mirror
/
micropython
kopia lustrzana https://github.com/micropython/micropython
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
micropython/stm/stmusbh/usbh_core.c

858 wiersze
23 KiB
C
Czysty Wina Historia

/**
******************************************************************************
* @file usbh_core.c
* @author MCD Application Team
* @version V2.1.0
* @date 19-March-2012
* @brief This file implements the functions for the core state machine process
* the enumeration and the control transfer process
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "usbh_ioreq.h"
#include "usb_bsp.h"
#include "usbh_hcs.h"
#include "usbh_stdreq.h"
#include "usbh_core.h"
#include "usb_hcd_int.h"
/** @addtogroup USBH_LIB
* @{
*/
/** @addtogroup USBH_LIB_CORE
* @{
*/
/** @defgroup USBH_CORE
* @brief TThis file handles the basic enumaration when a device is connected
* to the host.
* @{
*/
/** @defgroup USBH_CORE_Private_TypesDefinitions
* @{
*/
uint8_t USBH_Disconnected (USB_OTG_CORE_HANDLE *pdev);
uint8_t USBH_Connected (USB_OTG_CORE_HANDLE *pdev);
uint8_t USBH_SOF (USB_OTG_CORE_HANDLE *pdev);
USBH_HCD_INT_cb_TypeDef USBH_HCD_INT_cb =
{
USBH_SOF,
USBH_Connected,
USBH_Disconnected,
};
USBH_HCD_INT_cb_TypeDef *USBH_HCD_INT_fops = &USBH_HCD_INT_cb;
/**
* @}
*/
/** @defgroup USBH_CORE_Private_Defines
* @{
*/
/**
* @}
*/
/** @defgroup USBH_CORE_Private_Macros
* @{
*/
/**
* @}
*/
/** @defgroup USBH_CORE_Private_Variables
* @{
*/
/**
* @}
*/
/** @defgroup USBH_CORE_Private_FunctionPrototypes
* @{
*/
static USBH_Status USBH_HandleEnum(USB_OTG_CORE_HANDLE *pdev, USBH_HOST *phost);
USBH_Status USBH_HandleControl (USB_OTG_CORE_HANDLE *pdev, USBH_HOST *phost);
/**
* @}
*/
/** @defgroup USBH_CORE_Private_Functions
* @{
*/
/**
* @brief USBH_Connected
* USB Connect callback function from the Interrupt.
* @param selected device
* @retval Status
*/
uint8_t USBH_Connected (USB_OTG_CORE_HANDLE *pdev)
{
pdev->host.ConnSts = 1;
return 0;
}
/**
* @brief USBH_Disconnected
* USB Disconnect callback function from the Interrupt.
* @param selected device
* @retval Status
*/
uint8_t USBH_Disconnected (USB_OTG_CORE_HANDLE *pdev)
{
pdev->host.ConnSts = 0;
return 0;
}
/**
* @brief USBH_SOF
* USB SOF callback function from the Interrupt.
* @param selected device
* @retval Status
*/
uint8_t USBH_SOF (USB_OTG_CORE_HANDLE *pdev)
{
/* This callback could be used to implement a scheduler process */
return 0;
}
/**
* @brief USBH_Init
* Host hardware and stack initializations
* @param class_cb: Class callback structure address
* @param usr_cb: User callback structure address
* @retval None
*/
void USBH_Init(USB_OTG_CORE_HANDLE *pdev,
USB_OTG_CORE_ID_TypeDef coreID,
USBH_HOST *phost,
USBH_Class_cb_TypeDef *class_cb,
USBH_Usr_cb_TypeDef *usr_cb)
{
/* Hardware Init */
USB_OTG_BSP_Init(pdev);
/* configure GPIO pin used for switching VBUS power */
USB_OTG_BSP_ConfigVBUS(0);
/* Host de-initializations */
USBH_DeInit(pdev, phost);
/*Register class and user callbacks */
phost->class_cb = class_cb;
phost->usr_cb = usr_cb;
/* Start the USB OTG core */
HCD_Init(pdev , coreID);
/* Upon Init call usr call back */
phost->usr_cb->Init();
/* Enable Interrupts */
USB_OTG_BSP_EnableInterrupt(pdev);
}
/**
* @brief USBH_DeInit
* Re-Initialize Host
* @param None
* @retval status: USBH_Status
*/
USBH_Status USBH_DeInit(USB_OTG_CORE_HANDLE *pdev, USBH_HOST *phost)
{
/* Software Init */
phost->gState = HOST_IDLE;
phost->gStateBkp = HOST_IDLE;
