micropython

Historia

Peter Hinch d2f22ea953 drivers/nrf24l01: Change pipe addrs in test to match Arduino addrs. These addresses were initially chosen to match the nRF24 Arduino library examples but they are byte-reversed. So change them to be on-air compatible with the Arduino library. Also, the data sheet for the nRF24 says that RX data pipes 1-5 must share the same top 32-bits, and must differ only in the LSbyte. The addresses used here (while correct because they are on TX pipe and RX pipe 0) are misleading in this sense, because it looks like they were chosen to share the top 32-bits per the datasheet.		2020-02-16 23:26:34 +11:00
..
bus	drivers, stm32: Support SPI/QSPI flash chips over 16MB.	2020-01-30 13:18:38 +11:00
cc3000	drivers/cc3000: Use cc3000_time_t instead of time_t for custom typedef.	2018-08-08 16:37:26 +10:00
cc3100	drivers: Update CC3100 driver library to SDK release version 1.1.0.	2015-03-16 00:42:08 +01:00
cyw43	drivers/cyw43: Return early from cyw43_wifi_set_up if wifi_on fails.	2020-01-31 20:46:35 +11:00
dht	drivers/dht: Allow open-drain-high call to be DHT specific if needed.	2019-01-22 00:23:05 +11:00
display	drivers/display/ssd1306.py: Change to use new i2c.writevto() method.	2019-05-20 15:06:39 +10:00
memory	drivers, stm32: Support SPI/QSPI flash chips over 16MB.	2020-01-30 13:18:38 +11:00
nrf24l01	drivers/nrf24l01: Change pipe addrs in test to match Arduino addrs.	2020-02-16 23:26:34 +11:00
onewire	drivers/onewire/ds18x20.py: Add support for DS1822 sensor.	2019-10-16 14:28:13 +11:00
sdcard	drivers/sdcard: Raise exception on timeout of readinto.	2019-11-06 11:34:02 +11:00
wiznet5k	drivers/wiznet5k: Allow selecting maximum fixed buffer size for MACRAW.	2019-12-13 12:34:42 +11:00
README.md	Added 'drivers' directory, intended to hold code for specific hardware.	2014-09-01 22:52:37 +01:00

README.md

This directory contains drivers for specific hardware. The drivers are intended to work across multiple ports.