kopia lustrzana https://github.com/micropython/micropython
105 wiersze
3.1 KiB
ReStructuredText
105 wiersze
3.1 KiB
ReStructuredText
.. _pyb.DAC:
|
|
|
|
class DAC -- digital to analog conversion
|
|
=========================================
|
|
|
|
The DAC is used to output analog values (a specific voltage) on pin X5 or pin X6.
|
|
The voltage will be between 0 and 3.3V.
|
|
|
|
*This module will undergo changes to the API.*
|
|
|
|
Example usage::
|
|
|
|
from pyb import DAC
|
|
|
|
dac = DAC(1) # create DAC 1 on pin X5
|
|
dac.write(128) # write a value to the DAC (makes X5 1.65V)
|
|
|
|
dac = DAC(1, bits=12) # use 12 bit resolution
|
|
dac.write(4095) # output maximum value, 3.3V
|
|
|
|
To output a continuous sine-wave::
|
|
|
|
import math
|
|
from pyb import DAC
|
|
|
|
# create a buffer containing a sine-wave
|
|
buf = bytearray(100)
|
|
for i in range(len(buf)):
|
|
buf[i] = 128 + int(127 * math.sin(2 * math.pi * i / len(buf)))
|
|
|
|
# output the sine-wave at 400Hz
|
|
dac = DAC(1)
|
|
dac.write_timed(buf, 400 * len(buf), mode=DAC.CIRCULAR)
|
|
|
|
To output a continuous sine-wave at 12-bit resolution::
|
|
|
|
import math
|
|
from array import array
|
|
from pyb import DAC
|
|
|
|
# create a buffer containing a sine-wave, using half-word samples
|
|
buf = array('H', 2048 + int(2047 * math.sin(2 * math.pi * i / 128)) for i in range(128))
|
|
|
|
# output the sine-wave at 400Hz
|
|
dac = DAC(1, bits=12)
|
|
dac.write_timed(buf, 400 * len(buf), mode=DAC.CIRCULAR)
|
|
|
|
Constructors
|
|
------------
|
|
|
|
.. class:: pyb.DAC(port, bits=8)
|
|
|
|
Construct a new DAC object.
|
|
|
|
``port`` can be a pin object, or an integer (1 or 2).
|
|
DAC(1) is on pin X5 and DAC(2) is on pin X6.
|
|
|
|
``bits`` is an integer specifying the resolution, and can be 8 or 12.
|
|
The maximum value for the write and write_timed methods will be
|
|
2\*\*``bits``-1.
|
|
|
|
Methods
|
|
-------
|
|
|
|
.. method:: dac.init(bits=8)
|
|
|
|
Reinitialise the DAC. ``bits`` can be 8 or 12.
|
|
|
|
.. method:: dac.noise(freq)
|
|
|
|
Generate a pseudo-random noise signal. A new random sample is written
|
|
to the DAC output at the given frequency.
|
|
|
|
.. method:: dac.triangle(freq)
|
|
|
|
Generate a triangle wave. The value on the DAC output changes at
|
|
the given frequency, and the frequence of the repeating triangle wave
|
|
itself is 2048 times smaller.
|
|
|
|
.. method:: dac.write(value)
|
|
|
|
Direct access to the DAC output. The minimum value is 0. The maximum
|
|
value is 2\*\*``bits``-1, where ``bits`` is set when creating the DAC
|
|
object or by using the ``init`` method.
|
|
|
|
.. method:: dac.write_timed(data, freq, \*, mode=DAC.NORMAL)
|
|
|
|
Initiates a burst of RAM to DAC using a DMA transfer.
|
|
The input data is treated as an array of bytes in 8-bit mode, and
|
|
an array of unsigned half-words (array typecode 'H') in 12-bit mode.
|
|
|
|
``freq`` can be an integer specifying the frequency to write the DAC
|
|
samples at, using Timer(6). Or it can be an already-initialised
|
|
Timer object which is used to trigger the DAC sample. Valid timers
|
|
are 2, 4, 5, 6, 7 and 8.
|
|
|
|
``mode`` can be ``DAC.NORMAL`` or ``DAC.CIRCULAR``.
|
|
|
|
Example using both DACs at the same time::
|
|
|
|
dac1 = DAC(1)
|
|
dac2 = DAC(2)
|
|
dac1.write_timed(buf1, pyb.Timer(6, freq=100), mode=DAC.CIRCULAR)
|
|
dac2.write_timed(buf2, pyb.Timer(7, freq=200), mode=DAC.CIRCULAR)
|