kopia lustrzana https://github.com/dl9rdz/rdz_ttgo_sonde
ILI9351 support
Hansi, dl9rdz
rodzic
cf47a01cb0
commit
4601fb6cb4
|
|
@ -545,7 +545,7 @@ struct st_configitems config_list[] = {
|
|||
{"wifi", "Wifi mode (0/1/2/3)", 0, &sonde.config.wifi},
|
||||
{"debug", "Debug mode (0/1)", 0, &sonde.config.debug},
|
||||
{"maxsonde", "Maxsonde", 0, &sonde.config.maxsonde},
|
||||
{"screenfile", "Screen config (0=old, 1=OLED, 2=TFT, 3=TFT[port])", 0, &sonde.config.screenfile},
|
||||
{"screenfile", "Screen config (0=old, 1=OLED, 2/3=ILI9251 l/p, 4/5=ILI9341 l/p", 0, &sonde.config.screenfile},
|
||||
{"display", "Display screens (scan,default,...)", -6, sonde.config.display},
|
||||
/* Spectrum display settings */
|
||||
{"spectrum", "Show spectrum (-1=no, 0=forever, >0=seconds)", 0, &sonde.config.spectrum},
|
||||
|
|
@ -601,7 +601,7 @@ struct st_configitems config_list[] = {
|
|||
|
||||
/* Hardware dependeing settings */
|
||||
{"", "Hardware configuration (requires reboot)", -5, NULL},
|
||||
{"disptype", "Display type (0=OLED/SSD1306, 1=TFT/ILI9225, 2=OLED/SH1106)", 0, &sonde.config.disptype},
|
||||
{"disptype", "Display type (0=OLED/SSD1306, 1=ILI9225, 2=OLED/SH1106, 3=ILI9341)", 0, &sonde.config.disptype},
|
||||
{"norx_timeout", "No-RX-Timeout in seconds (-1=disabled)", 0, &sonde.config.norx_timeout},
|
||||
{"oled_sda", "OLED SDA/TFT SDA", 0, &sonde.config.oled_sda},
|
||||
{"oled_scl", "OLED SCL/TFT CLK", 0, &sonde.config.oled_scl},
|
||||
|
|
|
|||
|
|
@ -0,0 +1,574 @@
|
|||
## screens2.txt: TFT display (landscape)
|
||||
# Definition of display content and action behaviour
|
||||
#
|
||||
# Timer: (view timer, rx timer, norx timer)
|
||||
# - value -1: timer is disabled; value>=0: timer fires after (value) seconds
|
||||
# - view timer: time since current view (display mode and sonde) was started
|
||||
# - rx timer: time since when sonde data has been received continuously (trigger immediatly after RX)
|
||||
# - norx timer: time since when no sonde data has been received continuously
|
||||
# (rx and norx timer is started after tuning a new frequency and receiving a signal or not receiving
|
||||
# anything for a 1s period)
|
||||
#
|
||||
# Actions:
|
||||
# - W: activate WiFi scan
|
||||
# - F: activate frequency spectrum display
|
||||
# - 0: activate "Scan:" display (this is basically just display mode 0)
|
||||
# - x: (1..N): activate display mode x [deprecated]
|
||||
# - >: activate next display mode
|
||||
# - D: activate default receiver display (display mode specified in config)
|
||||
# - +: advance to next active sonde from QRG config
|
||||
# - #: no action
|
||||
#
|
||||
# Display content (lower/upper case: small/large font)
|
||||
# line,column=content
|
||||
# for ILI9225 its also possible to indicate
|
||||
# line,column,width=content for text within a box of width 'width'
|
||||
# line,column,-width=content for right-justified text
|
||||
#
|
||||
# XText : Text
|
||||
# F(suffix): frequency (with suffix, e.g., " MHz")
|
||||
# L latitade
|
||||
# O lOngitute
|
||||
# A altitude
|
||||
# Hm(suffix) hor. speed m/s (suffix: e.g. "m/s"; no suffix=>m/s as 16x8 bitmap for SSD1306 display only)
|
||||
# Hk(suffix) hor. speed km/h (suffix: e.g. "km/h"; no suffix=>km/h as 16x8 bitmap for SSD1306 display only)
|
||||
# V(suffix) vert. speef (suffix: e.g. "m/s"; no suffix=>m/s as 16x8 bitmap for SSD1306 display only)
|
||||
# Ix sonde ID (default/d: dxlaprs; s: short id, n: real serial number)
|
||||
# RS41,RS92: all identical R1234567
|
||||
# DFMx: ID M12345678; short ID and serial 12345678
|
||||
# M10: ID ME95231F0; short ID: M95231F0; serial 9062104592
|
||||
# Q signal quality statistics bar
|
||||
# T type string (RS41/DFM9/DFM6/RS92)
|
||||
# C afC value
|
||||
# N ip address (only tiny font)
|
||||
# S scan list entry info: l/empty: launch site name, #=entry nr, t=total entries, a=active entries, /: #/t
|
||||
# K RS41 kill timer values: Kl launch timer, Kb burst timer, Kc kill countdown
|
||||
# format: K_4: h:mm k_6: h:mm:ss k_s: sssss, nothing shown for other sonde
|
||||
# Mx telemetry value x (t temp p preassure h hyg) [not yet implemented, maybe some day in future]
|
||||
# Gx GPS-related data
|
||||
# raw data from GPS: GA, GO, GH, GC: LAtitude, lOngitude, Altutide(Height), Course over ground
|
||||
# relative to sonde: GD, GI, GB: Distance, dIrection (absolute), relative Bearing
|
||||
# G0 GPS circle diagram e.g. 3,5=g0NCS,50,ff0000,000033,5,ffff00,4,ffffff
|
||||
# "N" (what is on top: N=north C=course)
|
||||
# "C" (where does the arrow point to: C=course, S=sonde)
|
||||
# "S" (what is shown by the bullet: C=course, S=sonde)
|
||||
# 50: circle radius, followed by fg and bg color
|
||||
# 5: bullet radius, followed by fg color
|
||||