phost->EnumState = ENUM_IDLE;
phost->RequestState = CMD_SEND;
phost->Control.state = CTRL_SETUP;
phost->Control.ep0size = USB_OTG_MAX_EP0_SIZE;
phost->device_prop.address = USBH_DEVICE_ADDRESS_DEFAULT;
phost->device_prop.speed = HPRT0_PRTSPD_FULL_SPEED;
USBH_Free_Channel (pdev, phost->Control.hc_num_in);
USBH_Free_Channel (pdev, phost->Control.hc_num_out);
return USBH_OK;
}
/**
* @brief USBH_Process
* USB Host core main state machine process
* @param None
* @retval None
*/
void USBH_Process(USB_OTG_CORE_HANDLE *pdev , USBH_HOST *phost)
{
volatile USBH_Status status = USBH_FAIL;
/* check for Host port events */
if ((HCD_IsDeviceConnected(pdev) == 0)&& (phost->gState != HOST_IDLE))
{
if(phost->gState != HOST_DEV_DISCONNECTED)
{
phost->gState = HOST_DEV_DISCONNECTED;
}
}
switch (phost->gState)
{
case HOST_IDLE :
if (HCD_IsDeviceConnected(pdev))
{
phost->gState = HOST_DEV_ATTACHED;
USB_OTG_BSP_mDelay(100);
}
break;
case HOST_DEV_ATTACHED :
phost->usr_cb->DeviceAttached();
phost->Control.hc_num_out = USBH_Alloc_Channel(pdev, 0x00);
phost->Control.hc_num_in = USBH_Alloc_Channel(pdev, 0x80);
/* Reset USB Device */
if ( HCD_ResetPort(pdev) == 0)
{
phost->usr_cb->ResetDevice();
/* Wait for USB USBH_ISR_PrtEnDisableChange()
Host is Now ready to start the Enumeration
*/
phost->device_prop.speed = HCD_GetCurrentSpeed(pdev);
phost->gState = HOST_ENUMERATION;
phost->usr_cb->DeviceSpeedDetected(phost->device_prop.speed);
/* Open Control pipes */
USBH_Open_Channel (pdev,
phost->Control.hc_num_in,
phost->device_prop.address,
phost->device_prop.speed,
EP_TYPE_CTRL,
phost->Control.ep0size);
/* Open Control pipes */
USBH_Open_Channel (pdev,
phost->Control.hc_num_out,
phost->device_prop.address,
phost->device_prop.speed,
EP_TYPE_CTRL,
phost->Control.ep0size);
}
break;
case HOST_ENUMERATION:
/* Check for enumeration status */
if ( USBH_HandleEnum(pdev , phost) == USBH_OK)
{
/* The function shall return USBH_OK when full enumeration is complete */
/* user callback for end of device basic enumeration */
phost->usr_cb->EnumerationDone();
phost->gState = HOST_USR_INPUT;
}
break;
case HOST_USR_INPUT:
/*The function should return user response true to move to class state */
if ( phost->usr_cb->UserInput() == USBH_USR_RESP_OK)
{
if((phost->class_cb->Init(pdev, phost))\
== USBH_OK)
{
phost->gState = HOST_CLASS_REQUEST;
}
}
break;
case HOST_CLASS_REQUEST:
/* process class standard contol requests state machine */
status = phost->class_cb->Requests(pdev, phost);
if(status == USBH_OK)
{
phost->gState = HOST_CLASS;
}
else
{
USBH_ErrorHandle(phost, status);
}
break;
case HOST_CLASS:
/* process class state machine */
status = phost->class_cb->Machine(pdev, phost);
USBH_ErrorHandle(phost, status);
break;
case HOST_CTRL_XFER:
/* process control transfer state machine */
USBH_HandleControl(pdev, phost);
break;
case HOST_SUSPENDED:
break;
case HOST_ERROR_STATE:
/* Re-Initilaize Host for new Enumeration */
USBH_DeInit(pdev, phost);
phost->usr_cb->DeInit();
phost->class_cb->DeInit(pdev, &phost->device_prop);
break;
case HOST_DEV_DISCONNECTED :
/* Manage User disconnect operations*/
phost->usr_cb->DeviceDisconnected();
/* Re-Initilaize Host for new Enumeration */
USBH_DeInit(pdev, phost);
phost->usr_cb->DeInit();
phost->class_cb->DeInit(pdev, &phost->device_prop);
USBH_DeAllocate_AllChannel(pdev);
phost->gState = HOST_IDLE;
break;
default :
break;
}
}
/**
* @brief USBH_ErrorHandle
* This function handles the Error on Host side.
