kopia lustrzana https://github.com/micropython/micropython
168 wiersze
7.9 KiB
ReStructuredText
168 wiersze
7.9 KiB
ReStructuredText
.. currentmodule:: pyb
|
|
.. _pyb.ADC:
|
|
|
|
class ADC -- analog to digital conversion
|
|
=========================================
|
|
|
|
Usage::
|
|
|
|
import pyb
|
|
|
|
adc = pyb.ADC(pin) # create an analog object from a pin
|
|
val = adc.read() # read an analog value
|
|
|
|
adc = pyb.ADCAll(resolution) # create an ADCAll object
|
|
adc = pyb.ADCAll(resolution, mask) # create an ADCAll object for selected analog channels
|
|
val = adc.read_channel(channel) # read the given channel
|
|
val = adc.read_core_temp() # read MCU temperature
|
|
val = adc.read_core_vbat() # read MCU VBAT
|
|
val = adc.read_core_vref() # read MCU VREF
|
|
val = adc.read_vref() # read MCU supply voltage
|
|
|
|
|
|
Constructors
|
|
------------
|
|
|
|
.. class:: pyb.ADC(pin)
|
|
|
|
Create an ADC object associated with the given pin.
|
|
This allows you to then read analog values on that pin.
|
|
|
|
Methods
|
|
-------
|
|
|
|
.. method:: ADC.read()
|
|
|
|
Read the value on the analog pin and return it. The returned value
|
|
will be between 0 and 4095.
|
|
|
|
.. method:: ADC.read_timed(buf, timer)
|
|
|
|
Read analog values into ``buf`` at a rate set by the ``timer`` object.
|
|
|
|
``buf`` can be bytearray or array.array for example. The ADC values have
|
|
12-bit resolution and are stored directly into ``buf`` if its element size is
|
|
16 bits or greater. If ``buf`` has only 8-bit elements (eg a bytearray) then
|
|
the sample resolution will be reduced to 8 bits.
|
|
|
|
``timer`` should be a Timer object, and a sample is read each time the timer
|
|
triggers. The timer must already be initialised and running at the desired
|
|
sampling frequency.
|
|
|
|
To support previous behaviour of this function, ``timer`` can also be an
|
|
integer which specifies the frequency (in Hz) to sample at. In this case
|
|
Timer(6) will be automatically configured to run at the given frequency.
|
|
|
|
Example using a Timer object (preferred way)::
|
|
|
|
adc = pyb.ADC(pyb.Pin.board.X19) # create an ADC on pin X19
|
|
tim = pyb.Timer(6, freq=10) # create a timer running at 10Hz
|
|
buf = bytearray(100) # creat a buffer to store the samples
|
|
adc.read_timed(buf, tim) # sample 100 values, taking 10s
|
|
|
|
Example using an integer for the frequency::
|
|
|
|
adc = pyb.ADC(pyb.Pin.board.X19) # create an ADC on pin X19
|
|
buf = bytearray(100) # create a buffer of 100 bytes
|
|
adc.read_timed(buf, 10) # read analog values into buf at 10Hz
|
|
# this will take 10 seconds to finish
|
|
for val in buf: # loop over all values
|
|
print(val) # print the value out
|
|
|
|
This function does not allocate any heap memory. It has blocking behaviour:
|
|
it does not return to the calling program until the buffer is full.
|
|
|
|
.. method:: ADC.read_timed_multi((adcx, adcy, ...), (bufx, bufy, ...), timer)
|
|
|
|
This is a static method. It can be used to extract relative timing or
|
|
phase data from multiple ADC's.
|
|
|
|
It reads analog values from multiple ADC's into buffers at a rate set by
|
|
the *timer* object. Each time the timer triggers a sample is rapidly
|
|
read from each ADC in turn.
|
|
|
|
ADC and buffer instances are passed in tuples with each ADC having an
|
|
associated buffer. All buffers must be of the same type and length and
|
|
the number of buffers must equal the number of ADC's.
|
|
|
|
Buffers can be ``bytearray`` or ``array.array`` for example. The ADC values
|
|
have 12-bit resolution and are stored directly into the buffer if its element
|
|
size is 16 bits or greater. If buffers have only 8-bit elements (eg a
|
|
``bytearray``) then the sample resolution will be reduced to 8 bits.
|
|
|
|
*timer* must be a Timer object. The timer must already be initialised
|
|
and running at the desired sampling frequency.
