kopia lustrzana https://github.com/micropython/micropython
1747 wiersze
68 KiB
C
1747 wiersze
68 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32f4xx_adc.c
|
|
* @author MCD Application Team
|
|
* @version V1.3.0
|
|
* @date 08-November-2013
|
|
* @brief This file provides firmware functions to manage the following
|
|
* functionalities of the Analog to Digital Convertor (ADC) peripheral:
|
|
* + Initialization and Configuration (in addition to ADC multi mode
|
|
* selection)
|
|
* + Analog Watchdog configuration
|
|
* + Temperature Sensor & Vrefint (Voltage Reference internal) & VBAT
|
|
* management
|
|
* + Regular Channels Configuration
|
|
* + Regular Channels DMA Configuration
|
|
* + Injected channels Configuration
|
|
* + Interrupts and flags management
|
|
*
|
|
@verbatim
|
|
===============================================================================
|
|
##### How to use this driver #####
|
|
===============================================================================
|
|
[..]
|
|
(#) Enable the ADC interface clock using
|
|
RCC_APB2PeriphClockCmd(RCC_APB2Periph_ADCx, ENABLE);
|
|
|
|
(#) ADC pins configuration
|
|
(++) Enable the clock for the ADC GPIOs using the following function:
|
|
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOx, ENABLE);
|
|
(++) Configure these ADC pins in analog mode using GPIO_Init();
|
|
|
|
(#) Configure the ADC Prescaler, conversion resolution and data
|
|
alignment using the ADC_Init() function.
|
|
(#) Activate the ADC peripheral using ADC_Cmd() function.
|
|
|
|
*** Regular channels group configuration ***
|
|
============================================
|
|
[..]
|
|
(+) To configure the ADC regular channels group features, use
|
|
ADC_Init() and ADC_RegularChannelConfig() functions.
|
|
(+) To activate the continuous mode, use the ADC_continuousModeCmd()
|
|
function.
|
|
(+) To configurate and activate the Discontinuous mode, use the
|
|
ADC_DiscModeChannelCountConfig() and ADC_DiscModeCmd() functions.
|
|
(+) To read the ADC converted values, use the ADC_GetConversionValue()
|
|
function.
|
|
|
|
*** Multi mode ADCs Regular channels configuration ***
|
|
======================================================
|
|
[..]
|
|
(+) Refer to "Regular channels group configuration" description to
|
|
configure the ADC1, ADC2 and ADC3 regular channels.
|
|
(+) Select the Multi mode ADC regular channels features (dual or
|
|
triple mode) using ADC_CommonInit() function and configure
|
|
the DMA mode using ADC_MultiModeDMARequestAfterLastTransferCmd()
|
|
functions.
|
|
(+) Read the ADCs converted values using the
|
|
ADC_GetMultiModeConversionValue() function.
|
|
|
|
*** DMA for Regular channels group features configuration ***
|
|
=============================================================
|
|
[..]
|
|
(+) To enable the DMA mode for regular channels group, use the
|
|
ADC_DMACmd() function.
|
|
(+) To enable the generation of DMA requests continuously at the end
|
|
of the last DMA transfer, use the ADC_DMARequestAfterLastTransferCmd()
|
|
function.
|
|
|
|
*** Injected channels group configuration ***
|
|
=============================================
|
|
[..]
|
|
(+) To configure the ADC Injected channels group features, use
|
|
ADC_InjectedChannelConfig() and ADC_InjectedSequencerLengthConfig()
|
|
functions.
|
|
(+) To activate the continuous mode, use the ADC_continuousModeCmd()
|
|
function.
|
|
(+) To activate the Injected Discontinuous mode, use the
|
|
ADC_InjectedDiscModeCmd() function.
|
|
(+) To activate the AutoInjected mode, use the ADC_AutoInjectedConvCmd()
|
|
function.
|
|
(+) To read the ADC converted values, use the ADC_GetInjectedConversionValue()
|
|
function.
|
|
|
|
@endverbatim
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© COPYRIGHT 2013 STMicroelectronics</center></h2>
|
|
*
|
|
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
|
* You may not use this file except in compliance with the License.
|
|
* You may obtain a copy of the License at:
|
|
*
|
|
* http://www.st.com/software_license_agreement_liberty_v2
|
|
*
|
|
* Unless required by applicable law or agreed to in writing, software
|
|
* distributed under the License is distributed on an "AS IS" BASIS,
|
|
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
* See the License for the specific language governing permissions and
|
|
* limitations under the License.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32f4xx_adc.h"
|
|
#include "stm32f4xx_rcc.h"
|
|
#include "stm32f4xx_conf.h"
|
|
|
|
/** @addtogroup STM32F4xx_StdPeriph_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup ADC
|
|
* @brief ADC driver modules
|
|
* @{
|
|
*/
|
|
|
|
/* Private typedef -----------------------------------------------------------*/
|
|
/* Private define ------------------------------------------------------------*/
|
|
|
|
/* ADC DISCNUM mask */
|
|
#define CR1_DISCNUM_RESET ((uint32_t)0xFFFF1FFF)
|
|
|
|
/* ADC AWDCH mask */
|
|
#define CR1_AWDCH_RESET ((uint32_t)0xFFFFFFE0)
|
|
|
|
/* ADC Analog watchdog enable mode mask */
|
|
#define CR1_AWDMode_RESET ((uint32_t)0xFF3FFDFF)
|
|
|
|
/* CR1 register Mask */
|
|
#define CR1_CLEAR_MASK ((uint32_t)0xFCFFFEFF)
|
|
|
|
/* ADC EXTEN mask */
|
|
#define CR2_EXTEN_RESET ((uint32_t)0xCFFFFFFF)
|
|
|
|
/* ADC JEXTEN mask */
|
|
#define CR2_JEXTEN_RESET ((uint32_t)0xFFCFFFFF)
|
|
|
|
/* ADC JEXTSEL mask */
|
|
#define CR2_JEXTSEL_RESET ((uint32_t)0xFFF0FFFF)
|
|
|
|
/* CR2 register Mask */
|
|
#define CR2_CLEAR_MASK ((uint32_t)0xC0FFF7FD)
|
|
|
|
/* ADC SQx mask */
|
|
#define SQR3_SQ_SET ((uint32_t)0x0000001F)
|
|
#define SQR2_SQ_SET ((uint32_t)0x0000001F)
|
|
#define SQR1_SQ_SET ((uint32_t)0x0000001F)
|
|
|
|
/* ADC L Mask */
|
|
#define SQR1_L_RESET ((uint32_t)0xFF0FFFFF)
|
|
|
|
/* ADC JSQx mask */
|
|
#define JSQR_JSQ_SET ((uint32_t)0x0000001F)
|
|
|
|
/* ADC JL mask */
|
|
#define JSQR_JL_SET ((uint32_t)0x00300000)
|
|
#define JSQR_JL_RESET ((uint32_t)0xFFCFFFFF)
|
|
|
|
/* ADC SMPx mask */
|
|
#define SMPR1_SMP_SET ((uint32_t)0x00000007)
|
|
#define SMPR2_SMP_SET ((uint32_t)0x00000007)
|
|
|
|
/* ADC JDRx registers offset */
|
|
#define JDR_OFFSET ((uint8_t)0x28)
|
|
|
|
/* ADC CDR register base address */
|
|
#define CDR_ADDRESS ((uint32_t)0x40012308)
|
|
|
|
/* ADC CCR register Mask */
|
|
#define CR_CLEAR_MASK ((uint32_t)0xFFFC30E0)
|
|
|
|
/* Private macro -------------------------------------------------------------*/
|
|
/* Private variables ---------------------------------------------------------*/
|
|
/* Private function prototypes -----------------------------------------------*/
|
|
/* Private functions ---------------------------------------------------------*/
|
|
|
|
/** @defgroup ADC_Private_Functions
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup ADC_Group1 Initialization and Configuration functions
|
|
* @brief Initialization and Configuration functions
|
|
*
|
|
@verbatim
|
|
===============================================================================
|
|
##### Initialization and Configuration functions #####
|
|
===============================================================================
|
|
[..] This section provides functions allowing to:
|
|
(+) Initialize and configure the ADC Prescaler
|
|
(+) ADC Conversion Resolution (12bit..6bit)
|
|
(+) Scan Conversion Mode (multichannel or one channel) for regular group
|
|
(+) ADC Continuous Conversion Mode (Continuous or Single conversion) for
|
|
regular group
|
|
(+) External trigger Edge and source of regular group,
|
|
(+) Converted data alignment (left or right)
|
|
(+) The number of ADC conversions that will be done using the sequencer for
|
|
regular channel group
|
|
(+) Multi ADC mode selection
|
|
(+) Direct memory access mode selection for multi ADC mode
|
|
(+) Delay between 2 sampling phases (used in dual or triple interleaved modes)
|
|
(+) Enable or disable the ADC peripheral
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Deinitializes all ADCs peripherals registers to their default reset
|
|
* values.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
void ADC_DeInit(void)
|
|
{
|
|
/* Enable all ADCs reset state */
|
|
RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC, ENABLE);
|
|
|
|
/* Release all ADCs from reset state */
|
|
RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC, DISABLE);
|
|
}
|
|
|
|
/**
|
|
* @brief Initializes the ADCx peripheral according to the specified parameters
|
|
* in the ADC_InitStruct.
|
|
* @note This function is used to configure the global features of the ADC (
|
|
* Resolution and Data Alignment), however, the rest of the configuration
|
|
* parameters are specific to the regular channels group (scan mode
|
|
* activation, continuous mode activation, External trigger source and
|
|
* edge, number of conversion in the regular channels group sequencer).
|
|
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
|
|
* @param ADC_InitStruct: pointer to an ADC_InitTypeDef structure that contains
|
|
* the configuration information for the specified ADC peripheral.
