sane-project-backends/doc/descriptions/genesys.desc

:backend "genesys"
:version "1.0-62"
:manpage "sane-genesys"
:comment "Only the USB scanners mentioned below are currently supported."
:url "http://www.meier-geinitz.de/sane/genesys-backend/"
:devicetype :scanner

; -----------------------------------------------------------------------------

:mfg "Plustek"
:url "http://www.plustek.de/"
:url "http://www.plustek.com/"

:model "OpticBook 3600"
:interface "USB"
:usbid "0x07b3" "0x0900"
:status :basic
:comment "Has a Primax USB ID"

; -----------------------------------------------------------------------------

:mfg "Medion/Lifetec/Tevion/Cytron"
:url "http://www.medion.com/"
:url "http://www.medion.de/"

:model "MD5345"
:interface "USB"
:usbid "0x0461" "0x0377"
:status :good
:comment "Has a Primax USB ID"

:model "MD6228"
:interface "USB"
:usbid "0x0461" "0x0377"
:status :good
:comment "Has a Primax USB ID. Same as MD5345"

:model "MD6471"
:interface "USB"
:usbid "0x0461" "0x0377"
:status :complete
:comment "Has a Primax USB ID. Same as MD5345"

; -----------------------------------------------------------------------------

:mfg "Hewlett-Packard"
:url "http://www.hp.com/"

:model "ScanJet 2300C"
:interface "USB"
:usbid "0x03f0" "0x0901"
:status :complete
:comment "600x1200 dpi max"

:model "ScanJet 2400C"
:interface "USB"
:usbid "0x03f0" "0x0a01"
:status :complete
:comment "1200x1200 dpi max"

:model "ScanJet G2410"
:interface "USB"
:usbid "0x03f0" "0x0a01"
:status :untested
:comment "clone of the HP 2400C"

:model "ScanJet 3670C"
:interface "USB"
:usbid "0x03f0" "0x1405"
:status :complete
:comment "1200x1200 dpi max, complete transparency adaptor support"

:model "ScanJet 3690C"
:interface "USB"
:usbid "0x03f0" "0x1405"
:status :complete
:comment "1200x1200 dpi max, same as HP 3670C"

:model "ScanJet 4850C"
:interface "USB"
:usbid "0x03f0" "0x1b05"
:status :untested
:comment "resolution from 100 to 2400 supported, UTA not supported yet"

:model "ScanJet G4010"
:interface "USB"
:usbid "0x03f0" "0x4505"
:status :good
:comment "resolution from 100 to 2400 supported, UTA not supported yet"

:model "ScanJet G4050"
:interface "USB"
:usbid "0x03f0" "0x4605"
:status :basic
:comment "resolution from 100 to 2400 supported, UTA not supported yet"

:model "ScanJet N6310"
:interface "USB"
:usbid "0x03f0" "0x4705"
:status :untested
:comment "Not completed yet to capture the images"

; -----------------------------------------------------------------------------

:mfg "Canon"
:url "http://www.canon.com/"

:model "CanoScan LiDE 35"
:interface "USB"
:usbid "0x04a9" "0x2213"
:status :good
:comment "Same ids as LiDE 50."

:model "CanoScan LiDE 40"
:interface "USB"
:usbid "0x04a9" "0x2213"
:status :good
:comment "Same ids as LiDE 50."

:model "CanoScan LiDE 50"
:interface "USB"
:usbid "0x04a9" "0x2213"
:status :good

:model "CanoScan LiDE 60"
:interface "USB"
:usbid "0x04a9" "0x221c"
:status :good

:model "CanoScan LiDE 100"
:interface "USB"
:usbid "0x04a9" "0x1904"
:status :complete
:comment "GL847 based, resolution from 75 to 2400 dpi"

:model "CanoScan LiDE 110"
:interface "USB"
:usbid "0x04a9" "0x1909"
:status :complete
:comment "GL124 based, resolution from 75 to 2400 dpi"

