kopia lustrzana https://github.com/DL7AD/pecanpico9
138 wiersze
3.2 KiB
C
138 wiersze
3.2 KiB
C
#include "ch.h"
|
|
#include "hal.h"
|
|
|
|
#include "config.h"
|
|
#include "padc.h"
|
|
#include "pac1720.h"
|
|
#include "debug.h"
|
|
|
|
#define ADC_NUM_CHANNELS 4 /* Amount of channels (solar, battery, temperature) */
|
|
#define VCC_REF_LOW 1850 /* mV */
|
|
#define VCC_REF_HIGH 3070 /* mV */
|
|
|
|
#define DIVIDER_VSOL 205/64 /* VSol -- 22kOhm -- ADC -- 10kOhm -- GND */
|
|
#define DIVIDER_VBAT 205/64 /* VBat -- 22KOhm -- ADC -- 10kOhm -- GND */
|
|
#define DIVIDER_VUSB 205/64 /* VUSB -- 22KOhm -- ADC -- 10kOhm -- GND */
|
|
|
|
static adcsample_t samples[ADC_NUM_CHANNELS]; // ADC sample buffer
|
|
uint16_t vcc_ref = VCC_REF_LOW;
|
|
|
|
void adccb(ADCDriver *adcp, adcsample_t *buffer, size_t n) {
|
|
(void)adcp;
|
|
(void)buffer;
|
|
(void)n;
|
|
}
|
|
|
|
/*
|
|
* ADC conversion group.
|
|
* Mode: Linear buffer, 4 samples of 4 channels, SW triggered.
|
|
* Channels: Solar voltage divider ADC1_IN9
|
|
* USB sensor ADC1_IN14
|
|
* Battery voltage divider ADC1_IN13
|
|
* Temperature sensor ADC1_IN16
|
|
*/
|
|
static const ADCConversionGroup adcgrpcfg = {
|
|
FALSE,
|
|
ADC_NUM_CHANNELS,
|
|
adccb,
|
|
NULL,
|
|
/* HW dependent part.*/
|
|
0,
|
|
ADC_CR2_SWSTART,
|
|
ADC_SMPR1_SMP_AN14(ADC_SAMPLE_144) | ADC_SMPR1_SMP_AN13(ADC_SAMPLE_144) | ADC_SMPR1_SMP_SENSOR(ADC_SAMPLE_144),
|
|
ADC_SMPR2_SMP_AN9(ADC_SAMPLE_144),
|
|
ADC_SQR1_NUM_CH(ADC_NUM_CHANNELS),
|
|
0,
|
|
ADC_SQR3_SQ1_N(ADC_CHANNEL_IN9) | ADC_SQR3_SQ2_N(ADC_CHANNEL_IN14) | ADC_SQR3_SQ3_N(ADC_CHANNEL_IN13) | ADC_SQR3_SQ4_N(ADC_CHANNEL_SENSOR)
|
|
};
|
|
|
|
void initADC(void)
|
|
{
|
|
adcStart(&ADCD1, NULL);
|
|
adcSTM32EnableTSVREFE();
|
|
palSetLineMode(LINE_ADC_VSOL, PAL_MODE_INPUT_ANALOG); // Solar panels
|
|
palSetLineMode(LINE_ADC_VBAT, PAL_MODE_INPUT_ANALOG); // Battery
|
|
palSetLineMode(LINE_ADC_VUSB, PAL_MODE_INPUT_ANALOG); // USB
|
|
}
|
|
|
|
void deinitADC(void)
|
|
{
|
|
adcStop(&ADCD1);
|
|
}
|
|
|
|
void doConversion(void)
|
|
{
|
|
initADC();
|
|
adcStartConversion(&ADCD1, &adcgrpcfg, samples, 1);
|
|
chThdSleepMilliseconds(50); // Wait until conversion is finished
|
|
deinitADC();
|
|
}
|
|
|
|
uint16_t getBatteryVoltageMV_STM32(void)
|
|
{
|
|
doConversion();
|
|
return samples[2] * vcc_ref * DIVIDER_VBAT / 4096;
|
|
}
|
|
|
|
uint16_t getBatteryVoltageMV(void)
|
|
{
|
|
uint16_t vbat = getBatteryVoltageMV_STM32();
|
|
|
|
// Get voltage from PAC1720 (PAC1720 returns false redings below 2.35V)
|
|
if(vbat >= 2500)
|
|
{
|
|
uint16_t vbat_pac = pac1720_getVbat(); // Get value from PAC1720
|
|
if(vbat_pac) // Apply it if valid
|
|
vbat = vbat_pac;
|
|
}
|
|
|
|
return vbat;
|
|
}
|
|
|
|
uint16_t getSolarVoltageMV(void)
|
|
{
|
|
uint16_t vbat = getBatteryVoltageMV_STM32();
|
|
|
|
// Get voltage from PAC1720 (PAC1720 returns false redings below 2.35V)
|
|
if(vbat >= 2500)
|
|
{
|
|
uint16_t vsol_pac = pac1720_getVsol(); // Get value from PAC1720
|
|
if(vsol_pac)
|
|
return vsol_pac;
|
|
}
|
|
return samples[0] * vcc_ref * DIVIDER_VSOL / 4096;
|
|
}
|
|
|
|
uint16_t getUSBVoltageMV(void)
|
|
{
|
|
doConversion();
|
|
return samples[1] * vcc_ref * DIVIDER_VUSB / 4096;
|
|
}
|
|
|
|
uint16_t getSTM32Temperature(void)
|
|
{
|
|
doConversion();
|
|
return samples[3];
|
|
}
|
|
|
|
void boost_voltage(bool boost)
|
|
{
|
|
if(boost)
|
|
{
|
|
|
|
// Ramp up to 3.07V
|
|
palClearLine(LINE_VBOOST);
|
|
palSetLineMode(LINE_VBOOST, PAL_MODE_OUTPUT_PUSHPULL);
|
|
palClearLine(LINE_VBOOST);
|
|
vcc_ref = VCC_REF_HIGH;
|
|
|
|
} else {
|
|
|
|
// Switch back to 1.86V
|
|
palSetLineMode(LINE_VBOOST, PAL_MODE_INPUT);
|
|
vcc_ref = VCC_REF_LOW;
|
|
|
|
}
|
|
}
|
|
|