone mode).
(quit_callback): Correct prototype.
* backend/pnm.c (sod): Fix doc-string for option "three-pass".
* frontend/xscan.c (advance): New function.
(input_available): Support 1 bpp frames. Call advance() instead
of open-coding it. Add RED/GREEN/BLUE frame support in GIMP mode.
Complain when encountering unknown depth.
(ScanWin): add member first_frame.
(scan_start): Initialize first_frame and frame_offset in
GIMP mode.
* Integrate force unidirectional mode patch by Guido Muesch
<odiug@faho.rwth-aachen.de>:
* backend/qcam.c (attach): Force uni-directional mode if port
address starts with `u'.
(attach): Add debug statement to print QCam version.
* Integrate 3-pass patches by Heiko
<Heiko.Schroeder@Post.RWTH-Aachen.de>:
* backend/mustek.cb
(scan_area_and_windows): Use 1/8" mode when MUSTEK_FLAG_USE_EIGHTS
is on (instead of pixel unit).
(mode_select): Set bit 3 in mode byte only if
MUSTEK_FLAG_USE_EIGHTS is off.
(encode_resolution): Don't do funky encoding for 3-pass scanners
in 10% resolution mode. It seems the docs are wrong and the
actual scanners require a much simpler setup.
* frontend/preview.h: Add include of <sys/types.h>.
Sat Mar 22 16:37:34 1997 David Mosberger-Tang <davidm@azstarnet.com>
* frontend/xscan.c (input_available): Reset ScanWin.x to zero at
the end of each line.
(input_available): Reset tile_offset to zero after updating a
tile.
(scan_done): Call gimp_display_new() to display the newly acquired
image. Draw final few lines of image if image height is not a multiple
of the tile-height.
* frontend/saned.c (process_request): quit when receiving
unexpected procedure number---ignoring is dangerous.
* backend/dll.c (load): Fix off-by-one bug in allocation of
libname.
* frontend/xcam.c (prompt_for_device_name): Move grab-default
call behind signal_connect since otherwise the default action
won't work.
* frontend/xscan.c (choose_device): Let "Ok" button be the one
that gets activated by default (by hitting the Return key).
* frontend/preview.c (preview_destroy): Rename save_preview_image
to preserve_preview_image.
* frontend/preview.h: Ditto.
* frontend/preview.c (restore_preview_image): New function.
(preview_destroy): Save preview image if it exists.
(preview_scan): New parameter SELECTION_ONLY. If true,
preview-scanning is limited to the selected area.
* frontend/xscan.c (scan_done): Call quit_xscan() to exit.
(quit_xscan): Destroy preview if ScanWin.preview is non-NULL.
* frontend/preview.c (draw_selection): Don't draw if p->gc is
NULL (i.e., if windows aren't mapped yet).
* frontend/xscan.c: Move HAVE_LIBGIMP-specific code further
down (past the type & global variable decls).
* configure.in (CPPFLAGS): Make --disable-shared impy
--enable-preload.
* include/config.h.in: Add HAVE_STRNDUP.
Fri Mar 21 00:01:00 1997 David Mosberger-Tang <davidm@azstarnet.com>
* sanei/sanei_scsi.c (sanei_scsi_cmd): Implemented FreeBSD
version (untested).
* sanei/sanei_load_values.c: Include <alloca.h>
* frontend/preview.c (update_selection): New function to set
selection based on current scan-area option values.
(preview_update): Call update_selection ().
* sanei/sanei_save_values.c: Add copyright notice.
* sanei/sanei_load_values.c: Add copyright notice and explanation
of algorithm.
(BITS_PER_LONG): New macro.
(SET): Ditto.
(IS_SET): Ditto.
(sanei_load_values): Add variables caused_reload and keep_going to
keep track of what options caused a reload_option and whether
the whole option-value setting process should be repeated.
* include/config.h.in: Add #undef HAVE_LIBGIMP.
* frontend/xscan.c: Put all GIMP-dependencies inside
#ifdef HAVE_LIBGIMP.
Include <config.h>.
* sanei/sanei_wire.c (sanei_w_init): Initialize status to 0.
(sanei_w_free): Preserve existing direction and do not flush i/o.
(sanei_w_space): Return EINVAL if reading 0 bytes.
Thu Mar 20 09:11:21 1997 David Mosberger-Tang <davidm@azstarnet.com>
* frontend/gtkglue.h (dev_name): New member.