:model "CanoScan LiDE 200"
:interface "USB"
:usbid "0x04a9" "0x1905"
:status :complete
:comment "GL847 based, resolution from 75 to 4800 dpi"

:model "CanoScan LiDE 210"
:interface "USB"
:usbid "0x04a9" "0x190a"
:status :complete
:comment "GL124 based, resolution from 75 to 2400 dpi"

:model "CanoScan 5600F"
:interface "USB"
:usbid "0x04a9" "0x1906"
:status :unsupported
:comment "GL847 based, to be added to the genesys backend"

:model "CanoScan 700F"
:interface "USB"
:usbid "0x04a9" "0x1907"
:status :good
:comment "GL847 based, resolution from 75 to 4800 dpi"

; -----------------------------------------------------------------------------

:mfg "Visioneer"
:url "http://www.visioneer.com/"

:model "Strobe XP 100,r3"
:interface "USB"
:usbid  "0x04a7" "0x049b"
:status :good
:comment "All resolution and mode supported, calibration is available"

:model "Strobe XP 200"
:interface "USB"
:usbid  "0x04a7" "0x0426"
:status :good
:comment "All resolution and mode supported, calibration is available"

:model "Strobe XP 300"
:interface "USB"
:usbid  "0x04a7" "0x0474"
:status :good
:comment "All resolution and mode supported, calibration is available, front- and backside side-by-side, with backside mirrored horizontally."

:model "Roadwarrior"
:interface "USB"
:usbid  "0x04a7" "0x0494"
:status :basic
:comment "All resolution and mode supported, calibration is available"

:model "Visioneer OneTouch 7100"
:interface "USB"
:usbid "0x04a7" "0x0229"
:status :complete
:comment "Same as MD5345"

; -----------------------------------------------------------------------------

:mfg "Pentax"
:url "http://www.pentaxtech.com/"
:url "http://mobilesolutions.brother-usa.com/"

:model "DSmobile 600"
:interface "USB"
:usbid  "0x0a17" "0x3210"
:status :good
:comment "All resolution and mode supported, calibration is available"

:model "DSmobile 600"
:interface "USB"
:usbid  "0x04f9" "0x2038"
:status :good
:comment "All resolution and mode supported, calibration is available"

; -----------------------------------------------------------------------------

:mfg "DCT"
:url "http://www.docucap.com/"
:comment "Successor of Syscan in the USA"

:model "DocketPort 487"
:interface "USB"
:usbid  "0x1dcc" "0x4810"
:status :basic
:comment "All resolution and mode supported, calibration is available, front- and backside side-by-side, with backside mirrored horizontally."

; -----------------------------------------------------------------------------

:mfg "Syscan"

:model "DocketPort 485"
:interface "USB"
:usbid  "0x0a82" "0x4810"
:status :basic
:comment "All resolution and mode supported, front- and backside side-by-side, with backside mirrored horizontally."

:model "DocketPort 465"
:interface "USB"
:usbid  "0x0a82" "0x4802"
:status :untested
:comment "All resolution and mode should be supported, but uncorrected scans"

:model "DocketPort 665"
:interface "USB"
:usbid  "0x0a82" "0x4803"
:status :basic
:comment "All resolution and mode supported, calibration is available"

:model "DocketPort 685/ Ambir DS685"
:interface "USB"
:usbid  "0x0a82" "0x480c"
:status :good
:comment "All resolution and mode supported, calibration is available, front- and backside side-by-side, with backside mirrored horizontally."