* @param errType : Type of Error or Busy/OK state
* @retval None
*/
void USBH_ErrorHandle(USBH_HOST *phost, USBH_Status errType)
{
/* Error unrecovered or not supported device speed */
if ( (errType == USBH_ERROR_SPEED_UNKNOWN) ||
(errType == USBH_UNRECOVERED_ERROR) )
{
phost->usr_cb->UnrecoveredError();
phost->gState = HOST_ERROR_STATE;
}
/* USB host restart requested from application layer */
else if(errType == USBH_APPLY_DEINIT)
{
phost->gState = HOST_ERROR_STATE;
/* user callback for initalization */
phost->usr_cb->Init();
}
}
/**
* @brief USBH_HandleEnum
* This function includes the complete enumeration process
* @param pdev: Selected device
* @retval USBH_Status
*/
static USBH_Status USBH_HandleEnum(USB_OTG_CORE_HANDLE *pdev, USBH_HOST *phost)
{
USBH_Status Status = USBH_BUSY;
uint8_t Local_Buffer[64];
switch (phost->EnumState)
{
case ENUM_IDLE:
/* Get Device Desc for only 1st 8 bytes : To get EP0 MaxPacketSize */
if ( USBH_Get_DevDesc(pdev , phost, 8) == USBH_OK)
{
phost->Control.ep0size = phost->device_prop.Dev_Desc.bMaxPacketSize;
/* Issue Reset */
HCD_ResetPort(pdev);
phost->EnumState = ENUM_GET_FULL_DEV_DESC;
/* modify control channels configuration for MaxPacket size */
USBH_Modify_Channel (pdev,
phost->Control.hc_num_out,
0,
0,
0,
phost->Control.ep0size);
USBH_Modify_Channel (pdev,
phost->Control.hc_num_in,
0,
0,
0,
phost->Control.ep0size);
}
break;
case ENUM_GET_FULL_DEV_DESC:
/* Get FULL Device Desc */
if ( USBH_Get_DevDesc(pdev, phost, USB_DEVICE_DESC_SIZE)\
== USBH_OK)
{
/* user callback for device descriptor available */
phost->usr_cb->DeviceDescAvailable(&phost->device_prop.Dev_Desc);
phost->EnumState = ENUM_SET_ADDR;
}
break;
case ENUM_SET_ADDR:
/* set address */
if ( USBH_SetAddress(pdev, phost, USBH_DEVICE_ADDRESS) == USBH_OK)
{
USB_OTG_BSP_mDelay(2);
phost->device_prop.address = USBH_DEVICE_ADDRESS;
/* user callback for device address assigned */
phost->usr_cb->DeviceAddressAssigned();
phost->EnumState = ENUM_GET_CFG_DESC;
/* modify control channels to update device address */
USBH_Modify_Channel (pdev,
phost->Control.hc_num_in,
phost->device_prop.address,
0,
0,
0);
USBH_Modify_Channel (pdev,
phost->Control.hc_num_out,
phost->device_prop.address,
0,
0,
0);
}
break;
case ENUM_GET_CFG_DESC:
/* get standard configuration descriptor */
if ( USBH_Get_CfgDesc(pdev,
phost,
USB_CONFIGURATION_DESC_SIZE) == USBH_OK)
{
phost->EnumState = ENUM_GET_FULL_CFG_DESC;
}
break;
case ENUM_GET_FULL_CFG_DESC:
/* get FULL config descriptor (config, interface, endpoints) */
if (USBH_Get_CfgDesc(pdev,
phost,
phost->device_prop.Cfg_Desc.wTotalLength) == USBH_OK)
{
/* User callback for configuration descriptors available */
phost->usr_cb->ConfigurationDescAvailable(&phost->device_prop.Cfg_Desc,
phost->device_prop.Itf_Desc,
phost->device_prop.Ep_Desc[0]);
phost->EnumState = ENUM_GET_MFC_STRING_DESC;
}
break;
case ENUM_GET_MFC_STRING_DESC:
if (phost->device_prop.Dev_Desc.iManufacturer != 0)
{ /* Check that Manufacturer String is available */
if ( USBH_Get_StringDesc(pdev,
phost,
phost->device_prop.Dev_Desc.iManufacturer,
Local_Buffer ,
0xff) == USBH_OK)
{
/* User callback for Manufacturing string */
phost->usr_cb->ManufacturerString(Local_Buffer);
phost->EnumState = ENUM_GET_PRODUCT_STRING_DESC;
}
}
else
{
phost->usr_cb->ManufacturerString("N/A");
phost->EnumState = ENUM_GET_PRODUCT_STRING_DESC;
}
break;
