diff --git a/pico_uSDX_VFO_FFT_04_24.ino b/pico_uSDX_VFO_FFT_04_24.ino
new file mode 100644
index 0000000..0117a59
--- /dev/null
+++ b/pico_uSDX_VFO_FFT_04_24.ino
@@ -0,0 +1,282 @@
+/*
+  pico VFO + FFT Band Scope OLED128x64 2023/4/24 JR3XNW
+  Library to add
+  arduinoFFT.h
+  Wire.h
+  U8g2lib.h
+  Rotary.h
+  Etherkit Si5351 - Arduino Library https://github.com/etherkit/Si5351Arduino
+*/
+
+#include <Arduino.h>
+#include <Rotary.h>
+#include <U8g2lib.h>
+#include <Wire.h>
+#include "arduinoFFT.h"
+#include <si5351.h>
+
+#define PIN_IN1 0
+#define PIN_IN2 1
+#define STEP_BUTTON 2
+static int pos = 0;
+int rasPicoLED=25;
+
+Rotary r = Rotary(PIN_IN1, PIN_IN2);
+Si5351 si5351;
+
+//////////////////////////
+// Register set
+//////////////////////////
+unsigned long FREQ = 7000000; //
+unsigned long long FREQ_ULL = 700000000ULL;
+unsigned long long pll_freq = 75600000000ULL; //(0.01)
+
+const long LOW_FREQ = 7000000;    // lower frequency limit
+const long HI_FREQ = 7200000;     // upper frequency limit
+unsigned long FREQ_OLD = FREQ;    // old frequency
+int STEP = 1000;                  // STEP(default)
+
+int phase; //90° phase difference setting
+
+//////////////////////////
+// Rotary Encoder External Interrupt Processing Routine
+//////////////////////////
+void rotary_encoder(){
+  unsigned char result = r.process();
+  if(result){
+    if(result == DIR_CW){
+      FREQ = FREQ + STEP;
+    }else{
+    FREQ = FREQ - STEP;
+    }
+  }
+  FREQ = constrain(FREQ,LOW_FREQ,HI_FREQ); //Do not exceed the lower and upper limits of VFO
+  FREQ_ULL = FREQ * 100ULL;
+}
+
+//////////////////////////
+//Processing when STEP SW is pressed
+//////////////////////////
+void Fnc_Stp()
+{
+  if(STEP == 10){
+    STEP = 1000;
+  }
+  else{
+    STEP /= 10;
+  }
+  delay(10);
+  //Step_Disp(STEP);
+  while(digitalRead(STEP_BUTTON) == LOW){
+    delay(10);
+  }
+}
+
+///*************************OLED*****************************///
+
+U8G2_SSD1306_128X64_NONAME_F_HW_I2C u8g2(U8G2_R0, /* reset=*/U8X8_PIN_NONE); 
+//U8G2_SSD1306_128X32_UNIVISION_F_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);
+
+///***********************GRAPHICS***************************///
+
+#define PX1 63  //Positive frequency screen (Q) origin 62
+#define PY1 55  //Bottom edge of spectrum screen 23
+#define PY2 56  //24
+
+///**************************FFT*****************************///
+#define I_IN 26  //I-Input pins
+#define Q_IN 27  //Q-Input pins 
+
+#define SAMPLES 256  //Must be a power of 2
+#define WFrow 12
+
+arduinoFFT FFT = arduinoFFT();
+
+double vReal[SAMPLES];
+double vImag[SAMPLES];
+
+byte DSdata[256];
+byte WFdata[WFrow][128];
+
+///*************************core0***************************///
+
+void setup() {
+
+  Wire.begin();                   
+
+  si5351.init(SI5351_CRYSTAL_LOAD_8PF, 25000658, 0);  //Reference transmitting frequency of Si5351 //27003411//3593
+  si5351.drive_strength(SI5351_CLK0, SI5351_DRIVE_8MA); //Output 2mA approx. 3dBm / 8mA approx. 10dBm
+
+  r.begin();//Rotary encoder initialization
+  attachInterrupt(0,rotary_encoder,CHANGE); //External interrupt setting
+  attachInterrupt(1,rotary_encoder,CHANGE);
+  pinMode(STEP_BUTTON,INPUT_PULLUP); //STEP_BUTTON Set to input and pull-up
+                  
+  Freq_Set();
+  
+  pinMode(rasPicoLED,OUTPUT);      // pico built-in LED
+  Serial.begin(115200);
+
+  analogReadResolution(12);  // Set ADC full scale to 12 bits
+  u8g2.begin();
+  u8g2.setFont(u8g2_font_6x10_tf);
+  u8g2.setDrawColor(1);
+  u8g2.setFontPosTop();  // The upper left corner is used as the character position reference.