:mfg "Xerox"
:url "http://www.xerox.com/"

:model "Travel Scanner 100"
:interface "USB"
:usbid  "0x04a7" "0x04ac"
:status :good
:comment "All resolution and mode supported, calibration is available"

:model "2400 Onetouch"
:interface "USB"
:usbid "0x0461" "0x038b"
:status :complete
:comment "GL646 based, resolution from 75 to 2400 dpi"


; -----------------------------------------------------------------------------

:mfg "Panasonic"

:model "KV-SS080"
:interface "USB"
:usbid  "0x04da" "0x100f"
:status :complete
:comment "All resolution and mode supported, calibration is available. Support sponsored by cncsolutions (http://www.cncsolutions.com.br)"
- added genesys backend from experimental area 2005-06-27 20:07:45 +00:00			`:backend "genesys"`
descriptions and man page updates for OpticBokk 3600 2010-12-27 06:08:44 +00:00			`:version "1.0-62"`
- added genesys backend from experimental area 2005-06-27 20:07:45 +00:00			`:manpage "sane-genesys"`
			`:comment "Only the USB scanners mentioned below are currently supported."`
Added link to genesys homepage. 2005-09-28 19:32:22 +00:00			`:url "http://www.meier-geinitz.de/sane/genesys-backend/"`
- added genesys backend from experimental area 2005-06-27 20:07:45 +00:00			`:devicetype :scanner`

			`; -----------------------------------------------------------------------------`

descriptions and man page updates for OpticBokk 3600 2010-12-27 06:08:44 +00:00			`:mfg "Plustek"`
			`:url "http://www.plustek.de/"`
			`:url "http://www.plustek.com/"`

			`:model "OpticBook 3600"`
			`:interface "USB"`
			`:usbid "0x07b3" "0x0900"`
			`:status :basic`
			`:comment "Has a Primax USB ID"`

			`; -----------------------------------------------------------------------------`

Used "Medion/Lifetec/Tevion/Cytron" as manufacturer as in the other backends. Used "ScanJet 2300C" as model name as in other backends. 2005-07-03 13:40:08 +00:00			`:mfg "Medion/Lifetec/Tevion/Cytron"`
- added genesys backend from experimental area 2005-06-27 20:07:45 +00:00			`:url "http://www.medion.com/"`
Used "Medion/Lifetec/Tevion/Cytron" as manufacturer as in the other backends. Used "ScanJet 2300C" as model name as in other backends. 2005-07-03 13:40:08 +00:00			`:url "http://www.medion.de/"`
- added genesys backend from experimental area 2005-06-27 20:07:45 +00:00
			`:model "MD5345"`
			`:interface "USB"`
Added USB vendor and product ids. Minor cleanups. 2006-01-08 22:01:51 +00:00			`:usbid "0x0461" "0x0377"`
			`:status :good`
- added genesys backend from experimental area 2005-06-27 20:07:45 +00:00			`:comment "Has a Primax USB ID"`

			`:model "MD6228"`
			`:interface "USB"`
Added USB vendor and product ids. Minor cleanups. 2006-01-08 22:01:51 +00:00			`:usbid "0x0461" "0x0377"`
			`:status :good`
- added genesys backend from experimental area 2005-06-27 20:07:45 +00:00			`:comment "Has a Primax USB ID. Same as MD5345"`

			`:model "MD6471"`
			`:interface "USB"`
Added USB vendor and product ids. Minor cleanups. 2006-01-08 22:01:51 +00:00			`:usbid "0x0461" "0x0377"`
			`:status :complete`
- added genesys backend from experimental area 2005-06-27 20:07:45 +00:00			`:comment "Has a Primax USB ID. Same as MD5345"`

			`; -----------------------------------------------------------------------------`

			`:mfg "Hewlett-Packard"`
Used "Medion/Lifetec/Tevion/Cytron" as manufacturer as in the other backends. Used "ScanJet 2300C" as model name as in other backends. 2005-07-03 13:40:08 +00:00			`:url "http://www.hp.com/"`

