micropython/ports/stm32/usbd_msc_storage.c

307 wiersze
8.4 KiB
C

/*
* This file is part of the MicroPython project, http://micropython.org/
*/
/**
******************************************************************************
* @file usbd_storage_msd.c
* @author MCD application Team
* @version V1.1.0
* @date 19-March-2012
* @brief This file provides the disk operations functions.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* Heavily modified by dpgeorge for MicroPython.
*
******************************************************************************
*/
#include <stdint.h>
#include "usbd_cdc_msc_hid.h"
#include "usbd_msc_storage.h"
#include "py/mpstate.h"
#include "storage.h"
#include "sdcard.h"
// These are needed to support removal of the medium, so that the USB drive
// can be unmounted, and won't be remounted automatically.
static uint8_t flash_started = 0;
#if MICROPY_HW_HAS_SDCARD
static uint8_t sdcard_started = 0;
#endif
/******************************************************************************/
// Callback functions for when the internal flash is the mass storage device
static const int8_t FLASH_STORAGE_Inquirydata[] = { // 36 bytes
// LUN 0
0x00,
0x80, // 0x00 for a fixed drive, 0x80 for a removable drive
0x02,
0x02,
(STANDARD_INQUIRY_DATA_LEN - 5),
0x00,
0x00,
0x00,
'u', 'P', 'y', ' ', ' ', ' ', ' ', ' ', // Manufacturer : 8 bytes
'm', 'i', 'c', 'r', 'o', 'S', 'D', ' ', // Product : 16 Bytes
'F', 'l', 'a', 's', 'h', ' ', ' ', ' ',
'1', '.', '0' ,'0', // Version : 4 Bytes
};
/**
* @brief Initialize the storage medium
* @param lun : logical unit number
* @retval Status
*/
int8_t FLASH_STORAGE_Init(uint8_t lun) {
storage_init();
flash_started = 1;
return 0;
}
/**
* @brief return medium capacity and block size
* @param lun : logical unit number
* @param block_num : number of physical block
* @param block_size : size of a physical block
* @retval Status
*/
int8_t FLASH_STORAGE_GetCapacity(uint8_t lun, uint32_t *block_num, uint16_t *block_size) {
*block_size = storage_get_block_size();
*block_num = storage_get_block_count();
return 0;
}
/**
* @brief check whether the medium is ready
* @param lun : logical unit number
* @retval Status
*/
int8_t FLASH_STORAGE_IsReady(uint8_t lun) {
if (flash_started) {
return 0;
}
return -1;
}
/**
* @brief check whether the medium is write-protected
* @param lun : logical unit number
* @retval Status
*/
int8_t FLASH_STORAGE_IsWriteProtected(uint8_t lun) {
return 0;
}
// Remove the lun
int8_t FLASH_STORAGE_StartStopUnit(uint8_t lun, uint8_t started) {
flash_started = started;
return 0;
}
int8_t FLASH_STORAGE_PreventAllowMediumRemoval(uint8_t lun, uint8_t param) {
// sync the flash so that the cache is cleared and the device can be unplugged/turned off
storage_flush();
return 0;
}
/**
* @brief Read data from the medium
* @param lun : logical unit number
* @param buf : Pointer to the buffer to save data
* @param blk_addr : address of 1st block to be read
* @param blk_len : nmber of blocks to be read
* @retval Status
*/
int8_t FLASH_STORAGE_Read(uint8_t lun, uint8_t *buf, uint32_t blk_addr, uint16_t blk_len) {
storage_read_blocks(buf, blk_addr, blk_len);
return 0;
}
/**
* @brief Write data to the medium
* @param lun : logical unit number
* @param buf : Pointer to the buffer to write from
* @param blk_addr : address of 1st block to be written
* @param blk_len : nmber of blocks to be read
* @retval Status
*/
int8_t FLASH_STORAGE_Write (uint8_t lun, uint8_t *buf, uint32_t blk_addr, uint16_t blk_len) {
storage_write_blocks(buf, blk_addr, blk_len);
return 0;
}
/**
* @brief Return number of supported logical unit
