mirror
/
sane-project-backends
kopia lustrzana https://gitlab.com/sane-project/backends
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
sane-project-backends/backend/epjitsu-cmd.h

460 wiersze
26 KiB
C
Czysty Zwykły widok Historia

2008-09-25 m. allan noah <kitno455 a t gmail d o t com> * backend/epjitsu.[ch], backend/epjitsu-cmd.h: backend v 13, 14 and 15: - add working page-height control - add working brightness, contrast and threshold controls - add disabled threshold curve and geometry controls - move initialization code to sane_get_devices, for hotplugging - support S300 on USB power - support S300 225x200 and 600x600 scans - support for automatic paper length detection (parm.lines = -1) - expose hardware buttons/sensors as options for S300 * doc/descriptions/epjitsu.desc: change S300 status to good
2008-09-25 03:15:49 +00:00
static void
putnbyte (unsigned char *pnt, unsigned int value, unsigned int nbytes)
{
int i;
for (i = nbytes - 1; i >= 0; i--) {
pnt[i] = value & 0xff;
value = value >> 8;
}
}
#define SET_WINDOW_LEN 72
#define set_SW_byte7(out, val) out[7] = val
#define set_SW_xres(out, val) putnbyte(out + 0x0a, val, 2)
#define set_SW_yres(out, val) putnbyte(out + 0x0c, val, 2)
#define set_SW_xpix(out, val) putnbyte(out + 0x16, val, 4)
#define set_SW_ypix(out, val) putnbyte(out + 0x1a, val, 4)
#define set_SW_compo(out, val) out[0x21] = val /*color=5,gray=2*/
#define set_SW_bpp(out, val) out[0x22] = val
#define set_SW_byte31(out, val) out[0x31] = val
#define set_SW_byte32(out, val) out[0x32] = val
#define set_SW_byte33(out, val) out[0x33] = val
#define set_SW_lpb(out, val) out[0x34] = val
#define set_SW_byte35(out, val) out[0x35] = val
#define set_SW_byte36(out, val) out[0x36] = val
#define set_SW_byte38(out, val) out[0x38] = val /*move motor?*/
#define set_SW_fres(out, val) putnbyte(out + 0x39, val, 2)
Adding v1.0.9 of the epjitsu backend: supports Epson-based Fujitsu scanners, currently the fi-60F flatbed and ScanSnap S300 duplex ADF machines
2007-12-18 02:02:51 +00:00
/*************** COARSE CALIBRATION DEFAULT PAYLOAD *************/
/* 1b c6 (send coarse cal) command payload - not resolution specific? */
/* first group of 3 is offset?, larger # == brighter */
/* second group of 3 is gain?, larger # == brighter */
static unsigned char coarseCalData_FI60F[] = {
0x01, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x26, 0x00, 0x26, 0x00, 0x26,
0x00, 0x00, 0x0b, 0x22, 0x00, 0x00, 0x0b, 0x22, 0x00, 0x00, 0x0b, 0x22
};
static unsigned char coarseCalData_S300[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x2d, 0x00, 0x2b, 0x00, 0x00, 0x00, 0x24, 0x00, 0x28, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
/*************** fi-60F 150dpi *************/
/* 1b d1 (set window) before coarse cal (read 1 line of 0x____ bytes) */
static unsigned char setWindowCoarseCal_FI60F_150[] = {
0
};
/* 1b d1 (set window) before fine cal (read 16 lines of 0x____ bytes) */
static unsigned char setWindowFineCal_FI60F_150[] = {
0
};
/* 1b d1 (set window) before gain/offset tables (write 1 line of 0x____ bytes) */
static unsigned char setWindowSendCal_FI60F_150[] = {
0
};
/* 1b c3 (gain?) command header */
static unsigned char sendCal1Header_FI60F_150[] = {
0
};
/* 1b c4 (offset?) command header */
static unsigned char sendCal2Header_FI60F_150[] = {
0
};
/* 1b d1 (set window) before scan */
static unsigned char setWindowScan_FI60F_150[] = {
0
};
/*************** fi-60F 300dpi *************/
/* 1b d1 (set window) before coarse cal (read 1 line of 0x1c20 bytes) */
static unsigned char setWindowCoarseCal_FI60F_300[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x01, 0x2c, 0x01, 0x2c, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x09, 0x60, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00,
0x00, 0x05, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
/* 1b d1 (set window) before fine cal (read 16 lines of 0x1c20 bytes) */
static unsigned char setWindowFineCal_FI60F_300[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, 0x01, 0x2c, 0x03, 0x20, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x09, 0x60, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00,
0x00, 0x05, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
Epjitsu backend v19, better calibration from Richard at fascinationsoftware dot com
2009-08-31 13:57:08 +00:00
