diff --git a/README.md b/README.md
index b3b0ce6..65529a8 100644
--- a/README.md
+++ b/README.md
@@ -1,113 +1,16 @@
-RS
-==
-
### Automatic Radiosonde RX Station Extensions ###
-This fork of rs1279's excellent RS codebase is intended to produce a set of utilities to allow automatic
-reception and uploading of radiosonde positions to APRS-IS and Habitat.
-Eventually I hope to have an automatic receive station installed at a strategic location in the
-Adelaide South Australia area, to better assist with gathering of RS41 radiosondes once they start being
-launched.
+This fork of [rs1279's RS](https://github.com/rs1729/RS) codebase provides a set of utilities ('auto_rx') to allow automatic reception and uploading of radiosonde positions to multiple services, including:
+* The [Habitat High-Altitude Balloon Tracker](https://tracker.habhub.org)
+* APRS-IS (for display on sites such as [aprs.fi](https://aprs.fi)
+* [OziPlotter](https://github.com/projecthorus/oziplotter), for mobile radiosonde chasing.
+
+Currently we support the following radiosonde types:
+* Vaisala RS92SGP
+* Vaisala RS41SGP
+Support for other radiosondes may be added as required (send us sondes to test with!)
The key changes from the RS master codebase are:
-* Modification of rs92gps and rs41 for easier output parsing
-* Addition of the auto_rx folder, containing automatic RX scripts
-
-## Installing on a pi
-
-Below are assuming running as root and installing to /root/radiosonde_auto_rx
-
-### Build auto_rx and deps
-```
-apt-get update
-apt-get install python-numpy python-crcmod sox rtl-sdr
-git clone https://github.com/projecthorus/radiosonde_auto_rx.git /root/radiosonde_auto_rx
-cd radiosonde_auto_rx/auto_rx
-./build.sh
-```
-
-### Configure auto_rx
-```
-cp station.cfg.example station.cfg
-nano station.cfg
-```
-
-### Blacklist Kernel Drivers
-```
-cat << EOF > /etc/modprobe.d/rtl-sdr-blacklist.conf
-blacklist dvb_usb_rtl28xxu
-blacklist e4000
-blacklist rtl2832
-blacklist dvb_usb_rtl2832u
-blacklist dvb_usb
-EOF
-```
-
-### Setup Systemd service file
-```
-cp auto_rx.service /etc/systemd/system/auto_rx.service
-systemctl enable auto_rx
-systemctl start auto_rx
-```
-
-### Watching the log
-```
-journalctl -u auto_rx.service -f -n 100
-```
-
-### Restarting or stopping the service
-```
-systemctl stop auto_rx
-systemctl start auto_rx
-```
-
-#### Wetterballon-Radiosonden 400-406 MHz
-
-* Decoder:
- (compile: `gcc -lm -o `)
-
- `RS/rs92`: RS92-SGP, RS92-AGP
- `RS/rs41`: RS41-SG(P)
- `RS/dropsonde`: RD94
- `RS/m10`: M10
- `RS/dfm`: DFM-06, DFM-09
- `RS/imet`: iMet-1-AB, iMet-1-RS
- `RS/c34`: C34, C50
- `RS/lms6`: LMS6
- `RS/mk2a`: MkIIa
- `RS/meisei`: Meisei
-
- `RS/rs_module`: separate Module, z.Z. RS92, RS41
-
-
- Die Decoder erwarten das FM-demodulierte wav-Audio des empfangenen Signals (kann auch mit
-sox gestreamt werden). Die weitere Demodulation ist sehr einfach gehalten (Nulldurchgaenge),
-so dass die Decodierung empfindlich auf Stoerungen reagiert und ein gutes Signal braucht.
-Oft hilft schon, z.B. mit sox einen lowpass-Filter zwischenzuschalten (fuer C34/C50 und iMet-1-RS
-wird DFT verwendet). Je nach Empfangsgeraet oder SDR-Software kann das Signal invertiert sein
-(ebenso fuer neuere DFM-09 gegenueber DFM-06).
-
- `RS/ecc` - error correction codes (Reed-Solomon/BCH)
-
-
-* Diverses:
-
- `RS/IQ`: Beispiele für Behandlung von IQ-Signalen
- `RS/scan`: einfaches Beispiel, wie man mit rtl_sdr-tools automatisch scannen kann
-
-
-* Videos & Bilder:
-
- https://www.youtube.com/user/boulderplex
- https://www.flickr.com/photos/116298535@N06/albums/72157644377585863
-
-
-* erläuternde Beiträge:
-
- http://www.fingers-welt.de/phpBB/viewtopic.php?f=14&t=43&start=525#p50955
- http://www.fingers-welt.de/phpBB/viewtopic.php?f=14&t=43&start=550#p64707
- http://www.fingers-welt.de/phpBB/viewtopic.php?f=14&t=43&start=700#p75202
- http://www.fingers-welt.de/phpBB/viewtopic.php?f=14&t=43&start=1000#p87987
- http://www.fingers-welt.de/phpBB/viewtopic.php?f=14&t=43&start=1000#p88325
- http://www.fingers-welt.de/phpBB/viewtopic.php?f=14&t=43&start=1000#p88845
- http://www.fingers-welt.de/phpBB/viewtopic.php?f=14&t=43&start=1850#p155677
+* Addition of the auto_rx directory, containing the auto_rx automatic reception software
+* Modifications to the rs92ecc and rs41ecc decoders, to provide telemetry output in JSON format.
