#pragma once

#include <string>

#include "hardware/i2c.h"
#include "hardware/gpio.h"
#include "common/pimoroni_common.hpp"
#include "common/pimoroni_i2c.hpp"

namespace pimoroni {

  class AS7262 {
    //--------------------------------------------------
    // Constants
    //--------------------------------------------------
  public:
    static const uint8_t DEFAULT_I2C_ADDRESS  = 0x49;


    //--------------------------------------------------
    // Enums
    //--------------------------------------------------
  public:
    enum class gain : uint8_t {
      X1   = 0b00,
      X3_7 = 0b01,
      X16  = 0b10,
      X64  = 0b11
    };

    enum class illumination_current : uint8_t {
      ma12  = 0b00,
      ma25  = 0b01,
      ma50  = 0b10,
      ma100 = 0b11
    };

    enum class indicator_current : uint8_t {
      ma1 = 0b00,
      ma2 = 0b01,
      ma4 = 0b10,
      ma8 = 0b11,
    };

    enum class measurement_mode : uint8_t {
      cont_ygnv   = 0b00, // yellow, green, blue, violet - continuous
      cont_royg   = 0b01, // red, orange, yellow, green - continuous
      cont_roygbr = 0b10, // red, orange, yellow, green, violet - continuous
      oneshot     = 0b11  // everything - one-shot
    };


    //--------------------------------------------------
    // Substructures
    //--------------------------------------------------
  public:
    struct reading {
        float red;
        float orange;
        float yellow;
        float green;
        float blue;
        float violet;
    };


    //--------------------------------------------------
    // Variables
    //--------------------------------------------------
  private:
    I2C *i2c;

    // interface pins with our standard defaults where appropriate
    int8_t address    = DEFAULT_I2C_ADDRESS;
    uint interrupt    = PIN_UNUSED;


    //--------------------------------------------------
    // Constructors/Destructor
    //--------------------------------------------------
  public:
    AS7262(uint interrupt = PIN_UNUSED) : AS7262(new I2C(), interrupt) {};

    AS7262(I2C *i2c, uint interrupt = PIN_UNUSED) : i2c(i2c), interrupt(interrupt) {}


    //--------------------------------------------------
    // Methods
    //--------------------------------------------------
  public:
    bool init();
    void reset();

    // For print access in micropython
    i2c_inst_t* get_i2c() const;
    int get_sda() const;
    int get_scl() const;
    int get_int() const;

    uint8_t device_type();
    uint8_t hardware_version();
    void firmware_version(uint8_t &major_out, uint8_t &minor_out, uint8_t &sub_out);
    reading read();
    uint8_t temperature();

    void set_gain(gain gain);
    void set_measurement_mode(measurement_mode mode);
    void set_indicator_current(indicator_current current);
    void set_illumination_current(illumination_current current);
    void set_integration_time(float integration_time_ms);
    void set_leds(bool illumination, bool indicator);

private:
    bool data_ready();

    // Virtual i2c transfers, routed through read/write/status regs
    uint8_t i2c_reg_read_uint8(uint8_t reg);
    void i2c_reg_write_uint8(uint8_t reg, uint8_t value);
    uint16_t i2c_reg_read_uint16(uint8_t reg);
    float i2c_reg_read_float(uint8_t reg);

    uint8_t i2c_status(); 
    uint8_t i2c_read(uint8_t reg, uint8_t *values, uint8_t len);
    uint8_t i2c_write(uint8_t reg, uint8_t *values, uint8_t len);

    // *Real* single-byte i2c transfers
    uint8_t _i2c_reg_read_uint8(uint8_t reg);
    void _i2c_reg_write_uint8(uint8_t reg, uint8_t value);
  };

}