# 4: arrow width, followed by fg color
|
||||
# R RSSI
|
||||
# B battery(T-Beam 1.0) S=status V=Batt.Volt C=charge current D=discharge current
|
||||
# U=USB volt I=USB current T=IC temp
|
||||
#
|
||||
# fonts=x,y can be used to select font (x=small, y=large) for all items below
|
||||
# for SSD1306, x and y can be used to select one of those fonts:
|
||||
# (y should be a 1x2 font (1,5,6,7), x a small font)
|
||||
# u8x8_font_chroma48medium8_r, // 0 ** default small
|
||||
# u8x8_font_7x14_1x2_f, // 1 ** default large
|
||||
# u8x8_font_amstrad_cpc_extended_f, // 2
|
||||
# u8x8_font_5x7_f, // 3
|
||||
# u8x8_font_5x8_f, // 4
|
||||
# u8x8_font_8x13_1x2_f, // 5
|
||||
# u8x8_font_8x13B_1x2_f, // 6
|
||||
# u8x8_font_7x14B_1x2_f, // 7
|
||||
# u8x8_font_artossans8_r, // 8
|
||||
# u8x8_font_artosserif8_r, // 9
|
||||
# u8x8_font_torussansbold8_r, // 10
|
||||
# u8x8_font_victoriabold8_r, // 11
|
||||
# u8x8_font_victoriamedium8_r, // 12
|
||||
# u8x8_font_pressstart2p_f, // 13
|
||||
# u8x8_font_pcsenior_f, // 14
|
||||
# u8x8_font_pxplusibmcgathin_f, // 15
|
||||
# u8x8_font_pxplusibmcga_f, // 16
|
||||
# u8x8_font_pxplustandynewtv_f, // 17
|
||||
#
|
||||
# for ILI9225, these fonts are available:
|
||||
# Terminal6x8 // 0
|
||||
# Terminal11x16 // 1
|
||||
# Terminal12x16 // 2
|
||||
# FreeMono9pt7b, // 3
|
||||
# FreeMono12pt7b, // 4
|
||||
# FreeSans9pt7b, // 5
|
||||
# FreeSans12pt7b, // 6
|
||||
# Picopixel, // 7
|
||||
#
|
||||
# color=rrggbb,rrggbb can be used to select color (foreground, background)
|
||||
# see https://github.com/Nkawu/TFT_22_ILI9225/wiki#color-reference for example (use without "#"-sign)
|
||||
#
|
||||
# for TFT display, coordinates and width are multiplied by xscale,yscale and later used in pixels
|
||||
# with scale=1,1 you can directly use pixel coordinates. (default: xscale=13,yscale=22 => 8 lines, 16 columns)
|
||||
###########
|
||||
|
||||
############
|
||||
# Scan display for large 2" TFT dispaly
|
||||
@ScannerTFT
|
||||
scale=30,18
|
||||
timer=-1,0,0
|
||||
key1action=D,#,F,W
|
||||
key2action=D,#,#,#
|
||||
timeaction=#,D,+
|
||||
fonts=5,6
|
||||
0,0=XScan
|
||||
0,5,-3=S#:
|
||||
0,9,5.5=T
|
||||
3,0=F MHz
|
||||
5,0,16=S
|
||||
7,5=n
|
||||
|
||||
############
|
||||
@MainTFT
|
||||
timer=-1,-1,N
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,0
|
||||
color=FFD700
|
||||
0,0,10.5=Is
|
||||
color=0000FF
|
||||
0,11,-5.5=f
|
||||
1,0,4=t
|
||||
1,10.5,-6=c
|
||||
color=00ff00
|
||||
2,0,7=L
|
||||
4,0,7=O
|
||||
color=FFA500
|
||||
2,9.5,-7=A
|
||||
3,9.5,-7=vm/s
|
||||
color=AA5522
|
||||
4,9.5,-7=hkkm/h
|
||||
color=FFFFFF
|
||||
6,2=r
|
||||
6.3,10=Q4
|
||||
7,0=xd=
|
||||
7,2,6=gD
|
||||
7,12=gI
|
||||
|
||||
############
|
||||
@PeilungTFT
|
||||
timer=-1,-1,N
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,#
|
||||
color=ffff00,000033
|
||||
color=bbbbbb,000000
|
||||
0,2=xN Top:
|
||||
0,8=xCourse Top:
|
||||
color=ffff00,000033
|
||||
1,0=g0NCS,48,ffff00,000044,6,33ff33,5,eeaa00
|
||||
1,8=g0CCS,48,ffff00,000044,6,55ff55,5,eeaa00
|
||||
color=ffffff,000000
|
||||
6,0=xDirection:
|
||||
6,8,4=gI
|
||||
7,0=xCOG:
|
||||
7,4,4=gC
|
||||
7,8=xturn:
|
||||
7,12,4=gB
|
||||
|
||||
############
|
||||
@GPSdataTFT
|
||||
timer=-1,-1,N
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,#
|
||||
0,0=xOn-board GPS:
|
||||
1,0,8=gA
|
||||
2,0,8=gO
|
||||
3,0,8=gH
|
||||
4,0,8=gC
|
||||
5,0=xGPS vs Sonde:
|
||||
6,0,8=gD
|
||||
7,0,8=gI
|
||||
7,8,8=gB
|
||||
|
||||
############
|
||||
@BatteryTFT
|
||||
timer=-1,-1,-1
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,#
|
||||
0,0=xBattery status:
|
||||
0,14=bS
|
||||
1,0=xBatt:
|
||||
1,5,5=bVV
|
||||
2,0,16=bCmA(charging)
|
||||
3,0,16=bDmA(discharging)
|
||||
4.4,0=xUSB:
|
||||
4.4,5,5=bUV
|
||||
5.4,0,10=bImA
|
||||
6.4,0=xTemp:
|
||||
6.4,5,5=bT C
|
||||
|
||||
### Alternative display layouts based on https://gist.github.com/bazjo
|
||||
# Scan display for large 2" TFT dispaly
|
||||
@Scan.TFT.Bazjo
|
||||
timer=-1,0,0
|
||||
key1action=D,#,F,W
|
||||
key2action=D,#,#,#
|
||||
timeaction=#,D,+
|
||||
scale=11,10
|
||||
fonts=0,2
|
||||
color=e0e0e0
|
||||
#Row 1
|
||||
0.5,0=XScanning...
|
||||
#Row 2
|
||||
3,0=xIndex
|
||||
4,0,8=S/
|
||||
3,9=xSite
|
||||
4,9=S
|
||||
#Row 3
|
||||
6,0=xType
|
||||
7,0,6=T
|
||||
6,9=xFrequency
|
||||
7,9=F
|
||||
#Row 4
|
||||
9,0=xWeb UI IP
|
||||
10,0=N
|
||||
#Row 5
|
||||
#Footer
|
||||
color=6C757D
|
||||
15,0=xScan Mode
|
||||
15,18=bVV
|
||||
|
||||
############
|
||||
@Decode/General.TFT.Bazjo
|
||||
timer=-1,-1,N
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,0
|
||||
scale=11,10
|
||||
fonts=0,2
|
||||
#Row 1
|
||||
color=996A06
|
||||
0,0=xSerial
|
||||
0,5=t
|
||||
color=FFB10B
|
||||
1,0=Is
|
||||
color=996A06
|
||||
0,11=xFreq.
