micropython/stm/lib/usbd_msc_scsi.h

196 wiersze
6.2 KiB
C

/**
******************************************************************************
* @file usbd_msc_scsi.h
* @author MCD Application Team
* @version V1.1.0
* @date 19-March-2012
* @brief header for the usbd_msc_scsi.c file
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USBD_MSC_SCSI_H
#define __USBD_MSC_SCSI_H
/* Includes ------------------------------------------------------------------*/
#include "usbd_def.h"
/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
* @{
*/
/** @defgroup USBD_SCSI
* @brief header file for the storage disk file
* @{
*/
/** @defgroup USBD_SCSI_Exported_Defines
* @{
*/
#define SENSE_LIST_DEEPTH 4
/* SCSI Commands */
#define SCSI_FORMAT_UNIT 0x04
#define SCSI_INQUIRY 0x12
#define SCSI_MODE_SELECT6 0x15
#define SCSI_MODE_SELECT10 0x55
#define SCSI_MODE_SENSE6 0x1A
#define SCSI_MODE_SENSE10 0x5A
#define SCSI_ALLOW_MEDIUM_REMOVAL 0x1E
#define SCSI_READ6 0x08
#define SCSI_READ10 0x28
#define SCSI_READ12 0xA8
#define SCSI_READ16 0x88
#define SCSI_READ_CAPACITY10 0x25
#define SCSI_READ_CAPACITY16 0x9E
#define SCSI_REQUEST_SENSE 0x03
#define SCSI_START_STOP_UNIT 0x1B
#define SCSI_TEST_UNIT_READY 0x00
#define SCSI_WRITE6 0x0A
#define SCSI_WRITE10 0x2A
#define SCSI_WRITE12 0xAA
#define SCSI_WRITE16 0x8A
#define SCSI_VERIFY10 0x2F
#define SCSI_VERIFY12 0xAF
#define SCSI_VERIFY16 0x8F
#define SCSI_SEND_DIAGNOSTIC 0x1D
#define SCSI_READ_FORMAT_CAPACITIES 0x23
#define NO_SENSE 0
#define RECOVERED_ERROR 1
#define NOT_READY 2
#define MEDIUM_ERROR 3
#define HARDWARE_ERROR 4
#define ILLEGAL_REQUEST 5
#define UNIT_ATTENTION 6
#define DATA_PROTECT 7
#define BLANK_CHECK 8
#define VENDOR_SPECIFIC 9
#define COPY_ABORTED 10
#define ABORTED_COMMAND 11
#define VOLUME_OVERFLOW 13
#define MISCOMPARE 14
#define INVALID_CDB 0x20
#define INVALID_FIELED_IN_COMMAND 0x24
#define PARAMETER_LIST_LENGTH_ERROR 0x1A
#define INVALID_FIELD_IN_PARAMETER_LIST 0x26
#define ADDRESS_OUT_OF_RANGE 0x21
#define MEDIUM_NOT_PRESENT 0x3A
#define MEDIUM_HAVE_CHANGED 0x28
#define WRITE_PROTECTED 0x27
#define UNRECOVERED_READ_ERROR 0x11
#define WRITE_FAULT 0x03
#define READ_FORMAT_CAPACITY_DATA_LEN 0x0C
#define READ_CAPACITY10_DATA_LEN 0x08
#define MODE_SENSE10_DATA_LEN 0x08
#define MODE_SENSE6_DATA_LEN 0x04
#define REQUEST_SENSE_DATA_LEN 0x12
#define STANDARD_INQUIRY_DATA_LEN 0x24
#define BLKVFY 0x04
extern uint8_t Page00_Inquiry_Data[];
extern uint8_t Standard_Inquiry_Data[];
extern uint8_t Standard_Inquiry_Data2[];
extern uint8_t Mode_Sense6_data[];
extern uint8_t Mode_Sense10_data[];
extern uint8_t Scsi_Sense_Data[];
extern uint8_t ReadCapacity10_Data[];
extern uint8_t ReadFormatCapacity_Data [];
/**
* @}
*/
/** @defgroup USBD_SCSI_Exported_TypesDefinitions
* @{
*/
typedef struct _SENSE_ITEM {
char Skey;
union {
struct _ASCs {
char ASC;
char ASCQ;
}b;
unsigned int ASC;
char *pData;
} w;
} SCSI_Sense_TypeDef;
/**
* @}
*/
/** @defgroup USBD_SCSI_Exported_Macros
* @{
*/
/**
* @}
*/
/** @defgroup USBD_SCSI_Exported_Variables
* @{
*/
extern SCSI_Sense_TypeDef SCSI_Sense [SENSE_LIST_DEEPTH];
extern uint8_t SCSI_Sense_Head;
extern uint8_t SCSI_Sense_Tail;
/**
* @}
*/
/** @defgroup USBD_SCSI_Exported_FunctionsPrototype
* @{
*/
int8_t SCSI_ProcessCmd(USB_OTG_CORE_HANDLE *pdev,
uint8_t lun,
uint8_t *cmd);
void SCSI_SenseCode(uint8_t lun,
uint8_t sKey,
uint8_t ASC);
/**
* @}
*/
#endif /* __USBD_MSC_SCSI_H */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/