kopia lustrzana https://github.com/micropython/micropython
6e71cde6aa
For ports with MICROPY_VFS and MICROPY_PY_IO enabled their configuration can now be simplified to use the defaults for mp_import_stat and mp_builtin_open. This commit makes no functional change, except for the following minor points: - the built-in "open" is removed from the minimal port (it previously did nothing) - the duplicate built-in "input" is removed from the esp32 port - qemu-arm now delegates to VFS import/open Signed-off-by: Damien George <damien@micropython.org> |
||
|---|---|---|
| .. | ||
| test-frzmpy | ||
| Makefile | ||
| Makefile.test | ||
| README.md | ||
| imx6.ld | ||
| main.c | ||
| modmachine.c | ||
| mpconfigport.h | ||
| mphalport.h | ||
| mps2.ld | ||
| nrf51.ld | ||
| qstrdefsport.h | ||
| startup.c | ||
| stm32.ld | ||
| test_main.c | ||
| uart.c | ||
| uart.h | ||
README.md
This is experimental, community-supported port for Cortex-M emulation as provided by QEMU (http://qemu.org).
The purposes of this port are to enable:
- Continuous integration
- run tests against architecture-specific parts of code base
- Experimentation
- simulation & prototyping of anything that has architecture-specific code
- exploring instruction set in terms of optimising some part of MicroPython or a module
- Streamlined debugging
- no need for JTAG or even an MCU chip itself
- no need to use OpenOCD or anything else that might slow down the process in terms of plugging things together, pressing buttons, etc.
This port will only work with the GNU ARM Embedded Toolchain
and not with CodeSourcery toolchain. You will need to modify
LDFLAGS if you want to use CodeSourcery's version of arm-none-eabi.
The difference is that CodeSourcery needs -T generic-m-hosted.ld while
ARM's version requires --specs=nano.specs --specs=rdimon.specs to be
passed to the linker.
To build and run image with builtin testsuite:
make -f Makefile.test test