0x00, 0x80, 0x80, 0x00, 0x10, 0x00, 0x08, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
Adding v1.0.9 of the epjitsu backend: supports Epson-based Fujitsu scanners, currently the fi-60F flatbed and ScanSnap S300 duplex ADF machines
2007-12-18 02:02:51 +00:00
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
/* 1b d1 (set window) before gain/offset tables (write 1 line of 0x3840 bytes) */
static unsigned char setWindowSendCal_FI60F_300[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, 0x01, 0x2c, 0x03, 0x20, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x09, 0x60, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00,
0x00, 0x05, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x01, 0x10, 0x00, 0x08, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
/* 1b c3 (gain?) command header */
static unsigned char sendCal1Header_FI60F_300[] = { /* plus 0x3840 data bytes */
0x8c, 0x0f, 0x8c, 0x0f, 0x8c, 0x0f, 0x8c, 0x0f, 0x8c, 0x0f, 0x8c, 0x0f, 0x00, 0x04
};
/* 1b c4 (offset?) command header */
static unsigned char sendCal2Header_FI60F_300[] = {
0x39, 0x3f, 0x39, 0x3f, 0x39, 0x3f, 0x07
};
/* 1b d1 (set window) before scan */
static unsigned char setWindowScan_FI60F_300[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, 0x01, 0x2c, 0x01, 0x2c, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x09, 0x60, 0x00, 0x00, 0x06, 0xd5, 0x00, 0x00,
0x00, 0x05, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x80, 0x80, 0x01, 0x48, 0x00, 0x08, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
/*************** fi-60F 600dpi *************/
/* 1b d1 (set window) before coarse cal (read 1 line of 0x2160 bytes) */
static unsigned char setWindowCoarseCal_FI60F_600[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x02, 0x58, 0x02, 0x58, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0b, 0x20, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00,
0x00, 0x05, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
/* 1b d1 (set window) before fine cal (read 16 lines of 0x2160 bytes) */
static unsigned char setWindowFineCal_FI60F_600[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, 0x02, 0x58, 0x03, 0x20, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0b, 0x20, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00,
0x00, 0x05, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
Epjitsu backend v19, better calibration from Richard at fascinationsoftware dot com
2009-08-31 13:57:08 +00:00
0x00, 0x80, 0x80, 0x00, 0x10, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
Adding v1.0.9 of the epjitsu backend: supports Epson-based Fujitsu scanners, currently the fi-60F flatbed and ScanSnap S300 duplex ADF machines
2007-12-18 02:02:51 +00:00
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
/* 1b d1 (set window) before gain/offset tables (write 1 line of 0x42c0 bytes) */
static unsigned char setWindowSendCal_FI60F_600[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, 0x02, 0x58, 0x02, 0x58, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0b, 0x20, 0x00, 0x00, 0x0d, 0xaa, 0x00, 0x00,
0x00, 0x05, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x80, 0x80, 0x01, 0x3d, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
/* 1b c3 (gain?) command header */
static unsigned char sendCal1Header_FI60F_600[] = {
0x4f, 0x10, 0x4f, 0x10, 0x4f, 0x10, 0x4f, 0x10, 0x4f, 0x10, 0x4f, 0x10, 0x00, 0x04
};
/* 1b c4 (offset?) command header */
static unsigned char sendCal2Header_FI60F_600[] = {
0x2b, 0x40, 0x2b, 0x40, 0x2b, 0x40, 0x07
};
/* 1b d1 (set window) before scan */
static unsigned char setWindowScan_FI60F_600[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, 0x02, 0x58, 0x02, 0x58, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0b, 0x20, 0x00, 0x00, 0x0d, 0xaa, 0x00, 0x00,
0x00, 0x05, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x80, 0x80, 0x01, 0x3d, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
/*************** S300 150dpi *************/
/* 1b d1 (set window) before coarse cal (read 1 line of 0x63c0 bytes) */
static unsigned char setWindowCoarseCal_S300_150[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x01, 0x2c, 0x01, 0x2c, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0b, 0x90, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00,
0x00, 0x05, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x96, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