* frontend/gtkglue.c (gsg_destroy_dialog): free dialog->dev_name.
(gsg_create_dialog): Keep copy of device name in dev_name member.
* include/sanei_backend.h: Move stubs into backend/stubs.c and
define redirection macros only if STUBS is not defined.
* backend/stubs.c: New file.
* configure.in (AC_PROG_RANLIB): Removed. No longer needed with
libtool.
* (frontend/Makefile.in): Adapt to libtool.
* (backend/Makefile.in): Ditto.
* (sanei/Makefile.in): Ditto.
* backend/mustek.c (attach): Check result[0] == 0x06 to find out
whether we're dealing with a scanner (rather than attemting to
find the string "SCANNER" ).
* backend/hp.c (sane_read): Initialize nread with max_len, not
*len.
(sane_get_parameters): Add missing `== 0' comparison for strcmp()
calls.
(inquire): Generalize so we can inquire any quantity and improve
parsing.
(attach): Use reasonable default value if inquiry of a quantity
fails.
(sane_start): Report error if inquiry of a scan parameter fails.
Wed Mar 19 18:03:38 1997 David Mosberger-Tang <davidm@azstarnet.com>
* frontend/xcam.c (prompt_for_device_name): grab default for OK
button (doesn't seem to work, though).
* frontend/progress.c (progress_new): Connect progress_cancel()
via signal_connect(), not signal_connect_object() and pass P, not
P->SHELL.
(progress_cancel): Don't free progress structure (must be done by
app).
* frontend/xscan.c (input_available): New function.
(scan_done): Ditto.
(scan_start): Ditto.
(progress_cancel): Simply call sane_cancel().
(scan_dialog): Moved most of the code to above functions.
* frontend/gtkglue.c (get_filename_button_clicked): New function.
(gsg_get_filename): Ditto.
* frontend/xscan.c (scan_dialog): Do not quit xscan when in
standalone mode.
(scan_dialog): Prompt for output filename in standalone mode.
(filename): New variable.
* backend/pnm.c (sane_control_option): Remove "pnm." prefix
in debug messages.
* backend/qcam.c (sane_cancel): Remove "qcam." prefix in debug
messages.
* backend/mustek.c: Remove "mustek." prefix in debug messages.
Tue Mar 18 17:30:29 1997 David Mosberger-Tang <davidm@azstarnet.com>
* backend/mustek.c (sane_close): Remove superfluous "[mustek]" in
debug string.
* sanei/sanei_scsi.c (sanei_scsi_cmd): Implement HP-UX version
of this function (untested).
* backend/qcam.c (reader_process): Enable code to handle 4 bpp
and 6 bpp cases.
Thu Mar 13 13:15:21 1997 David Mosberger-Tang <davidm@azstarnet.com>
* doc/sane.tex (subsection{Scan Area Options}): Attempt to
clarify the meaning of "top-left" corner.
Tue Mar 11 07:12:53 1997 David Mosberger-Tang <davidm@azstarnet.com>
* frontend/gtkglue.c (panel_build): Fix typo in matching of
"resolution" option (missing == 0).
Mon Mar 10 20:19:06 1997 David Mosberger-Tang <davidm@azstarnet.com>
* Announced pre0.5 snapshot.
* backend/qcam.h: Make transfer-scale part of the "mode" group.
* backend/qcam.c (sane_read): Moved return of SANE_STATUS_EOF
behind test for delivering EOF.
* frontend/xscan.c (device_dialog): Relabel "Cancel" button to
"Quit".
* backend/qcam.c (init_options): Set SANE_CAP_ADVANCED for geometry
group.
* backend/mustek.c (init_options): Ditto.
* backend/pnm.c (pass, three_pass): New variables.
(sod): Add option "three-pass" to simulate a three-pass scanner.
(sane_control_option): Add support for three_pass option.
(getparmfromfile): In three-pass mode, set format and last_frame
based on `pass'.
(sane_start): If input file is open already, fail unless we're
scanning the next frame of a three-pass image.
(sane_read): Handle three-pass case.
Sun Mar 9 13:20:19 1997 David Mosberger-Tang <davidm@azstarnet.com>
* frontend/gtkglue.c (text_entry_callback): Only call
gtk_entry_set_text() if the backend modified the string. Otherwise,
infinite recursion occurs on any change (since the change results
in a change...).
