kopia lustrzana https://github.com/projecthorus/radiosonde_auto_rx
0b093ef886 | ||
---|---|---|
auto_rx | ||
c34 | ||
demod | ||
dfm | ||
dropsonde | ||
ecc | ||
imet | ||
iq | ||
lms6 | ||
m10 | ||
meisei | ||
mk2a | ||
rs41 | ||
rs92 | ||
rs_module | ||
scan | ||
.gitignore | ||
README.md |
README.md
Automatic Radiosonde Receiver Utilities
This fork of rs1279's RS codebase provides a set of utilities ('auto_rx') to allow automatic reception and uploading of Radiosonde positions to multiple services, including:
- The Habitat High-Altitude Balloon Tracker
- APRS-IS (for display on sites such as aprs.fi
- OziPlotter, for mobile radiosonde chasing.
Currently we support the following radiosonde types:
- Vaisala RS92SGP
- Vaisala RS41SGP
Support for other radiosondes may be added as required (send us sondes to test with!)
This software performs the following steps:
- Use rtl_power to scan across a user-defined frequency range, and detect peaks in the spectrum.
- For each detected peak frequency, run the rs_detect utility, which determines if a radiosonde signal is present, and what type it is.
- If a radiosonde signal is found, start demodulating it, and upload data to various internet services.
- If no peaks are found, or if no packets are heard from the radiosonde in a given amount of time (2 minutes by default), go back to step 1.
Refer to the wiki for installation and setup instructions.
Contacts
You can often find us in the #highaltitude IRC Channel on Freenode.