Damien George e43a74a4db drivers/memory/spiflash: Add MICROPY_HW_SPIFLASH_ENABLE_CACHE option. ... This only needs to be enabled if a board uses FAT FS on external SPI flash. When disabled (and using external SPI flash) 4k of RAM can be saved. Signed-off-by: Damien George <damien@micropython.org>		2020-12-18 13:39:32 +11:00
..
ADAFRUIT_F405_EXPRESS	…
B_L072Z_LRWAN1	stm32/boards: Disable pend_throw, uheapq, utimeq on small-flash boards.	2020-03-28 13:55:59 +11:00
B_L475E_IOT01A	…
CERB40	…
ESPRUINO_PICO	…
HYDRABUS	…
LIMIFROG	…
MIKROE_CLICKER2_STM32	stm32/mboot: Add support for littlefs.	2020-06-26 21:17:02 +10:00
NADHAT_PYBF405	…
NETDUINO_PLUS_2	…
NUCLEO_F091RC	…
NUCLEO_F401RE	…
NUCLEO_F411RE	…
NUCLEO_F412ZG	stm32/boards: Add board config for Nucleo-F412ZG development board.	2020-05-15 10:48:48 +10:00
NUCLEO_F413ZH	…
NUCLEO_F429ZI	…
NUCLEO_F446RE	…
NUCLEO_F722ZE	…
NUCLEO_F746ZG	…
NUCLEO_F767ZI	…
NUCLEO_H743ZI	stm32/boards/NUCLEO_H743ZI: Enable ethernet peripheral.	2020-12-08 15:27:51 +11:00
NUCLEO_L073RZ	stm32/boards: Disable pend_throw, uheapq, utimeq on small-flash boards.	2020-03-28 13:55:59 +11:00
NUCLEO_L432KC	stm32/boards: Disable pend_throw, uheapq, utimeq on small-flash boards.	2020-03-28 13:55:59 +11:00
NUCLEO_L452RE	…
NUCLEO_L476RG	…
NUCLEO_WB55	stm32/boards/NUCLEO_WB55/rfcore_firmware.py: Increase GET_STATE timeout.	2020-10-16 10:45:03 +11:00
OLIMEX_E407	…
PYBD_SF2	drivers/memory/spiflash: Add MICROPY_HW_SPIFLASH_ENABLE_CACHE option.	2020-12-18 13:39:32 +11:00
PYBD_SF3	stm32/boards: Enable LFS2 on PYBD_SF3 and PYBD_SF6.	2020-06-25 16:32:48 +10:00
PYBD_SF6	stm32/boards: Factor out common data/bss/heap/stack linker sections.	2020-10-29 23:31:59 +11:00
PYBLITEV10	…
PYBV3	…
PYBV4	…
PYBV10	…
PYBV11	…
STM32F4DISC	all: Reformat C and Python source code with tools/codeformat.py.	2020-02-28 10:33:03 +11:00
STM32F7DISC	…
STM32F411DISC	…
STM32F429DISC	…
STM32F439	…
STM32F769DISC	drivers/memory/spiflash: Add MICROPY_HW_SPIFLASH_ENABLE_CACHE option.	2020-12-18 13:39:32 +11:00
STM32L476DISC	drivers/memory/spiflash: Add MICROPY_HW_SPIFLASH_ENABLE_CACHE option.	2020-12-18 13:39:32 +11:00
STM32L496GDISC	…
USBDONGLE_WB55	stm32/boards/USBDONGLE_WB55: Add USE_MBOOT support.	2020-09-08 23:53:12 +10:00
common_basic.ld	stm32/boards: Factor out common data/bss/heap/stack linker sections.	2020-10-29 23:31:59 +11:00
common_bl.ld	stm32/boards: Factor out common data/bss/heap/stack linker sections.	2020-10-29 23:31:59 +11:00
common_blifs.ld	stm32/boards: Factor out common data/bss/heap/stack linker sections.	2020-10-29 23:31:59 +11:00
common_bss_heap_stack.ld	stm32/boards: Factor out common data/bss/heap/stack linker sections.	2020-10-29 23:31:59 +11:00