			`:model "ScanJet 2300C"`
- added genesys backend from experimental area 2005-06-27 20:07:45 +00:00			`:interface "USB"`
Added USB vendor and product ids. Minor cleanups. 2006-01-08 22:01:51 +00:00			`:usbid "0x03f0" "0x0901"`
			`:status :complete`
- added genesys backend from experimental area 2005-06-27 20:07:45 +00:00			`:comment "600x1200 dpi max"`

genesys documentation update 2009-10-06 19:52:54 +00:00			`:model "ScanJet 2400C"`
			`:interface "USB"`
genesys desc updates 2010-03-04 05:41:01 +00:00			`:usbid "0x03f0" "0x0a01"`
HP2400 support from Alexey Osipov <simba@lerlan.ru> - applied and tweaked a patch from Alexey Osipov to complete HP2400 support 2011-06-13 19:52:05 +00:00			`:status :complete`
genesys documentation update 2009-10-06 19:52:54 +00:00			`:comment "1200x1200 dpi max"`

added G2410 2010-02-10 20:25:54 +00:00			`:model "ScanJet G2410"`
			`:interface "USB"`
genesys desc updates 2010-03-04 05:41:01 +00:00			`:usbid "0x03f0" "0x0a01"`
added G2410 2010-02-10 20:25:54 +00:00			`:status :untested`
support for Panasonic KV-SS080 2010-08-31 20:13:42 +00:00			`:comment "clone of the HP 2400C"`
added G2410 2010-02-10 20:25:54 +00:00
genesys documentation update 2009-10-06 19:52:54 +00:00			`:model "ScanJet 3670C"`
			`:interface "USB"`
			`:usbid "0x03f0" "0x1405"`
genesys desc updates 2010-03-04 05:41:01 +00:00			`:status :complete`
changelog and desc entry for genesys backend update 2010-03-15 05:39:37 +00:00			`:comment "1200x1200 dpi max, complete transparency adaptor support"`
genesys documentation update 2009-10-06 19:52:54 +00:00
update HP3690 status to supported 2010-09-13 04:19:47 +00:00			`:model "ScanJet 3690C"`
			`:interface "USB"`
			`:usbid "0x03f0" "0x1405"`
			`:status :complete`
add HP 4850c as an untested gl843 device 2011-11-19 08:50:44 +00:00			`:comment "1200x1200 dpi max, same as HP 3670C"`

			`:model "ScanJet 4850C"`
			`:interface "USB"`
			`:usbid "0x03f0" "0x1b05"`
			`:status :untested`
			`:comment "resolution from 100 to 2400 supported, UTA not supported yet"`
update HP3690 status to supported 2010-09-13 04:19:47 +00:00
update G4010/G4050 status 2010-10-13 04:49:03 +00:00			`:model "ScanJet G4010"`
			`:interface "USB"`
			`:usbid "0x03f0" "0x4505"`
Changelog and doc changes for genesys backend update 2011-10-21 05:58:31 +00:00			`:status :good`
			`:comment "resolution from 100 to 2400 supported, UTA not supported yet"`
update G4010/G4050 status 2010-10-13 04:49:03 +00:00
support for Panasonic KV-SS080 2010-08-31 20:13:42 +00:00			`:model "ScanJet G4050"`
			`:interface "USB"`
update G4010/G4050 status 2010-10-13 04:49:03 +00:00			`:usbid "0x03f0" "0x4605"`
			`:status :basic`
Changelog and doc changes for genesys backend update 2011-10-21 05:58:31 +00:00			`:comment "resolution from 100 to 2400 supported, UTA not supported yet"`
support for Panasonic KV-SS080 2010-08-31 20:13:42 +00:00
update HP N6310 description 2011-11-20 07:05:39 +00:00			`:model "ScanJet N6310"`
			`:interface "USB"`
			`:usbid "0x03f0" "0x4705"`
			`:status :untested`
			`:comment "Not completed yet to capture the images"`

- added genesys backend from experimental area 2005-06-27 20:07:45 +00:00			`; -----------------------------------------------------------------------------`
Added Canon LiDE 35, 40, 50, 60. 2005-11-20 14:01:44 +00:00
			`:mfg "Canon"`
			`:url "http://www.canon.com/"`