* frontend/xcam.c (next_frame): Reset win.remaining to zero.
* backend/qcam.c (init_options): Set size of "resolution" option
to sizeof("High").
* doc/sane.tex (subsection{Scan Area Options}): Allow word-list
as a constraint.
* configure.in (CFLAGS): Add -D_GNU_SOURCE to CFLAGS since we
now depend on snprintf ().
* frontend/xscan.c (device_dialog): Fix typo: PixelHeight should
be > 0, not == 0 in order for us to create the preview window.
(device_dialog): Ditto.
(device_dialog): Add ScanWin.preview to frame container.
Sat Mar 8 10:19:41 1997 David Mosberger-Tang <davidm@azstarnet.com>
* doc/sane.tex (subsection{sane_get_select_fd}): Clarify what
must happen when the end of a frame has been reached.
* frontend/xcam.c (input_available): Stop when sane_read() returns
0 bytes. Fix typo: win.data needs to be set to dst, not src, on
exit.
* backend/qcam.h (read_fd): New member.
* backend/qcam.c (sane_get_select_fd): Return read_fd instead of
from_child.
(sane_open): Initialize s->read_fd to -1.
(sane_close): Close s->select_fd if >= 0.
(sane_start): Make read_fd dup() of s->from_child.
(sane_cancel): Close s->read_fd if >= 0.
(sane_set_io_mode): Modify s->read_fd instead of s->from_child.
* frontend/scan.c: Include <sanei.h> for NELEMS macro.
* frontend/xcam.c: Ditto.
* configure.in (CPPFLAGS): Add defines for V_MAJOR and V_MINOR.
(V_MAJOR, V_MINOR): New variables.
* sanei/Makefile.in (SANEI_OBJS): Mention sanei_net.o.
* include/sanei_net.h: New file (split from sanei_wire.h).
* sanei/sanei_net.c: New file (split from sanei_wire.c).
* configure.in: Add -Wall to CFLAGS when using gcc.
* frontend/Makefile.in (saned): List -lsanei before -lsane
so saned never depends on sanei_*-routines that may be present
in -lsane (the only dependencies for that library must be
on sane_* names).
* backend/Makefile.in (LIBS): Remove -ldl (configure will add
it if available).
(SHLDFLAGS): Use -usanei_init instead of --whole-archive option.
(SHLDPOSTFLAGS): Remove --no-whole-archive.
* backend/dll.c: Add include of <config.h>.
(DYNAMIC): New macro. Defined it dynamic loading support is
available and enabled.
Include <dlfcn.h> only when DYNAMIC is defined.
(load): Make no-op when DYNAMIC is not defined.
(sane_exit): Never call dlclose() if DYNAMIC is not defined.
* include/sanei_scsi.h: Rename from genscsi.h and rename prefix
from `genscsi_' to `sanei_scsi_'.
* sanei/sanei_scsi.c: Ditto.
* backend/mustek.c: Rename `genscsi_' to `sanei_scsi_'.
* configure.in: Check for availability of -ldl and <dlfcn.h>.
Fri Mar 7 15:21:38 1997 David Mosberger-Tang <davidm@azstarnet.com>
* sanei/sanei_wire.c: New file.
* sanei/sanei_codec_bin.c: Ditto.
* sanei/sanei_codec_ascii.c: Ditto.
* backend/dll.c (sane_exit): Call dlclose() only if handle is
non-NULL.
(sane_init): Chain together preloaded backends.
* backend/qcam.c (attach): Make static.
(sighandler): Ditto.
(qc_getstatus): Ditto.
* backend/mustek.c (attach): Ditto.
* backend/dll.c (op_name): Remove `sane_' prefix.
* sanei/sanei_init_debug.c (sanei_init_debug): Upcase backend
name when building environment variable name.
* backend/genscsi.c: Make use of sanei_debug.h.
* backend/mustek.c: Adapt to use sanei_backend.h.
* backend/net.c: Ditto.
* backend/pnm.c: Ditto.
* backend/qcam.c: Ditto.
* backend/dll.c (sane_exit): Fix typo that resulted in the
last backend not being exited.
Thu Mar 6 21:25:27 1997 David Mosberger-Tang <davidm@azstarnet.com>
* doc/sane.tex (subsection{\code{sane\_init}}): Allow
authorization callbacks during sane_start() but not during
sane_read().