|
|
|
|
Example reading 3 ADC's::
|
|
|
|
adc0 = pyb.ADC(pyb.Pin.board.X1) # Create ADC's
|
|
adc1 = pyb.ADC(pyb.Pin.board.X2)
|
|
adc2 = pyb.ADC(pyb.Pin.board.X3)
|
|
tim = pyb.Timer(8, freq=100) # Create timer
|
|
rx0 = array.array('H', (0 for i in range(100))) # ADC buffers of
|
|
rx1 = array.array('H', (0 for i in range(100))) # 100 16-bit words
|
|
rx2 = array.array('H', (0 for i in range(100)))
|
|
# read analog values into buffers at 100Hz (takes one second)
|
|
pyb.ADC.read_timed_multi((adc0, adc1, adc2), (rx0, rx1, rx2), tim)
|
|
for n in range(len(rx0)):
|
|
print(rx0[n], rx1[n], rx2[n])
|
|
|
|
This function does not allocate any heap memory. It has blocking behaviour:
|
|
it does not return to the calling program until the buffers are full.
|
|
|
|
The function returns ``True`` if all samples were acquired with correct
|
|
timing. At high sample rates the time taken to acquire a set of samples
|
|
can exceed the timer period. In this case the function returns ``False``,
|
|
indicating a loss of precision in the sample interval. In extreme cases
|
|
samples may be missed.
|
|
|
|
The maximum rate depends on factors including the data width and the
|
|
number of ADC's being read. In testing two ADC's were sampled at a timer
|
|
rate of 210kHz without overrun. Samples were missed at 215kHz. For three
|
|
ADC's the limit is around 140kHz, and for four it is around 110kHz.
|
|
At high sample rates disabling interrupts for the duration can reduce the
|
|
risk of sporadic data loss.
|
|
|
|
The ADCAll Object
|
|
-----------------
|
|
|
|
Instantiating this changes all masked ADC pins to analog inputs. The preprocessed MCU temperature,
|
|
VREF and VBAT data can be accessed on ADC channels 16, 17 and 18 respectively.
|
|
Appropriate scaling is handled according to reference voltage used (usually 3.3V).
|
|
The temperature sensor on the chip is factory calibrated and allows to read the die temperature
|
|
to +/- 1 degree centigrade. Although this sounds pretty accurate, don't forget that the MCU's internal
|
|
temperature is measured. Depending on processing loads and I/O subsystems active the die temperature
|
|
may easily be tens of degrees above ambient temperature. On the other hand a pyboard woken up after a
|
|
long standby period will show correct ambient temperature within limits mentioned above.
|
|
|
|
The ``ADCAll`` ``read_core_vbat()``, ``read_vref()`` and ``read_core_vref()`` methods read
|
|
the backup battery voltage, reference voltage and the (1.21V nominal) reference voltage using the
|
|
actual supply as a reference. All results are floating point numbers giving direct voltage values.
|
|
|
|
``read_core_vbat()`` returns the voltage of the backup battery. This voltage is also adjusted according
|
|
to the actual supply voltage. To avoid analog input overload the battery voltage is measured
|
|
via a voltage divider and scaled according to the divider value. To prevent excessive loads
|
|
to the backup battery, the voltage divider is only active during ADC conversion.
|
|
|
|
``read_vref()`` is evaluated by measuring the internal voltage reference and backscale it using
|
|
factory calibration value of the internal voltage reference. In most cases the reading would be close
|
|
to 3.3V. If the pyboard is operated from a battery, the supply voltage may drop to values below 3.3V.
|
|
The pyboard will still operate fine as long as the operating conditions are met. With proper settings
|
|
of MCU clock, flash access speed and programming mode it is possible to run the pyboard down to
|
|
2 V and still get useful ADC conversion.
|
|
|
|
It is very important to make sure analog input voltages never exceed actual supply voltage.
|
|
|
|
Other analog input channels (0..15) will return unscaled integer values according to the selected
|
|
precision.
|
|
|
|
To avoid unwanted activation of analog inputs (channel 0..15) a second parameter can be specified.
|
|
This parameter is a binary pattern where each requested analog input has the corresponding bit set.
|
|
The default value is 0xffffffff which means all analog inputs are active. If just the internal
|
|
channels (16..18) are required, the mask value should be 0x70000.
|
|
|
|
Example::
|
|
|
|
adcall = pyb.ADCAll(12, 0x70000) # 12 bit resolution, internal channels
|
|
temp = adcall.read_core_temp()
|