|
||||
0,16=c
|
||||
color=FFB10B
|
||||
1,11=F
|
||||
#Row 2
|
||||
color=3C5C99
|
||||
3,0=xLatitude
|
||||
color=639AFF
|
||||
4,0=L
|
||||
color=3C5C99
|
||||
3,11=xLongitude
|
||||
color=639AFF
|
||||
4,11=O
|
||||
#Row 3
|
||||
color=3C5C99
|
||||
6,0=xHoriz. Speed
|
||||
color=639AFF
|
||||
7,0=Hkkm/h
|
||||
color=3C5C99
|
||||
6,11=xVert. Speed
|
||||
color=639AFF
|
||||
7,11=Vm/s
|
||||
#Row 4
|
||||
color=99004A
|
||||
9,0=xAltitude
|
||||
color=FF007B
|
||||
10,0=A
|
||||
color=99004A
|
||||
9,11=xBearing
|
||||
color=FF007B
|
||||
10,11=GB
|
||||
#Row 5
|
||||
color=06998E
|
||||
12,0=xRSSI
|
||||
color=0AFFEF
|
||||
13,0=R
|
||||
color=06998E
|
||||
12,11=xHistory
|
||||
color=0AFFEF
|
||||
13.5,11=Q4
|
||||
#Footer
|
||||
color=6C757D
|
||||
15,0=xDecode Mode / General View
|
||||
15,18=bVV
|
||||
|
||||
############
|
||||
@Decode/Battery.TFT.Bazjo
|
||||
timer=-1,-1,N
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,#
|
||||
scale=11,10
|
||||
fonts=0,2
|
||||
#Row 1
|
||||
color=99001F
|
||||
0,0=xBattery Status
|
||||
0,11=xBattery Voltage
|
||||
color=FF0035
|
||||
1,0=BS
|
||||
1,11=BVV
|
||||
#Row 2
|
||||
color=99001F
|
||||
3,0=xCharge Current
|
||||
3,11=xDischarge Current
|
||||
color=FF0035
|
||||
4,0=BCmA
|
||||
4,11=BDmA
|
||||
#Row 3
|
||||
color=99001F
|
||||
6,0=xUSB Voltage
|
||||
6,11=xUSB Current
|
||||
color=FF0035
|
||||
7,0=BUV
|
||||
7,11=BImA
|
||||
#Row 4
|
||||
color=99001F
|
||||
9,0=xIC Temperature
|
||||
#9,11=xKey
|
||||
color=FF0035
|
||||
10,0=BTC
|
||||
#10,11=XValue
|
||||
#Row 5
|
||||
#12,0=xKey
|
||||
#12,11=xKey
|
||||
#13,0=XValue
|
||||
#13,11=XValue
|
||||
#Footer
|
||||
color=99001F
|
||||
15,0=xDecode Mode/Battery View
|
||||
15,18=bVV
|
||||
|
||||
# based on https://github.com/puspis/rdz_ttgo_sonde
|
||||
##########
|
||||
@Scanner.Puspis
|
||||
timer=-1,0,4
|
||||
key1action=D,#,F,W
|
||||
key2action=D,#,#,#
|
||||
timeaction=#,D,+
|
||||
scale=13,10
|
||||
fonts=0,1
|
||||
#Row 1
|
||||
color=90EE90
|
||||
0.5,3=XFREQUENCY SCAN
|
||||
#Row 2
|
||||
color=00FF00
|
||||
3,0=xMEMORY
|
||||
3,9=xLAUNCH SITE
|
||||
color=639AFF
|
||||
4,0,9=S/
|
||||
4,9=S
|
||||
#Row 3
|
||||
color=00FF00
|
||||
6,0=xTYPE
|
||||
6,9=xFREQUENCY
|
||||
color=639AFF
|
||||
7,0,9=T
|
||||
7,9=F MHz
|
||||
#Row 4
|
||||
fonts=0,5
|
||||
color=285454
|
||||
11.5,0=xIP ADDRESS:
|
||||
10.9,7,-15=N
|
||||
#Footer
|
||||
color=FF0000
|
||||
12.7,18=bVV
|
||||
|
||||
############
|
||||
@Main.Puspis
|
||||
timer=-1,-1,N
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,0
|
||||
scale=11,10
|
||||
fonts=0,2
|
||||
#Row 1
|
||||
color=00FF00
|
||||
0,0=xSONDE ID
|
||||
0,11=xFREQUENCY
|
||||
color=90EE90
|
||||
0,7.4=t
|
||||
1,0=Is
|
||||
1,11=F
|
||||
#Row 2
|
||||
fonts=0,1
|
||||
color=00FF00
|
||||
3,0=xLATITUDE
|
||||
3,11=xLONGITUDE
|
||||
color=FF007B
|
||||
4,0=L
|
||||
4,11=O
|
||||
#Row 3
|
||||
color=00FF00
|
||||
6,0=xWIND SPEED
|
||||
6,11=xCLIMB RATE
|
||||
color=639AFF
|
||||
7,0=Hkkm/h
|
||||
7,11=Vm/s
|
||||
#Row 4
|
||||
color=00FF00
|
||||
9,0=xRX ALTITUDE
|
||||
9,11=xSONDE ALTITUDE
|
||||
color=639AFF
|
||||
10,0=GH
|
||||
10,11=A
|
||||
#Row 5
|
||||
color=00FF00
|
||||
12,0=xDISTANCE
|
||||
12,11=xFRAMES
|
||||
color=FFFFFF
|
||||
13,0=GD
|
||||
13.5,11=Q4
|
||||
#Footer
|
||||
color=FF0000
|
||||
15,0.2=xIP:
|
||||
15,2.5=n
|
||||
15,18=bVV
|
||||
|
||||
############
|
||||
@JotaEme.Puspis
|
||||
timer=-1,-1,N
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,0
|
||||
scale=11,10
|
||||
fonts=0,1
|
||||
#Row 1
|
||||
color=90EE90
|
||||
0,0=Is
|
||||
0.7,10.5=t
|
||||
0,14=F
|
||||
#Row 2
|
||||
color=00FF00
|
||||
2,1.2=xWIND SPEED
|
||||
2,14=xCLIMB RATE
|
||||
color=639AFF
|
||||
3,1=Hkkm/h
|
||||
3,13=Vm/s
|
||||
#Row 3
|
||||
color=00FF00
|
||||
5,1=xRX ALTITUDE
|
||||
5,12.5=xSONDE ALTITUDE
|
||||
color=639AFF
|
||||
6,2=GH
|
||||
6,14=A
|
||||
#Row 4
|
||||
color=00FF00
|
||||
8,0=xSONDE POSITION
|
||||
color=FF007B
|
||||
9,2=l
|
||||
10,2=o
|
||||
#Row 5
|
||||
color=00FF00
|
||||
11.4,2=xDISTANCE
|
||||
color=FFFFFF
|
||||
12.4,1.5=GD
|
||||
#Circle
|
||||
color=EEAA00,000033
|
||||
8,13.8=g0CCS,28,FFFF00,000033,5,9ACD32,5,EEAA00
|
||||
#Footer
|
||||
color=FF0000
|
||||
15,0=n
|
||||
color=FFFFFF,000000
|
||||
15,8.7=Q4
|
||||
color=FF0000
|
||||
15,18.4=bVV
|
||||
|
||||
############
|
||||
@CompassTFT.Puspis
|
||||
timer=-1,-1,N
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,#
|
||||
scale=13,10
|
||||
fonts=0,1
|
||||
#Row 1
|
||||
color=90EE90
|
||||
0.5,1.5=XCOMPASS
|
||||
#Row 2
|
||||
color=00FF00
