mirror
/
pico-tracker
kopia lustrzana https://github.com/bristol-seds/pico-tracker
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
pico-tracker/hardware
Historia
Richard Meadows 9f06e0889d [low-power-solar] fix note on partslist 2016-04-18 18:28:27 +01:00
..
graphics Added new "simple" solar/primary design that just uses a LTC3105. Designed for use with a 1.5V primary lithium source. 2015-09-15 16:25:22 +01:00
hf-breakout Various bit rot on parts lists 2015-12-20 16:26:10 +00:00
internal Various bit rot on parts lists 2015-12-20 16:26:10 +00:00
low-power-breakout low-power-breakout] Fix some bit-rot 2015-12-13 14:32:36 +00:00
low-power-side [low-power] v0.987.3 Added pull-down on WDI 2016-01-18 12:07:08 +00:00
low-power-solar [low-power-solar] fix note on partslist 2016-04-18 18:28:27 +01:00
main-aaa Added vias though all the pads on the debug connector 2015-06-29 20:00:03 +01:00
main-solar Small board change.. 2015-09-22 13:25:37 +01:00
main-solar-hf Added yet more parts and things 2015-06-15 23:00:36 +01:00
main-solar-simple Hardware v0.985.3, reduce external thermistor holes to 0.5mm dia 2015-10-08 21:43:56 +01:00
notes Updated many parts lists, updated bard numbering, removed makefiles for inactive things 2015-06-15 22:56:28 +01:00
partslist@5db845690c Update partslist 2015-10-08 21:44:04 +01:00
prog-1.8 More parts updates 2015-06-19 15:14:09 +01:00
prog-3.3 Re-size output pngs to be a bit more reasonably sized 2015-06-17 21:28:51 +01:00
solar-breakout [solar-breakout] replace LTC4071 -> LTC4070 as tested 2016-02-28 15:42:35 +00:00
Makefile Added handy recursive make for making all hardware. I promise it's not harmful 2015-06-15 22:41:37 +01:00
README.md [low-power] v0.987.3 Added pull-down on WDI 2016-01-18 12:07:08 +00:00
fbri.lbr Added hardware library 2014-06-25 21:07:37 +01:00
pa_match.png Such commit. Many change. 2014-08-23 22:18:49 +01:00

README.md

Hardware Revisions

Most hardware that has been built has a version number

Version Description Exists/Existed Flights used on
v0.96.0 Original AAA Battery. Flown with modifications to connect tcxo to mcu. x UBSEDS3-8?+UBSEDS12
v0.981.0 Solar Power SPV1040. Flown with modifications simplify power circuit. x UBSEDS9
v0.981.1 Minor fixes
v0.982.0 AAA Battery. Never fully populated, used for lab testing. x
v0.982.1 Minor fixes
v0.984.0 First attempt at internal balloon board
v0.985.0 Solar Power/Primary AAA Lithium x UBSEDS10-11
v0.985.1 Added DNP/0Ω between solar and MPPT set for use when only a battery is connected
v0.985.2 BMP180 -> MS5607 Pressure / Temperature Sensor
v0.985.3 Smaller holes for external thermistor
v0.986.0 Low Power with side mounting GPS chip antenna
v0.986.1 Low Power. Add 10k i2c pull ups
v0.986.1 Low Power. Rearranged matching network
v0.986.3 Low Power. Added L0'-C0' tank in paralell. Might work, should test
v0.986.4 Low Power. Added LIS2D accelerometer. Optional
v0.986.5 Low Power. Added TS3006 low power lf clock
v0.986.6 Low Power. Added LDO for GPS, LF TCXO for GPS
v0.986.7 Low Power. Changed low power lf clock, added vreg on breakout for optional power testing
v0.986.8 Low Power. Changed memory pads, GPS LDO and specified SAMD20E18A-MN with more flash and higher grade packaging x
v0.986.9 Low Power. 80x80mm Breakout
v0.987.0 Low Power. Added 32kHz TCXO RC filters, replaced GPS LDO with MOSFET, remove IMU, vreg on b/out, update SE880 footprint, Watchdog, Radio, filter design
v0.987.1 Low Power. Switch LF Clock to XOSC32K pin from GCLK_IO[0]. Allows feed to any GCLK. Bit-bang i2c instead
v0.987.2 Low Power. Adjusted 100µF cap from 1210 to 1206 x
v0.987.3 Low Power. Added pull-down on WDI