			`:model "CanoScan LiDE 35"`
			`:interface "USB"`
Added USB vendor and product ids. Minor cleanups. 2006-01-08 22:01:51 +00:00			`:usbid "0x04a9" "0x2213"`
Added Canon LiDE 35, 40, 50, 60. 2005-11-20 14:01:44 +00:00			`:status :good`
			`:comment "Same ids as LiDE 50."`

			`:model "CanoScan LiDE 40"`
			`:interface "USB"`
Added USB vendor and product ids. Minor cleanups. 2006-01-08 22:01:51 +00:00			`:usbid "0x04a9" "0x2213"`
Change status of CanoScan LiDE 40 from untested to good 2010-05-03 20:17:31 +00:00			`:status :good`
			`:comment "Same ids as LiDE 50."`
Added Canon LiDE 35, 40, 50, 60. 2005-11-20 14:01:44 +00:00
			`:model "CanoScan LiDE 50"`
			`:interface "USB"`
Added USB vendor and product ids. Minor cleanups. 2006-01-08 22:01:51 +00:00			`:usbid "0x04a9" "0x2213"`
Changed status of Canon LiDE 50 and 60 to "good". Added comment for untested LiDE 40 to report any success/failure. 2005-12-06 10:50:07 +00:00			`:status :good`
Added Canon LiDE 35, 40, 50, 60. 2005-11-20 14:01:44 +00:00
			`:model "CanoScan LiDE 60"`
			`:interface "USB"`
Added USB vendor and product ids. Minor cleanups. 2006-01-08 22:01:51 +00:00			`:usbid "0x04a9" "0x221c"`
Changed status of Canon LiDE 50 and 60 to "good". Added comment for untested LiDE 40 to report any success/failure. 2005-12-06 10:50:07 +00:00			`:status :good`
- added the rts8891 man page to the doc/ makefile - added the Visioneer XP200 to the genesys desc file 2009-01-22 05:13:00 +00:00
changelog and doc update for genesys backend 2010-06-03 18:57:06 +00:00			`:model "CanoScan LiDE 100"`
			`:interface "USB"`
			`:usbid "0x04a9" "0x1904"`
			`:status :complete`
genesys backend update 2011-06-09 20:11:02 +00:00			`:comment "GL847 based, resolution from 75 to 2400 dpi"`
changelog and doc update for genesys backend 2010-06-03 18:57:06 +00:00
add new gl124 asic create a place holder for low level commands move low level functions to genesys_low.c GL124 progresses enable genesys_low debug and add DAC for LiDE 110 gl124 WIP - gl847 cleanups - genesys_low refactor - gl124 starting version GL124 WIP - read scancnt/fedcnt,valid words coded - memory layout coded LiDE110 WIP GL 124 WIP - definition and use of get/set double/triple - define register names all mods done, ready to test set fe OK GL124 WIP : ready to test scans GL124 WIP GL124 WIP - fixed analog fe issue: don't put afe regs in global set GL124 : first light at 300 dpi GL124 WIP - 300 and 600 uncalibrated mostly ok (x coordinate rounding) - 150 and 75 OK x-wise, y to be solved solved rounding errors for gl124 re-add 400, 200 and 100 dpi modes GL124 : tous x dpi OK before adding line cropping GL124 : line cropping almost finished GL124 WIP : working line deletion compute step rework GL124 WIP : high speed table for dpi <= 300 move to scan area working line skipping fix new slope table for 600 dpi base geometry and movement tuned GL124 WIP : shading calibration almost working working 600 dpi shading GL124 : working shading calibration for all modes but 1200 dpi working 1200 dpi shading beta 1 of GL124 support last tuning update genesys.desc for LiDE 110 motor slope and start area tuning shading coefficient computing clean up add support for GL124 based CanoScan LiDE 110 feed almost OK up to 300 dpi feeding is fixed all issues fixed 2010-11-06 20:12:56 +00:00			`:model "CanoScan LiDE 110"`