|
||||
4,2=xRX HEADING
|
||||
color=639AFF
|
||||
5,3.8=GC
|
||||
#Row 3
|
||||
color=00FF00
|
||||
9.5,3=xDISTANCE
|
||||
9.5,13.5=xBEARING
|
||||
color=639AFF
|
||||
10.5,3.4=GD
|
||||
10.5,14.3=GI
|
||||
#Circle
|
||||
color=EEAA00,000033
|
||||
0.2,10=g0CCS,52,FFFF00,000033,10,9ACD32,6,EEAA00
|
||||
#Footer
|
||||
color=FF0000,000000
|
||||
12.7,1=Q4
|
||||
12.7,18=bVV
|
||||
|
||||
############
|
||||
@GPSdataTFT.Puspis
|
||||
timer=-1,-1,N
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,#
|
||||
scale=13,10
|
||||
fonts=0,1
|
||||
#Row 1
|
||||
color=90EE90
|
||||
0.5,0.5=XGPS RECEIVER STATION
|
||||
#Row 2
|
||||
color=00FF00
|
||||
3,0=xRX LATITUDE
|
||||
3,12=xRX LONGITUDE
|
||||
color=639AFF
|
||||
4,0=GA
|
||||
4,12=GO
|
||||
#Row 3
|
||||
color=00FF00
|
||||
6,0=xRX ALTITUDE
|
||||
6,12=xRX HEADING
|
||||
color=639AFF
|
||||
7,0=GH
|
||||
7,12=GC
|
||||
#Row 4
|
||||
color=00FF00
|
||||
9,0=xDISTANCE
|
||||
9,12=xBEARING
|
||||
color=639AFF
|
||||
10,0=GD
|
||||
10,12=GB
|
||||
#Footer
|
||||
color=FF0000,000000
|
||||
12.7,0.4=Q4
|
||||
12.7,18=bVV
|
||||
|
||||
############
|
||||
@BatteryTFT.Puspis
|
||||
timer=-1,-1,-1
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,#
|
||||
scale=13,10
|
||||
fonts=0,1
|
||||
#Row 1
|
||||
color=90EE90
|
||||
0.5,4=XBATTERY STATUS
|
||||
#Row 2
|
||||
color=00FF00
|
||||
3,0=x(C)HARGE/(B)ATT
|
||||
3,11.5=xBATTERY VOLTAGE
|
||||
color=639AFF
|
||||
4,4=BS
|
||||
4,11.5=BVV
|
||||
#Row 3
|
||||
color=00FF00
|
||||
6,0=xCHARGE CURRENT
|
||||
6,11.5=xDISCHG. CURRENT
|
||||
color=639AFF
|
||||
7,0=BCmA
|
||||
7,11.5=BDmA
|
||||
#Row 3
|
||||
color=00FF00
|
||||
9,0=xIC TEMPERATURE
|
||||
9,11.5=xFREQ. OFFSET
|
||||
color=639AFF
|
||||
10,0=BTC
|
||||
10,10=C
|
||||
#Footer
|
||||
color=FF0000,000000
|
||||
12.7,0.4=Q4
|
||||
12.7,18=bVV
|
||||
|
|
@ -0,0 +1,217 @@
|
|||
## screens3.txt: TFT display (portrait)
|
||||
## based on http://www.p1337.synology.me/dokuwiki/doku.php?id=public:wettersonden
|
||||
# Definition of display content and action behaviour
|
||||
#
|
||||
# Timer: (view timer, rx timer, norx timer)
|
||||
# - value -1: timer is disabled; value>=0: timer fires after (value) seconds
|
||||
# - view timer: time since current view (display mode and sonde) was started
|
||||
# - rx timer: time since when sonde data has been received continuously (trigger immediatly after RX)
|
||||
# - norx timer: time since when no sonde data has been received continuously
|
||||
# (rx and norx timer is started after tuning a new frequency and receiving a signal or not receiving
|
||||
# anything for a 1s period)
|
||||
#
|
||||
# Actions:
|
||||
# - W: activate WiFi scan
|
||||
# - F: activate frequency spectrum display
|
||||
# - 0: activate "Scan:" display (this is basically just display mode 0)
|
||||
# - x: (1..N): activate display mode x [deprecated]
|
||||
# - >: activate next display mode
|
||||
# - D: activate default receiver display (display mode specified in config)
|
||||
# - +: advance to next active sonde from QRG config
|
||||
# - #: no action
|
||||
#
|
||||
# Display content (lower/upper case: small/large font)
|
||||
# line,column=content
|
||||
# for ILI9225 its also possible to indicate
|
||||
# line,column,width=content for text within a box of width 'width'
|
||||
# line,column,-width=content for right-justified text
|
||||
#
|
||||
# XText : Text
|
||||
# F(suffix): frequency (with suffix, e.g., " MHz")
|
||||
# L latitade
|
||||
# O lOngitute
|
||||
# A altitude
|
||||
# Hm(suffix) hor. speed m/s (suffix: e.g. "m/s"; no suffix=>m/s as 16x8 bitmap for SSD1306 display only)
|
||||
# Hk(suffix) hor. speed km/h (suffix: e.g. "km/h"; no suffix=>km/h as 16x8 bitmap for SSD1306 display only)
|
||||
# V(suffix) vert. speef (suffix: e.g. "m/s"; no suffix=>m/s as 16x8 bitmap for SSD1306 display only)
|
||||
# Ix sonde ID (default/d: dxlaprs; s: short id, n: real serial number)
|
||||
# RS41,RS92: all identical R1234567
|
||||
# DFMx: ID M12345678; short ID and serial 12345678
|
||||
# M10: ID ME95231F0; short ID: M95231F0; serial 9062104592
|
||||
# Q signal quality statistics bar
|
||||
# T type string (RS41/DFM9/DFM6/RS92)
|
||||
# C afC value
|
||||
# N ip address (only tiny font)
|
||||
# S scan list entry info: l/empty: launch site name, #=entry nr, t=total entries, a=active entries, /: #/t
|
||||
# K RS41 kill timer values: Kl launch timer, Kb burst timer, Kc kill countdown
|
||||
# format: K_4: h:mm k_6: h:mm:ss k_s: sssss, nothing shown for other sonde
|
||||