|
|
* @retval None
|
|
*/
|
|
void ADC_Init(ADC_TypeDef* ADCx, ADC_InitTypeDef* ADC_InitStruct)
|
|
{
|
|
uint32_t tmpreg1 = 0;
|
|
uint8_t tmpreg2 = 0;
|
|
/* Check the parameters */
|
|
assert_param(IS_ADC_ALL_PERIPH(ADCx));
|
|
assert_param(IS_ADC_RESOLUTION(ADC_InitStruct->ADC_Resolution));
|
|
assert_param(IS_FUNCTIONAL_STATE(ADC_InitStruct->ADC_ScanConvMode));
|
|
assert_param(IS_FUNCTIONAL_STATE(ADC_InitStruct->ADC_ContinuousConvMode));
|
|
assert_param(IS_ADC_EXT_TRIG_EDGE(ADC_InitStruct->ADC_ExternalTrigConvEdge));
|
|
assert_param(IS_ADC_EXT_TRIG(ADC_InitStruct->ADC_ExternalTrigConv));
|
|
assert_param(IS_ADC_DATA_ALIGN(ADC_InitStruct->ADC_DataAlign));
|
|
assert_param(IS_ADC_REGULAR_LENGTH(ADC_InitStruct->ADC_NbrOfConversion));
|
|
|
|
/*---------------------------- ADCx CR1 Configuration -----------------*/
|
|
/* Get the ADCx CR1 value */
|
|
tmpreg1 = ADCx->CR1;
|
|
|
|
/* Clear RES and SCAN bits */
|
|
tmpreg1 &= CR1_CLEAR_MASK;
|
|
|
|
/* Configure ADCx: scan conversion mode and resolution */
|
|
/* Set SCAN bit according to ADC_ScanConvMode value */
|
|
/* Set RES bit according to ADC_Resolution value */
|
|
tmpreg1 |= (uint32_t)(((uint32_t)ADC_InitStruct->ADC_ScanConvMode << 8) | \
|
|
ADC_InitStruct->ADC_Resolution);
|
|
/* Write to ADCx CR1 */
|
|
ADCx->CR1 = tmpreg1;
|
|
/*---------------------------- ADCx CR2 Configuration -----------------*/
|
|
/* Get the ADCx CR2 value */
|
|
tmpreg1 = ADCx->CR2;
|
|
|
|
/* Clear CONT, ALIGN, EXTEN and EXTSEL bits */
|
|
tmpreg1 &= CR2_CLEAR_MASK;
|
|
|
|
/* Configure ADCx: external trigger event and edge, data alignment and
|
|
continuous conversion mode */
|
|
/* Set ALIGN bit according to ADC_DataAlign value */
|
|
/* Set EXTEN bits according to ADC_ExternalTrigConvEdge value */
|
|
/* Set EXTSEL bits according to ADC_ExternalTrigConv value */
|
|
/* Set CONT bit according to ADC_ContinuousConvMode value */
|
|
tmpreg1 |= (uint32_t)(ADC_InitStruct->ADC_DataAlign | \
|
|
ADC_InitStruct->ADC_ExternalTrigConv |
|
|
ADC_InitStruct->ADC_ExternalTrigConvEdge | \
|
|
((uint32_t)ADC_InitStruct->ADC_ContinuousConvMode << 1));
|
|
|
|
/* Write to ADCx CR2 */
|
|
ADCx->CR2 = tmpreg1;
|
|
/*---------------------------- ADCx SQR1 Configuration -----------------*/
|
|
/* Get the ADCx SQR1 value */
|
|
tmpreg1 = ADCx->SQR1;
|
|
|
|
/* Clear L bits */
|
|
tmpreg1 &= SQR1_L_RESET;
|
|
|
|
/* Configure ADCx: regular channel sequence length */
|
|
/* Set L bits according to ADC_NbrOfConversion value */
|
|
tmpreg2 |= (uint8_t)(ADC_InitStruct->ADC_NbrOfConversion - (uint8_t)1);
|
|
tmpreg1 |= ((uint32_t)tmpreg2 << 20);
|
|
|
|
/* Write to ADCx SQR1 */
|
|
ADCx->SQR1 = tmpreg1;
|
|
}
|
|
|
|
/**
|
|
* @brief Fills each ADC_InitStruct member with its default value.
|
|
* @note This function is used to initialize the global features of the ADC (
|
|
* Resolution and Data Alignment), however, the rest of the configuration
|
|
* parameters are specific to the regular channels group (scan mode
|
|
* activation, continuous mode activation, External trigger source and
|
|
* edge, number of conversion in the regular channels group sequencer).
|
|
* @param ADC_InitStruct: pointer to an ADC_InitTypeDef structure which will
|
|
* be initialized.
|
|
* @retval None
|
|
*/
|
|
void ADC_StructInit(ADC_InitTypeDef* ADC_InitStruct)
|
|
{
|
|
/* Initialize the ADC_Mode member */
|
|
ADC_InitStruct->ADC_Resolution = ADC_Resolution_12b;
|
|
|
|
/* initialize the ADC_ScanConvMode member */
|
|
ADC_InitStruct->ADC_ScanConvMode = DISABLE;
|
|
|
|
/* Initialize the ADC_ContinuousConvMode member */
|
|
ADC_InitStruct->ADC_ContinuousConvMode = DISABLE;
|
|
|
|
/* Initialize the ADC_ExternalTrigConvEdge member */
|
|
ADC_InitStruct->ADC_ExternalTrigConvEdge = ADC_ExternalTrigConvEdge_None;
|
|
|
|
/* Initialize the ADC_ExternalTrigConv member */
|
|
ADC_InitStruct->ADC_ExternalTrigConv = ADC_ExternalTrigConv_T1_CC1;
|
|
|
|
/* Initialize the ADC_DataAlign member */
|
|
ADC_InitStruct->ADC_DataAlign = ADC_DataAlign_Right;
|
|
|
|
/* Initialize the ADC_NbrOfConversion member */
|
|
ADC_InitStruct->ADC_NbrOfConversion = 1;
|
|
}
|
|
|
|
/**
|
|
* @brief Initializes the ADCs peripherals according to the specified parameters
|
|
* in the ADC_CommonInitStruct.
|
|
* @param ADC_CommonInitStruct: pointer to an ADC_CommonInitTypeDef structure
|
|
* that contains the configuration information for All ADCs peripherals.
|
|
* @retval None
|
|
*/
|
|
void ADC_CommonInit(ADC_CommonInitTypeDef* ADC_CommonInitStruct)
|
|
{
|
|
uint32_t tmpreg1 = 0;
|
|
/* Check the parameters */
|
|
assert_param(IS_ADC_MODE(ADC_CommonInitStruct->ADC_Mode));
|
|
assert_param(IS_ADC_PRESCALER(ADC_CommonInitStruct->ADC_Prescaler));
|
|
assert_param(IS_ADC_DMA_ACCESS_MODE(ADC_CommonInitStruct->ADC_DMAAccessMode));
|
|
assert_param(IS_ADC_SAMPLING_DELAY(ADC_CommonInitStruct->ADC_TwoSamplingDelay));
|
|
/*---------------------------- ADC CCR Configuration -----------------*/
|
|
/* Get the ADC CCR value */
|
|
tmpreg1 = ADC->CCR;
|
|
|
|
/* Clear MULTI, DELAY, DMA and ADCPRE bits */
|
|
tmpreg1 &= CR_CLEAR_MASK;
|
|
|
|
/* Configure ADCx: Multi mode, Delay between two sampling time, ADC prescaler,
|
|
and DMA access mode for multimode */
|
|
/* Set MULTI bits according to ADC_Mode value */
|
|
/* Set ADCPRE bits according to ADC_Prescaler value */
|
|
/* Set DMA bits according to ADC_DMAAccessMode value */
|
|
/* Set DELAY bits according to ADC_TwoSamplingDelay value */
|
|
tmpreg1 |= (uint32_t)(ADC_CommonInitStruct->ADC_Mode |
|
|
ADC_CommonInitStruct->ADC_Prescaler |
|
|
ADC_CommonInitStruct->ADC_DMAAccessMode |
|
|
ADC_CommonInitStruct->ADC_TwoSamplingDelay);
|
|
|
|
/* Write to ADC CCR */
|
|
ADC->CCR = tmpreg1;
|
|
}
|
|
|
|
/**
|
|
* @brief Fills each ADC_CommonInitStruct member with its default value.
|
|
* @param ADC_CommonInitStruct: pointer to an ADC_CommonInitTypeDef structure
|
|
* which will be initialized.
|
|
* @retval None
|
|
*/
|
|
void ADC_CommonStructInit(ADC_CommonInitTypeDef* ADC_CommonInitStruct)
|
|
{
|
|
/* Initialize the ADC_Mode member */
|
|
ADC_CommonInitStruct->ADC_Mode = ADC_Mode_Independent;
|
|
|
|
/* initialize the ADC_Prescaler member */
|
|
ADC_CommonInitStruct->ADC_Prescaler = ADC_Prescaler_Div2;
|
|
|
|
/* Initialize the ADC_DMAAccessMode member */
|
|
ADC_CommonInitStruct->ADC_DMAAccessMode = ADC_DMAAccessMode_Disabled;
|
|
|
|
/* Initialize the ADC_TwoSamplingDelay member */
|
|
ADC_CommonInitStruct->ADC_TwoSamplingDelay = ADC_TwoSamplingDelay_5Cycles;
|
|
}
|
|
|
|
/**
|
|
* @brief Enables or disables the specified ADC peripheral.
|
|
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
|
|
* @param NewState: new state of the ADCx peripheral.
|
|
* This parameter can be: ENABLE or DISABLE.
|
|
* @retval None
|
|
*/
|
|
void ADC_Cmd(ADC_TypeDef* ADCx, FunctionalState NewState)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_ADC_ALL_PERIPH(ADCx));
|
|
assert_param(IS_FUNCTIONAL_STATE(NewState));
|
|
if (NewState != DISABLE)
|
|
{
|
|
/* Set the ADON bit to wake up the ADC from power down mode */
|
|
ADCx->CR2 |= (uint32_t)ADC_CR2_ADON;
|
|
}
|
|
else
|
|
{
|
|
/* Disable the selected ADC peripheral */
|
|
ADCx->CR2 &= (uint32_t)(~ADC_CR2_ADON);
|
|
}
|
|
}
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup ADC_Group2 Analog Watchdog configuration functions
|
|
* @brief Analog Watchdog configuration functions
|
|
*
|
|
@verbatim
|
|
===============================================================================
|
|
##### Analog Watchdog configuration functions #####
|
|
===============================================================================
|
|
[..] This section provides functions allowing to configure the Analog Watchdog
|
|
(AWD) feature in the ADC.
|
|
|
|
[..] A typical configuration Analog Watchdog is done following these steps :
|
|
(#) the ADC guarded channel(s) is (are) selected using the
|
|
ADC_AnalogWatchdogSingleChannelConfig() function.
|
|
(#) The Analog watchdog lower and higher threshold are configured using the
|
|
ADC_AnalogWatchdogThresholdsConfig() function.
|
|
(#) The Analog watchdog is enabled and configured to enable the check, on one
|
|
or more channels, using the ADC_AnalogWatchdogCmd() function.