Tue Mar 4 21:04:16 1997 David Mosberger-Tang <davidm@azstarnet.com>
* backend/mustek.c (sane_close): Print debug message when trying
to close an unknown handle.
Thu Feb 27 18:10:20 1997 David Mosberger-Tang <davidm@azstarnet.com>
* doc/sane.tex (chapter{Contact Information}\label{chap:contact}):
Add `listserv.' to mailing list address---seems to be needed for
subscriptions etc.
Sun Feb 9 12:54:20 1997 David Mosberger-Tang <davidm@azstarnet.com>
* backend/mustek.README: Add pointer to Ingmar's 53c400 patch.
Sat Feb 8 11:49:24 1997 David Mosberger-Tang <davidm@azstarnet.com>
* backend/mustek.c (line_distance): Add more debug output.
Fri Feb 7 19:21:36 1997 David Mosberger-Tang <davidm@azstarnet.com>
* backend/mustek.c (line_distance): Remove erroneous #ifdef
around FACTOR and COLOR.
* doc/sane.tex (subsection{sane_init}): Make username/password
fixed length arrays so no malloc/free magic is needed.
(subsection{Preview Mode Option}): New section.
* include/sane.h: Ditto.
* include/sane.h (SANE_Char): New type.
Tue Feb 4 18:47:52 1997 David Mosberger-Tang <davidm@azstarnet.com>
* backend/mustek.c (sane_get_parameters): Correct typo: replace
s->pass with s->params.format.
Fri Jan 31 16:16:26 1997 David Mosberger-Tang <davidm@azstarnet.com>
* backend/mustek.c (attach): Print debug message when using
special line-distance algorithm.
Enable special line-distance algorithm only for firmware
revisions < 1.02.
Determine fw revision based on INQUIRY result.
Thu Jan 30 21:22:38 1997 David Mosberger-Tang <davidm@azstarnet.com>
* doc/sane.tex (section{Attaching to a SANE backend}): Rename
metanet -> net, netproxy -> saned, metadl -> dll and update
hierarchy figure as well. Added autolum meta backend as a
filter example.
* TODO: Rename metanet -> net, metadl -> dll.
* AUTHORS (Frontends): Rename metanet -> net, metadl -> dll,
mention saned and xcam and sort entries alphabetically.
* backend/net.c (sane_control_option): Replace all occurances of
metanet with net.
* backend/net.README: Ditto.
Rename env var METANETHOST to SANE_NET_HOST.
* backend/dll.README: Replace all occurances of metadl with dll.
* backend/dll.c: Ditto.
* backend/dll.conf: Comment out metanet since it's a bit of a
security risk (no authentication just yet).
* backend/Makefile.in (CONFIGS): New macro (list of config files)
(install): Change install rule so existing configuration files
are not overwritten.
Replace all occurances of metanet with net.
(V_MINOR): Bump up to 43.
Tue Jan 28 08:17:18 1997 David Mosberger-Tang <davidm@azstarnet.com>
* frontend/Makefile (saned): Mention -lsanei before -lsane so
saned does not incorrectly depend on sanei_printf/sanei_scanf in
-lsane (if it happens to define those symbols).
* backend/metanet.c (sane_init): Rename SANE_Authorization_Callback
to SANE_Auth_Callback.
* backend/mustek.c (sane_init): Ditto.
* backend/pnm.c (sane_init): Ditto.
* backend/metadl.c (sane_init): Ditto.
* frontend/saned.c (main): Put output socket in TCP_NODELAY mode.
Include of <sys/socket.h>
* backend/metanet.c (openit): Ditto.
Mon Jan 27 19:32:29 1997 David Mosberger-Tang <davidm@azstarnet.com>
* doc/sane.tex (subsection{Device Descriptor Type}): Change vendor
name "None" to "Noname".
* backend/pnm.c (dev): Change vendor name from "noname" to "Noname".
* include/sane.h (SANE_STATUS_ACCESS_DENIED): New status value.
* sanei/sane_strstatus.c (sane_strstatus): Return appropriate
status string.
* frontend/xscan.c (scan_dialog): Don't depend on first_frame
when creating image---the old code didn't work for R/G/B-only
frames anyhow, so there is no point pretending.
* include/sane.h (SANE_Parameters): Rename first_frame to
last_frame.
