sane-project-backends/doc/sane-teco1.man

198 wiersze
5.1 KiB
Groff
Czysty Zwykły widok Historia

.TH sane\-teco1 5 "14 Jul 2008" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy"
.IX sane\-teco1
2002-04-08 23:44:16 +00:00
.SH NAME
sane\-teco1 \- SANE backend for TECO / RELISYS scanners
2002-04-08 23:44:16 +00:00
.SH DESCRIPTION
The
.B sane\-teco1
2002-04-08 23:44:16 +00:00
library implements a SANE (Scanner Access Now Easy) backend that
provides access to some TECO SCSI flatbed scanners. This backend
should be considered
.B beta-quality
software! TECO scanners are sold under
various brands like RELISYS, PIOTECH, TRUST. This backend may or
2002-04-08 23:44:16 +00:00
may not support yours.
.PP
The scanners that should work with this backend are:
.PP
.RS
2005-04-12 06:01:14 +00:00
.ft CR
.nf
2002-08-31 02:54:15 +00:00
Vendor Model TECO model status
2002-04-08 23:44:16 +00:00
---------------------- -------------- -----------
Relisys AVEC 2400 VM3520 tested
Relisys AVEC 2412 VM3520+ tested
2002-04-08 23:44:16 +00:00
Relisys AVEC 4800 VM4530 untested
Relisys AVEC 4816 VM4530+ untested
Relisys RELI 2400 VM3530 untested
2002-07-07 19:26:26 +00:00
Relisys RELI 2412 VM3530+ tested
2002-04-08 23:44:16 +00:00
Relisys RELI 2412 VM3530+ untested
Relisys RELI 4816 VM4540 tested
Relisys RELI 4830 VM4542 tested
2002-04-08 23:44:16 +00:00
Relisys RELI 9600 VM6530 untested
Relisys RELI 9612 VM6530* untested
Relisys RELI 9624 VM6530+ untested
Relisys RELI 9630 VM6540 untested
2002-07-07 19:26:26 +00:00
Relisys RELI DS15 VM3440 untested
Relisys RELI DS6 VM3420 untested
2002-08-31 02:54:15 +00:00
Dextra DF-600P VM3510 tested
Dextra DF-4830T VM4542 untested
Dextra DF-1200T+ VM3530+ untested
Dextra DF-9624 VM6530+ untested
2005-04-12 06:01:14 +00:00
.fi
.ft R
2002-04-08 23:44:16 +00:00
.RE
Note that the untested scanner will not be directly supported. You
should contact the author for that.
2002-07-07 19:26:26 +00:00
The TECO VM number can usually be found at the back of the scanner. It
is also part of the FCC ID. "sane\-find\-scanner \-v" will also show the
2002-07-07 19:26:26 +00:00
scsi inquiry, and if it is a TECO scanner, the name will be there too.
2002-04-08 23:44:16 +00:00
The options the backend supports can either be selected through
command line options to programs like scanimage or through GUI
elements in xscanimage or xsane.
.br
If you have any success with a scanner not listed here, or if you have
any strange behavior, please report to the backend maintainer or to
the SANE mailing list.
Valid command line options and their syntax can be listed by using
.RS
scanimage \-\-help \-d teco1
2002-04-08 23:44:16 +00:00
.RE
.TP
.B Scan Mode
.TP
.B \-\-mode
2002-04-08 23:44:16 +00:00
selects the basic mode of operation of the scanner valid choices are
.I Black & White
,
.I Grayscale
and
.I Color
The Black & White mode is black and white only (1 bit). Grayscale
will produce 256 levels of gray (8 bits). Color will produce a 24 bits
color image.
.TP
.B \-\-resolution
2002-04-08 23:44:16 +00:00
selects the resolution for a scan. The scanner can do all resolutions
between 1 and 600, in increments of 1.
.TP
.B Geometry options
.TP
.B \-l \-t \-x \-y
control the scan area: \-l sets the top left x coordinate, \-t the top
left y coordinate, \-x selects the width and \-y the height of the scan
2002-04-08 23:44:16 +00:00
area. All parameters are specified in millimeters by default.
.TP
.B Enhancement options
.TP
.B \-\-custom\-gamma
2002-04-08 23:44:16 +00:00
(color mode only) allows the user to specify a gamma table (see the
next 3 parameters).
.TP
.B \-\-red\-gamma\-table
2002-04-08 23:44:16 +00:00
(color mode only) can be used to download a user defined
gamma table for the red channel. The table must be 256 bytes long.
.TP
.B \-\-green\-gamma\-table
2002-04-08 23:44:16 +00:00
(color mode only) can be used to download a user defined
gamma table for the green channel. The table must be 256 bytes long.
.TP
.B \-\-blue\-gamma\-table
2002-04-08 23:44:16 +00:00
(color mode only) can be used to download a user defined gamma table
for the blue channel. The table must be 256 bytes long.
.TP
.B \-\-dither
2002-04-08 23:44:16 +00:00
(Black & White only) select the dither mask to use. Possible values are
.I Line art
,
.I 2x2
,
.I 3x3
,
.I 4x4 bayer
,
.I 4x4 smooth
,
.I 8x8 bayer
,
.I 8x8 smooth
,
.I 8x8 horizontal
and
.I 8x8 vertical
.TP
.B \-\-preview
2002-04-08 23:44:16 +00:00
requests a preview scan. The resolution used for that scan is 22 dpi
and the scan area is the maximum allowed. The scan mode is user
selected. The default is "no".
.SH CONFIGURATION FILE
The configuration file @CONFIGDIR@/teco1.conf supports only one information: the device name to use (eg /dev/scanner).
.SH FILES
.TP
.I @LIBDIR@/libsane\-teco1.a
2002-04-08 23:44:16 +00:00
The static library implementing this backend.
.TP
.I @LIBDIR@/libsane\-teco1.so
2002-04-08 23:44:16 +00:00
The shared library implementing this backend (present on systems that
support dynamic loading).
.SH ENVIRONMENT
.TP
.B SANE_DEBUG_TECO1
If the library was compiled with debug support enabled, this
environment variable controls the debug level for this backend. E.g.,
a value of 128 requests all debug output to be printed. Smaller levels
reduce verbosity.
.SH LIMITATIONS
The windows TWAIN driver has many more options than this SANE
backend. However they are only software adjustments. This backend only
implements what the scanner can support.
.SH BUGS
None known.
.SH "SEE ALSO"
sane\-scsi(5), scanimage(1), xscanimage(1), xsane(1), sane(7)
2002-04-08 23:44:16 +00:00
.SH AUTHOR
2005-04-12 06:01:14 +00:00
.TP
2002-04-08 23:44:16 +00:00
The package is actively maintained by Frank Zago.
2005-04-12 06:01:14 +00:00
.I http://www.zago.net/sane/#teco
2002-07-07 19:26:26 +00:00
.SH CREDITS
Thanks to Gerard Delafond for the VM4542 support.
2002-08-31 02:54:15 +00:00
Thanks to Jean-Yves Simon for the VM3510 support.