/* 1b d1 (set window) before fine cal (read 16 lines of 0x63c0 bytes) */
static unsigned char setWindowFineCal_S300_150[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x01, 0x2c, 0x03, 0x20, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0b, 0x90, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00,
0x00, 0x05, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
Epjitsu backend v19, better calibration from Richard at fascinationsoftware dot com
2009-08-31 13:57:08 +00:00
0x00, 0x80, 0x80, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x96, 0x00, 0x00, 0x00, 0x00, 0x00,
Adding v1.0.9 of the epjitsu backend: supports Epson-based Fujitsu scanners, currently the fi-60F flatbed and ScanSnap S300 duplex ADF machines
2007-12-18 02:02:51 +00:00
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
/* 1b d1 (set window) before gain/offset tables (write 1 line of 0xc780 bytes) */
static unsigned char setWindowSendCal_S300_150[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x01, 0x2c, 0x03, 0x20, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x21, 0x40, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00,
0x00, 0x05, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x96, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
/* 1b c3 (gain?) command header */
static unsigned char sendCal1Header_S300_150[] = { /* plus 0xc780 data bytes */
0xe2, 0x0a, 0xe2, 0x0a, 0xe2, 0x0a, 0xe2, 0x0a, 0xe2, 0x0a, 0xe2, 0x0a, 0x00, 0x04
/*0xa5, 0x0b, 0xa5, 0x0b, 0xa5, 0x0b, 0xa5, 0x0b, 0xa5, 0x0b, 0xa5, 0x0b, 0x00, 0x05*/
};
/* 1b c4 (offset?) command header */
static unsigned char sendCal2Header_S300_150[] = { /* plus 0xc780 data bytes */
0x77, 0x26, 0x77, 0x26, 0x77, 0x26, 0x07
/*0xd0, 0x34, 0xd0, 0x34, 0xd0, 0x34, 0x08*/
};
/* 1b d1 (set window) before scan */
static unsigned char setWindowScan_S300_150[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, 0x96, 0x00, 0x96, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0xc8, 0x00, 0x00, 0x06, 0xe2, 0x00, 0x00,
0x00, 0x05, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x80, 0x80, 0x01, 0x29, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
2008-09-25 m. allan noah <kitno455 a t gmail d o t com> * backend/epjitsu.[ch], backend/epjitsu-cmd.h: backend v 13, 14 and 15: - add working page-height control - add working brightness, contrast and threshold controls - add disabled threshold curve and geometry controls - move initialization code to sane_get_devices, for hotplugging - support S300 on USB power - support S300 225x200 and 600x600 scans - support for automatic paper length detection (parm.lines = -1) - expose hardware buttons/sensors as options for S300 * doc/descriptions/epjitsu.desc: change S300 status to good
2008-09-25 03:15:49 +00:00
/*************** S300 225dpi *************/
/* 1b d1 (set window) before coarse cal (read 1 line of 0x63c0 bytes) */
static unsigned char setWindowCoarseCal_S300_225[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x01, 0x2c, 0x01, 0x2c, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0a, 0xf0, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00,
0x00, 0x05, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe1, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
/* 1b d1 (set window) before fine cal (read 16 lines of 0x63c0 bytes) */
static unsigned char setWindowFineCal_S300_225[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x01, 0x2c, 0x03, 0x20, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0a, 0xf0, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00,
0x00, 0x05, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
Epjitsu backend v19, better calibration from Richard at fascinationsoftware dot com
2009-08-31 13:57:08 +00:00
0x00, 0x80, 0x80, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe1, 0x00, 0x00, 0x00, 0x00, 0x00,
2008-09-25 m. allan noah <kitno455 a t gmail d o t com> * backend/epjitsu.[ch], backend/epjitsu-cmd.h: backend v 13, 14 and 15: - add working page-height control - add working brightness, contrast and threshold controls - add disabled threshold curve and geometry controls - move initialization code to sane_get_devices, for hotplugging - support S300 on USB power - support S300 225x200 and 600x600 scans - support for automatic paper length detection (parm.lines = -1) - expose hardware buttons/sensors as options for S300 * doc/descriptions/epjitsu.desc: change S300 status to good
