This program provides a cut preview of your GCODE, where it will cut, by simply taking a picture of the CNC bed with your wood on bed

Go to file

unknown 637b9a9777 adjusting actual image location for found reference point location		2022-02-25 22:11:37 -06:00
Originals	recovery files from laptop, gerbil sending started	2022-01-05 22:32:13 -06:00
__pycache__	temp update	2022-01-13 18:48:35 -06:00
IMG_20211208_194811847.jpg	…
IMG_20211210_215851830.jpg	recovery files from laptop, gerbil sending started	2022-01-05 22:32:13 -06:00
LICENSE	…
PatternToPrintForCnC_Charuco.png	next step is to work on interface to move svg arround	2021-12-20 17:45:42 -05:00
README.md	…
callbackloghandler.py	initial stab at sending G code with offset and rotated data, need to test out with actual machine	2021-12-28 18:54:25 -05:00
cnc.jpeg	…
cnc.jpg	recovery files from laptop, gerbil sending started	2022-01-05 22:32:13 -06:00
cnc2.jpeg	left right detection working somewhat, need to refine what points corespond to real world points better	2021-12-19 18:03:11 -05:00
cnc3.jpeg	next step is to work on interface to move svg arround	2021-12-20 17:45:42 -05:00
cnc4.jpeg	add in estimate of plate angle to probing of plate	2022-02-24 23:04:21 -06:00
gcode_machine.py	initial stab at sending G code with offset and rotated data, need to test out with actual machine	2021-12-28 18:54:25 -05:00
gerbil.py	initial stab at sending G code with offset and rotated data, need to test out with actual machine	2021-12-28 18:54:25 -05:00
interface.py	initial stab at sending G code with offset and rotated data, need to test out with actual machine	2021-12-28 18:54:25 -05:00
pattern.jpg	recovery files from laptop, gerbil sending started	2022-01-05 22:32:13 -06:00
realWorldGcodeSender.py	adjusting actual image location for found reference point location	2022-02-25 22:11:37 -06:00
test - Copy.jpeg	…
test - Copy.nc	intermediate commit	2021-12-22 18:11:10 -05:00
test.jpeg	…
test.nc	intermediate commit	2021-12-22 18:11:10 -05:00
test.png	…
test.py	…

README.md

realWorldGcodeSender

Put a camera above your CNC machine. Put 3 circles on outside of your CNC bed. Program will overlay your G code onto the camera image, showing you where it will cut in the real world.