* backend/metanet.c (sane_get_parameters): Update accordingly.
* backend/qcam.c (sane_get_parameters): Ditto.
* frontend/saned.c (readcmd): Ditto.
* frontend/test.c (testsane): Ditto.
* backend/mustek.c (sane_get_parameters): Set last_frame unless
the current pass is acquiring a red- or green-only frame.
* doc/sane.tex (subsection{sane_get_parameters)): Change
FIRST_FRAME into LAST_FRAME.
* backend/metanet.c: Initialize PEER with -1.
(sane_get_select_fd): Return PEER and succeed if not negative.
* include/netsane.h (ns_printf, ns_scanf, netfd_wr, netfd_rd):
Remove (obsolete).
* frontend/saned.c: Increase STRBUF size to 32KB to get better
scan_read() throughput.
* include/sane.h (SANE_Athorization_Callback): Return void
(instead of int) and make USERNAME and PASSWORD (pointers to)
return values.
* frontend/saned.c (netsane_auth_callback): Update prototype.
* backend/metanet.c (sane_init): Move assignments out of
if-conditional for clarity (and to avoid gcc warning).
* sanei/sanei_printf.c: Include <memory.h>, <string.h>.
* backend/Makefile.in (libsane-mustek.a): Replace
../sanei/sane_strstatus.o with appropriately defined EXTRA
macro.
* backend/mustek.c (attach): Initialize ld.mode to MLD_NORMAL for
all scanners but MFS-12000SP.
(line_distance): In MD_MFS correction mode, do not issue LD
command.
(sane_close): Free s->ld.red_buf if non-NULL.
(fix_line_distance_mfs): New function.
(fix_line_distance_normal): Rename from fix_line_distance().
(reader_process): In MLD_MFS line-distance mode, call the
mfs-specific routine, not the normal one.
* backend/mustek.h (Mustek_Scanner): New members ld.red_buf,
ld.green_buf.
(MUSTEK_FLAG_LD_MFS): New flag to indicate when MFS-specific
line-distance correction is needed.
* backend/metanet.c: Fix up some minor formatting problems due
to indent.
* Merge in Andy's netsane diffs.
Sun Jan 26 00:04:22 1997 David Mosberger-Tang <davidm@azstarnet.com>
* frontend/xscan.c (zoom_in_preview): Ignore selections of zero
or negative width/height.
(set_max_selection): Use SANE_UNFIX() instead of open coding.
Adapted to use gtkglue.
* backend/metadl.c (sane_init): Grab authorization callback.
(authorization_callback): New variable.
(load): Pass authorization callback to init function.
* frontend/gtkglue.h (gsg_destroy_dialog): Add param_callback.
Sat Jan 25 17:35:52 1997 David Mosberger-Tang <davidm@azstarnet.com>
* frontend/Makefile.in (distclean): Mention $(TESTPROGRAMS).
* backend/metanet.c (copy_opt): Fix constraint-length computation.
* backend/metadl.c (sane_get_devices): Pass along LOCA_ONLY arg
to backend.
* frontend/xcam.c (main): Remove extraneous calls to gtk_exit()
and sane_exit().
* frontend/scan.c (main): Install sane_exit() as atexit handler.
* backend/metadl.c (sane_get_devices): Ignore NULL BE_LIST.
* frontend/saned.c (quit): New function.
(main): catch SIGALRM, and SIGPIPE.
* backend/metanet.c (sane_get_devices): Return empty list of
LOCAL_ONLY is TRUE.
* frontend/saned.c (readcmd): Don't take LOCAL arg from
request---always pass SANE_TRUE!
* doc/netprotocol.doc (sane_get_devices): Don't need LOCAL arg.
* include/sanei.h: Include <sane.h>.
* frontend/test.c (testsane): Print status message instead of
status code and make robust against failed calls. Use fprintf(stderr
instead of printf.
* backend/qcam.c (reader_process): Remove extraneous arg.
(reader_process): Declare `static' to make setjmp() safe.
* frontend/saned.c (readcmd): Delete unused variable schr_hlp.
(peerfp): New variable.
Rename ns_printf() to sanei_printf() and pass peerfp arg.
Rename ns_scanf() to sanei_scanf() and pass peerfp arg.
(say_helo): Make peerfp refer to fd 0.
* backend/metanet.c (openit): Return FILE*, not socket.
(openit): Return 0, not -1 in case of failure.