case ENUM_GET_PRODUCT_STRING_DESC:
if (phost->device_prop.Dev_Desc.iProduct != 0)
{ /* Check that Product string is available */
if ( USBH_Get_StringDesc(pdev,
phost,
phost->device_prop.Dev_Desc.iProduct,
Local_Buffer,
0xff) == USBH_OK)
{
/* User callback for Product string */
phost->usr_cb->ProductString(Local_Buffer);
phost->EnumState = ENUM_GET_SERIALNUM_STRING_DESC;
}
}
else
{
phost->usr_cb->ProductString("N/A");
phost->EnumState = ENUM_GET_SERIALNUM_STRING_DESC;
}
break;
case ENUM_GET_SERIALNUM_STRING_DESC:
if (phost->device_prop.Dev_Desc.iSerialNumber != 0)
{ /* Check that Serial number string is available */
if ( USBH_Get_StringDesc(pdev,
phost,
phost->device_prop.Dev_Desc.iSerialNumber,
Local_Buffer,
0xff) == USBH_OK)
{
/* User callback for Serial number string */
phost->usr_cb->SerialNumString(Local_Buffer);
phost->EnumState = ENUM_SET_CONFIGURATION;
}
}
else
{
phost->usr_cb->SerialNumString("N/A");
phost->EnumState = ENUM_SET_CONFIGURATION;
}
break;
case ENUM_SET_CONFIGURATION:
/* set configuration (default config) */
if (USBH_SetCfg(pdev,
phost,
phost->device_prop.Cfg_Desc.bConfigurationValue) == USBH_OK)
{
phost->EnumState = ENUM_DEV_CONFIGURED;
}
break;
case ENUM_DEV_CONFIGURED:
/* user callback for enumeration done */
Status = USBH_OK;
break;
default:
break;
}
return Status;
}
/**
* @brief USBH_HandleControl
* Handles the USB control transfer state machine
* @param pdev: Selected device
* @retval Status
*/
USBH_Status USBH_HandleControl (USB_OTG_CORE_HANDLE *pdev, USBH_HOST *phost)
{
uint8_t direction;
static uint16_t timeout = 0;
USBH_Status status = USBH_OK;
URB_STATE URB_Status = URB_IDLE;
phost->Control.status = CTRL_START;
switch (phost->Control.state)
{
case CTRL_SETUP:
/* send a SETUP packet */
USBH_CtlSendSetup (pdev,
phost->Control.setup.d8 ,
phost->Control.hc_num_out);
phost->Control.state = CTRL_SETUP_WAIT;
break;
case CTRL_SETUP_WAIT:
URB_Status = HCD_GetURB_State(pdev , phost->Control.hc_num_out);
/* case SETUP packet sent successfully */
if(URB_Status == URB_DONE)
{
direction = (phost->Control.setup.b.bmRequestType & USB_REQ_DIR_MASK);
/* check if there is a data stage */
if (phost->Control.setup.b.wLength.w != 0 )
{
timeout = DATA_STAGE_TIMEOUT;
if (direction == USB_D2H)
{
/* Data Direction is IN */
phost->Control.state = CTRL_DATA_IN;
}
else
{
/* Data Direction is OUT */
phost->Control.state = CTRL_DATA_OUT;
}
}
/* No DATA stage */
else
{
timeout = NODATA_STAGE_TIMEOUT;
/* If there is No Data Transfer Stage */
if (direction == USB_D2H)
{
/* Data Direction is IN */
phost->Control.state = CTRL_STATUS_OUT;
}
else
{
/* Data Direction is OUT */
phost->Control.state = CTRL_STATUS_IN;
}
}
/* Set the delay timer to enable timeout for data stage completion */
phost->Control.timer = HCD_GetCurrentFrame(pdev);
}
else if(URB_Status == URB_ERROR)
{
phost->Control.state = CTRL_ERROR;
phost->Control.status = CTRL_XACTERR;
}
break;
case CTRL_DATA_IN:
/* Issue an IN token */
USBH_CtlReceiveData(pdev,
phost->Control.buff,
phost->Control.length,
phost->Control.hc_num_in);
phost->Control.state = CTRL_DATA_IN_WAIT;
break;
case CTRL_DATA_IN_WAIT:
URB_Status = HCD_GetURB_State(pdev , phost->Control.hc_num_in);
/* check is DATA packet transfered successfully */
if (URB_Status == URB_DONE)
{
phost->Control.state = CTRL_STATUS_OUT;
}
/* manage error cases*/
if (URB_Status == URB_STALL)
{