+Refer to the wiki for [installation and setup instructions](https://github.com/projecthorus/radiosonde_auto_rx/wiki).
\ No newline at end of file
diff --git a/auto_rx/README.md b/auto_rx/README.md
index 363ba3c..65529a8 100644
--- a/auto_rx/README.md
+++ b/auto_rx/README.md
@@ -1,50 +1,16 @@
-Radiosonde Auto-RX Utilities
-============================
-This fork of rs1279's excellent RS codebase is intended to produce a set of utilities to allow automatic
-reception and uploading of radiosonde positions to APRS-IS and Habitat.
-Eventually I hope to have an automatic receive station installed at a strategic location in the
-Adelaide South Australia area, to better assist with gathering of RS41 radiosondes once they start being
-launched.
+### Automatic Radiosonde RX Station Extensions ###
+This fork of [rs1279's RS](https://github.com/rs1729/RS) codebase provides a set of utilities ('auto_rx') to allow automatic reception and uploading of radiosonde positions to multiple services, including:
+* The [Habitat High-Altitude Balloon Tracker](https://tracker.habhub.org)
+* APRS-IS (for display on sites such as [aprs.fi](https://aprs.fi)
+* [OziPlotter](https://github.com/projecthorus/oziplotter), for mobile radiosonde chasing.
-This folder contains a collection of Python scripts used to automatically scan for and decode Vaisala RS92 and RS41 radiosondes.
-It is intended to be an improvement upon the 'rtlsdr_scan.pl' script, and will run happily on a Raspberry Pi 3.
+Currently we support the following radiosonde types:
+* Vaisala RS92SGP
+* Vaisala RS41SGP
+Support for other radiosondes may be added as required (send us sondes to test with!)
-Features:
-* Automatic downloading of GPS Ephemeris or Almanac data, if the sonde is a Vaisala RS92.
-* Scanning and detection of Vaisala RS92 and RS41 radiosondes over a user-definable frequency range, using the rs_detect, rs92mod and rs41mod utilities from the master repository.
-* Uploading to:
- * APRS, with user-definable position comment.
- * Habitat
- * OziPlotter (Project Horus Offline Mapping)
-
-Dependencies
-------------
-* Currently runs on Python 2.7 (yeah, I know). Will probably work under Python 3.
-* Needs the following python packages (get them with `pip install `)
- * numpy
- * crcmod
-* Also needs (grab from apt-get):
- * sox
-* If you wish to use an RTLSDR with a bias tee, you will need a version of rtl-sdr which is newer than 2017-06-11. This may me having to grab the latest git version from: https://github.com/osmocom/rtl-sdr
-
-Usage
------
-* Run `sh build.sh` to build needed binaries from elsewhere in this repository.
-* Make a copy of station.cfg.example as station.cfg, and edit as appropriate.
-* Run `python auto_rx.py` to start the scan.
-* Wait. Status will be printed to stdout, and also to a log file in log/.log
-* By default the script will exit after 180 minutes (as by this point we expect the sonde to have landed). You can adjust this with the -t command line option.
-
-
-Suggested Crontab Entries
--------------------------
-Since sonde launches occur pretty much simultaneously worldwide, you can start the receiver script with crontab.
-
-I suggest the following crontab entries, noting that you need to ensure the PATH env-vars are set for the script to find rtl_power and rtl_fm.
-
-`PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/games:/usr/games`
-
-`15 11 * * * /home//RS/auto_rx/auto_rx.sh`
-
-`15 23 * * * /home//RS/auto_rx/auto_rx.sh`
+The key changes from the RS master codebase are:
+* Addition of the auto_rx directory, containing the auto_rx automatic reception software
+* Modifications to the rs92ecc and rs41ecc decoders, to provide telemetry output in JSON format.
+Refer to the wiki for [installation and setup instructions](https://github.com/projecthorus/radiosonde_auto_rx/wiki).
\ No newline at end of file
diff --git a/auto_rx/auto_rx.service b/auto_rx/auto_rx.service
index 26a9af9..36564e3 100644
--- a/auto_rx/auto_rx.service
+++ b/auto_rx/auto_rx.service
@@ -3,11 +3,11 @@ Description=auto_rx
After=syslog.target
[Service]
-ExecStart=/usr/bin/python /root/radiosonde_auto_rx/auto_rx/auto_rx.py -t 0
+ExecStart=/usr/bin/python /home/pi/radiosonde_auto_rx/auto_rx/auto_rx.py -t 0
Restart=always
RestartSec=3
-WorkingDirectory=/root/radiosonde_auto_rx/auto_rx/
-User=root
+WorkingDirectory=/home/pi/radiosonde_auto_rx/auto_rx/
+User=pi
[Install]
WantedBy=multi-user.target