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Enables or disables the analog watchdog on single/all regular or
|
|
* injected channels
|
|
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
|
|
* @param ADC_AnalogWatchdog: the ADC analog watchdog configuration.
|
|
* This parameter can be one of the following values:
|
|
* @arg ADC_AnalogWatchdog_SingleRegEnable: Analog watchdog on a single regular channel
|
|
* @arg ADC_AnalogWatchdog_SingleInjecEnable: Analog watchdog on a single injected channel
|
|
* @arg ADC_AnalogWatchdog_SingleRegOrInjecEnable: Analog watchdog on a single regular or injected channel
|
|
* @arg ADC_AnalogWatchdog_AllRegEnable: Analog watchdog on all regular channel
|
|
* @arg ADC_AnalogWatchdog_AllInjecEnable: Analog watchdog on all injected channel
|
|
* @arg ADC_AnalogWatchdog_AllRegAllInjecEnable: Analog watchdog on all regular and injected channels
|
|
* @arg ADC_AnalogWatchdog_None: No channel guarded by the analog watchdog
|
|
* @retval None
|
|
*/
|
|
void ADC_AnalogWatchdogCmd(ADC_TypeDef* ADCx, uint32_t ADC_AnalogWatchdog)
|
|
{
|
|
uint32_t tmpreg = 0;
|
|
/* Check the parameters */
|
|
assert_param(IS_ADC_ALL_PERIPH(ADCx));
|
|
assert_param(IS_ADC_ANALOG_WATCHDOG(ADC_AnalogWatchdog));
|
|
|
|
/* Get the old register value */
|
|
tmpreg = ADCx->CR1;
|
|
|
|
/* Clear AWDEN, JAWDEN and AWDSGL bits */
|
|
tmpreg &= CR1_AWDMode_RESET;
|
|
|
|
/* Set the analog watchdog enable mode */
|
|
tmpreg |= ADC_AnalogWatchdog;
|
|
|
|
/* Store the new register value */
|
|
ADCx->CR1 = tmpreg;
|
|
}
|
|
|
|
/**
|
|
* @brief Configures the high and low thresholds of the analog watchdog.
|
|
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
|
|
* @param HighThreshold: the ADC analog watchdog High threshold value.
|
|
* This parameter must be a 12-bit value.
|
|
* @param LowThreshold: the ADC analog watchdog Low threshold value.
|
|
* This parameter must be a 12-bit value.
|
|
* @retval None
|
|
*/
|
|
void ADC_AnalogWatchdogThresholdsConfig(ADC_TypeDef* ADCx, uint16_t HighThreshold,
|
|
uint16_t LowThreshold)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_ADC_ALL_PERIPH(ADCx));
|
|
assert_param(IS_ADC_THRESHOLD(HighThreshold));
|
|
assert_param(IS_ADC_THRESHOLD(LowThreshold));
|
|
|
|
/* Set the ADCx high threshold */
|
|
ADCx->HTR = HighThreshold;
|
|
|
|
/* Set the ADCx low threshold */
|
|
ADCx->LTR = LowThreshold;
|
|
}
|
|
|
|
/**
|
|
* @brief Configures the analog watchdog guarded single channel
|
|
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
|
|
* @param ADC_Channel: the ADC channel to configure for the analog watchdog.
|
|
* This parameter can be one of the following values:
|
|
* @arg ADC_Channel_0: ADC Channel0 selected
|
|
* @arg ADC_Channel_1: ADC Channel1 selected
|
|
* @arg ADC_Channel_2: ADC Channel2 selected
|
|
* @arg ADC_Channel_3: ADC Channel3 selected
|
|
* @arg ADC_Channel_4: ADC Channel4 selected
|
|
* @arg ADC_Channel_5: ADC Channel5 selected
|
|
* @arg ADC_Channel_6: ADC Channel6 selected
|
|
* @arg ADC_Channel_7: ADC Channel7 selected
|
|
* @arg ADC_Channel_8: ADC Channel8 selected
|
|
* @arg ADC_Channel_9: ADC Channel9 selected
|
|
* @arg ADC_Channel_10: ADC Channel10 selected
|
|
* @arg ADC_Channel_11: ADC Channel11 selected
|
|
* @arg ADC_Channel_12: ADC Channel12 selected
|
|
* @arg ADC_Channel_13: ADC Channel13 selected
|
|
* @arg ADC_Channel_14: ADC Channel14 selected
|
|
* @arg ADC_Channel_15: ADC Channel15 selected
|
|
* @arg ADC_Channel_16: ADC Channel16 selected
|
|
* @arg ADC_Channel_17: ADC Channel17 selected
|
|
* @arg ADC_Channel_18: ADC Channel18 selected
|
|
* @retval None
|
|
*/
|
|
void ADC_AnalogWatchdogSingleChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel)
|
|
{
|
|
uint32_t tmpreg = 0;
|
|
/* Check the parameters */
|
|
assert_param(IS_ADC_ALL_PERIPH(ADCx));
|
|
assert_param(IS_ADC_CHANNEL(ADC_Channel));
|
|
|
|
/* Get the old register value */
|
|
tmpreg = ADCx->CR1;
|
|
|
|
/* Clear the Analog watchdog channel select bits */
|
|
tmpreg &= CR1_AWDCH_RESET;
|
|
|
|
/* Set the Analog watchdog channel */
|
|
tmpreg |= ADC_Channel;
|
|
|
|
/* Store the new register value */
|
|
ADCx->CR1 = tmpreg;
|
|
}
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup ADC_Group3 Temperature Sensor, Vrefint (Voltage Reference internal)
|
|
* and VBAT (Voltage BATtery) management functions
|
|
* @brief Temperature Sensor, Vrefint and VBAT management functions
|
|
*
|
|
@verbatim
|
|
===============================================================================
|
|
##### Temperature Sensor, Vrefint and VBAT management functions #####
|
|
===============================================================================
|
|
[..] This section provides functions allowing to enable/ disable the internal
|
|
connections between the ADC and the Temperature Sensor, the Vrefint and
|
|
the Vbat sources.
|
|
|
|
[..] A typical configuration to get the Temperature sensor and Vrefint channels
|
|
voltages is done following these steps :
|
|
(#) Enable the internal connection of Temperature sensor and Vrefint sources
|
|
with the ADC channels using ADC_TempSensorVrefintCmd() function.
|
|
(#) Select the ADC_Channel_TempSensor and/or ADC_Channel_Vrefint using
|
|
ADC_RegularChannelConfig() or ADC_InjectedChannelConfig() functions
|
|
(#) Get the voltage values, using ADC_GetConversionValue() or
|
|
ADC_GetInjectedConversionValue().
|
|
|
|
[..] A typical configuration to get the VBAT channel voltage is done following
|
|
these steps :
|
|
(#) Enable the internal connection of VBAT source with the ADC channel using
|
|
ADC_VBATCmd() function.
|
|
(#) Select the ADC_Channel_Vbat using ADC_RegularChannelConfig() or
|
|
ADC_InjectedChannelConfig() functions
|
|
(#) Get the voltage value, using ADC_GetConversionValue() or
|
|
ADC_GetInjectedConversionValue().
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
|
|
/**
|
|
* @brief Enables or disables the temperature sensor and Vrefint channels.
|
|
* @param NewState: new state of the temperature sensor and Vrefint channels.
|
|
* This parameter can be: ENABLE or DISABLE.
|
|
* @retval None
|
|
*/
|
|
void ADC_TempSensorVrefintCmd(FunctionalState NewState)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_FUNCTIONAL_STATE(NewState));
|
|
if (NewState != DISABLE)
|
|
{
|
|
/* Enable the temperature sensor and Vrefint channel*/
|
|
ADC->CCR |= (uint32_t)ADC_CCR_TSVREFE;
|
|
}
|
|
else
|
|
{
|
|
/* Disable the temperature sensor and Vrefint channel*/
|
|
ADC->CCR &= (uint32_t)(~ADC_CCR_TSVREFE);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Enables or disables the VBAT (Voltage Battery) channel.
|
|
*
|
|
* @note the Battery voltage measured is equal to VBAT/2 on STM32F40xx and
|
|
* STM32F41xx devices and equal to VBAT/4 on STM32F42xx and STM32F43xx devices
|
|
*
|
|
* @param NewState: new state of the VBAT channel.
|
|
* This parameter can be: ENABLE or DISABLE.
