kopia lustrzana https://github.com/micropython/micropython
Created Board HydraBus V1.0 (markdown)
rodzic
b5ba6730f3
commit
b4f30ac382
|
@ -0,0 +1,14 @@
|
|||
Cortex M4F
|
||||
* HydraBus 1.0 http://hydrabus.com/hydrabus-1-0-specifications
|
||||
* Hardware doc, schematic/board are available on github: https://github.com/bvernoux/hydrabus/tree/master/hardware, Hardware licence CC BY NC (for commercial licence contact info@hydrabus.com).
|
||||
* HydraBus/HydraNFC... products are Available in Seeed Studio Online Shop: http://www.seeedstudio.com/depot/HydraBus-m-132.html
|
||||
|
||||
###Features###
|
||||
* Standard Dangerous Prototypes PCB size DP6037_v1 (see http://dangerousprototypes.com/docs/Sick_of_Beige_basic_case_v1) (very small 60mm x 37mm size).
|
||||
* Programming firmware through USB DFU (without any debugger) with USB1 FS.
|
||||
* Debug/Programming through low cost SWD Debug connector (can be programmed/debugged using a low cost STM32F4 Discovery board for less than 20US$).
|
||||
* Two MicroUSB port (1 OTG and 1 Device/Host) with ESD protection.
|
||||
* MicroSD slot with 4bit SD and SDIO mode support in hardware (up to 48MHz about 24MB/s).
|
||||
* Reset & User Button with User Led (can be disabled to reuse I/O for other stuff).
|
||||
* Breakout of all 44 I/O (some are used by MicroSD and USB 1&2).
|
||||
* Micro Python firmware ported to HydraBus see HydraBus Micro Python github: https://github.com/bvernoux/hydrabus/tree/master/firmware/micropython
|
Ładowanie…
Reference in New Issue