(peerfp): New variable.
Rename ns_printf() to sanei_printf() and pass peerfp arg.
Rename ns_scanf() to sanei_scanf() and pass peerfp arg.
* sanei/sane_strstatus.c: New file (in lieu of backend/sane.c)
* sanei/sanei_constrain_value.c: Ditto.
* sanei/sanei_init_debug.c: Ditto.
* sanei/sanei_scanf.c (ns_scanf): New file (based on Andy's
ns_scanf).
Use int8_t for 'c', int32_t for 'd'.
Include <sys/types.h>.
* sanei/sanei_printf.c (sanei_printf): New file (based on Andy's
ns_printf).
Use int8_t for 'c', int32_t for 'd'.
Include <sys/types.h>.
* include/netsane.h (CMD_SANE_STRS): Remove.
* backend/metanet.c: Include <errno.h>
(sane_strstatus): Remove.
* backend/Makefile.in (BACKENDS): Mention libsane-metanet.
* backend/metanet.c (openit): Use memcpy instead of bcopy. Use
inet_aton() instead of inet_addr(), don't prototype.
(sane_get_devices): Use strdup() instead of opencoding it.
(sane_get_devices): Don't append " (NS)" to modelname! Metanet
already prefixes the devicename with netsane, which is good
enough.
* backend/sanei.h (IF_DBG): New macro.
* PROJECTS (Backend): Mention saned, metanet, and autoadj.
(Frontend): New info.
* AUTHORS: Update to reflect sanescan -> xscan namechange.
Credit Andy for netsane.
Fri Jan 24 00:01:45 1997 David Mosberger-Tang <davidm@azstarnet.com>
* doc/sane.tex (subsection{\code{sane\_get\_option\_descriptor}}):
Define how long the returned option descriptor must remain valid.
* frontend/gtkglue.c (autobutton_update): Check for
SANE_INFO_RELOAD_OPTIONS.
(button_update): Ditto.
* frontend/xcam.c (main): Add device info label.
* backend/mustek.c (init_options): Make OPT_BRIGHTNESS and
OPT_CONTRAST inactive by default.
* frontend/xcam.c (exit_callback): Only call gsg_destroy_dialog()
if dialog is non-null.
Thu Jan 23 00:17:46 1997 David Mosberger-Tang <davidm@azstarnet.com>
* backend/mustek.c (sane_control_option): Return
SANE_STATUS_DEVICE_BUSY when attempting to set option during
scanning.
(sane_close): Call do_cancel(), not sane_cancel().
(sane_start): Ditto.
* backend/pnm.c (sod): Rename "File" group to "Source Selection".
* frontend/xcam.c (device_name_dialog_cancel): New function.
(device_name_dialog_ok): Ditto.
(prompt_for_device_name): Ditto.
(build_device_menu): Move "Rescan devices..." from build_files_menu()
to here. Add "Specify device name..." entry that invokes
prompt_for_device_name.
(play_stop_button): Ignore call if there is no device_dialog yet.
(main): Don't attempt to set preview size if there is no device
dialog yet.
* frontend/gtkglue.c (text_entry_callback): Don't ignore tab
key---it's used to switch focus!
* backend/qcam.c (qc_wait): Return read value so optimizer won't
be able to get rid of it easily.
(qc_lock_wait): Use same lockname as qcam-0.7d for
interoperability.
(reader_process): Explicitly do an enable_ports() in the reader
process. Linux/x86 doesn't inherit i/o port access rights.
* frontend/xcam.c (stop_camera): New function.
(input_available): Use stop_camera().
(next_frame): Ditto.
* backend/genscsi.c (genscsi_open): Add missing DBG_INIT(GENSCSI).
(genscsi_cmd): Return SANE_STATUS_DEVICE_BUSY if EBUSY is
returned.
* frontend/xcam.c (input_available): Fix line wrap for
SANE_FRAME_GRAY.
* include/sane.h: Remove old SANE_STATUS_AGAIN.
* backend/sane.c (sane_strstatus): Ditto.
* backend/mustek.c (sane_read): Return SANE_STATUS_GOOD, not AGAIN
when no data available.
(sane_start): Add debug printing.
(sane_set_io_mode): Fix typo: return SANE_STATUS_GOOD on success.
* backend/mustek.c (sane_control_option): Add support for
OPT_BACKTRACK.