2008-09-25 03:15:49 +00:00
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
/* 1b d1 (set window) before gain/offset tables (write 1 line of 0xc780 bytes) */
static unsigned char setWindowSendCal_S300_225[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x01, 0x2c, 0x03, 0x20, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00,
0x00, 0x05, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe1, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
/* 1b c3 (gain?) command header */
static unsigned char sendCal1Header_S300_225[] = { /* plus 0xc780 data bytes */
0xe2, 0x0a, 0xe2, 0x0a, 0xe2, 0x0a, 0xe2, 0x0a, 0xe2, 0x0a, 0xe2, 0x0a, 0x00, 0x04
/*0xa5, 0x0b, 0xa5, 0x0b, 0xa5, 0x0b, 0xa5, 0x0b, 0xa5, 0x0b, 0xa5, 0x0b, 0x00, 0x05*/
};
/* 1b c4 (offset?) command header */
static unsigned char sendCal2Header_S300_225[] = { /* plus 0xc780 data bytes */
0x77, 0x26, 0x77, 0x26, 0x77, 0x26, 0x07
/*0xd0, 0x34, 0xd0, 0x34, 0xd0, 0x34, 0x08*/
};
/* 1b d1 (set window) before scan */
static unsigned char setWindowScan_S300_225[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, 0xe1, 0x00, 0xc8, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x34, 0x00, 0x00, 0x0c, 0x0c, 0x00, 0x00,
0x00, 0x05, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x80, 0x80, 0x01, 0x1c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
Adding v1.0.9 of the epjitsu backend: supports Epson-based Fujitsu scanners, currently the fi-60F flatbed and ScanSnap S300 duplex ADF machines
2007-12-18 02:02:51 +00:00
/*************** S300 300dpi *************/
/* 1b d1 (set window) before coarse cal (read 1 line of 0x6000 bytes) */
static unsigned char setWindowCoarseCal_S300_300[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x01, 0x2c, 0x01, 0x2c, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0a, 0xf0, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00,
0x00, 0x05, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x2c, 0x01, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
/* 1b d1 (set window) before fine cal (read 16 lines of 0x6000 bytes) */
static unsigned char setWindowFineCal_S300_300[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x01, 0x2c, 0x03, 0x20, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0a, 0xf0, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00,
0x00, 0x05, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
Epjitsu backend v19, better calibration from Richard at fascinationsoftware dot com
2009-08-31 13:57:08 +00:00
0x00, 0x80, 0x80, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x2c, 0x01, 0x00, 0x00, 0x00, 0x00,
Adding v1.0.9 of the epjitsu backend: supports Epson-based Fujitsu scanners, currently the fi-60F flatbed and ScanSnap S300 duplex ADF machines
2007-12-18 02:02:51 +00:00
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
/* 1b d1 (set window) before gain/offset tables (write 1 line of 0xc000 bytes) */
static unsigned char setWindowSendCal_S300_300[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x01, 0x2c, 0x03, 0x20, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00,
0x00, 0x05, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x2c, 0x01, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
/* 1b c3 (gain?) command header */
static unsigned char sendCal1Header_S300_300[] = { /* plus 0xc000 data bytes */
0xe2, 0x0a, 0xe2, 0x0a, 0xe2, 0x0a, 0xe2, 0x0a, 0xe2, 0x0a, 0xe2, 0x0a, 0x00, 0x04
/*0x30, 0x0c, 0x30, 0x0c, 0x30, 0x0c, 0x30, 0x0c, 0x30, 0x0c, 0x30, 0x0c, 0x00, 0x05*/
};
/* 1b c4 (offset?) command header */
static unsigned char sendCal2Header_S300_300[] = { /* plus 0xc000 data bytes */
0x77, 0x26, 0x77, 0x26, 0x77, 0x26, 0x07
/*0xb8, 0x34, 0xb8, 0x34, 0xb8, 0x34, 0x08*/
};
/* 1b d1 (set window) before scan */
static unsigned char setWindowScan_S300_300[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x01, 0x2c, 0x01, 0x2c, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0a, 0xf0, 0x00, 0x00, 0x0d, 0xc4, 0x00, 0x00,
0x00, 0x05, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x80, 0x80, 0x01, 0x15, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
