rshell ========= Remote MicroPytyhon shell. This is a simple shell which runs on the host and uses MicroPython's raw-REPL to send python snippets to the pyboard in order to get filesystem information, and to copy files to and from MicroPython's filesystem. It also has the ability to invoke the regular REPL, so rshell can be used as a terminal emulator as well. Note: With rshell you can disable USB Mass Storage and still copy files into and out of your pyboard. When using the commands, the /flash directory, and the /sdcard directory (if an sdcard is inserted) are considered to be on the pyboard, and all other directories are considered to be on the host. NOTE: rshell requires a fairly recent version of the MicroPython firmware, specifically one which contains the ubinascii.unhexlify command which was added May 19, 2015 (v1.4.3-28-ga3a14b9 or newer). If your verion of the firmware isn't new enough, then you'll see an error message something like this: :: >./rshell.py rshell needs MicroPython firmware with ubinascii.unhexlify Installation ============ You can install rshell using the command: :: sudo pip3 install rshell If you use a virtualenv, then you don't need the sudo. rshell needs Python3. All of my testing was done using version 3.4.0. Debian/Ubuntu users can get pip3 using: :: sudo apt-get install python3-pip Sample Session ============== This shows a pyboard in its default state, copying a hello.py and then entering the repl and importing it. :: >rshell Welcome to rshell. Use Control-D to exit. /home/dhylands/Dropbox/micropython/rshell> ls -l /flash 529 May 21 17:34 README.txt 286 May 21 17:34 boot.py 34 May 21 17:34 main.py 2436 May 21 17:34 pybcdc.inf /home/dhylands/Dropbox/micropython/rshell> cp hello.py /flash /home/dhylands/Dropbox/micropython/rshell> ls -l /flash 529 May 21 17:34 README.txt 286 May 21 17:34 boot.py 21 May 21 17:35 hello.py 34 May 21 17:34 main.py 2436 May 21 17:34 pybcdc.inf /home/dhylands/Dropbox/micropython/rshell> cat /flash/hello.py print('Hello World') /home/dhylands/Dropbox/micropython/rshell> repl Entering REPL. Use Control-X to exit. Micro Python v1.4.3-28-ga3a14b9 on 2015-05-21; PYBv1.0 with STM32F405RG Type "help()" for more information. >>> >>> import hello Hello World >>> /home/dhylands/Dropbox/micropython/rshell> Command Line Options ==================== -h, --help ---------- Displays a lit of the valid options. You should get something like the following displayed: :: usage: rshell [options] [command] Remote Shell for a MicroPython board. positional arguments: cmd Optional command to execute optional arguments: -h, --help show this help message and exit -b BAUD, --baud BAUD Set the baudrate used (default = 115200) --buffer-size BUFFER_SIZE Set the buffer size used for transfers (default = 512) -p PORT, --port PORT Set the serial port to use (default '/dev/ttyACM0') -u USER, --user USER Set username to use (default 'micro') -w PASSWORD, --password PASSWORD Set password to use (default 'python') -e EDITOR, --editor EDITOR Set the editor to use (default 'vi') -f FILENAME, --file FILENAME Specifies a file of commands to process. -d, --debug Enable debug features -n, --nocolor Turn off colorized output --wait How long to wait for serial port --timing Print timing information about each command --quiet Turns off some output (useful for testing) You can specify the default serial port using the RSHELL_PORT environment variable. -b BAUD, --baud BAUD -------------------- Sets the baud rate to use when talking to the pyboard over a serial port. If no baud is specified, then the baudrate from the RSHELL_BAUD enviroinment variable is used. If the RSHELL_BAUD environment variable is not defined then the default baudrate of 115200 is used. --buffer-size ------------- Sets the buffer size used when transferring files betweem the host and the pyboard. If no buffer size is specified, then the value from the RSHELL_BUFFER_SIZE environment variable is used. If the RSHELL_BUFFER_SIZE environment variable is not defined, then the default of 512 is used. -d, --debug ----------- Turns on debugging. This allows you to see the script which is sent over the raw REPL and the response received. -e EDITOR, --editor ------------------- Specifies the editor to use with the edit command. If no editor is specified, then the following environment variables will be searched: RSHELL_EDITOR, VISUAL, and EDITOR. If none of those environment variables is set then vi will be used. -f FILENAME, --file FILENAME ---------------------------- Specifies a file of rshell commands to process. This allows you to create a script which executes any valid rshell commands. -n, --nocolor ------------- By default, rshell uses ANSI color escape codes when displaying the prompt and ls output. This option allows colorized output to be disabled. --wait ------ If a port is specified defines how long rshell will wait for the port to exist and for a connection to be established. The default is 0 seconds specifying an immediate return. -p PORT, --port PORT -------------------- Specifies the serial port which should be used to talk to the MicroPython board. You can set the RSHELL\_PORT environment variable to specify the default