kopia lustrzana https://github.com/DL7AD/pecanpico9
39 wiersze
1.6 KiB
C
39 wiersze
1.6 KiB
C
#ifndef __CONFIG_H__
|
|
#define __CONFIG_H__
|
|
|
|
#define LOG_FLASH_ADDR1 0x080C0000 /* Log flash memory address 1 */
|
|
#define LOG_FLASH_ADDR2 0x080E0000 /* Log flash memory address 2 */
|
|
#define LOG_SECTOR_SIZE 0x20000 /* Log flash memory size */
|
|
|
|
#define TRACE_TIME TRUE /* Enables time tracing on debugging port */
|
|
#define TRACE_FILE FALSE /* Enables file and line tracing on debugging port */
|
|
|
|
#define ACTIVATE_3V TRUE /* Lets the tracker run a 3V otherwise 1.8V. 3V is needed to do 20dBm radio output power
|
|
* and to run USB. With 1.8V only 15dBm can be done only. Some serial-USB adapters also
|
|
* need a 3V IO level in order to work. However 3V takes a lot of power in idle. You can
|
|
* save energy using 1.8V. This option is activated automatically if ACTIVATE_USB is set
|
|
* true. */
|
|
|
|
#define ACTIVATE_USB FALSE /* If set to true, the USB interface will be switched on. The tracker is also switched to
|
|
* 3V, because USB would not work at 1.8V. Note that the transmission power is increased
|
|
* too when operating at 3V. This option will also run the STM32 at 48MHz (AHB) permanently
|
|
* because USB needs that speed, otherwise it is running at 6MHz which saves a lot of power. */
|
|
|
|
#include "ch.h"
|
|
#include "types.h"
|
|
#include "radio.h"
|
|
|
|
void start_user_modules(void);
|
|
|
|
extern module_conf_t config[7];
|
|
|
|
extern systime_t track_cycle_time;
|
|
extern systime_t log_cycle_time;
|
|
extern bool keep_cam_switched_on;
|
|
extern uint16_t gps_on_vbat;
|
|
extern uint16_t gps_off_vbat;
|
|
extern uint16_t gps_onper_vbat;
|
|
|
|
#endif
|
|
|