2008-09-25 m. allan noah <kitno455 a t gmail d o t com> * backend/epjitsu.[ch], backend/epjitsu-cmd.h: backend v 13, 14 and 15: - add working page-height control - add working brightness, contrast and threshold controls - add disabled threshold curve and geometry controls - move initialization code to sane_get_devices, for hotplugging - support S300 on USB power - support S300 225x200 and 600x600 scans - support for automatic paper length detection (parm.lines = -1) - expose hardware buttons/sensors as options for S300 * doc/descriptions/epjitsu.desc: change S300 status to good
2008-09-25 03:15:49 +00:00
/*************** S300 600dpi USB and AC power *************/
Adding v1.0.9 of the epjitsu backend: supports Epson-based Fujitsu scanners, currently the fi-60F flatbed and ScanSnap S300 duplex ADF machines
2007-12-18 02:02:51 +00:00
/* 1b d1 (set window) before coarse cal (read 1 line of 0xbc40 bytes) */
static unsigned char setWindowCoarseCal_S300_600[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x02, 0x58, 0x02, 0x58, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x15, 0x40, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00,
0x00, 0x05, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x58, 0x02, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
/* 1b d1 (set window) before fine cal (read 16 lines of 0xbc40 bytes) */
static unsigned char setWindowFineCal_S300_600[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x02, 0x58, 0x03, 0x20, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x15, 0x40, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00,
0x00, 0x05, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
Epjitsu backend v19, better calibration from Richard at fascinationsoftware dot com
2009-08-31 13:57:08 +00:00
0x00, 0x80, 0x80, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x58, 0x02, 0x00, 0x00, 0x00, 0x00,
Adding v1.0.9 of the epjitsu backend: supports Epson-based Fujitsu scanners, currently the fi-60F flatbed and ScanSnap S300 duplex ADF machines
2007-12-18 02:02:51 +00:00
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
/* 1b d1 (set window) before gain/offset tables (write 1 line of 0x17880 bytes) */
static unsigned char setWindowSendCal_S300_600[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x02, 0x58, 0x03, 0x20, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3e, 0xc0, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00,
0x00, 0x05, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x58, 0x02, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
/* 1b c3 (gain?) command header */
static unsigned char sendCal1Header_S300_600[] = {
0x7f, 0x0b, 0x7f, 0x0b, 0x7f, 0x0b, 0x7f, 0x0b, 0x7f, 0x0b, 0x7f, 0x0b, 0x00, 0x04
};
/* 1b c4 (offset?) command header */
static unsigned char sendCal2Header_S300_600[] = {
0xc7, 0x23, 0xc7, 0x23, 0xc7, 0x23, 0x07
};
/* 1b d1 (set window) before scan */
static unsigned char setWindowScan_S300_600[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x02, 0x58, 0x02, 0x58, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x15, 0x40, 0x00, 0x00, 0x24, 0x21, 0x00, 0x00,
0x00, 0x05, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x80, 0x80, 0x01, 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
2008-09-25 m. allan noah <kitno455 a t gmail d o t com> * backend/epjitsu.[ch], backend/epjitsu-cmd.h: backend v 13, 14 and 15: - add working page-height control - add working brightness, contrast and threshold controls - add disabled threshold curve and geometry controls - move initialization code to sane_get_devices, for hotplugging - support S300 on USB power - support S300 225x200 and 600x600 scans - support for automatic paper length detection (parm.lines = -1) - expose hardware buttons/sensors as options for S300 * doc/descriptions/epjitsu.desc: change S300 status to good
2008-09-25 03:15:49 +00:00
/*S300 can also use a USB power cable, but it requires a different set of params?*/
/*************** S300 150dpi USB *************/
/* 1b d1 (set window) before coarse cal (read 1 line of 0x63c0 bytes) */
static unsigned char setWindowCoarseCal_S300_150_U[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x01, 0x2c, 0x01, 0x2c, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x17, 0x20, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00,
0x00, 0x05, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x96, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
/* 1b d1 (set window) before fine cal (read 16 lines of 0x63c0 bytes) */
