#include "pico/stdlib.h"

#include "motor2040.hpp"

/*
Demonstrates how to create a Motor object and control it.
*/

using namespace motor;

// How many sweeps of the motor to perform
const uint SWEEPS = 2;

// The number of discrete sweep steps
const uint STEPS = 10;

// The time in milliseconds between each step of the sequence
const uint STEPS_INTERVAL_MS = 500;

// How far from zero to move the motor when sweeping
constexpr float SPEED_EXTENT = 1.0f;


// Create a motor
Motor m = Motor(motor2040::MOTOR_A);


int main() {
  stdio_init_all();

  // Initialise the motor
  m.init();

  // Enable the motor
  m.enable();
  sleep_ms(2000);

  // Drive at full positive
  m.full_positive();
  sleep_ms(2000);

  // Stop moving
  m.stop();
  sleep_ms(2000);

  // Drive at full negative
  m.full_negative();
  sleep_ms(2000);

  // Coast to a gradual stop
  m.coast();
  sleep_ms(2000);


  // Do a sine speed sweep
  for(auto j = 0u; j < SWEEPS; j++) {
    for(auto i = 0u; i < 360; i++) {
      m.speed(sin(((float)i * (float)M_PI) / 180.0f) * SPEED_EXTENT);
      sleep_ms(20);
    }
  }

  // Do a stepped speed sweep
  for(auto j = 0u; j < SWEEPS; j++) {
    for(auto i = 0u; i < STEPS; i++) {
      m.to_percent(i, 0, STEPS, 0.0 - SPEED_EXTENT, SPEED_EXTENT);
      sleep_ms(STEPS_INTERVAL_MS);
    }
    for(auto i = 0u; i < STEPS; i++) {
      m.to_percent(i, STEPS, 0, 0.0 - SPEED_EXTENT, SPEED_EXTENT);
      sleep_ms(STEPS_INTERVAL_MS);
    }
  }

  // Disable the motor
  m.disable();
}