Build a Pi has never and will not ever try to force any user to run BOINC (Berkeley Open Infrastructure for Network Computing). Build a pi has been always been about giving the end user a choice in the software they run. It is the reason Build a Pi isn't distrubuted as a pre built image. You have the final say in what you run on your pi. Install as little or as much as you choose. While it doesn't include as many apps as some of the pre-built images, it should give you a great base to work with and then you can add additional applications that may be important to you on top of Build a Pi. Want to run BOINC? Feel free because freedom is the basis of Build a Pi. The power is yours and yours alone.
Hotspot is used to generate a wifi hotspot that you can connect to with other wireless devices. This is useful when in the field so you can connect to and contol the pi from a wireless device.
If enabled, the hotspot will only activate IF the Pi is not connected to a wireless network. The hotspot will either activate at bootup, OR a maximum of 5 minutes AFTER you have forcefully disconnected from a wireless network. You can tune that detection delay in the settings.
The hotspot default SSID is *RpiHotspot* and the default IP address of the Pi is 10.10.10.10.
Make sure to enable either VNC or SSH server in order to remotely connect to your Pi at that address.
This will install the needed utilities to get a GPS device configured as a time source on the pi. Helpful when you are not connected to the internet since the pi doesn't have a real time clock and therefore will NOT keep accurate time when powered off. Confirmed to work with this GPS https://amzn.to/2R9Muup Other GPS units may work but have not been tested.
Amateur Multicast Protocol - file transfer program http://www.w1hkj.com/
#### FLWRAP
file encapsulation / compression
#### PAT:
Winlink client for Raspberry Pi https://getpat.io/
#### PATMENU:
Menu for configuring Pat. Recommended if installing Pat. https://github.com/km4ack/patmenu
#### ARDOPC:
HF modem for Pat. Recommended if installing Pat https://www.cantab.net/users/john.wiseman/Documents/ARDOPC.html
#### ARDOPGUI:
GUI interface for ARDOPC. Recommended if installing Pat
#### DIREWOLF:
Software TNC. In this setup, direwolf is used for 2M packet connection with Pat and can be used for APRS connection with Xastir. Recommneded if installing Pat or Xastir https://github.com/wb2osz/direwolf/tree/master/doc
#### AX25:
AX25 tools for Direwolf & Pat. Recommended if installing Pat.