static unsigned char setWindowFineCal_S300_150_U[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x01, 0x2c, 0x03, 0x20, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x17, 0x20, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00,
0x00, 0x05, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
Epjitsu backend v19, better calibration from Richard at fascinationsoftware dot com
2009-08-31 13:57:08 +00:00
0x00, 0x08, 0x80, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x96, 0x00, 0x00, 0x00, 0x00, 0x00,
2008-09-25 m. allan noah <kitno455 a t gmail d o t com> * backend/epjitsu.[ch], backend/epjitsu-cmd.h: backend v 13, 14 and 15: - add working page-height control - add working brightness, contrast and threshold controls - add disabled threshold curve and geometry controls - move initialization code to sane_get_devices, for hotplugging - support S300 on USB power - support S300 225x200 and 600x600 scans - support for automatic paper length detection (parm.lines = -1) - expose hardware buttons/sensors as options for S300 * doc/descriptions/epjitsu.desc: change S300 status to good
2008-09-25 03:15:49 +00:00
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
/* 1b d1 (set window) before gain/offset tables (write 1 line of 0xc780 bytes) */
static unsigned char setWindowSendCal_S300_150_U[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x01, 0x2c, 0x03, 0x20, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x60, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00,
0x00, 0x05, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x96, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
/* 1b c3 (gain?) command header */
static unsigned char sendCal1Header_S300_150_U[] = { /* plus 0xc780 data bytes */
0xe2, 0x0a, 0xe2, 0x0a, 0xe2, 0x0a, 0xe2, 0x0a, 0xe2, 0x0a, 0xe2, 0x0a, 0x00, 0x04
/*0xa5, 0x0b, 0xa5, 0x0b, 0xa5, 0x0b, 0xa5, 0x0b, 0xa5, 0x0b, 0xa5, 0x0b, 0x00, 0x05*/
};
/* 1b c4 (offset?) command header */
static unsigned char sendCal2Header_S300_150_U[] = { /* plus 0xc780 data bytes */
0x77, 0x26, 0x77, 0x26, 0x77, 0x26, 0x07
/*0xd0, 0x34, 0xd0, 0x34, 0xd0, 0x34, 0x08*/
};
/* 1b d1 (set window) before scan */
static unsigned char setWindowScan_S300_150_U[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, 0x96, 0x00, 0x96, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0b, 0x90, 0x00, 0x00, 0x09, 0x0d, 0x00, 0x00,
0x00, 0x05, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x80, 0x80, 0x01, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
/*************** S300 225dpi USB *************/
/* 1b d1 (set window) before coarse cal (read 1 line of 0x63c0 bytes) */
static unsigned char setWindowCoarseCal_S300_225_U[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x01, 0x2c, 0x01, 0x2c, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x16, 0x80, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00,
0x00, 0x05, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe1, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
/* 1b d1 (set window) before fine cal (read 16 lines of 0x63c0 bytes) */
static unsigned char setWindowFineCal_S300_225_U[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x01, 0x2c, 0x03, 0x20, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x16, 0x80, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00,
0x00, 0x05, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
Epjitsu backend v19, better calibration from Richard at fascinationsoftware dot com
2009-08-31 13:57:08 +00:00
0x00, 0x80, 0x80, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe1, 0x00, 0x00, 0x00, 0x00, 0x00,
2008-09-25 m. allan noah <kitno455 a t gmail d o t com> * backend/epjitsu.[ch], backend/epjitsu-cmd.h: backend v 13, 14 and 15: - add working page-height control - add working brightness, contrast and threshold controls - add disabled threshold curve and geometry controls - move initialization code to sane_get_devices, for hotplugging - support S300 on USB power - support S300 225x200 and 600x600 scans - support for automatic paper length detection (parm.lines = -1) - expose hardware buttons/sensors as options for S300 * doc/descriptions/epjitsu.desc: change S300 status to good
2008-09-25 03:15:49 +00:00
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
/* 1b d1 (set window) before gain/offset tables (write 1 line of 0xc780 bytes) */