# Mx telemetry value x (t temp p preassure h hyg) [not yet implemented, maybe some day in future]
|
||||
# Gx GPS-related data
|
||||
# raw data from GPS: GA, GO, GH, GC: LAtitude, lOngitude, Altutide(Height), Course over ground
|
||||
# relative to sonde: GD, GI, GB: Distance, dIrection (absolute), relative Bearing
|
||||
# G0 GPS circle diagram e.g. 3,5=g0NCS,50,ff0000,000033,5,ffff00,4,ffffff
|
||||
# "N" (what is on top: N=north C=course)
|
||||
# "C" (where does the arrow point to: C=course, S=sonde)
|
||||
# "S" (what is shown by the bullet: C=course, S=sonde)
|
||||
# 50: circle radius, followed by fg and bg color
|
||||
# 5: bullet radius, followed by fg color
|
||||
# 4: arrow width, followed by fg color
|
||||
# R RSSI
|
||||
# B battery(T-Beam 1.0) S=status V=Batt.Volt C=charge current D=discharge current
|
||||
# U=USB volt I=USB current T=IC temp
|
||||
#
|
||||
# fonts=x,y can be used to select font (x=small, y=large) for all items below
|
||||
# for SSD1306, x and y can be used to select one of those fonts:
|
||||
# (y should be a 1x2 font (1,5,6,7), x a small font)
|
||||
# u8x8_font_chroma48medium8_r, // 0 ** default small
|
||||
# u8x8_font_7x14_1x2_f, // 1 ** default large
|
||||
# u8x8_font_amstrad_cpc_extended_f, // 2
|
||||
# u8x8_font_5x7_f, // 3
|
||||
# u8x8_font_5x8_f, // 4
|
||||
# u8x8_font_8x13_1x2_f, // 5
|
||||
# u8x8_font_8x13B_1x2_f, // 6
|
||||
# u8x8_font_7x14B_1x2_f, // 7
|
||||
# u8x8_font_artossans8_r, // 8
|
||||
# u8x8_font_artosserif8_r, // 9
|
||||
# u8x8_font_torussansbold8_r, // 10
|
||||
# u8x8_font_victoriabold8_r, // 11
|
||||
# u8x8_font_victoriamedium8_r, // 12
|
||||
# u8x8_font_pressstart2p_f, // 13
|
||||
# u8x8_font_pcsenior_f, // 14
|
||||
# u8x8_font_pxplusibmcgathin_f, // 15
|
||||
# u8x8_font_pxplusibmcga_f, // 16
|
||||
# u8x8_font_pxplustandynewtv_f, // 17
|
||||
#
|
||||
# for ILI9225, these fonts are available:
|
||||
# Terminal6x8 // 0
|
||||
# Terminal11x16 // 1
|
||||
# Terminal12x16 // 2
|
||||
# FreeMono9pt7b, // 3
|
||||
# FreeMono12pt7b, // 4
|
||||
# FreeSans9pt7b, // 5
|
||||
# FreeSans12pt7b, // 6
|
||||
# Picopixel, // 7
|
||||
#
|
||||
# color=rrggbb,rrggbb can be used to select color (foreground, background)
|
||||
# see https://github.com/Nkawu/TFT_22_ILI9225/wiki#color-reference for example (use without "#"-sign)
|
||||
#
|
||||
# for TFT display, coordinates and width are multiplied by xscale,yscale and later used in pixels
|
||||
# with scale=1,1 you can directly use pixel coordinates. (default: xscale=13,yscale=22 => 8 lines, 16 columns)
|
||||
|
||||
###########
|
||||
#
|
||||
# Default configuration for "Scanner" display:
|
||||
# - view timer disabled; rx timer=0; norx timer = 0
|
||||
# => after 1 second immediately an action is triggered
|
||||
# (norx: go to next sonde; rx: go to default receiver display)
|
||||
# - key1 actions: D,0,F,W
|
||||
# => Button press activates default receiver view, double press does nothing
|
||||
# Mid press activates Spectrum display, long press activates Wifi scan
|
||||
# - key2 has no function
|
||||
@ScannerPortrait
|
||||
timer=-1,0,0
|
||||
key1action=D,#,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,D,+
|
||||
0,0=XScan
|
||||
0,5=S#:
|
||||
0,9,4.5=T
|
||||
6,0=XHoehe
|
||||
6,5=GH
|
||||
color=ffff00
|
||||
2,0=F MHz
|
||||
4,0=S
|
||||
color=00ff00,444444
|
||||
7,5=n
|
||||
7,0=bV
|
||||
|
||||
############
|
||||
# Default configuration for "Legacy" display:
|
||||
# - view timer=-1, rx timer=-1 (disabled); norx timer=20 (or -1 for "old" behaviour)
|
||||
# => norx timer fires after not receiving a singla for 20 seconds
|
||||
# - key1 actions: +,0,F,W
|
||||
# => Button1 press: next sonde; double press => @Scanner display
|
||||
# => Mid press activates Spectrum display, long press activates Wifi scan
|
||||
# - key2 actions: 2,#,#,#
|
||||
# => BUtton2 activates display 2 (@Field)
|
||||
# - timer actions: #,#,0
|
||||
# (norx timer: if no signal for >20 seconds: go back to scanner mode)
|
||||
#
|
||||
@LegacyPortrait
|
||||
timer=-1,-1,N
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,0
|
||||
9,10=f
|
||||
9,0=r
|
||||
9,4=Q
|
||||
5,0=g0NCS,35,ffff00,000044,6,33ff33,5,eeaa00
|
||||
5,7=g0CCS,35,ffff00,000044,6,55ff55,5,eeaa00
|
||||
0,0=s
|
||||
0,9=is
|
||||
2,0=L
|
||||
3,0=O
|
||||
color=FFFF00
|
||||
1,6=Hk km/h
|
||||
color=FF0000
|
||||
1,0=GD
|
||||
color=FFFFFF
|
||||
4,9=GH
|
||||
3,9=V
|
||||
4,0=A
|
||||
|
||||
############
|
||||
@PeilungTFTPortrait
|
||||
timer=-1,-1,N
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,#
|
||||
color=ffff00,000033
|
||||
color=bbbbbb,000000