common_extratext_data_in_flash.ld	stm32: Support C++ code and user C modules written in C++.	2020-10-29 23:35:36 +11:00
common_extratext_data_in_flash_app.ld	stm32: Support C++ code and user C modules written in C++.	2020-10-29 23:35:36 +11:00
common_extratext_data_in_flash_text.ld	stm32: Support C++ code and user C modules written in C++.	2020-10-29 23:35:36 +11:00
common_ifs.ld	stm32/boards: Factor out common data/bss/heap/stack linker sections.	2020-10-29 23:31:59 +11:00
make-pins.py	all: Update Python code to conform to latest black formatting.	2020-08-29 15:18:01 +10:00
manifest.py	stm32: Enable and freeze uasyncio.	2020-03-26 01:25:45 +11:00
openocd_stm32f4.cfg	…
openocd_stm32f7.cfg	…
openocd_stm32l4.cfg	…
pllvalues.py	all: Reformat C and Python source code with tools/codeformat.py.	2020-02-28 10:33:03 +11:00
stm32f0xx_hal_conf_base.h	stm32/rtc: Validate the RTC prescaler on boot and change if incorrect.	2020-11-13 11:23:52 +11:00
stm32f4xx_hal_conf_base.h	stm32/adc: Deselect VBAT after reading to prevent battery drain.	2020-12-18 13:32:02 +11:00
stm32f4xx_prefix.c	…
stm32f7xx_hal_conf_base.h	stm32/adc: Deselect VBAT after reading to prevent battery drain.	2020-12-18 13:32:02 +11:00
stm32f091_af.csv	…
stm32f091xc.ld	…
stm32f401_af.csv	…
stm32f401xd.ld	…
stm32f401xe.ld	…
stm32f405.ld	…
stm32f405_af.csv	…
stm32f411.ld	…
stm32f411_af.csv	…
stm32f412_af.csv	stm32: Add support for F412 MCUs.	2020-05-15 10:08:30 +10:00
stm32f412zx.ld	stm32: Add support for F412 MCUs.	2020-05-15 10:08:30 +10:00
stm32f413_af.csv	…
stm32f413xg.ld	…
stm32f413xh.ld	…
stm32f429.ld	…
stm32f429_af.csv	…
stm32f439.ld	…
stm32f439_af.csv	…
stm32f722.ld	…
stm32f722_af.csv	…
stm32f746.ld	…
stm32f746_af.csv	…
stm32f767.ld	…
stm32f767_af.csv	…
stm32f769.ld	…
stm32h7xx_hal_conf_base.h	stm32/rtc: Validate the RTC prescaler on boot and change if incorrect.	2020-11-13 11:23:52 +11:00
stm32h743.ld	stm32/boards/stm32h743.ld: Enable D2 RAM and add eth-buffer section.	2020-12-08 15:27:27 +11:00
stm32h743_af.csv	…
stm32l0xx_hal_conf_base.h	stm32/rtc: Validate the RTC prescaler on boot and change if incorrect.	2020-11-13 11:23:52 +11:00
stm32l4xx_hal_conf_base.h	stm32/rtc: Validate the RTC prescaler on boot and change if incorrect.	2020-11-13 11:23:52 +11:00
stm32l072_af.csv	…
stm32l072xz.ld	…
stm32l432.ld	…
stm32l432_af.csv	…
stm32l452_af.csv	…
stm32l452xe.ld	…
stm32l476_af.csv	…
stm32l476xe.ld	…
stm32l476xg.ld	…
stm32l496_af.csv	…
stm32l496xg.ld	…
stm32wb55_af.csv	…
stm32wb55xg.ld	stm32/rfcore: Update rfcore.c to match how ST examples work.	2020-09-08 23:53:02 +10:00
stm32wbxx_hal_conf_base.h	stm32/rtc: Validate the RTC prescaler on boot and change if incorrect.	2020-11-13 11:23:52 +11:00