Description

Build-a-Pi will allow you to get up and running fast with a Raspberry Pi for ham radio. Rather than downloading a pre-built image where you have no choices in the build, Build-a- Pi gives you complete control over the build. It allows you to choose the applications you want to install and skip the ones you don’t need. This keeps your pi as lean and mean as possible. A list of applications available using Build-a-Pi can be found below on this page. Use it as your base and add additional applications as needed down the road. Videos coming soon

Needed info for pi build

During the install you will need a few pieces of information depending on what you choose to install. If installing all apps, you will need:

For Hotspot: Current WiFi SSID & Current WiFi Password

For Pat Winlink: Winlink Password & Grid Square

Install

This script is intended to run on a brand new installation of Buster. It should not be run on a pi that you have already started installing applications on. Install additional apps that you require after running this script.

Flash a fresh copy of Buster to a SD card and run the following command

 git clone https://github.com/km4ack/pi-build.git $HOME/pi-build && bash $HOME/pi-build/build-a-pi

Issue Reporting - Feature Requests

Please report issues & feature requests here https://github.com/km4ack/pi-build/issues

Available Apps to Install

RTC | Real Time Clock

Software for DS3231 real time clock (Available through update script after initial install)

HOTSPOT:

Hotspot is used to generate a wifi hotspot that you can connect to with other wireless devices. This is useful when in the field so you can connect to and contol the pi from a wireless device.

GPS:

This will install the needed utilities to get a GPS device configured as a time source on the pi. Helpful when you are not connected to the internet since the pi doesn't have a real time clock and therefore will NOT keep accurate time when powered off. Confirmed to work with this GPS https://amzn.to/2R9Muup Other GPS units may work but have not been tested.

FLRIG:

Rig contol graphical interface. http://www.w1hkj.com/

FLDIGI:

Digital Mode Software http://www.w1hkj.com/

FLMSG:

Forms manager for FLDIGI http://www.w1hkj.com/

FLAMP:

Amateur Multicast Protocol - file transfer program http://www.w1hkj.com/

FLWRAP

file encapsulation / compression

PAT:

Winlink client for Raspberry Pi https://getpat.io/

PATMENU:

Menu for configuring Pat. Recommended if installing Pat. https://github.com/km4ack/patmenu

ARDOPC:

HF modem for Pat. Recommended if installing Pat https://www.cantab.net/users/john.wiseman/Documents/ARDOPC.html

ARDOPGUI:

GUI interface for ARDOPC. Recommended if installing Pat

DIREWOLF:

Software TNC. In this setup, direwolf is used for 2M packet connection with Pat and can be used for APRS connection with Xastir. Recommneded if installing Pat or Xastir https://github.com/wb2osz/direwolf/tree/master/doc

AX25:

AX25 tools for Direwolf & Pat. Recommended if installing Pat.

HAMLIB:

Rig contol software. https://sourceforge.net/projects/hamlib/

PULSE:

Pulse audio. Provides a way to configure virtual sound cards. REQUIRED for AMRRON ops.

JS8:

JS8Call digital software https://js8call.com

M0IAX:

Tools for working with JS8Call. Recommended if installing JS8Call https://github.com/m0iax/

WSJTX:

FT8 & WISPR software suite. https://sourceforge.net/projects/wsjt/

CHIRP:

Software to program radios. https://chirp.danplanet.com

XASTIR:

GUI interface useful when configuring APRS nodes. https://sourceforge.net/projects/xastir/

YAAC:

Yet Another APRS Client GUI interface useful when configuring APRS nodes. https://www.ka2ddo.org/ka2ddo/YAAC.html

PYQSO:

Logging software https://github.com/ctjacobs/pyqso

GPREDICT:

Satellite Tracking http://gpredict.oz9aec.net/

CQRLOG:

Loggin Software https://www.cqrlog.com/

QSSTV:

Slow scan tv http://users.telenet.be/on4qz/qsstv/index.html

Gridtracker

https://tagloomis.com/

Propagation (VOACAP)

Propagation Prediction Software https://www.qsl.net/hz1jw/voacapl/index.html

Emergency Email Server (EES):

My personal EES. Requires hotspot to be installed. https://youtu.be/XC9vdAnolO0
To access the EES, connect to the pi's hotspot, open a web browser, and navigate to email.com
or open a web browser and navigate to the pi's ip adderss on your local network.
Admin credentials are admin/admin by default but can be changed in the file found at
/var/www/html/config.php
For more configuration options - https://youtu.be/KaEeCq50Mno

Call Sign Lookup

Look amateur radio call signs

Dipole Calculator

Calculate lengths needed for dipole legs

Log Viewer

Graphic viewer to view/manage log files

Gparted

Disk utility