|
||||
0,2=xN Top:
|
||||
0,8=xCourse Top:
|
||||
color=ffff00,000033
|
||||
1,0=g0NCS,35,ffff00,000044,6,33ff33,5,eeaa00
|
||||
1,7=g0CCS,35,ffff00,000044,6,55ff55,5,eeaa00
|
||||
color=ffffff,000000
|
||||
6,0=xDirection:
|
||||
6,8,4=gI
|
||||
7,0=xCOG:
|
||||
7,4,4=gC
|
||||
7,8=xturn:
|
||||
7,12,4=gB
|
||||
|
||||
############
|
||||
@GPSdataTFTPortrait
|
||||
timer=-1,-1,N
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,#
|
||||
0,0=xOn-board GPS:
|
||||
1,0,8=gA
|
||||
2,0,8=gO
|
||||
3,0,8=gH
|
||||
4,0,8=gC
|
||||
5,0=xGPS vs Sonde:
|
||||
6,0,8=gD
|
||||
7,0,8=gI
|
||||
7,8,8=gB
|
||||
|
||||
############
|
||||
@BatteryTFTPortrait
|
||||
timer=-1,-1,-1
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,#
|
||||
0,0=xBattery status:
|
||||
0,14=bS
|
||||
1,0=xBatt:
|
||||
1,5,5=bVV
|
||||
2,0,16=bCmA(charging)
|
||||
3,0,16=bDmA(discharging)
|
||||
4.4,0=xUSB:
|
||||
4.4,5,5=bUV
|
||||
5.4,0,10=bImA
|
||||
6.4,0=xTemp:
|
||||
6.4,5,5=bT C
|
||||
|
||||
|
|
@ -312,14 +312,8 @@ void U8x8Display::drawQS(uint8_t x, uint8_t y, uint8_t len, uint8_t /*size*/, ui
|
|||
|
||||
|
||||
const GFXfont *gfl[] = {
|
||||
#ifdef ALT9225
|
||||
&Terminal11x16Font, // 3 (replacement for 1 or 2 with old library)
|
||||
&Terminal11x16Font, // 4 (replacement for 1 or 2 with old library)
|
||||
#else
|
||||
// nobody was using them, so removed with new library
|
||||
&FreeMono9pt7b, // 3
|
||||
&FreeMono12pt7b, // 4
|
||||
#endif
|
||||
&FreeSans9pt7b, // 5
|
||||
&FreeSans12pt7b, // 6
|
||||
&Picopixel, // 7
|
||||
|
|
@ -331,13 +325,8 @@ struct gfxoffset_t {
|
|||
// first value: offset: max offset from font glyphs (last column * (-1)) (check /, \, `, $)`
|
||||
// yclear:max height: max of (height in 3rd column) + (yofs + 6th column) (check j)
|
||||
const struct gfxoffset_t gfxoffsets[]={
|
||||
#ifdef ALT9225
|
||||
{ 16, 18},
|
||||
{ 16, 18},
|
||||
#else
|
||||
{ 11, 15 }, // 13+11-9 "j"
|
||||
{ 15, 20 }, // 19+15-14
|
||||
#endif
|
||||
{ 13, 18 }, // 17+13-12 "j"
|
||||
{ 17, 23 }, // 23+17-17
|
||||
{ 4, 6}, // 6+4-4
|
||||
|
|
@ -348,55 +337,36 @@ static int ngfx = sizeof(gfl)/sizeof(GFXfont *);
|
|||
#define TFT_LED 0 // 0 if wired to +5V directly
|
||||
#define TFT_BRIGHTNESS 100 // Initial brightness of TFT backlight (optional)
|
||||
|
||||
#ifdef ALT9225
|
||||
Arduino_DataBus *bus;
|
||||
#endif
|
||||
|
||||
void ILI9225Display::begin() {
|
||||
#ifdef ALT9225
|
||||
Serial.println("ILI9225 init (alt driver)");
|
||||
bus = new Arduino_ESP32SPI( sonde.config.tft_rs, sonde.config.tft_cs,
|
||||
sonde.config.oled_scl, sonde.config.oled_sda, -1, HSPI);
|
||||
tft = new Arduino_ILI9225(bus, sonde.config.oled_rst);
|
||||
if(_type == 3)
|
||||
tft = new Arduino_ILI9341(bus, sonde.config.oled_rst);
|
||||
else
|
||||
tft = new Arduino_ILI9225(bus, sonde.config.oled_rst);
|
||||
Serial.println("ILI9225 init (alt driver): done");
|
||||
tft->begin();
|
||||
tft->fillScreen(BLACK);
|
||||
tft->setRotation(sonde.config.tft_orient);
|
||||
tft->setTextWrap(false);
|
||||
#else
|
||||
tft = new MY_ILI9225(sonde.config.oled_rst, sonde.config.tft_rs, sonde.config.tft_cs,
|
||||
sonde.config.oled_sda, sonde.config.oled_scl, TFT_LED, TFT_BRIGHTNESS);
|
||||
tft->setModeFlip(sonde.config.tft_modeflip);
|
||||
tft->begin(spiDisp);
|
||||
tft->setOrientation(sonde.config.tft_orient);
|
||||
#endif
|
||||
}
|
||||
|
||||
void ILI9225Display::clear() {
|
||||
#ifdef ALT9225
|
||||
tft->fillScreen(0);
|
||||
#else
|
||||
tft->clear();
|
||||
#endif
|
||||
tft->fillScreen(BLACK);
|
||||
}
|
||||
|
||||
// for now, 0=small=FreeSans9pt7b, 1=large=FreeSans18pt7b
|
||||
void ILI9225Display::setFont(uint8_t fontindex) {
|
||||
#ifdef ALT9225
|
||||
if(fontindex==1 || fontindex==2) { fontindex=3; }
|
||||
#endif
|
||||
findex = fontindex;
|
||||
switch(fontindex) {
|
||||
#ifdef ALT9225
|
||||
case 0: tft->setFont(NULL); tft->setTextSize(1); break;
|
||||
case 1: tft->setFont(NULL); tft->setTextSize(2); break;
|
||||
case 2: tft->setFont(NULL); tft->setTextSize(2); break;
|
||||
default: tft->setFont(gfl[fontindex-3]);
|
||||
#else
|
||||
case 0: tft->setFont(Terminal6x8); break;
|
||||
case 1: tft->setFont(Terminal11x16); break;
|
||||
case 2: tft->setFont(Terminal12x16); break;
|
||||
default: tft->setGFXFont(gfl[fontindex-3]);
|
||||
#endif
|
||||
}
|
||||
}
|
||||
|
||||
|
|
@ -418,7 +388,6 @@ void ILI9225Display::getDispSize(uint8_t *height, uint8_t *width, uint8_t *lines
|
|||
break;
|
||||
default: // get size from GFX Font
|
||||
{
|
||||
#ifdef ALT9225
|
||||
int16_t x, y;
|
||||
