kopia lustrzana https://github.com/micropython/micropython
76 wiersze
2.8 KiB
C
76 wiersze
2.8 KiB
C
/*
|
|
* This file is part of the MicroPython project, http://micropython.org/
|
|
* The MIT License (MIT)
|
|
* Copyright (c) 2022 Arduino SA
|
|
*/
|
|
|
|
#define MICROPY_HW_BOARD_NAME "Arduino Nano 33 BLE Sense"
|
|
#define MICROPY_HW_MCU_NAME "NRF52840"
|
|
|
|
#define MICROPY_MBFS (1)
|
|
|
|
#define MICROPY_BOARD_EARLY_INIT NANO33_board_early_init
|
|
#define MICROPY_BOARD_DEINIT NANO33_board_deinit
|
|
#define MICROPY_BOARD_ENTER_BOOTLOADER(nargs, args) NANO33_board_enter_bootloader()
|
|
|
|
#define MICROPY_PY_MACHINE_UART (1)
|
|
#define MICROPY_PY_MACHINE_PWM (1)
|
|
#define MICROPY_PY_MACHINE_HW_PWM (1)
|
|
#define MICROPY_PY_MACHINE_HW_SPI (1)
|
|
#define MICROPY_PY_MACHINE_RTCOUNTER (1)
|
|
#define MICROPY_PY_MACHINE_I2C (1)
|
|
#define MICROPY_PY_MACHINE_ADC (1)
|
|
#define MICROPY_PY_MACHINE_TEMP (1)
|
|
|
|
#define MICROPY_HW_USB_CDC (1)
|
|
#define MICROPY_HW_HAS_LED (1)
|
|
#define MICROPY_HW_HAS_SWITCH (0)
|
|
#define MICROPY_HW_HAS_FLASH (0)
|
|
#define MICROPY_HW_HAS_SDCARD (0)
|
|
#define MICROPY_HW_HAS_MMA7660 (0)
|
|
#define MICROPY_HW_HAS_LIS3DSH (0)
|
|
#define MICROPY_HW_HAS_LCD (0)
|
|
#define MICROPY_HW_ENABLE_RNG (1)
|
|
#define MICROPY_HW_ENABLE_RTC (1)
|
|
#define MICROPY_HW_ENABLE_TIMER (0)
|
|
#define MICROPY_HW_ENABLE_SERVO (0)
|
|
#define MICROPY_HW_ENABLE_DAC (0)
|
|
#define MICROPY_HW_ENABLE_CAN (0)
|
|
|
|
// LEDs config
|
|
#define MICROPY_HW_LED_COUNT (4) // 3 RGB + 1 Yellow
|
|
#define MICROPY_HW_LED_PULLUP (1) // RGB LED is active low
|
|
#define MICROPY_HW_LED4_PULLUP (0) // Yellow is active high
|
|
#define MICROPY_HW_LED1 (24) // RED
|
|
#define MICROPY_HW_LED2 (16) // GREEN
|
|
#define MICROPY_HW_LED3 (6) // BLUE
|
|
#define MICROPY_HW_LED4 (13) // Yellow
|
|
#define HELP_TEXT_BOARD_LED "1,2,3,4"
|
|
|
|
// UART config
|
|
#define MICROPY_HW_UART1_TX (32 + 3)
|
|
#define MICROPY_HW_UART1_RX (32 + 10)
|
|
// #define MICROPY_HW_UART1_CTS (7)
|
|
// #define MICROPY_HW_UART1_RTS (5)
|
|
// #define MICROPY_HW_UART1_HWFC (1)
|
|
|
|
// SPI0 config
|
|
#define MICROPY_HW_SPI0_NAME "SPI0"
|
|
#define MICROPY_HW_SPI0_SCK (13)
|
|
#define MICROPY_HW_SPI0_MOSI (32 + 1)
|
|
#define MICROPY_HW_SPI0_MISO (32 + 8)
|
|
|
|
// PWM config
|
|
#define MICROPY_HW_PWM0_NAME "PWM0"
|
|
#define MICROPY_HW_PWM1_NAME "PWM1"
|
|
#define MICROPY_HW_PWM2_NAME "PWM2"
|
|
#define MICROPY_HW_PWM3_NAME "PWM3"
|
|
|
|
#define MICROPY_HW_USB_VID (0x2341)
|
|
#define MICROPY_HW_USB_PID (0x025A)
|
|
#define MICROPY_HW_USB_CDC_1200BPS_TOUCH (1)
|
|
|
|
void NANO33_board_early_init(void);
|
|
void NANO33_board_deinit(void);
|
|
void NANO33_board_enter_bootloader(void);
|