|
|
* @retval None
|
|
*/
|
|
void ADC_VBATCmd(FunctionalState NewState)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_FUNCTIONAL_STATE(NewState));
|
|
if (NewState != DISABLE)
|
|
{
|
|
/* Enable the VBAT channel*/
|
|
ADC->CCR |= (uint32_t)ADC_CCR_VBATE;
|
|
}
|
|
else
|
|
{
|
|
/* Disable the VBAT channel*/
|
|
ADC->CCR &= (uint32_t)(~ADC_CCR_VBATE);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup ADC_Group4 Regular Channels Configuration functions
|
|
* @brief Regular Channels Configuration functions
|
|
*
|
|
@verbatim
|
|
===============================================================================
|
|
##### Regular Channels Configuration functions #####
|
|
===============================================================================
|
|
|
|
[..] This section provides functions allowing to manage the ADC's regular channels,
|
|
it is composed of 2 sub sections :
|
|
|
|
(#) Configuration and management functions for regular channels: This subsection
|
|
provides functions allowing to configure the ADC regular channels :
|
|
(++) Configure the rank in the regular group sequencer for each channel
|
|
(++) Configure the sampling time for each channel
|
|
(++) select the conversion Trigger for regular channels
|
|
(++) select the desired EOC event behavior configuration
|
|
(++) Activate the continuous Mode (*)
|
|
(++) Activate the Discontinuous Mode
|
|
-@@- Please Note that the following features for regular channels
|
|
are configurated using the ADC_Init() function :
|
|
(+@@) scan mode activation
|
|
(+@@) continuous mode activation (**)
|
|
(+@@) External trigger source
|
|
(+@@) External trigger edge
|
|
(+@@) number of conversion in the regular channels group sequencer.
|
|
|
|
-@@- (*) and (**) are performing the same configuration
|
|
|
|
(#) Get the conversion data: This subsection provides an important function in
|
|
the ADC peripheral since it returns the converted data of the current
|
|
regular channel. When the Conversion value is read, the EOC Flag is
|
|
automatically cleared.
|
|
|
|
-@- For multi ADC mode, the last ADC1, ADC2 and ADC3 regular conversions
|
|
results data (in the selected multi mode) can be returned in the same
|
|
time using ADC_GetMultiModeConversionValue() function.
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
/**
|
|
* @brief Configures for the selected ADC regular channel its corresponding
|
|
* rank in the sequencer and its sample time.
|
|
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
|
|
* @param ADC_Channel: the ADC channel to configure.
|
|
* This parameter can be one of the following values:
|
|
* @arg ADC_Channel_0: ADC Channel0 selected
|
|
* @arg ADC_Channel_1: ADC Channel1 selected
|
|
* @arg ADC_Channel_2: ADC Channel2 selected
|
|
* @arg ADC_Channel_3: ADC Channel3 selected
|
|
* @arg ADC_Channel_4: ADC Channel4 selected
|
|
* @arg ADC_Channel_5: ADC Channel5 selected
|
|
* @arg ADC_Channel_6: ADC Channel6 selected
|
|
* @arg ADC_Channel_7: ADC Channel7 selected
|
|
* @arg ADC_Channel_8: ADC Channel8 selected
|
|
* @arg ADC_Channel_9: ADC Channel9 selected
|
|
* @arg ADC_Channel_10: ADC Channel10 selected
|
|
* @arg ADC_Channel_11: ADC Channel11 selected
|
|
* @arg ADC_Channel_12: ADC Channel12 selected
|
|
* @arg ADC_Channel_13: ADC Channel13 selected
|
|
* @arg ADC_Channel_14: ADC Channel14 selected
|
|
* @arg ADC_Channel_15: ADC Channel15 selected
|
|
* @arg ADC_Channel_16: ADC Channel16 selected
|
|
* @arg ADC_Channel_17: ADC Channel17 selected
|
|
* @arg ADC_Channel_18: ADC Channel18 selected
|
|
* @param Rank: The rank in the regular group sequencer.
|
|
* This parameter must be between 1 to 16.
|
|
* @param ADC_SampleTime: The sample time value to be set for the selected channel.
|
|
* This parameter can be one of the following values:
|
|
* @arg ADC_SampleTime_3Cycles: Sample time equal to 3 cycles
|
|
* @arg ADC_SampleTime_15Cycles: Sample time equal to 15 cycles
|
|
* @arg ADC_SampleTime_28Cycles: Sample time equal to 28 cycles
|
|
* @arg ADC_SampleTime_56Cycles: Sample time equal to 56 cycles
|
|
* @arg ADC_SampleTime_84Cycles: Sample time equal to 84 cycles
|
|
* @arg ADC_SampleTime_112Cycles: Sample time equal to 112 cycles
|
|
* @arg ADC_SampleTime_144Cycles: Sample time equal to 144 cycles
|
|
* @arg ADC_SampleTime_480Cycles: Sample time equal to 480 cycles
|
|
* @retval None
|
|
*/
|
|
void ADC_RegularChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime)
|
|
{
|
|
uint32_t tmpreg1 = 0, tmpreg2 = 0;
|
|
/* Check the parameters */
|
|
assert_param(IS_ADC_ALL_PERIPH(ADCx));
|
|
assert_param(IS_ADC_CHANNEL(ADC_Channel));
|
|
assert_param(IS_ADC_REGULAR_RANK(Rank));
|
|
assert_param(IS_ADC_SAMPLE_TIME(ADC_SampleTime));
|
|
|
|
/* if ADC_Channel_10 ... ADC_Channel_18 is selected */
|
|
if (ADC_Channel > ADC_Channel_9)
|
|
{
|
|
/* Get the old register value */
|
|
tmpreg1 = ADCx->SMPR1;
|
|
|
|
/* Calculate the mask to clear */
|
|
tmpreg2 = SMPR1_SMP_SET << (3 * (ADC_Channel - 10));
|
|
|
|
/* Clear the old sample time */
|
|
tmpreg1 &= ~tmpreg2;
|
|
|
|
/* Calculate the mask to set */
|
|
tmpreg2 = (uint32_t)ADC_SampleTime << (3 * (ADC_Channel - 10));
|
|
|
|
/* Set the new sample time */
|
|
tmpreg1 |= tmpreg2;
|
|
|
|
/* Store the new register value */
|
|
ADCx->SMPR1 = tmpreg1;
|
|
}
|
|
else /* ADC_Channel include in ADC_Channel_[0..9] */
|
|
{
|
|
/* Get the old register value */
|
|
tmpreg1 = ADCx->SMPR2;
|
|
|
|
/* Calculate the mask to clear */
|
|
tmpreg2 = SMPR2_SMP_SET << (3 * ADC_Channel);
|
|
|
|
/* Clear the old sample time */
|
|
tmpreg1 &= ~tmpreg2;
|
|
|
|
/* Calculate the mask to set */
|
|
tmpreg2 = (uint32_t)ADC_SampleTime << (3 * ADC_Channel);
|
|
|
|
/* Set the new sample time */
|
|
tmpreg1 |= tmpreg2;
|
|
|
|
/* Store the new register value */
|
|
ADCx->SMPR2 = tmpreg1;
|
|
}
|
|
/* For Rank 1 to 6 */
|
|
if (Rank < 7)
|
|
{
|
|
/* Get the old register value */
|
|
tmpreg1 = ADCx->SQR3;
|
|
|
|
/* Calculate the mask to clear */
|
|
tmpreg2 = SQR3_SQ_SET << (5 * (Rank - 1));
|
|
|
|
/* Clear the old SQx bits for the selected rank */
|
|
tmpreg1 &= ~tmpreg2;
|
|
|
|
/* Calculate the mask to set */
|
|
tmpreg2 = (uint32_t)ADC_Channel << (5 * (Rank - 1));
|
|
|
|
/* Set the SQx bits for the selected rank */
|
|
tmpreg1 |= tmpreg2;
|
|
|
|
/* Store the new register value */
|
|
ADCx->SQR3 = tmpreg1;
|
|
}
|
|
/* For Rank 7 to 12 */
|
|
else if (Rank < 13)
|
|
{
|
|
/* Get the old register value */
|
|
tmpreg1 = ADCx->SQR2;
|
|
|
|
/* Calculate the mask to clear */
|
|
tmpreg2 = SQR2_SQ_SET << (5 * (Rank - 7));
|
|
|
|
/* Clear the old SQx bits for the selected rank */
|
|
tmpreg1 &= ~tmpreg2;
|
|
|
|
/* Calculate the mask to set */
|
|
tmpreg2 = (uint32_t)ADC_Channel << (5 * (Rank - 7));
|
|
|
|
/* Set the SQx bits for the selected rank */
|
|
tmpreg1 |= tmpreg2;
|
|
|
|
/* Store the new register value */
|
|
ADCx->SQR2 = tmpreg1;
|
|
}
|
|
/* For Rank 13 to 16 */
|
|
else
|
|
{
|
|
/* Get the old register value */
|
|
tmpreg1 = ADCx->SQR1;
|
|
|
|
/* Calculate the mask to clear */
|
|
tmpreg2 = SQR1_SQ_SET << (5 * (Rank - 13));
|
|
|
|
/* Clear the old SQx bits for the selected rank */
|
|
tmpreg1 &= ~tmpreg2;
|
|
|
|
/* Calculate the mask to set */
|
|
tmpreg2 = (uint32_t)ADC_Channel << (5 * (Rank - 13));
|
|
|
|
/* Set the SQx bits for the selected rank */
|
|
tmpreg1 |= tmpreg2;
|
|
|
|
/* Store the new register value */
|
|
ADCx->SQR1 = tmpreg1;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Enables the selected ADC software start conversion of the regular channels.
|
|
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
|
|
* @retval None
|
|
*/
|
|
void ADC_SoftwareStartConv(ADC_TypeDef* ADCx)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_ADC_ALL_PERIPH(ADCx));
|
|
|
|
/* Enable the selected ADC conversion for regular group */
|
|
ADCx->CR2 |= (uint32_t)ADC_CR2_SWSTART;
|
|
}
|
|
|
|
/**
|
|
* @brief Gets the selected ADC Software start regular conversion Status.
|
|
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
|
|
* @retval The new state of ADC software start conversion (SET or RESET).
