get rid of separate constants file

bme280.py

@@ -34,9 +34,21 @@
 # THE SOFTWARE.
 
 import time
-from bme280_const import *
 from ustruct import unpack, unpack_from
 
+# BME280 default address.
+BME280_I2CADDR = 0x76
+
+# Operating Modes
+BME280_OSAMPLE_1 = 1
+BME280_OSAMPLE_2 = 2
+BME280_OSAMPLE_4 = 3
+BME280_OSAMPLE_8 = 4
+BME280_OSAMPLE_16 = 5
+
+BME280_REGISTER_CONTROL_HUM = 0xF2
+BME280_REGISTER_CONTROL = 0xF4
+
 class BME280:
     def __init__(self, mode=BME280_OSAMPLE_1, address=BME280_I2CADDR, i2c=None,
                  **kwargs):

bme280_const.py

@@ -1,81 +0,0 @@
-
-# Author: Paul Cunnane 2016
-#
-# This module borrows heavily from the Adafruit BME280 Python library
-# and the Adafruit GPIO/I2C library. Original copyright notices are reproduced
-# below.
-#
-# Those libraries were written for the Raspberry Pi. This modification is
-# intended for the MicroPython and esp8266 boards.
-#
-# Copyright (c) 2014 Adafruit Industries
-# Author: Tony DiCola
-#
-# Based on the BMP280 driver with BME280 changes provided by
-# David J Taylor, Edinburgh (www.satsignal.eu)
-#
-# Based on Adafruit_I2C.py created by Kevin Townsend.
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to deal
-# in the Software without restriction, including without limitation the rights
-# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-# copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-# THE SOFTWARE.
-
-
-# BME280 default address.
-BME280_I2CADDR = 0x76
-
-# Operating Modes
-BME280_OSAMPLE_1 = 1
-BME280_OSAMPLE_2 = 2
-BME280_OSAMPLE_4 = 3
-BME280_OSAMPLE_8 = 4
-BME280_OSAMPLE_16 = 5
-
-# BME280 Registers
-
-BME280_REGISTER_DIG_T1 = 0x88  # Trimming parameter registers
-BME280_REGISTER_DIG_T2 = 0x8A
-BME280_REGISTER_DIG_T3 = 0x8C
-
-BME280_REGISTER_DIG_P1 = 0x8E
-BME280_REGISTER_DIG_P2 = 0x90
-BME280_REGISTER_DIG_P3 = 0x92
-BME280_REGISTER_DIG_P4 = 0x94
-BME280_REGISTER_DIG_P5 = 0x96
-BME280_REGISTER_DIG_P6 = 0x98
-BME280_REGISTER_DIG_P7 = 0x9A
-BME280_REGISTER_DIG_P8 = 0x9C
-BME280_REGISTER_DIG_P9 = 0x9E
-
-BME280_REGISTER_DIG_H1 = 0xA1
-BME280_REGISTER_DIG_H2 = 0xE1
-BME280_REGISTER_DIG_H3 = 0xE3
-BME280_REGISTER_DIG_H4 = 0xE4
-BME280_REGISTER_DIG_H5 = 0xE5
-BME280_REGISTER_DIG_H6 = 0xE6
-BME280_REGISTER_DIG_H7 = 0xE7
-
-BME280_REGISTER_CHIPID = 0xD0
-BME280_REGISTER_VERSION = 0xD1
-BME280_REGISTER_SOFTRESET = 0xE0
-
-BME280_REGISTER_CONTROL_HUM = 0xF2
-BME280_REGISTER_CONTROL = 0xF4
-BME280_REGISTER_CONFIG = 0xF5
-BME280_REGISTER_PRESSURE_DATA = 0xF7
-BME280_REGISTER_TEMP_DATA = 0xFA
-BME280_REGISTER_HUMIDITY_DATA = 0xFD