+  u8g2.clearBuffer();
+  u8g2.drawStr(0, 0, "VFO Band Scope v0.1");
+  u8g2.sendBuffer();
+  delay(500); 
+
+}
+
+///***********************core0 Main program*************************///
+void loop() {
+  
+  digitalWrite(25, HIGH);  // Built-in LED lights up during sampling 
+  /*SAMPLING*/
+  for(int i=0; i<SAMPLES; i++)
+  {
+    vReal[i] = (analogRead(I_IN) - 2048) * 3.3 / 4096.0;  //Arduinoは「0」。
+    vImag[i] = (analogRead(Q_IN) - 2048) * 3.3 / 4096.0;  //
+  }
+    digitalWrite(25, LOW);
+
+  if(digitalRead(STEP_BUTTON) == LOW){Fnc_Stp();} //When STEP_BUTTON is pressed, change the frequency STEP
+  
+  if(FREQ != FREQ_OLD){ 
+    Freq_Set();
+    //Freq_Disp(FREQ); 
+    FREQ_OLD = FREQ;            
+  }
+  delay(1);
+
+  /*FFT*/
+  FFT.Windowing(vReal, SAMPLES, FFT_WIN_TYP_HAMMING, FFT_FORWARD);
+  FFT.Windowing(vImag, SAMPLES, FFT_WIN_TYP_HAMMING, FFT_FORWARD); 
+  FFT.Compute(vReal, vImag, SAMPLES, FFT_REVERSE); //
+  FFT.ComplexToMagnitude(vReal, vImag, SAMPLES);
+    
+  u8g2.clearBuffer();   // Screen buffer clear
+  showScope();       // Spectrum Display
+  showGraphics();         // Scale line and other indications
+  showS_meter();  //Smeter
+  u8g2.sendBuffer();    // 
+
+  delay(1);  //Repeat the process every second OR:
+    
+}
+
+//////////////////////////
+// frequency set
+//////////////////////////
+void Freq_Set(){
+  // Set CLK0 and CLK1
+  si5351.set_freq_manual(FREQ_ULL, pll_freq, SI5351_CLK0);
+  si5351.set_freq_manual(FREQ_ULL, pll_freq, SI5351_CLK1);
+
+  phase = pll_freq / FREQ_ULL + 0.5; //PLL frequency/transmitter frequency 90° phase difference setting value Rounding
+  si5351.set_phase(SI5351_CLK0, 0);
+  si5351.set_phase(SI5351_CLK1, phase); //90°
+
+  // We need to reset the PLL before they will be in phase alignment
+  si5351.pll_reset(SI5351_PLLA);
+
+  delay(10);
+}
+
+///******************************core1********************************///
+void setup1() {
+}
+
+///***********************core1 Main program*************************///
+void loop1() {
+}
+
+void showScope() {  // Spectrum Display
+  int d, d1, d2;
+  
+  for (int xi = 1; xi < 64; xi++) {  // Positive frequency spectrum display
+    d1 = barLength(vReal[xi*2]);
+    d2 = barLength(vImag[xi*2+1]);
+    d = sqrt(d1 * d1 + d2 * d2);
+    u8g2.drawVLine(xi + 64 , PY1 - d, d);  
+  }
+  for (int xi = 64; xi < 128; xi++) { // Negative frequency spectrum display
+    d1 = barLength(vReal[xi*2]); 
+    d2 = barLength(vImag[xi*2+1]);
+    d = sqrt(d1 * d1 + d2 * d2);
+    u8g2.drawVLine(xi - 64 , PY1 - d, d); 
+  }
+}
+
+void showS_meter() {  // Spectrum Display