|
|
*/
|
|
FlagStatus ADC_GetSoftwareStartConvStatus(ADC_TypeDef* ADCx)
|
|
{
|
|
FlagStatus bitstatus = RESET;
|
|
/* Check the parameters */
|
|
assert_param(IS_ADC_ALL_PERIPH(ADCx));
|
|
|
|
/* Check the status of SWSTART bit */
|
|
if ((ADCx->CR2 & ADC_CR2_SWSTART) != (uint32_t)RESET)
|
|
{
|
|
/* SWSTART bit is set */
|
|
bitstatus = SET;
|
|
}
|
|
else
|
|
{
|
|
/* SWSTART bit is reset */
|
|
bitstatus = RESET;
|
|
}
|
|
|
|
/* Return the SWSTART bit status */
|
|
return bitstatus;
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief Enables or disables the EOC on each regular channel conversion
|
|
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
|
|
* @param NewState: new state of the selected ADC EOC flag rising
|
|
* This parameter can be: ENABLE or DISABLE.
|
|
* @retval None
|
|
*/
|
|
void ADC_EOCOnEachRegularChannelCmd(ADC_TypeDef* ADCx, FunctionalState NewState)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_ADC_ALL_PERIPH(ADCx));
|
|
assert_param(IS_FUNCTIONAL_STATE(NewState));
|
|
|
|
if (NewState != DISABLE)
|
|
{
|
|
/* Enable the selected ADC EOC rising on each regular channel conversion */
|
|
ADCx->CR2 |= (uint32_t)ADC_CR2_EOCS;
|
|
}
|
|
else
|
|
{
|
|
/* Disable the selected ADC EOC rising on each regular channel conversion */
|
|
ADCx->CR2 &= (uint32_t)(~ADC_CR2_EOCS);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Enables or disables the ADC continuous conversion mode
|
|
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
|
|
* @param NewState: new state of the selected ADC continuous conversion mode
|
|
* This parameter can be: ENABLE or DISABLE.
|
|
* @retval None
|
|
*/
|
|
void ADC_ContinuousModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_ADC_ALL_PERIPH(ADCx));
|
|
assert_param(IS_FUNCTIONAL_STATE(NewState));
|
|
|
|
if (NewState != DISABLE)
|
|
{
|
|
/* Enable the selected ADC continuous conversion mode */
|
|
ADCx->CR2 |= (uint32_t)ADC_CR2_CONT;
|
|
}
|
|
else
|
|
{
|
|
/* Disable the selected ADC continuous conversion mode */
|
|
ADCx->CR2 &= (uint32_t)(~ADC_CR2_CONT);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Configures the discontinuous mode for the selected ADC regular group
|
|
* channel.
|
|
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
|
|
* @param Number: specifies the discontinuous mode regular channel count value.
|
|
* This number must be between 1 and 8.
|
|
* @retval None
|
|
*/
|
|
void ADC_DiscModeChannelCountConfig(ADC_TypeDef* ADCx, uint8_t Number)
|
|
{
|
|
uint32_t tmpreg1 = 0;
|
|
uint32_t tmpreg2 = 0;
|
|
|
|
/* Check the parameters */
|
|
assert_param(IS_ADC_ALL_PERIPH(ADCx));
|
|
assert_param(IS_ADC_REGULAR_DISC_NUMBER(Number));
|
|
|
|
/* Get the old register value */
|
|
tmpreg1 = ADCx->CR1;
|
|
|
|
/* Clear the old discontinuous mode channel count */
|
|
tmpreg1 &= CR1_DISCNUM_RESET;
|
|
|
|
/* Set the discontinuous mode channel count */
|
|
tmpreg2 = Number - 1;
|
|
tmpreg1 |= tmpreg2 << 13;
|
|
|
|
/* Store the new register value */
|
|
ADCx->CR1 = tmpreg1;
|
|
}
|
|
|
|
/**
|
|
* @brief Enables or disables the discontinuous mode on regular group channel
|
|
* for the specified ADC
|
|
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
|
|
* @param NewState: new state of the selected ADC discontinuous mode on
|
|
* regular group channel.
|
|
* This parameter can be: ENABLE or DISABLE.
|
|
* @retval None
|
|
*/
|
|
void ADC_DiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_ADC_ALL_PERIPH(ADCx));
|
|
assert_param(IS_FUNCTIONAL_STATE(NewState));
|
|
|
|
if (NewState != DISABLE)
|
|
{
|
|
/* Enable the selected ADC regular discontinuous mode */
|
|
ADCx->CR1 |= (uint32_t)ADC_CR1_DISCEN;
|
|
}
|
|
else
|
|
{
|
|
/* Disable the selected ADC regular discontinuous mode */
|
|
ADCx->CR1 &= (uint32_t)(~ADC_CR1_DISCEN);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Returns the last ADCx conversion result data for regular channel.
|
|
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
|
|
* @retval The Data conversion value.
|
|
*/
|
|
uint16_t ADC_GetConversionValue(ADC_TypeDef* ADCx)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_ADC_ALL_PERIPH(ADCx));
|
|
|
|
/* Return the selected ADC conversion value */
|
|
return (uint16_t) ADCx->DR;
|
|
}
|
|
|
|
/**
|
|
* @brief Returns the last ADC1, ADC2 and ADC3 regular conversions results
|
|
* data in the selected multi mode.
|
|
* @param None
|
|
* @retval The Data conversion value.
|
|
* @note In dual mode, the value returned by this function is as following
|
|
* Data[15:0] : these bits contain the regular data of ADC1.
|
|
* Data[31:16]: these bits contain the regular data of ADC2.
|
|
* @note In triple mode, the value returned by this function is as following
|
|
* Data[15:0] : these bits contain alternatively the regular data of ADC1, ADC3 and ADC2.
|
|
* Data[31:16]: these bits contain alternatively the regular data of ADC2, ADC1 and ADC3.
|
|
*/
|
|
uint32_t ADC_GetMultiModeConversionValue(void)
|
|
{
|
|
/* Return the multi mode conversion value */
|
|
return (*(__IO uint32_t *) CDR_ADDRESS);
|
|
}
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup ADC_Group5 Regular Channels DMA Configuration functions
|
|
* @brief Regular Channels DMA Configuration functions
|
|
*
|
|
@verbatim
|
|
===============================================================================
|
|
##### Regular Channels DMA Configuration functions #####
|
|
===============================================================================
|
|
[..] This section provides functions allowing to configure the DMA for ADC
|
|
regular channels.
|
|
Since converted regular channel values are stored into a unique data
|
|
register, it is useful to use DMA for conversion of more than one regular
|
|
channel. This avoids the loss of the data already stored in the ADC
|
|
Data register.
|
|
When the DMA mode is enabled (using the ADC_DMACmd() function), after each
|
|
conversion of a regular channel, a DMA request is generated.
|
|
[..] Depending on the "DMA disable selection for Independent ADC mode"
|
|
configuration (using the ADC_DMARequestAfterLastTransferCmd() function),
|
|
at the end of the last DMA transfer, two possibilities are allowed:
|
|
(+) No new DMA request is issued to the DMA controller (feature DISABLED)
|
|
(+) Requests can continue to be generated (feature ENABLED).
|
|
[..] Depending on the "DMA disable selection for multi ADC mode" configuration
|
|
(using the void ADC_MultiModeDMARequestAfterLastTransferCmd() function),
|
|
at the end of the last DMA transfer, two possibilities are allowed:
|
|
(+) No new DMA request is issued to the DMA controller (feature DISABLED)
|
|
(+) Requests can continue to be generated (feature ENABLED).
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Enables or disables the specified ADC DMA request.
|
|
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
|
|
* @param NewState: new state of the selected ADC DMA transfer.
|
|
* This parameter can be: ENABLE or DISABLE.
|
|
* @retval None
|
|
*/
|
|
void ADC_DMACmd(ADC_TypeDef* ADCx, FunctionalState NewState)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_ADC_ALL_PERIPH(ADCx));
|
|
assert_param(IS_FUNCTIONAL_STATE(NewState));
|
|
if (NewState != DISABLE)
|
|
{
|
|
/* Enable the selected ADC DMA request */
|
|
ADCx->CR2 |= (uint32_t)ADC_CR2_DMA;
|
|
}
|
|
else
|
|
{
|
|
/* Disable the selected ADC DMA request */
|
|
ADCx->CR2 &= (uint32_t)(~ADC_CR2_DMA);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Enables or disables the ADC DMA request after last transfer (Single-ADC mode)
|
|
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
|
|
* @param NewState: new state of the selected ADC DMA request after last transfer.
|
|
* This parameter can be: ENABLE or DISABLE.
|
|
* @retval None
|
|
*/
|
|
void ADC_DMARequestAfterLastTransferCmd(ADC_TypeDef* ADCx, FunctionalState NewState)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_ADC_ALL_PERIPH(ADCx));
|
|
assert_param(IS_FUNCTIONAL_STATE(NewState));
|
|
if (NewState != DISABLE)
|
|
{
|
|
/* Enable the selected ADC DMA request after last transfer */
|
|
ADCx->CR2 |= (uint32_t)ADC_CR2_DDS;
|
|
}
|
|
else
|
|
{
|
|
/* Disable the selected ADC DMA request after last transfer */
|
|
ADCx->CR2 &= (uint32_t)(~ADC_CR2_DDS);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Enables or disables the ADC DMA request after last transfer in multi ADC mode
|
|
* @param NewState: new state of the selected ADC DMA request after last transfer.
|
|
* This parameter can be: ENABLE or DISABLE.
|
|
* @note if Enabled, DMA requests are issued as long as data are converted and
|
|
* DMA mode for multi ADC mode (selected using ADC_CommonInit() function
|
|
* by ADC_CommonInitStruct.ADC_DMAAccessMode structure member) is
|
|
* ADC_DMAAccessMode_1, ADC_DMAAccessMode_2 or ADC_DMAAccessMode_3.
|
|
* @retval None
|
|
*/
|
|
void ADC_MultiModeDMARequestAfterLastTransferCmd(FunctionalState NewState)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_FUNCTIONAL_STATE(NewState));
|
|
if (NewState != DISABLE)
|
|
{
|
|
/* Enable the selected ADC DMA request after last transfer */
|
|
ADC->CCR |= (uint32_t)ADC_CCR_DDS;
|
|
}
|
|
else
|
|
{
|
|
/* Disable the selected ADC DMA request after last transfer */
|
|
ADC->CCR &= (uint32_t)(~ADC_CCR_DDS);
|
|
}
|
|
}
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup ADC_Group6 Injected channels Configuration functions
|
|
* @brief Injected channels Configuration functions
|
|
*
|
|
@verbatim
|
|
===============================================================================
|
|
##### Injected channels Configuration functions #####
|
|
===============================================================================
|
|
|
|
[..] This section provide functions allowing to configure the ADC Injected channels,
|
|
it is composed of 2 sub sections :
|
|
|
|
(#) Configuration functions for Injected channels: This subsection provides
|
|
functions allowing to configure the ADC injected channels :
|
|
(++) Configure the rank in the injected group sequencer for each channel
|
|
(++) Configure the sampling time for each channel
|
|
(++) Activate the Auto injected Mode
|
|
(++) Activate the Discontinuous Mode
|
|
(++) scan mode activation
|
|
(++) External/software trigger source
|
|
(++) External trigger edge
|
|
(++) injected channels sequencer.
|
|
|
|
(#) Get the Specified Injected channel conversion data: This subsection
|
|
provides an important function in the ADC peripheral since it returns the
|
|
converted data of the specific injected channel.