* @param None
* @retval number of logical unit
*/
int8_t FLASH_STORAGE_GetMaxLun(void) {
return 0;
}
const USBD_StorageTypeDef USBD_FLASH_STORAGE_fops = {
FLASH_STORAGE_Init,
FLASH_STORAGE_GetCapacity,
FLASH_STORAGE_IsReady,
FLASH_STORAGE_IsWriteProtected,
FLASH_STORAGE_StartStopUnit,
FLASH_STORAGE_PreventAllowMediumRemoval,
FLASH_STORAGE_Read,
FLASH_STORAGE_Write,
FLASH_STORAGE_GetMaxLun,
(int8_t *)FLASH_STORAGE_Inquirydata,
};
/******************************************************************************/
// Callback functions for when the SD card is the mass storage device
#if MICROPY_HW_HAS_SDCARD
static const int8_t SDCARD_STORAGE_Inquirydata[] = { // 36 bytes
// LUN 0
0x00,
0x80, // 0x00 for a fixed drive, 0x80 for a removable drive
0x02,
0x02,
(STANDARD_INQUIRY_DATA_LEN - 5),
0x00,
0x00,
0x00,
'u', 'P', 'y', ' ', ' ', ' ', ' ', ' ', // Manufacturer : 8 bytes
'm', 'i', 'c', 'r', 'o', 'S', 'D', ' ', // Product : 16 Bytes
'S', 'D', ' ', 'c', 'a', 'r', 'd', ' ',
'1', '.', '0' ,'0', // Version : 4 Bytes
};
/**
* @brief Initialize the storage medium
* @param lun : logical unit number
* @retval Status
*/
int8_t SDCARD_STORAGE_Init(uint8_t lun) {
if (!sdcard_power_on()) {
return -1;
}
sdcard_started = 1;
return 0;
}
/**
* @brief return medium capacity and block size
* @param lun : logical unit number
* @param block_num : number of physical block
* @param block_size : size of a physical block
* @retval Status
*/
int8_t SDCARD_STORAGE_GetCapacity(uint8_t lun, uint32_t *block_num, uint16_t *block_size) {
*block_size = SDCARD_BLOCK_SIZE;
*block_num = sdcard_get_capacity_in_bytes() / SDCARD_BLOCK_SIZE;
return 0;
}
/**
* @brief check whether the medium is ready
* @param lun : logical unit number
* @retval Status
*/
int8_t SDCARD_STORAGE_IsReady(uint8_t lun) {
if (sdcard_started) {
return 0;
}
return -1;
}
/**
* @brief check whether the medium is write-protected
* @param lun : logical unit number
* @retval Status
*/
int8_t SDCARD_STORAGE_IsWriteProtected(uint8_t lun) {
return 0;
}
// Remove the lun
int8_t SDCARD_STORAGE_StartStopUnit(uint8_t lun, uint8_t started) {
sdcard_started = started;
return 0;
}
int8_t SDCARD_STORAGE_PreventAllowMediumRemoval(uint8_t lun, uint8_t param) {
return 0;
}
/**
* @brief Read data from the medium
* @param lun : logical unit number
* @param buf : Pointer to the buffer to save data
* @param blk_addr : address of 1st block to be read
* @param blk_len : nmber of blocks to be read
* @retval Status
*/
int8_t SDCARD_STORAGE_Read(uint8_t lun, uint8_t *buf, uint32_t blk_addr, uint16_t blk_len) {
if (sdcard_read_blocks(buf, blk_addr, blk_len) != 0) {
return -1;
}
return 0;
}
/**
* @brief Write data to the medium
* @param lun : logical unit number
* @param buf : Pointer to the buffer to write from
* @param blk_addr : address of 1st block to be written
* @param blk_len : nmber of blocks to be read
* @retval Status
*/
int8_t SDCARD_STORAGE_Write(uint8_t lun, uint8_t *buf, uint32_t blk_addr, uint16_t blk_len) {
if (sdcard_write_blocks(buf, blk_addr, blk_len) != 0) {
return -1;
}
return 0;
}
/**
* @brief Return number of supported logical unit
* @param None
* @retval number of logical unit
*/
int8_t SDCARD_STORAGE_GetMaxLun(void) {
return 0;
}
const USBD_StorageTypeDef USBD_SDCARD_STORAGE_fops = {
SDCARD_STORAGE_Init,
SDCARD_STORAGE_GetCapacity,
SDCARD_STORAGE_IsReady,
SDCARD_STORAGE_IsWriteProtected,
SDCARD_STORAGE_StartStopUnit,
SDCARD_STORAGE_PreventAllowMediumRemoval,
SDCARD_STORAGE_Read,
SDCARD_STORAGE_Write,
SDCARD_STORAGE_GetMaxLun,
(int8_t *)SDCARD_STORAGE_Inquirydata,
};
#endif // MICROPY_HW_HAS_SDCARD