kopia lustrzana https://github.com/DL7AD/pecanpico9
33 wiersze
1.3 KiB
C
33 wiersze
1.3 KiB
C
#ifndef __CONFIG_H__
|
|
#define __CONFIG_H__
|
|
|
|
#include "ch.h"
|
|
#include "hal.h"
|
|
#include "chprintf.h"
|
|
#include "types.h"
|
|
#include "radio.h"
|
|
#include "sleep.h"
|
|
|
|
#define TRACK_CYCLE_TIME 60 /* Tracking cycle (all peripheral data [airpressure, GPS, temperature, ...] is collected each x seconds */
|
|
|
|
#define LOG_CYCLE_TIME 60 /* Log cycle time in seconds */
|
|
#define LOG_FLASH_ADDR1 0x080C0000 /* Log flash memory address 1 */
|
|
#define LOG_FLASH_ADDR2 0x080E0000 /* Log flash memory address 2 */
|
|
#define LOG_SECTOR_SIZE 0x20000 /* Log flash memory size */
|
|
|
|
#define GPS_ON_VBAT 3000 /* Battery voltage threshold at which GPS is switched on */
|
|
#define GPS_OFF_VBAT 2500 /* Battery voltage threshold at which GPS is switched off */
|
|
|
|
#define TRACE_TIME TRUE /* Enables time tracing on debugging port */
|
|
#define TRACE_FILE FALSE /* Enables file and line tracing on debugging port */
|
|
|
|
#define RUN_3V TRUE /* Lets the tracker run a 3V otherwise 1.8V. 3V is needed to do 20dBm radio output power.
|
|
* With 1.8V only 15dBm can be done. Some serial-USB adapters also need a 3V IO level in
|
|
* order to work. However 3V takes a lot of power in idle. You can save energy using 1.8V. */
|
|
|
|
void start_user_modules(void);
|
|
extern module_conf_t config[9];
|
|
|
|
#endif
|
|
|