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
/**
|
|
* @brief Configures for the selected ADC injected channel its corresponding
|
|
* rank in the sequencer and its sample time.
|
|
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
|
|
* @param ADC_Channel: the ADC channel to configure.
|
|
* This parameter can be one of the following values:
|
|
* @arg ADC_Channel_0: ADC Channel0 selected
|
|
* @arg ADC_Channel_1: ADC Channel1 selected
|
|
* @arg ADC_Channel_2: ADC Channel2 selected
|
|
* @arg ADC_Channel_3: ADC Channel3 selected
|
|
* @arg ADC_Channel_4: ADC Channel4 selected
|
|
* @arg ADC_Channel_5: ADC Channel5 selected
|
|
* @arg ADC_Channel_6: ADC Channel6 selected
|
|
* @arg ADC_Channel_7: ADC Channel7 selected
|
|
* @arg ADC_Channel_8: ADC Channel8 selected
|
|
* @arg ADC_Channel_9: ADC Channel9 selected
|
|
* @arg ADC_Channel_10: ADC Channel10 selected
|
|
* @arg ADC_Channel_11: ADC Channel11 selected
|
|
* @arg ADC_Channel_12: ADC Channel12 selected
|
|
* @arg ADC_Channel_13: ADC Channel13 selected
|
|
* @arg ADC_Channel_14: ADC Channel14 selected
|
|
* @arg ADC_Channel_15: ADC Channel15 selected
|
|
* @arg ADC_Channel_16: ADC Channel16 selected
|
|
* @arg ADC_Channel_17: ADC Channel17 selected
|
|
* @arg ADC_Channel_18: ADC Channel18 selected
|
|
* @param Rank: The rank in the injected group sequencer.
|
|
* This parameter must be between 1 to 4.
|
|
* @param ADC_SampleTime: The sample time value to be set for the selected channel.
|
|
* This parameter can be one of the following values:
|
|
* @arg ADC_SampleTime_3Cycles: Sample time equal to 3 cycles
|
|
* @arg ADC_SampleTime_15Cycles: Sample time equal to 15 cycles
|
|
* @arg ADC_SampleTime_28Cycles: Sample time equal to 28 cycles
|
|
* @arg ADC_SampleTime_56Cycles: Sample time equal to 56 cycles
|
|
* @arg ADC_SampleTime_84Cycles: Sample time equal to 84 cycles
|
|
* @arg ADC_SampleTime_112Cycles: Sample time equal to 112 cycles
|
|
* @arg ADC_SampleTime_144Cycles: Sample time equal to 144 cycles
|
|
* @arg ADC_SampleTime_480Cycles: Sample time equal to 480 cycles
|
|
* @retval None
|
|
*/
|
|
void ADC_InjectedChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime)
|
|
{
|
|
uint32_t tmpreg1 = 0, tmpreg2 = 0, tmpreg3 = 0;
|
|
/* Check the parameters */
|
|
assert_param(IS_ADC_ALL_PERIPH(ADCx));
|
|
assert_param(IS_ADC_CHANNEL(ADC_Channel));
|
|
assert_param(IS_ADC_INJECTED_RANK(Rank));
|
|
assert_param(IS_ADC_SAMPLE_TIME(ADC_SampleTime));
|
|
/* if ADC_Channel_10 ... ADC_Channel_18 is selected */
|
|
if (ADC_Channel > ADC_Channel_9)
|
|
{
|
|
/* Get the old register value */
|
|
tmpreg1 = ADCx->SMPR1;
|
|
/* Calculate the mask to clear */
|
|
tmpreg2 = SMPR1_SMP_SET << (3*(ADC_Channel - 10));
|
|
/* Clear the old sample time */
|
|
tmpreg1 &= ~tmpreg2;
|
|
/* Calculate the mask to set */
|
|
tmpreg2 = (uint32_t)ADC_SampleTime << (3*(ADC_Channel - 10));
|
|
/* Set the new sample time */
|
|
tmpreg1 |= tmpreg2;
|
|
/* Store the new register value */
|
|
ADCx->SMPR1 = tmpreg1;
|
|
}
|
|
else /* ADC_Channel include in ADC_Channel_[0..9] */
|
|
{
|
|
/* Get the old register value */
|
|
tmpreg1 = ADCx->SMPR2;
|
|
/* Calculate the mask to clear */
|
|
tmpreg2 = SMPR2_SMP_SET << (3 * ADC_Channel);
|
|
/* Clear the old sample time */
|
|
tmpreg1 &= ~tmpreg2;
|
|
/* Calculate the mask to set */
|
|
tmpreg2 = (uint32_t)ADC_SampleTime << (3 * ADC_Channel);
|
|
/* Set the new sample time */
|
|
tmpreg1 |= tmpreg2;
|
|
/* Store the new register value */
|
|
ADCx->SMPR2 = tmpreg1;
|
|
}
|
|
/* Rank configuration */
|
|
/* Get the old register value */
|
|
tmpreg1 = ADCx->JSQR;
|
|
/* Get JL value: Number = JL+1 */
|
|
tmpreg3 = (tmpreg1 & JSQR_JL_SET)>> 20;
|
|
/* Calculate the mask to clear: ((Rank-1)+(4-JL-1)) */
|
|
tmpreg2 = JSQR_JSQ_SET << (5 * (uint8_t)((Rank + 3) - (tmpreg3 + 1)));
|
|
/* Clear the old JSQx bits for the selected rank */
|
|
tmpreg1 &= ~tmpreg2;
|
|
/* Calculate the mask to set: ((Rank-1)+(4-JL-1)) */
|
|
tmpreg2 = (uint32_t)ADC_Channel << (5 * (uint8_t)((Rank + 3) - (tmpreg3 + 1)));
|
|
/* Set the JSQx bits for the selected rank */
|
|
tmpreg1 |= tmpreg2;
|
|
/* Store the new register value */
|
|
ADCx->JSQR = tmpreg1;
|
|
}
|
|
|
|
/**
|
|
* @brief Configures the sequencer length for injected channels
|
|
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
|
|
* @param Length: The sequencer length.
|
|
* This parameter must be a number between 1 to 4.
|
|
* @retval None
|
|
*/
|
|
void ADC_InjectedSequencerLengthConfig(ADC_TypeDef* ADCx, uint8_t Length)
|
|
{
|
|
uint32_t tmpreg1 = 0;
|
|
uint32_t tmpreg2 = 0;
|
|
/* Check the parameters */
|
|
assert_param(IS_ADC_ALL_PERIPH(ADCx));
|
|
assert_param(IS_ADC_INJECTED_LENGTH(Length));
|
|
|
|
/* Get the old register value */
|
|
tmpreg1 = ADCx->JSQR;
|
|
|
|
/* Clear the old injected sequence length JL bits */
|
|
tmpreg1 &= JSQR_JL_RESET;
|
|
|
|
/* Set the injected sequence length JL bits */
|
|
tmpreg2 = Length - 1;
|
|
tmpreg1 |= tmpreg2 << 20;
|
|
|
|
/* Store the new register value */
|
|
ADCx->JSQR = tmpreg1;
|
|
}
|
|
|
|
/**
|
|
* @brief Set the injected channels conversion value offset
|
|
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
|
|
* @param ADC_InjectedChannel: the ADC injected channel to set its offset.
|
|
* This parameter can be one of the following values:
|
|
* @arg ADC_InjectedChannel_1: Injected Channel1 selected
|
|
* @arg ADC_InjectedChannel_2: Injected Channel2 selected
|
|
* @arg ADC_InjectedChannel_3: Injected Channel3 selected
|
|
* @arg ADC_InjectedChannel_4: Injected Channel4 selected
|
|
* @param Offset: the offset value for the selected ADC injected channel
|
|
* This parameter must be a 12bit value.
|
|
* @retval None
|
|
*/
|
|
void ADC_SetInjectedOffset(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel, uint16_t Offset)
|
|
{
|
|
__IO uint32_t tmp = 0;
|
|
/* Check the parameters */
|
|
assert_param(IS_ADC_ALL_PERIPH(ADCx));
|
|
assert_param(IS_ADC_INJECTED_CHANNEL(ADC_InjectedChannel));
|
|
assert_param(IS_ADC_OFFSET(Offset));
|
|
|
|
tmp = (uint32_t)ADCx;
|
|
tmp += ADC_InjectedChannel;
|
|
|
|
/* Set the selected injected channel data offset */
|
|
*(__IO uint32_t *) tmp = (uint32_t)Offset;
|
|
}
|
|
|
|
/**
|
|
* @brief Configures the ADCx external trigger for injected channels conversion.