			`:interface "USB"`
			`:usbid "0x04a9" "0x1909"`
			`:status :complete`
description update for LiDE 110/210 2011-01-13 21:29:41 +00:00			`:comment "GL124 based, resolution from 75 to 2400 dpi"`
add new gl124 asic create a place holder for low level commands move low level functions to genesys_low.c GL124 progresses enable genesys_low debug and add DAC for LiDE 110 gl124 WIP - gl847 cleanups - genesys_low refactor - gl124 starting version GL124 WIP - read scancnt/fedcnt,valid words coded - memory layout coded LiDE110 WIP GL 124 WIP - definition and use of get/set double/triple - define register names all mods done, ready to test set fe OK GL124 WIP : ready to test scans GL124 WIP GL124 WIP - fixed analog fe issue: don't put afe regs in global set GL124 : first light at 300 dpi GL124 WIP - 300 and 600 uncalibrated mostly ok (x coordinate rounding) - 150 and 75 OK x-wise, y to be solved solved rounding errors for gl124 re-add 400, 200 and 100 dpi modes GL124 : tous x dpi OK before adding line cropping GL124 : line cropping almost finished GL124 WIP : working line deletion compute step rework GL124 WIP : high speed table for dpi <= 300 move to scan area working line skipping fix new slope table for 600 dpi base geometry and movement tuned GL124 WIP : shading calibration almost working working 600 dpi shading GL124 : working shading calibration for all modes but 1200 dpi working 1200 dpi shading beta 1 of GL124 support last tuning update genesys.desc for LiDE 110 motor slope and start area tuning shading coefficient computing clean up add support for GL124 based CanoScan LiDE 110 feed almost OK up to 300 dpi feeding is fixed all issues fixed 2010-11-06 20:12:56 +00:00
genesys desc update 2010-12-24 07:51:44 +00:00			`:model "CanoScan LiDE 200"`
			`:interface "USB"`
			`:usbid "0x04a9" "0x1905"`
			`:status :complete`
doc update for LiDE 200 4800 dpi mode 2011-07-06 19:50:35 +00:00			`:comment "GL847 based, resolution from 75 to 4800 dpi"`
genesys desc update 2010-12-24 07:51:44 +00:00
add an device entry for LiDE 210 2010-12-15 05:24:55 +00:00			`:model "CanoScan LiDE 210"`
			`:interface "USB"`
			`:usbid "0x04a9" "0x190a"`
LiDE 210 tuning - dynamic lineart not enabled by default 2010-12-16 21:10:37 +00:00			`:status :complete`
description update for LiDE 110/210 2011-01-13 21:29:41 +00:00			`:comment "GL124 based, resolution from 75 to 2400 dpi"`
add an device entry for LiDE 210 2010-12-15 05:24:55 +00:00
genesys desc update 2010-12-24 07:51:44 +00:00			`:model "CanoScan 5600F"`
Canon LiDE 200 support up to 1200 DPI 2010-06-15 19:12:32 +00:00			`:interface "USB"`
genesys desc update 2010-12-24 07:51:44 +00:00			`:usbid "0x04a9" "0x1906"`
			`:status :unsupported`
			`:comment "GL847 based, to be added to the genesys backend"`