port to be used, if --port is not specified on the command line. --quiet ------- This option causes the Connecting messages printed when rshell starts to be suppressed. This is mostly useful the test scripts. --timing -------- If the timing option is specified then rshell will print the amount of time that each command takes to execute. -u USER, --user USER -------------------- Specifies the username to use when logging into a WiPy over telent. If no username is specified, then the username from the RSHELL_USER environment variable is used. If the RSHELL_USER environment variable doesn't exist then the default username 'micro' is used. -w PASSWORD, --password PASSWORD -------------------------------- Specified the password to use when logging into a WiPy over telnet. If no password is specified, then the password from the RSHELL_PASSWORD environment variable is used. If the RSHELL_PASSWORD environment variable doesn't exist then the default password 'python' is used. cmd --- If a command is specified, then that command will be executed and rshell will exit. Examples: :: rshell cp somefile.py /flash rshell repl ~ pyb.bootloader() ~ File System =========== rshell can be connected to multiple pyboards simultaneously. If the board module exists on the pyboard (i.e. a file named board.py somewhere in the module search path) and it contains an attribute called name then the pyboard will use that name. If the board module can't be imported then the board will be named, pyboard or wipy. Names will have -1 (or some other number) to make the board name unique. You can access the internal flash on the first board connected using /flash and the sd card on the first board connected can be accessed using /sd. For all other connected pyboards, you can use /board-name/flash or /board-name/sd (you can see the board names using the boards command). The boards command will show all of the connected pyboards, along with all of the directories which map onto that pyboard. Commands ======== args ---- :: args [arguments...] Debug function for verifying argument parsing. This function just prints out each argument that it receives. boards ------ :: boards Lists all of the boards that rshell is currently connected to, their names, and the connection. cat --- :: cat FILENAME... Concatinates files and sends to stdout. cd -- :: cd DIRECTORY Changes the current directory. ~ expansion is supported, and cd - goes to the previous directory. connect ------- :: connect TYPE TYPE_PARAMS connect serial port [baud] connect telnet ip-address-or-name Connects a pyboard to rshell. rshell can be connected to multiple pyboards simultaneously. cp -- :: cp SOURCE DEST cp SOURCE... DIRECTORY Copies the SOURCE file to DEST. DEST may be a filename or a directory name. If more than one source file is specified, then the destination should be a directory. echo ---- :: echo TEXT... Display a line of text. edit ---- :: edit filename If the file is on a pyboard, it copies the file to host, invokes an editor and if any changes were made to the file, it copies it back to the pyboard. The editor which is used defaults to vi, but can be overridem using either the --editor command line option when rshell.py is invoked, or by using the RSHELL\_EDITOR, VISUAL or EDITOR environment variables (they are tried in the order listed). filesize -------- :: filesize FILE Prints the size of the file, in bytes. This function is primarily testing. filetype -------- :: filetype FILE Prints the type of file (dir or file). This function is primarily for testing. help ---- :: help [COMMAND] List available commands with no arguments, or detailed help when a command is provided. ls -- :: usage: ls [-a] [-l] FILE... List directory contents. positional arguments: FILE Files or directories to list optional arguments: -h, --help show this help message and exit -a, --all do not ignore hidden files -l, --long use a long listing format mkdir ----- :: mkdir DIRECTORY... Creates one or more directories. repl ---- :: repl [board-name] [~ line][ ~] Enters into the regular REPL with the MicroPython board. Use Control-X to exit REPL mode and return the shell. It may take a second or two before the REPL exits. If you provide a board-name then rshell will connect to that board, otherwise it will connect to the default board (first connected board). If you provide a tilde followed by a space (~ ) then anything after the tilde will be entered as if you typed it on the command line. If you want the repl to exit, end the line with the ~ character. For example, you could use: :: rshell.py repl ~ pyb.bootloader()~ and it will boot the pyboard into DFU. rm -- :: usage: rm [-r|--recursive][-f|--force] FILE... Removes files or directories (directories must be empty). positional arguments: FILE File to remove optional arguments: -h, --help show this help message and exit -r, --recursive remove directories and their contents recursively -f, --force ignore nonexistant files and arguments shell ----- The shell command can also be abbreviated using the exclamation point. :: shell some-command !some-command This will invoke a command, and return back to rshell. Example: :: !make deploy will flash the pyboard.