+  int d, d1, d2;
+  
+  for (int xi = 1; xi < 64; xi++) {  // Positive frequency spectrum display
+    d1 = barLength(vReal[xi*2]);
+    d2 = barLength(vImag[xi*2+1]);
+    d = (d1 + d2)*1.5 ; //
+    u8g2.drawBox(76, 23, d, 5);  
+  }
+}
+
+int barLength(double d) {  // Calculate the length of the graph
+  float fy;
+  int y;
+
+  fy = 14.0 * (log10(d) + 3.3);  //
+  y = fy;
+  y = constrain(y, 0, 16);  // Cut off upper and lower limits 85
+
+  return y;
+}
+
+void showGraphics() {  // Modifying Graphs
+  // area demarcation line
+  u8g2.drawFrame(0, 0, 128, 20);
+  u8g2.drawFrame(0, 31, 128, 26);
+  u8g2.drawLine(40, 0, 40, 19);
+
+  u8g2.setFont(u8g2_font_5x7_tf);  // 
+  u8g2.drawStr(3, 2, "picoSDR");       //
+  u8g2.drawStr(3, 10, "JR3XNW>");
+
+  u8g2.setFont(u8g2_font_mozart_nbp_tr);  // Small font(3x5) u8g2_font_6x13_tf
+  u8g2.drawStr(0, 21, "STEP"); 
+  u8g2.drawStr(62, 21, "SM");
+
+  // Frequency scale (horizontal axis)
+  u8g2.drawBox(PX1 - 22, PY2, 2, 2);  // Positive Frequency 10kscale
+  u8g2.drawBox(PX1 - 44, PY2, 2, 2);  // Positive Frequency 20kscale
+
+  u8g2.drawBox(PX1, PY2, 2, 2);       // Negative frequency 0kscale
+  u8g2.drawBox(PX1 + 22, PY2, 2, 2);  // Negative frequency 10kscale
+  u8g2.drawBox(PX1 + 45, PY2, 2, 2);  // Negative frequency 20kscale
+
+  u8g2.setFont(u8g2_font_micro_tr);  // Small font(3x5)
+  u8g2.drawStr(11, 58, "-20k");       // Negative frequency display 58
+  u8g2.drawStr(34, 58, "-10k");
+
+  u8g2.drawStr(63, 58, "0");  // Positive Frequency
+  u8g2.drawStr(81, 58, "10k");
+  u8g2.drawStr(105, 58, "20k");
+  
+  // Dummy display for future use
+  String freqt;
+  u8g2.setFont(u8g2_font_lubR12_tf); //u8g_font_unifont, u8g2_font_t0_16_mr, u8g2_font_mozart_nbp_tr, u8g2_font_t0_15_tf, u8g2_font_crox2hb_tn
+  //u8g2.drawStr(44, 3, fff);
+  freqt = String (FREQ);
+  u8g2.setCursor(44,3);
+  u8g2.print(freqt.substring(0,1) + "." + freqt.substring(1,4) + "." + freqt.substring(4));
+
+  //STEP Display
+  u8g2.setFont(u8g2_font_mozart_nbp_tr);  //
+  if (STEP == 1000) {
+    u8g2.drawStr(26, 21, "1kHz");
+  }
+    else if ( STEP == 100) {
+      u8g2.drawStr(26, 21, "100Hz");
+    } else {
+      u8g2.drawStr(26, 21, "10Hz");
+    }  
+}
diff --git a/pico_uSDX_VFO_FFT_04_24.ino.uf2 b/pico_uSDX_VFO_FFT_04_24.ino.uf2
new file mode 100644
index 0000000..4b97f46
Binary files /dev/null and b/pico_uSDX_VFO_FFT_04_24.ino.uf2 differ
diff --git a/pico_uSDX_VFO_FFT_04_24.jpg b/pico_uSDX_VFO_FFT_04_24.jpg
new file mode 100644
index 0000000..44e9bb5
Binary files /dev/null and b/pico_uSDX_VFO_FFT_04_24.jpg differ