			`:model "CanoScan 700F"`
			`:interface "USB"`
			`:usbid "0x04a9" "0x1907"`
doc and changelog update for LiDE 700F support update 2012-05-28 06:24:12 +00:00			`:status :good`
changelog entry for genesys backend build 81 2012-05-29 14:13:25 +00:00			`:comment "GL847 based, resolution from 75 to 4800 dpi"`
Canon LiDE 200 support up to 1200 DPI 2010-06-15 19:12:32 +00:00
- added the rts8891 man page to the doc/ makefile - added the Visioneer XP200 to the genesys desc file 2009-01-22 05:13:00 +00:00			`; -----------------------------------------------------------------------------`

			`:mfg "Visioneer"`
			`:url "http://www.visioneer.com/"`

Description updates for genesys backend. 2009-05-29 19:59:11 +00:00			`:model "Strobe XP 100,r3"`
			`:interface "USB"`
			`:usbid "0x04a7" "0x049b"`
calibration and configuration fix - fixed genesys.conf for 2 missing models - updated desc file - definitive fix for shhetfed calibration 2009-11-16 20:28:27 +00:00			`:status :good`
			`:comment "All resolution and mode supported, calibration is available"`
Description updates for genesys backend. 2009-05-29 19:59:11 +00:00
- added the rts8891 man page to the doc/ makefile - added the Visioneer XP200 to the genesys desc file 2009-01-22 05:13:00 +00:00			`:model "Strobe XP 200"`
			`:interface "USB"`
			`:usbid "0x04a7" "0x0426"`
genesys documentation update 2009-10-06 19:52:54 +00:00			`:status :good`
			`:comment "All resolution and mode supported, calibration is available"`
Remove "init device" usb request, add some support for Visioneer Strobe XP300. Add support for uncalibrated scans in all modes for Visioneer Strobe XP300. Front- and backside are side-by-side, backside mirrored horizontally. 2009-02-08 18:59:59 +00:00
			`:model "Strobe XP 300"`
			`:interface "USB"`
			`:usbid "0x04a7" "0x0474"`
genesys documentation update 2009-10-06 19:52:54 +00:00			`:status :good`
			`:comment "All resolution and mode supported, calibration is available, front- and backside side-by-side, with backside mirrored horizontally."`
Add Pentax DSmobile 600 Thanks go to Jack McGill for providing the model specific settings. 2009-05-19 14:24:59 +00:00
Description updates for genesys backend. 2009-05-29 19:59:11 +00:00			`:model "Roadwarrior"`
			`:interface "USB"`
			`:usbid "0x04a7" "0x0494"`
			`:status :basic`
calibration and configuration fix - fixed genesys.conf for 2 missing models - updated desc file - definitive fix for shhetfed calibration 2009-11-16 20:28:27 +00:00			`:comment "All resolution and mode supported, calibration is available"`
Description updates for genesys backend. 2009-05-29 19:59:11 +00:00
type fix 2010-01-19 20:37:37 +00:00			`:model "Visioneer OneTouch 7100"`
add visioneer OneTouch 7100 2010-01-19 20:35:01 +00:00			`:interface "USB"`
			`:usbid "0x04a7" "0x0229"`
			`:status :complete`
			`:comment "Same as MD5345"`

Add Pentax DSmobile 600 Thanks go to Jack McGill for providing the model specific settings. 2009-05-19 14:24:59 +00:00			`; -----------------------------------------------------------------------------`

			`:mfg "Pentax"`
			`:url "http://www.pentaxtech.com/"`
			`:url "http://mobilesolutions.brother-usa.com/"`

			`:model "DSmobile 600"`
			`:interface "USB"`
			`:usbid "0x0a17" "0x3210"`
genesys documentation update 2009-10-06 19:52:54 +00:00			`:status :good`
			`:comment "All resolution and mode supported, calibration is available"`
Add Syscan 485, DCT 487; update descriptions for Syscan Thanks again to Jack McGill. 2009-05-19 22:31:32 +00:00
add DSmobile variant 2011-01-17 20:31:03 +00:00			`:model "DSmobile 600"`
			`:interface "USB"`
			`:usbid "0x04f9" "0x2038"`
			`:status :good`
			`:comment "All resolution and mode supported, calibration is available"`

Add Syscan 485, DCT 487; update descriptions for Syscan Thanks again to Jack McGill. 2009-05-19 22:31:32 +00:00			`; -----------------------------------------------------------------------------`

			`:mfg "DCT"`
			`:url "http://www.docucap.com/"`
			`:comment "Successor of Syscan in the USA"`