/* In stall case, return to previous machine state*/
phost->gState = phost->gStateBkp;
}
else if (URB_Status == URB_ERROR)
{
/* Device error */
phost->Control.state = CTRL_ERROR;
}
else if ((HCD_GetCurrentFrame(pdev)- phost->Control.timer) > timeout)
{
/* timeout for IN transfer */
phost->Control.state = CTRL_ERROR;
}
break;
case CTRL_DATA_OUT:
/* Start DATA out transfer (only one DATA packet)*/
pdev->host.hc[phost->Control.hc_num_out].toggle_out = 1;
USBH_CtlSendData (pdev,
phost->Control.buff,
phost->Control.length ,
phost->Control.hc_num_out);
phost->Control.state = CTRL_DATA_OUT_WAIT;
break;
case CTRL_DATA_OUT_WAIT:
URB_Status = HCD_GetURB_State(pdev , phost->Control.hc_num_out);
if (URB_Status == URB_DONE)
{ /* If the Setup Pkt is sent successful, then change the state */
phost->Control.state = CTRL_STATUS_IN;
}
/* handle error cases */
else if (URB_Status == URB_STALL)
{
/* In stall case, return to previous machine state*/
phost->gState = phost->gStateBkp;
phost->Control.state = CTRL_STALLED;
}
else if (URB_Status == URB_NOTREADY)
{
/* Nack received from device */
phost->Control.state = CTRL_DATA_OUT;
}
else if (URB_Status == URB_ERROR)
{
/* device error */
phost->Control.state = CTRL_ERROR;
}
break;
case CTRL_STATUS_IN:
/* Send 0 bytes out packet */
USBH_CtlReceiveData (pdev,
0,
0,
phost->Control.hc_num_in);
phost->Control.state = CTRL_STATUS_IN_WAIT;
break;
case CTRL_STATUS_IN_WAIT:
URB_Status = HCD_GetURB_State(pdev , phost->Control.hc_num_in);
if ( URB_Status == URB_DONE)
{ /* Control transfers completed, Exit the State Machine */
phost->gState = phost->gStateBkp;
phost->Control.state = CTRL_COMPLETE;
}
else if (URB_Status == URB_ERROR)
{
phost->Control.state = CTRL_ERROR;
}
else if((HCD_GetCurrentFrame(pdev)\
- phost->Control.timer) > timeout)
{
phost->Control.state = CTRL_ERROR;
}
else if(URB_Status == URB_STALL)
{
/* Control transfers completed, Exit the State Machine */
phost->gState = phost->gStateBkp;
phost->Control.status = CTRL_STALL;
status = USBH_NOT_SUPPORTED;
}
break;
case CTRL_STATUS_OUT:
pdev->host.hc[phost->Control.hc_num_out].toggle_out ^= 1;
USBH_CtlSendData (pdev,
0,
0,
phost->Control.hc_num_out);
phost->Control.state = CTRL_STATUS_OUT_WAIT;
break;
case CTRL_STATUS_OUT_WAIT:
URB_Status = HCD_GetURB_State(pdev , phost->Control.hc_num_out);
if (URB_Status == URB_DONE)
{
phost->gState = phost->gStateBkp;
phost->Control.state = CTRL_COMPLETE;
}
else if (URB_Status == URB_NOTREADY)
{
phost->Control.state = CTRL_STATUS_OUT;
}
else if (URB_Status == URB_ERROR)
{
phost->Control.state = CTRL_ERROR;
}
break;
case CTRL_ERROR:
/*
After a halt condition is encountered or an error is detected by the
host, a control endpoint is allowed to recover by accepting the next Setup
PID; i.e., recovery actions via some other pipe are not required for control
endpoints. For the Default Control Pipe, a device reset will ultimately be
required to clear the halt or error condition if the next Setup PID is not
accepted.
*/
if (++ phost->Control.errorcount <= USBH_MAX_ERROR_COUNT)
{
/* Do the transmission again, starting from SETUP Packet */
phost->Control.state = CTRL_SETUP;
}
else
{
phost->Control.status = CTRL_FAIL;
phost->gState = phost->gStateBkp;
status = USBH_FAIL;
}
break;
default:
break;
}
return status;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
Reference in New Issue View Git Blame Kopiuj bezpośredni odnośnik