uint16_t w, h;
|
||||
tft->getTextBounds("|", 0, 0, &x, &y, &w, &h);
|
||||
|
|
@ -426,13 +395,6 @@ void ILI9225Display::getDispSize(uint8_t *height, uint8_t *width, uint8_t *lines
|
|||
tft->getTextBounds("A", 0, 0, &x, &y, &w, &h);
|
||||
if(colskip) *colskip = w+2;
|
||||
if(lineskip&&colskip) { Serial.printf("skip size from bounds: %d, %d\n", *lineskip, *colskip); }
|
||||
#else
|
||||
int16_t w,h,a;
|
||||
tft->getGFXCharExtent('|',&w,&h,&a);
|
||||
if(lineskip) *lineskip = h+2;
|
||||
tft->getGFXCharExtent('A',&w,&h,&a);
|
||||
if(colskip) *colskip = w+2; // just an approximation
|
||||
#endif
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -449,15 +411,10 @@ void ILI9225Display::drawString(uint8_t x, uint8_t y, const char *s, int16_t wid
|
|||
// Standard font
|
||||
if(findex<3) {
|
||||
DebugPrintf(DEBUG_DISPLAY, "Simple Text %s at %d,%d [%d]\n", s, x, y, width);
|
||||
#ifdef ALT9225
|
||||
// for gpx fonts and new library, cursor is at baseline!!
|
||||
int h = 6; if(findex>1) h=12;
|
||||
#else
|
||||
tft->setBackgroundColor(bg);
|
||||
int h = tft->getFont().height;
|
||||
#endif
|
||||
if( alignright ) {
|
||||
#ifdef ALT9225
|
||||
#if 1
|
||||
//w = tft->getTextWidth(s);
|
||||
/// TODO
|
||||
if( width==WIDTH_AUTO ) { width = w; }
|
||||
|
|
@ -476,7 +433,6 @@ void ILI9225Display::drawString(uint8_t x, uint8_t y, const char *s, int16_t wid
|
|||
tft->drawText(x + width - w, y, s, fg);
|
||||
#endif
|
||||
} else {
|
||||
#ifdef ALT9225
|
||||
tft->setCursor(x, y);
|
||||
tft->setTextColor(fg, bg);
|
||||
tft->print(s);
|
||||
|
|
@ -486,25 +442,14 @@ void ILI9225Display::drawString(uint8_t x, uint8_t y, const char *s, int16_t wid
|
|||
//if(curx < x + width) {
|
||||
// tft->fillRectangle(curx, y, x + width - 1, y + h - 1, bg);
|
||||
//}
|
||||
#else
|
||||
int curx = tft->drawText(x, y, s, fg);
|
||||
if( width==WIDTH_AUTO ) { return; }
|
||||
if(curx < x + width) {
|
||||
tft->fillRectangle(curx, y, x + width - 1, y + h - 1, bg);
|
||||
}
|
||||
#endif
|
||||
}
|
||||
return;
|
||||
}
|
||||
// GFX font
|
||||
int16_t x1, y1;
|
||||
if(1||width==WIDTH_AUTO || alignright) {
|
||||
#ifdef ALT9225
|
||||
tft->getTextBounds(s, x, y + gfxoffsets[findex-3].yofs, &x1, &y1, (uint16_t *)&w, (uint16_t *)&h);
|
||||
w += x1 - x + 1;
|
||||
#else
|
||||
tft->getGFXTextExtent(s, x, y + gfxoffsets[findex-3].yofs, &w, &h);
|
||||
#endif
|
||||
if(width==WIDTH_AUTO) { width=w; }
|
||||
if(alignright) {
|
||||
if(w > width) {
|
||||
|
|
@ -530,7 +475,7 @@ void ILI9225Display::drawString(uint8_t x, uint8_t y, const char *s, int16_t wid
|
|||
}
|
||||
#else
|
||||
// Text by drawing bitmap.... => less "flicker"
|
||||
#ifdef ALT9225
|
||||
#if 1
|
||||
//TODO
|
||||
tft->setCursor( alignright? x+width-w : x, y + gfxoffsets[findex-3].yofs);
|
||||
tft->setTextColor( fg, bg );
|
||||
|
|
@ -571,7 +516,6 @@ void ILI9225Display::drawString(uint8_t x, uint8_t y, const char *s, int16_t wid
|
|||
}
|
||||
|
||||
void ILI9225Display::drawTile(uint8_t x, uint8_t y, uint8_t cnt, uint8_t *tile_ptr) {
|
||||
#ifdef ALT9225
|
||||
int i,j;
|
||||
tft->startWrite();
|
||||
for(i=0; i<cnt*8; i++) {
|
||||
|
|
@ -582,9 +526,6 @@ void ILI9225Display::drawTile(uint8_t x, uint8_t y, uint8_t cnt, uint8_t *tile_p
|
|||
}
|
||||
}
|
||||
tft->endWrite();
|
||||
#else
|
||||
tft->drawTile(x, y, cnt, tile_ptr);
|
||||
#endif
|
||||
#if 0
|
||||
int i,j;
|
||||
tft->startWrite();
|
||||
|
|
@ -609,19 +550,11 @@ void ILI9225Display::drawTriangle(uint16_t x1, uint16_t y1, uint16_t x2, uint16_
|
|||
}
|
||||
|
||||
void ILI9225Display::drawBitmap(uint16_t x1, uint16_t y1, const uint16_t* bitmap, int16_t w, int16_t h) {
|
||||
#ifdef ALT9225
|
||||
tft->draw16bitRGBBitmap(x1, y1, bitmap, w, h);
|
||||
#else
|
||||
tft->drawBitmap(x1, y1, bitmap, w, h);
|
||||
#endif
|
||||
}
|
||||
|
||||
void ILI9225Display::welcome() {
|
||||
#ifdef ALT9225
|
||||
tft->fillScreen(0);
|
||||
#else
|
||||
tft->clear();
|
||||
#endif
|
||||
setFont(6);
|
||||
drawString(0, 0*22, version_name, WIDTH_AUTO, 0xff00);
|
||||
setFont(5);
|
||||
|
|
@ -669,8 +602,9 @@ void ILI9225Display::drawQS(uint8_t x, uint8_t y, uint8_t len, uint8_t size, uin
|
|||
#define pgm_read_pointer(addr) ((void *)pgm_read_dword(addr))
|
||||
|
||||
|
||||
#ifdef ALT9225
|
||||
#if 1
|
||||
#else
|
||||
// TO BE REMOVED
|
||||
void MY_ILI9225::drawTile(uint8_t x, uint8_t y, uint8_t cnt, uint8_t *tile_ptr) {
|
||||
int i,j;
|
||||
startWrite();
|
||||
|
|
@ -731,8 +665,8 @@ RawDisplay *Display::rdis = NULL;
|
|||
//TODO: maybe merge with initFromFile later?