(attach): Add lots of debug printing.
* backend/qcam.README: New file.
* backend/qcam.c (sane_control_option): Allow changing resolution
while scan is in progress, but set RELOAD_OPTIONS only if not
scanning already.
* frontend/xcam.c (canvas_events): Get rid of old debug messages.
* backend/qcam.c (sane_get_parameters): Update parameters only if
not scanning. This makes it possible to change certain options
(such as width/height while a scan is in progress).
(sane_control_option): Allow changing of image corners,
transfer-scale, and depth while scan is in progress. Set
RELOAD_PARAMS only if scan is not in progress.
(sane_start): Return DEVICE_BUSY if scan is in progress.
* configure.in (PACKAGE_VERSION): Version 0.41 released.
* backend/qcam.c (brightness_range): New variable.
(init_options): Use brightness_range instead of u8_range to
avoid going into bulb-mode accidentally.
Wed Jan 22 09:16:21 1997 David Mosberger-Tang <davidm@azstarnet.com>
* backend/qcam.c (reader_process): Correct typo: it's buf, not
buffer that we want to write out in high-res mode.
(qc_reset): New function.
(reader_process): Send at least one byte of data after receiving a
signal.
(sighandler): New function.
(sane_cancel): If a read request is outstanding, cancel request by
(a) sending SIGINT to reader process, (b) reading one byte of data
in blocking mode, and then (c) reading whatever is left in the
pipe in non-blocking mode.
(sane_read): Return SANE_STATUS_CANCELLED if SCANNING is not set.
* backend/qcam.h (QC_Scanner): Remove unused x/y fields.
* backend/qcam.c (sane_close): Call disable_ports().
(sane_init): Replace isblank() with isspace() (former is a GNU
extension).
(sane_control_option): Scale corner coordinates when switching
resolution and ensure they're always legal values.
(sane_close): Check for reader_pid >= 0 not != 0!
(sane_exit): Move disable_ports () from sane_close to here.
(sane_start): Keep track of when we're holding lock.
(sane_read): Release lock if s->holding_lock is TRUE and we
read a few bytes.
(sane_cancel): Release lock if it's being held.
* backend/qcam.c: Clean up unused variables.
Tue Jan 21 13:49:00 1997 David Mosberger-Tang <davidm@azstarnet.com>
* backend/qcam.c (sane_control_option): Keep track of changes to
option values.
(sane_get_select_fd): Implemented.
(sane_set_io_mode): Ditto.
(reader_process): New function.
(sane_start): Modify to use reader_process().
* backend/qcam.h: (struct QC_Scanner): New field value_changed.
Mon Jan 20 22:11:11 1997 David Mosberger-Tang <davidm@azstarnet.com>
* backend/metadl.c (sane_open): Correctly handle case where
backend name is empty.
Sun Jan 19 10:29:43 1997 David Mosberger-Tang <davidm@azstarnet.com>
* backend/qcam.c (attach): Add qc_wait() calls after each
write_lpcontrol() call to ensure reliable communication.
(attach): Add debug output in case of failure.
* Version 0.4 released.
Sat Jan 18 10:12:40 1997 David Mosberger-Tang <davidm@azstarnet.com>
* frontend/xscan.c (get_scan_size): Handle case where scan
width/height is of type SANE_TYPE_INT.
(get_scan_size): If width/height unit is pixels and the height is
less than 500 pixels, use a ratio of 1.
(device_dialog): Call update_complete_dialog() to ensure inactive
options do not show (there probably is a better solution to this).
* frontend/scan.c (main): Compute bottom-right position as
top-left + width/height - 1 (the - 1 is new and necessary and
works both for fixed and integer values).
(print_option): Insert line-break when column >= 79 (not 80) to
leave last column blank (better when running inside Emacs, for
example).
(main): Fix typos: case 't': window[2] -> window[3], switch short
option names for top/left.
(print_option): Print current option values (except for vectors).
(fetch_options): Another off by one bug: width is br_x|y-tl_x|y+1.
Thu Jan 16 20:26:29 1997 David Mosberger-Tang <davidm@azstarnet.com>
* backend/sane.c (sanei_constrain_value): Fix so it properly
handles strings that are longer than any of the strings in a
string list.
* frontend/scan.c (main): Subtract value of top-left-x/top-left-y
from width/height, respectively after all options have been
read in.
(main): Print help message _after_ options have been processed.
