micropython/ports/stm32/boards/PYBD_SF2/board_init.c

90 wiersze
3.1 KiB
C

/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2018-2019 Damien P. George
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include <string.h>
#include "py/mphal.h"
#include "storage.h"
#if defined(STM32F722xx) || defined(STM32F723xx) || defined(STM32F732xx) || defined(STM32F733xx)
#define OTP_ADDR (0x1ff079e0)
#else
#define OTP_ADDR (0x1ff0f3c0)
#endif
#define OTP ((pyb_otp_t *)OTP_ADDR)
typedef struct _pyb_otp_t {
uint16_t series;
uint16_t rev;
uint8_t mac[6];
} pyb_otp_t;
void mboot_board_early_init(void) {
// Enable 500mA on WBUS-DIP28
mp_hal_pin_config(pyb_pin_W23, MP_HAL_PIN_MODE_INPUT, MP_HAL_PIN_PULL_UP, 0);
#if defined(MBOOT_SDCARD_ADDR)
// Configure EN_3V3 as an output pin so that SD card can be used
mp_hal_pin_config(pyb_pin_EN_3V3, MP_HAL_PIN_MODE_OUTPUT, MP_HAL_PIN_PULL_NONE, 0);
#endif
}
void board_early_init(void) {
// Configure EN_3V3 as an output pin, but keep it turned off
mp_hal_pin_config(pyb_pin_EN_3V3, MP_HAL_PIN_MODE_OUTPUT, MP_HAL_PIN_PULL_NONE, 0);
// Explicitly init SPI2 because it's not enabled as a block device
spi_bdev_ioctl(&spi_bdev2, BDEV_IOCTL_INIT, (uint32_t)&spiflash2_config);
}
#if !BUILDING_MBOOT
void board_sleep(int value) {
mp_spiflash_deepsleep(&spi_bdev.spiflash, value);
mp_spiflash_deepsleep(&spi_bdev2.spiflash, value);
}
void mp_hal_get_mac(int idx, uint8_t buf[6]) {
// Check if OTP region has a valid MAC address, and use it if it does
if (OTP->series == 0x00d1 && OTP->mac[0] == 'H' && OTP->mac[1] == 'J' && OTP->mac[2] == '0') {
#if __GNUC__ >= 11
#pragma GCC diagnostic push
#pragma GCC diagnostic ignored "-Warray-bounds"
#pragma GCC diagnostic ignored "-Wstringop-overread"
#endif
memcpy(buf, OTP->mac, 6);
#if __GNUC__ >= 11
#pragma GCC diagnostic pop
#endif
buf[5] += idx;
return;
}
// Generate a random locally administered MAC address (LAA)
mp_hal_generate_laa_mac(idx, buf);
}
#endif