|
||||
void Display::init() {
|
||||
Serial.printf("disptype is %d\n",sonde.config.disptype);
|
||||
if(sonde.config.disptype==1) {
|
||||
rdis = new ILI9225Display();
|
||||
if(sonde.config.disptype==1 || sonde.config.disptype==3) {
|
||||
rdis = new ILI9225Display(sonde.config.disptype);
|
||||
} else {
|
||||
rdis = new U8x8Display(sonde.config.disptype);
|
||||
}
|
||||
|
|
@ -741,6 +675,8 @@ void Display::init() {
|
|||
delay(100);
|
||||
Serial.println("Display initialized");
|
||||
rdis->clear();
|
||||
delay(3000);
|
||||
Serial.println("Cleared");
|
||||
}
|
||||
|
||||
|
||||
|
|
@ -1086,7 +1022,7 @@ void Display::initFromFile(int index) {
|
|||
char text[61];
|
||||
n=sscanf(s, "%f,%f,%f", &y, &x, &w);
|
||||
sscanf(ptr+1, "%60[^\r\n]", text);
|
||||
if(sonde.config.disptype==1) { x*=xscale; y*=yscale; w*=xscale; }
|
||||
if(sonde.config.disptype==1 || sonde.config.disptype==3) { x*=xscale; y*=yscale; w*=xscale; }
|
||||
newlayouts[idx].de[what].x = x;
|
||||
newlayouts[idx].de[what].y = y;
|
||||
newlayouts[idx].de[what].width = n>2 ? w : WIDTH_AUTO;
|
||||
|
|
@ -1538,7 +1474,8 @@ void Display::drawGPS(DispEntry *de) {
|
|||
}
|
||||
Serial.printf("GPS0: %c%c%c N=%d, A=%d, B=%d\n", circinfo->top, circinfo->arr, circinfo->bul, angN, angA, angB);
|
||||
// "N" in direction angN
|
||||
#ifdef ALT9225
|
||||
#if 1
|
||||
// TODO
|
||||
#else
|
||||
static_cast<ILI9225Display *>(rdis)->tft->drawGFXcharBM(x0 + circinfo->radius*sin(angN*PI/180)-6, y0 - circinfo->radius*cos(angN*PI/180)+7, 'N', 0xffff, bitmap, size, size);
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -1,5 +1,3 @@
|
|||
#define ALT9225
|
||||
|
||||
#ifndef Display_h
|
||||
#define Display_h
|
||||
|
||||
|
|
@ -7,11 +5,7 @@
|
|||
#define FONT_SMALL 0
|
||||
|
||||
#include <SPI.h>
|
||||
#ifdef ALT9225
|
||||
#include <Arduino_GFX_Library.h>
|
||||
#else
|
||||
#include <TFT22_ILI9225.h>
|
||||
#endif
|
||||
#include <U8x8lib.h>
|
||||
#include <SPIFFS.h>
|
||||
|
||||
|
|
@ -81,12 +75,12 @@ public:
|
|||
class U8x8Display : public RawDisplay {
|
||||
private:
|
||||
U8X8 *u8x8 = NULL; // initialize later after reading config file
|
||||
int _type;
|
||||
uint8_t _type;
|
||||
const uint8_t **fontlist;
|
||||
int nfonts;
|
||||
|
||||
public:
|
||||
U8x8Display(int type = 0) { _type = type; }
|
||||
U8x8Display(uint8_t type = 0) { _type = type; }
|
||||
void begin();
|
||||
void clear();
|
||||
void setFont(uint8_t fontindex);
|
||||
|
|
@ -100,24 +94,17 @@ public:
|
|||
void drawQS(uint8_t x, uint8_t y, uint8_t len, uint8_t size, uint8_t *stat, uint16_t fg=0xffff, uint16_t bg=0);
|
||||
};
|
||||
|
||||
#ifdef ALT9225
|
||||
typedef Arduino_GFX MY_ILI9225;
|
||||
#else
|
||||
class MY_ILI9225 : public TFT22_ILI9225 {
|
||||
using TFT22_ILI9225::TFT22_ILI9225;
|
||||
public:
|
||||
uint16_t drawGFXChar(int16_t x, int16_t y, unsigned char c, uint16_t color);
|
||||
void drawTile(uint8_t x, uint8_t y, uint8_t cnt, uint8_t *tile_ptr);
|
||||
};
|
||||
#endif
|
||||
typedef Arduino_GFX MY_ILI9225;
|
||||
|
||||
class ILI9225Display : public RawDisplay {
|
||||
private:
|
||||
uint8_t yofs=0;
|
||||
uint8_t findex=0;
|
||||
uint8_t _type;
|
||||
|
||||
public:
|
||||
MY_ILI9225 *tft = NULL; // initialize later after reading config file
|
||||
ILI9225Display(int type = 1) { _type = type; }
|
||||
void begin();
|
||||
void clear();
|
||||
void setFont(uint8_t fontindex);
|
||||
|
|
|
|||
Ładowanie…
Reference in New Issue