(fetch_options): New function.
(set_option): Call fetch_options() if SANE_INFO_RELOAD_OPTIONS is
set.
(main): Call fetch_options() instead of open-coding same.
* doc/sane.tex (subsection{Device Descriptor Type}): Add index
entry for device-name.
Wed Jan 15 19:55:03 1997 David Mosberger-Tang <davidm@azstarnet.com>
* backend/metadl.c (sane_init): Call DBG_INIT() and declare
debug level variable with DBG_DECL. Added various debug
statements.
* backend/pnm.c (sane_init): Ditto.
* backend/mustek.c (sane_init): Ditto.
* frontend/scan.c (parse_scalar): Default to mm again (instead of
cm). Using `mm' as the default is counter-intuitive since the
help info is printed with `mm' as the unit.
* frontend/xscan.c (main): Pass local_only==SANE_FALSE as second
argument to sane_get_devices().
Sun Jan 12 13:12:45 1997 David Mosberger-Tang <davidm@azstarnet.com>
* backend/sane.c (sanei_constrain_value): For string-lists, ignore
case and allow prefixes as long as they remain unique.
* frontend/scan.c (print_option): Print "auto" as a legal option
value if the option has capability SANE_CAP_AUTOMATIC set.
(process_backend_option): If option has SANE_CAP_AUTOMATIC set,
let option value of "auto" turn on automatic mode.
Wed Jan 8 19:55:31 1997 David Mosberger-Tang <davidm@azstarnet.com>
* backend/Makefile.in (install): Modify install rule so that
$(libdir) gets added to /etc/ld.so.conf if it isn't there
already.
(COMPILE): Use $(SHCFLAGS) instead of $(CFLAGS).
(LINK): Remove (unused).
Wed Dec 25 20:21:39 1996 David Mosberger-Tang <davidm@azstarnet.com>
* backend/mustek.README: Add section "SCSI Adapter Tips".
Fri Dec 13 20:02:03 1996 David Mosberger-Tang <davidm@azstarnet.com>
* backend/mustek.c (line_distance): Rename
LINE_DISTANCE_WORKAROUND to NEED_MUSTEK_LINE_DISTANCE_WORKAROUND.
Include <config.h>.
Thu Dec 12 20:19:26 1996 David Mosberger-Tang <davidm@azstarnet.com>
* backend/mustek.h (next): New member. Forms linked list of open
handles. * backend/mustek.c (first_handle): New variable. Root
of list of open handles.
(sane_open): Insert handle into list of open handles.
(sane_close): Remove handle from list of open handles.
Wed Dec 4 18:37:45 1996 David Mosberger-Tang <davidm@azstarnet.com>
* backend/mustek.c (attach): Added back MFS-12000SP, MFS-08000SP,
and MFS-06000SP. At least the first one really does exist. I
don't know how the differ from the other scanners, but it looks as
if line-distance correction might be different.
Tue Dec 3 21:22:54 1996 David Mosberger-Tang <davidm@azstarnet.com>
* backend/sane.c (sane_strstatus): Remove trailing dot from error
message.
Mon Dec 2 19:12:53 1996 David Mosberger-Tang <davidm@azstarnet.com>
* backend/mustek.c (max_string_size): New function to determine
maximum size of a string constraint list.
(init_options): Use max_string_size () to initialize size of
string-valued options.
Sun Dec 1 15:44:53 1996 David Mosberger-Tang <davidm@azstarnet.com>
* Version 0.1 released.
* backend/mustek.c (attach): Fix mispelled/bad model names:
MFS-12000SP -> MSF-12000SP
MFS-08000SP -> MSF-08000SP
MFS-06000SP -> MSF-06000SP
MFS-08000CZ -> <removed>
MFS-06000CZ -> <removed>
Tue Nov 26 19:11:18 1996 David Mosberger-Tang <davidm@azstarnet.com>
* frontend/scan.c (print_option): Separate option name from option
values by blank, not equal so the syntax is correct even for short
options.
(parse_scalar): Added missing newline to error message.
Sat Nov 16 17:26:19 1996 David Mosberger-Tang <davidm@azstarnet.com>
* frontend/scan.c (main): Created (by Andy).
* backend/pnm.c: Adapted from Andy's pnm.c (just minor updates).
* backend/mustek.c: Created.
* backend/metadl.c: Ditto.