sane-project-backends/backend/dc210.conf.in

30 wiersze
984 B
Plaintext
Czysty Zwykły widok Historia

1999-08-09 18:06:01 +00:00
# Serial port where the camera is connected
## Linux
port=/dev/ttyS0
## IRIX
#port=/dev/ttyd1
## Solaris
#port=/dev/term/a
## HP-UX
#port=/dev/tty0p0
## Digital UNIX
#port=/dev/tty01
# Max baud rate for download. Camera always starts at 9600 baud, then
# switches to the higher rate
2003-01-07 01:15:16 +00:00
## This works for Linux. Also works for IRIX (6.3 or higher), providing that
## the host is an O2, OCTANE, Origin2000/200, Onyx2, Origin3000/300, Onyx3 or
## a newer SGI hardware [see serial(7)].
#baud=115200
1999-08-09 18:06:01 +00:00
## This works for most UNIX's
2003-01-07 01:15:16 +00:00
baud=38400
1999-08-09 18:06:01 +00:00
# Prints some extra information during the init phase. This can be
# handy, but note that printing anything to stderr breaks the saned
# network scanning.
#dumpinquiry
# How many usec (1,000,000ths of a) between writing the command and reading the
# result. 125000 seems to be the lowest I could go reliably.
cmdrespause=125000
# How many usec (1,000,000ths of a) between sending the "back to default" break
# sending commands.
breakpause=1000000;