			`:model "DocketPort 487"`
			`:interface "USB"`
			`:usbid "0x1dcc" "0x4810"`
calibration and configuration fix - fixed genesys.conf for 2 missing models - updated desc file - definitive fix for shhetfed calibration 2009-11-16 20:28:27 +00:00			`:status :basic`
			`:comment "All resolution and mode supported, calibration is available, front- and backside side-by-side, with backside mirrored horizontally."`
Add Syscan 485, DCT 487; update descriptions for Syscan Thanks again to Jack McGill. 2009-05-19 22:31:32 +00:00
			`; -----------------------------------------------------------------------------`

			`:mfg "Syscan"`

			`:model "DocketPort 485"`
			`:interface "USB"`
			`:usbid "0x0a82" "0x4810"`
			`:status :basic`
calibration and configuration fix - fixed genesys.conf for 2 missing models - updated desc file - definitive fix for shhetfed calibration 2009-11-16 20:28:27 +00:00			`:comment "All resolution and mode supported, front- and backside side-by-side, with backside mirrored horizontally."`
Add Syscan 485, DCT 487; update descriptions for Syscan Thanks again to Jack McGill. 2009-05-19 22:31:32 +00:00
			`:model "DocketPort 465"`
			`:interface "USB"`
			`:usbid "0x0a82" "0x4802"`
Description updates for genesys backend. 2009-05-29 19:59:11 +00:00			`:status :untested`
			`:comment "All resolution and mode should be supported, but uncorrected scans"`
Add Syscan 485, DCT 487; update descriptions for Syscan Thanks again to Jack McGill. 2009-05-19 22:31:32 +00:00
			`:model "DocketPort 665"`
			`:interface "USB"`
			`:usbid "0x0a82" "0x4803"`
			`:status :basic`
add support for Ambir/Syscan DS685 2009-12-05 06:23:40 +00:00			`:comment "All resolution and mode supported, calibration is available"`

			`:model "DocketPort 685/ Ambir DS685"`
			`:interface "USB"`
			`:usbid "0x0a82" "0x480c"`
			`:status :good`
			`:comment "All resolution and mode supported, calibration is available, front- and backside side-by-side, with backside mirrored horizontally."`
entry fro Xero Travel Scanner 100 2010-01-30 13:20:21 +00:00
			`:mfg "Xerox"`
update Xerox OneTouch 2400 status to complete 2012-05-31 19:14:23 +00:00			`:url "http://www.xerox.com/"`
entry fro Xero Travel Scanner 100 2010-01-30 13:20:21 +00:00
			`:model "Travel Scanner 100"`
			`:interface "USB"`
			`:usbid "0x04a7" "0x04ac"`
			`:status :good`
			`:comment "All resolution and mode supported, calibration is available"`
support for Panasonic KV-SS080 2010-08-31 20:13:42 +00:00
update Xerox OneTouch 2400 status to complete 2012-05-31 19:14:23 +00:00			`:model "2400 Onetouch"`
			`:interface "USB"`
			`:usbid "0x0461" "0x038b"`
			`:status :complete`
			`:comment "GL646 based, resolution from 75 to 2400 dpi"`


descriptions and man page updates for OpticBokk 3600 2010-12-27 06:08:44 +00:00			`; -----------------------------------------------------------------------------`

support for Panasonic KV-SS080 2010-08-31 20:13:42 +00:00			`:mfg "Panasonic"`

			`:model "KV-SS080"`
			`:interface "USB"`
			`:usbid "0x04da" "0x100f"`
genesys build 32 update 2010-09-04 05:31:13 +00:00			`:status :complete`
genesys backend update - enable 16 bit gamma for GL124 scanners - genesys doc credits and models update 2010-12-26 11:08:01 +00:00			`:comment "All resolution and mode supported, calibration is available. Support sponsored by cncsolutions (http://www.cncsolutions.com.br)"`