static unsigned char setWindowSendCal_S300_225_U[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x01, 0x2c, 0x03, 0x20, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x37, 0x20, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00,
0x00, 0x05, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe1, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
/* 1b c3 (gain?) command header */
static unsigned char sendCal1Header_S300_225_U[] = { /* plus 0xc780 data bytes */
0xe2, 0x0a, 0xe2, 0x0a, 0xe2, 0x0a, 0xe2, 0x0a, 0xe2, 0x0a, 0xe2, 0x0a, 0x00, 0x04
/*0xa5, 0x0b, 0xa5, 0x0b, 0xa5, 0x0b, 0xa5, 0x0b, 0xa5, 0x0b, 0xa5, 0x0b, 0x00, 0x05*/
};
/* 1b c4 (offset?) command header */
static unsigned char sendCal2Header_S300_225_U[] = { /* plus 0xc780 data bytes */
0x77, 0x26, 0x77, 0x26, 0x77, 0x26, 0x07
/*0xd0, 0x34, 0xd0, 0x34, 0xd0, 0x34, 0x08*/
};
/* 1b d1 (set window) before scan */
static unsigned char setWindowScan_S300_225_U[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, 0xe1, 0x00, 0xc8, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0xe0, 0x00, 0x00, 0x0c, 0x0c, 0x00, 0x00,
0x00, 0x05, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x80, 0x80, 0x01, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
/*************** S300 300dpi USB *************/
/* 1b d1 (set window) before coarse cal (read 1 line of 0x63c0 bytes) */
static unsigned char setWindowCoarseCal_S300_300_U[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x01, 0x2c, 0x01, 0x2c, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x19, 0xf0, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00,
0x00, 0x05, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x2c, 0x01, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
/* 1b d1 (set window) before fine cal (read 16 lines of 0x63c0 bytes) */
static unsigned char setWindowFineCal_S300_300_U[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x01, 0x2c, 0x03, 0x20, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x19, 0xf0, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00,
0x00, 0x05, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
Epjitsu backend v19, better calibration from Richard at fascinationsoftware dot com
2009-08-31 13:57:08 +00:00
0x00, 0x80, 0x80, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x2c, 0x01, 0x00, 0x00, 0x00, 0x00,
2008-09-25 m. allan noah <kitno455 a t gmail d o t com> * backend/epjitsu.[ch], backend/epjitsu-cmd.h: backend v 13, 14 and 15: - add working page-height control - add working brightness, contrast and threshold controls - add disabled threshold curve and geometry controls - move initialization code to sane_get_devices, for hotplugging - support S300 on USB power - support S300 225x200 and 600x600 scans - support for automatic paper length detection (parm.lines = -1) - expose hardware buttons/sensors as options for S300 * doc/descriptions/epjitsu.desc: change S300 status to good
2008-09-25 03:15:49 +00:00
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
/* 1b d1 (set window) before gain/offset tables (write 1 line of 0xc780 bytes) */
static unsigned char setWindowSendCal_S300_300_U[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x01, 0x2c, 0x03, 0x20, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3e, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00,
0x00, 0x05, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x2c, 0x01, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
/* 1b c3 (gain?) command header */
static unsigned char sendCal1Header_S300_300_U[] = { /* plus 0xc780 data bytes */
0xe2, 0x0a, 0xe2, 0x0a, 0xe2, 0x0a, 0xe2, 0x0a, 0xe2, 0x0a, 0xe2, 0x0a, 0x00, 0x04
/*0xa5, 0x0b, 0xa5, 0x0b, 0xa5, 0x0b, 0xa5, 0x0b, 0xa5, 0x0b, 0xa5, 0x0b, 0x00, 0x05*/
};
/* 1b c4 (offset?) command header */
static unsigned char sendCal2Header_S300_300_U[] = { /* plus 0xc780 data bytes */
0x77, 0x26, 0x77, 0x26, 0x77, 0x26, 0x07
/*0xd0, 0x34, 0xd0, 0x34, 0xd0, 0x34, 0x08*/
};
/* 1b d1 (set window) before scan */
static unsigned char setWindowScan_S300_300_U[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x01, 0x2c, 0x01, 0x2c, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x19, 0xf0, 0x00, 0x00, 0x12, 0x11, 0x00, 0x00,
0x00, 0x05, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x80, 0x80, 0x01, 0x0b, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
/*************** S300 600dpi USB is same as AC power *************/