|
|
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
|
|
* @param ADC_ExternalTrigInjecConv: specifies the ADC trigger to start injected conversion.
|
|
* This parameter can be one of the following values:
|
|
* @arg ADC_ExternalTrigInjecConv_T1_CC4: Timer1 capture compare4 selected
|
|
* @arg ADC_ExternalTrigInjecConv_T1_TRGO: Timer1 TRGO event selected
|
|
* @arg ADC_ExternalTrigInjecConv_T2_CC1: Timer2 capture compare1 selected
|
|
* @arg ADC_ExternalTrigInjecConv_T2_TRGO: Timer2 TRGO event selected
|
|
* @arg ADC_ExternalTrigInjecConv_T3_CC2: Timer3 capture compare2 selected
|
|
* @arg ADC_ExternalTrigInjecConv_T3_CC4: Timer3 capture compare4 selected
|
|
* @arg ADC_ExternalTrigInjecConv_T4_CC1: Timer4 capture compare1 selected
|
|
* @arg ADC_ExternalTrigInjecConv_T4_CC2: Timer4 capture compare2 selected
|
|
* @arg ADC_ExternalTrigInjecConv_T4_CC3: Timer4 capture compare3 selected
|
|
* @arg ADC_ExternalTrigInjecConv_T4_TRGO: Timer4 TRGO event selected
|
|
* @arg ADC_ExternalTrigInjecConv_T5_CC4: Timer5 capture compare4 selected
|
|
* @arg ADC_ExternalTrigInjecConv_T5_TRGO: Timer5 TRGO event selected
|
|
* @arg ADC_ExternalTrigInjecConv_T8_CC2: Timer8 capture compare2 selected
|
|
* @arg ADC_ExternalTrigInjecConv_T8_CC3: Timer8 capture compare3 selected
|
|
* @arg ADC_ExternalTrigInjecConv_T8_CC4: Timer8 capture compare4 selected
|
|
* @arg ADC_ExternalTrigInjecConv_Ext_IT15: External interrupt line 15 event selected
|
|
* @retval None
|
|
*/
|
|
void ADC_ExternalTrigInjectedConvConfig(ADC_TypeDef* ADCx, uint32_t ADC_ExternalTrigInjecConv)
|
|
{
|
|
uint32_t tmpreg = 0;
|
|
/* Check the parameters */
|
|
assert_param(IS_ADC_ALL_PERIPH(ADCx));
|
|
assert_param(IS_ADC_EXT_INJEC_TRIG(ADC_ExternalTrigInjecConv));
|
|
|
|
/* Get the old register value */
|
|
tmpreg = ADCx->CR2;
|
|
|
|
/* Clear the old external event selection for injected group */
|
|
tmpreg &= CR2_JEXTSEL_RESET;
|
|
|
|
/* Set the external event selection for injected group */
|
|
tmpreg |= ADC_ExternalTrigInjecConv;
|
|
|
|
/* Store the new register value */
|
|
ADCx->CR2 = tmpreg;
|
|
}
|
|
|
|
/**
|
|
* @brief Configures the ADCx external trigger edge for injected channels conversion.
|
|
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
|
|
* @param ADC_ExternalTrigInjecConvEdge: specifies the ADC external trigger edge
|
|
* to start injected conversion.
|
|
* This parameter can be one of the following values:
|
|
* @arg ADC_ExternalTrigInjecConvEdge_None: external trigger disabled for
|
|
* injected conversion
|
|
* @arg ADC_ExternalTrigInjecConvEdge_Rising: detection on rising edge
|
|
* @arg ADC_ExternalTrigInjecConvEdge_Falling: detection on falling edge
|
|
* @arg ADC_ExternalTrigInjecConvEdge_RisingFalling: detection on both rising
|
|
* and falling edge
|
|
* @retval None
|
|
*/
|
|
void ADC_ExternalTrigInjectedConvEdgeConfig(ADC_TypeDef* ADCx, uint32_t ADC_ExternalTrigInjecConvEdge)
|
|
{
|
|
uint32_t tmpreg = 0;
|
|
/* Check the parameters */
|
|
assert_param(IS_ADC_ALL_PERIPH(ADCx));
|
|
assert_param(IS_ADC_EXT_INJEC_TRIG_EDGE(ADC_ExternalTrigInjecConvEdge));
|
|
/* Get the old register value */
|
|
tmpreg = ADCx->CR2;
|
|
/* Clear the old external trigger edge for injected group */
|
|
tmpreg &= CR2_JEXTEN_RESET;
|
|
/* Set the new external trigger edge for injected group */
|
|
tmpreg |= ADC_ExternalTrigInjecConvEdge;
|
|
/* Store the new register value */
|
|
ADCx->CR2 = tmpreg;
|
|
}
|
|
|
|
/**
|
|
* @brief Enables the selected ADC software start conversion of the injected channels.
|
|
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
|
|
* @retval None
|
|
*/
|
|
void ADC_SoftwareStartInjectedConv(ADC_TypeDef* ADCx)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_ADC_ALL_PERIPH(ADCx));
|
|
/* Enable the selected ADC conversion for injected group */
|
|
ADCx->CR2 |= (uint32_t)ADC_CR2_JSWSTART;
|
|
}
|
|
|
|
/**
|
|
* @brief Gets the selected ADC Software start injected conversion Status.
|
|
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
|
|
* @retval The new state of ADC software start injected conversion (SET or RESET).
|
|
*/
|
|
FlagStatus ADC_GetSoftwareStartInjectedConvCmdStatus(ADC_TypeDef* ADCx)
|
|
{
|
|
FlagStatus bitstatus = RESET;
|
|
/* Check the parameters */
|
|
assert_param(IS_ADC_ALL_PERIPH(ADCx));
|
|
|
|
/* Check the status of JSWSTART bit */
|
|
if ((ADCx->CR2 & ADC_CR2_JSWSTART) != (uint32_t)RESET)
|
|
{
|
|
/* JSWSTART bit is set */
|
|
bitstatus = SET;
|
|
}
|
|
else
|
|
{
|
|
/* JSWSTART bit is reset */
|
|
bitstatus = RESET;
|
|
}
|
|
/* Return the JSWSTART bit status */
|
|
return bitstatus;
|
|
}
|
|
|
|
/**
|
|
* @brief Enables or disables the selected ADC automatic injected group
|
|
* conversion after regular one.
|
|
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
|
|
* @param NewState: new state of the selected ADC auto injected conversion
|
|
* This parameter can be: ENABLE or DISABLE.
|
|
* @retval None
|
|
*/
|
|
void ADC_AutoInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_ADC_ALL_PERIPH(ADCx));
|
|
assert_param(IS_FUNCTIONAL_STATE(NewState));
|
|
if (NewState != DISABLE)
|
|
{
|
|
/* Enable the selected ADC automatic injected group conversion */
|
|
ADCx->CR1 |= (uint32_t)ADC_CR1_JAUTO;
|
|
}
|
|
else
|
|
{
|
|
/* Disable the selected ADC automatic injected group conversion */
|
|
ADCx->CR1 &= (uint32_t)(~ADC_CR1_JAUTO);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Enables or disables the discontinuous mode for injected group
|
|
* channel for the specified ADC
|
|
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
|
|
* @param NewState: new state of the selected ADC discontinuous mode on injected
|
|
* group channel.
|
|
* This parameter can be: ENABLE or DISABLE.
|
|
* @retval None
|
|
*/
|
|
void ADC_InjectedDiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_ADC_ALL_PERIPH(ADCx));
|
|
assert_param(IS_FUNCTIONAL_STATE(NewState));
|
|
if (NewState != DISABLE)
|
|
{
|
|
/* Enable the selected ADC injected discontinuous mode */
|
|
ADCx->CR1 |= (uint32_t)ADC_CR1_JDISCEN;
|
|
}
|
|
else
|
|
{
|
|
/* Disable the selected ADC injected discontinuous mode */
|
|
ADCx->CR1 &= (uint32_t)(~ADC_CR1_JDISCEN);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Returns the ADC injected channel conversion result
|
|
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
|
|
* @param ADC_InjectedChannel: the converted ADC injected channel.
|
|
* This parameter can be one of the following values:
|
|
* @arg ADC_InjectedChannel_1: Injected Channel1 selected
|
|
* @arg ADC_InjectedChannel_2: Injected Channel2 selected
|
|
* @arg ADC_InjectedChannel_3: Injected Channel3 selected
|
|
* @arg ADC_InjectedChannel_4: Injected Channel4 selected
|
|
* @retval The Data conversion value.
|
|
*/
|
|
uint16_t ADC_GetInjectedConversionValue(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel)
|
|
{
|
|
__IO uint32_t tmp = 0;
|
|
|
|
/* Check the parameters */
|
|
assert_param(IS_ADC_ALL_PERIPH(ADCx));
|
|
assert_param(IS_ADC_INJECTED_CHANNEL(ADC_InjectedChannel));
|
|
|
|
tmp = (uint32_t)ADCx;
|
|
tmp += ADC_InjectedChannel + JDR_OFFSET;
|
|
|
|
/* Returns the selected injected channel conversion data value */
|
|
return (uint16_t) (*(__IO uint32_t*) tmp);
|
|
}
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup ADC_Group7 Interrupts and flags management functions
|
|
* @brief Interrupts and flags management functions
|
|
*
|
|
@verbatim
|
|
===============================================================================
|
|
##### Interrupts and flags management functions #####
|
|
===============================================================================
|
|
|
|
[..] This section provides functions allowing to configure the ADC Interrupts
|
|
and to get the status and clear flags and Interrupts pending bits.
|
|
|
|
[..] Each ADC provides 4 Interrupts sources and 6 Flags which can be divided
|
|
into 3 groups:
|
|
|
|
*** Flags and Interrupts for ADC regular channels ***
|
|
=====================================================
|
|
[..]
