kopia lustrzana https://github.com/dl9rdz/rdz_ttgo_sonde
Update readme with installation instructions
rodzic
d8edd44a96
commit
4b23a3a36e
22
README.md
22
README.md
|
@ -40,6 +40,28 @@ Adding support for LMS6 (see issue #48) and ims100 (see branch ims100) could be
|
|||
but currently I don't have plans to do add this myself. Well-tested pull requests will of
|
||||
course be considered for inclusion :-).
|
||||
|
||||
## Installation
|
||||
|
||||
You can download the latest binary automated build for the development and testing branches [here](http://rdzsonde.mooo.com/download.html), the binary includes everything including configuration files so any existing settings will be reset.
|
||||
|
||||
To update an existing installatiom to the latest development or master version you can use the [OTA](https://github.com/dl9rdz/rdz_ttgo_sonde/wiki/Other-features#over-the-air-updates) update feature.
|
||||
|
||||
The downloaded .bin file can be flashed to your ESP32 board using [esptool](https://github.com/espressif/esptool) or [ESP32 Download Tool](https://www.espressif.com/en/support/download/other-tools)
|
||||
|
||||
### esptool
|
||||
|
||||
You can run the following command replacing `<filename.bin>` with the path to the downloaded .bin file.
|
||||
|
||||
If you encounter errors with the device COM not automatically being detected replace `/dev/cu.SLAB_USBtoUART` with `COM<X>`.
|
||||
|
||||
```
|
||||
esptool --chip esp32 --port /dev/cu.SLAB_USBtoUART --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size detect 0x1000 <filename.bin>
|
||||
```
|
||||
|
||||
### ESP32 Download Tool
|
||||
|
||||
The binary file can also be installed using the GUI application with the [following](http://rdzsonde.mooo.com/) settings.
|
||||
|
||||
## Button commands
|
||||
|
||||
You can use the button on the board (not the reset button, the second one) to
|
||||
|
|
Ładowanie…
Reference in New Issue