|
|
(+) Flags :
|
|
(##) ADC_FLAG_OVR : Overrun detection when regular converted data are lost
|
|
|
|
(##) ADC_FLAG_EOC : Regular channel end of conversion ==> to indicate
|
|
(depending on EOCS bit, managed by ADC_EOCOnEachRegularChannelCmd() )
|
|
the end of:
|
|
(+++) a regular CHANNEL conversion
|
|
(+++) sequence of regular GROUP conversions .
|
|
|
|
(##) ADC_FLAG_STRT: Regular channel start ==> to indicate when regular
|
|
CHANNEL conversion starts.
|
|
[..]
|
|
(+) Interrupts :
|
|
(##) ADC_IT_OVR : specifies the interrupt source for Overrun detection
|
|
event.
|
|
(##) ADC_IT_EOC : specifies the interrupt source for Regular channel end
|
|
of conversion event.
|
|
|
|
|
|
*** Flags and Interrupts for ADC Injected channels ***
|
|
======================================================
|
|
[..]
|
|
(+) Flags :
|
|
(##) ADC_FLAG_JEOC : Injected channel end of conversion ==> to indicate
|
|
at the end of injected GROUP conversion
|
|
|
|
(##) ADC_FLAG_JSTRT: Injected channel start ==> to indicate hardware when
|
|
injected GROUP conversion starts.
|
|
[..]
|
|
(+) Interrupts :
|
|
(##) ADC_IT_JEOC : specifies the interrupt source for Injected channel
|
|
end of conversion event.
|
|
|
|
*** General Flags and Interrupts for the ADC ***
|
|
================================================
|
|
[..]
|
|
(+)Flags :
|
|
(##) ADC_FLAG_AWD: Analog watchdog ==> to indicate if the converted voltage
|
|
crosses the programmed thresholds values.
|
|
[..]
|
|
(+) Interrupts :
|
|
(##) ADC_IT_AWD : specifies the interrupt source for Analog watchdog event.
|
|
|
|
|
|
[..] The user should identify which mode will be used in his application to
|
|
manage the ADC controller events: Polling mode or Interrupt mode.
|
|
|
|
[..] In the Polling Mode it is advised to use the following functions:
|
|
(+) ADC_GetFlagStatus() : to check if flags events occur.
|
|
(+) ADC_ClearFlag() : to clear the flags events.
|
|
|
|
[..] In the Interrupt Mode it is advised to use the following functions:
|
|
(+) ADC_ITConfig() : to enable or disable the interrupt source.
|
|
(+) ADC_GetITStatus() : to check if Interrupt occurs.
|
|
(+) ADC_ClearITPendingBit() : to clear the Interrupt pending Bit
|
|
(corresponding Flag).
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
/**
|
|
* @brief Enables or disables the specified ADC interrupts.
|
|
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
|
|
* @param ADC_IT: specifies the ADC interrupt sources to be enabled or disabled.
|
|
* This parameter can be one of the following values:
|
|
* @arg ADC_IT_EOC: End of conversion interrupt mask
|
|
* @arg ADC_IT_AWD: Analog watchdog interrupt mask
|
|
* @arg ADC_IT_JEOC: End of injected conversion interrupt mask
|
|
* @arg ADC_IT_OVR: Overrun interrupt enable
|
|
* @param NewState: new state of the specified ADC interrupts.
|
|
* This parameter can be: ENABLE or DISABLE.
|
|
* @retval None
|
|
*/
|
|
void ADC_ITConfig(ADC_TypeDef* ADCx, uint16_t ADC_IT, FunctionalState NewState)
|
|
{
|
|
uint32_t itmask = 0;
|
|
/* Check the parameters */
|
|
assert_param(IS_ADC_ALL_PERIPH(ADCx));
|
|
assert_param(IS_FUNCTIONAL_STATE(NewState));
|
|
assert_param(IS_ADC_IT(ADC_IT));
|
|
|
|
/* Get the ADC IT index */
|
|
itmask = (uint8_t)ADC_IT;
|
|
itmask = (uint32_t)0x01 << itmask;
|
|
|
|
if (NewState != DISABLE)
|
|
{
|
|
/* Enable the selected ADC interrupts */
|
|
ADCx->CR1 |= itmask;
|
|
}
|
|
else
|
|
{
|
|
/* Disable the selected ADC interrupts */
|
|
ADCx->CR1 &= (~(uint32_t)itmask);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Checks whether the specified ADC flag is set or not.
|
|
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
|
|
* @param ADC_FLAG: specifies the flag to check.
|
|
* This parameter can be one of the following values:
|
|
* @arg ADC_FLAG_AWD: Analog watchdog flag
|
|
* @arg ADC_FLAG_EOC: End of conversion flag
|
|
* @arg ADC_FLAG_JEOC: End of injected group conversion flag
|
|
* @arg ADC_FLAG_JSTRT: Start of injected group conversion flag
|
|
* @arg ADC_FLAG_STRT: Start of regular group conversion flag
|
|
* @arg ADC_FLAG_OVR: Overrun flag
|
|
* @retval The new state of ADC_FLAG (SET or RESET).
|
|
*/
|
|
FlagStatus ADC_GetFlagStatus(ADC_TypeDef* ADCx, uint8_t ADC_FLAG)
|
|
{
|
|
FlagStatus bitstatus = RESET;
|
|
/* Check the parameters */
|
|
assert_param(IS_ADC_ALL_PERIPH(ADCx));
|
|
assert_param(IS_ADC_GET_FLAG(ADC_FLAG));
|
|
|
|
/* Check the status of the specified ADC flag */
|
|
if ((ADCx->SR & ADC_FLAG) != (uint8_t)RESET)
|
|
{
|
|
/* ADC_FLAG is set */
|
|
bitstatus = SET;
|
|
}
|
|
else
|
|
{
|
|
/* ADC_FLAG is reset */
|
|
bitstatus = RESET;
|
|
}
|
|
/* Return the ADC_FLAG status */
|
|
return bitstatus;
|
|
}
|
|
|
|
/**
|
|
* @brief Clears the ADCx's pending flags.
|
|
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
|
|
* @param ADC_FLAG: specifies the flag to clear.
|
|
* This parameter can be any combination of the following values:
|
|
* @arg ADC_FLAG_AWD: Analog watchdog flag
|
|
* @arg ADC_FLAG_EOC: End of conversion flag
|
|
* @arg ADC_FLAG_JEOC: End of injected group conversion flag
|
|
* @arg ADC_FLAG_JSTRT: Start of injected group conversion flag
|
|
* @arg ADC_FLAG_STRT: Start of regular group conversion flag
|
|
* @arg ADC_FLAG_OVR: Overrun flag
|
|
* @retval None
|
|
*/
|
|
void ADC_ClearFlag(ADC_TypeDef* ADCx, uint8_t ADC_FLAG)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_ADC_ALL_PERIPH(ADCx));
|
|
assert_param(IS_ADC_CLEAR_FLAG(ADC_FLAG));
|
|
|
|
/* Clear the selected ADC flags */
|
|
ADCx->SR = ~(uint32_t)ADC_FLAG;
|
|
}
|
|
|
|
/**
|
|
* @brief Checks whether the specified ADC interrupt has occurred or not.
|
|
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
|
|
* @param ADC_IT: specifies the ADC interrupt source to check.
|
|
* This parameter can be one of the following values:
|
|
* @arg ADC_IT_EOC: End of conversion interrupt mask
|
|
* @arg ADC_IT_AWD: Analog watchdog interrupt mask
|
|
* @arg ADC_IT_JEOC: End of injected conversion interrupt mask
|
|
* @arg ADC_IT_OVR: Overrun interrupt mask
|
|
* @retval The new state of ADC_IT (SET or RESET).
|
|
*/
|
|
ITStatus ADC_GetITStatus(ADC_TypeDef* ADCx, uint16_t ADC_IT)
|
|
{
|
|
ITStatus bitstatus = RESET;
|
|
uint32_t itmask = 0, enablestatus = 0;
|
|
|
|
/* Check the parameters */
|
|
assert_param(IS_ADC_ALL_PERIPH(ADCx));
|
|
assert_param(IS_ADC_IT(ADC_IT));
|
|
|
|
/* Get the ADC IT index */
|
|
itmask = ADC_IT >> 8;
|
|
|
|
/* Get the ADC_IT enable bit status */
|
|
enablestatus = (ADCx->CR1 & ((uint32_t)0x01 << (uint8_t)ADC_IT)) ;
|
|
|
|
/* Check the status of the specified ADC interrupt */
|
|
if (((ADCx->SR & itmask) != (uint32_t)RESET) && enablestatus)
|
|
{
|
|
/* ADC_IT is set */
|
|
bitstatus = SET;
|
|
}
|
|
else
|
|
{
|
|
/* ADC_IT is reset */
|
|
bitstatus = RESET;
|
|
}
|
|
/* Return the ADC_IT status */
|
|
return bitstatus;
|
|
}
|
|
|
|
/**
|
|
* @brief Clears the ADCx's interrupt pending bits.
|
|
* @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
|
|
* @param ADC_IT: specifies the ADC interrupt pending bit to clear.
|
|
* This parameter can be one of the following values:
|
|
* @arg ADC_IT_EOC: End of conversion interrupt mask
|
|
* @arg ADC_IT_AWD: Analog watchdog interrupt mask
|
|
* @arg ADC_IT_JEOC: End of injected conversion interrupt mask
|
|
* @arg ADC_IT_OVR: Overrun interrupt mask
|
|
* @retval None
|
|
*/
|
|
void ADC_ClearITPendingBit(ADC_TypeDef* ADCx, uint16_t ADC_IT)
|
|
{
|
|
uint8_t itmask = 0;
|
|
/* Check the parameters */
|
|
assert_param(IS_ADC_ALL_PERIPH(ADCx));
|
|
assert_param(IS_ADC_IT(ADC_IT));
|
|
/* Get the ADC IT index */
|
|
itmask = (uint8_t)(ADC_IT >> 8);
|
|
/* Clear the selected ADC interrupt pending bits */
|
|
ADCx->SR = ~(uint32_t)itmask;
|
|
}
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|