kopia lustrzana https://github.com/micropython/micropython
241 wiersze
9.4 KiB
C
241 wiersze
9.4 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32f4xx_syscfg.c
|
|
* @author MCD Application Team
|
|
* @version V1.3.0
|
|
* @date 08-November-2013
|
|
* @brief This file provides firmware functions to manage the SYSCFG peripheral.
|
|
*
|
|
@verbatim
|
|
|
|
===============================================================================
|
|
##### How to use this driver #####
|
|
===============================================================================
|
|
[..] This driver provides functions for:
|
|
|
|
(#) Remapping the memory accessible in the code area using SYSCFG_MemoryRemapConfig()
|
|
|
|
(#) Swapping the internal flash Bank1 and Bank2 this features is only visible for
|
|
STM32F42xxx/43xxx devices Devices.
|
|
|
|
(#) Manage the EXTI lines connection to the GPIOs using SYSCFG_EXTILineConfig()
|
|
|
|
(#) Select the ETHERNET media interface (RMII/RII) using SYSCFG_ETH_MediaInterfaceConfig()
|
|
|
|
-@- SYSCFG APB clock must be enabled to get write access to SYSCFG registers,
|
|
using RCC_APB2PeriphClockCmd(RCC_APB2Periph_SYSCFG, ENABLE);
|
|
|
|
@endverbatim
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© COPYRIGHT 2013 STMicroelectronics</center></h2>
|
|
*
|
|
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
|
* You may not use this file except in compliance with the License.
|
|
* You may obtain a copy of the License at:
|
|
*
|
|
* http://www.st.com/software_license_agreement_liberty_v2
|
|
*
|
|
* Unless required by applicable law or agreed to in writing, software
|
|
* distributed under the License is distributed on an "AS IS" BASIS,
|
|
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
* See the License for the specific language governing permissions and
|
|
* limitations under the License.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32f4xx_syscfg.h"
|
|
#include "stm32f4xx_rcc.h"
|
|
|
|
/** @addtogroup STM32F4xx_StdPeriph_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup SYSCFG
|
|
* @brief SYSCFG driver modules
|
|
* @{
|
|
*/
|
|
|
|
/* Private typedef -----------------------------------------------------------*/
|
|
/* Private define ------------------------------------------------------------*/
|
|
/* ------------ RCC registers bit address in the alias region ----------- */
|
|
#define SYSCFG_OFFSET (SYSCFG_BASE - PERIPH_BASE)
|
|
/* --- MEMRMP Register ---*/
|
|
/* Alias word address of UFB_MODE bit */
|
|
#define MEMRMP_OFFSET SYSCFG_OFFSET
|
|
#define UFB_MODE_BitNumber ((uint8_t)0x8)
|
|
#define UFB_MODE_BB (PERIPH_BB_BASE + (MEMRMP_OFFSET * 32) + (UFB_MODE_BitNumber * 4))
|
|
|
|
|
|
/* --- PMC Register ---*/
|
|
/* Alias word address of MII_RMII_SEL bit */
|
|
#define PMC_OFFSET (SYSCFG_OFFSET + 0x04)
|
|
#define MII_RMII_SEL_BitNumber ((uint8_t)0x17)
|
|
#define PMC_MII_RMII_SEL_BB (PERIPH_BB_BASE + (PMC_OFFSET * 32) + (MII_RMII_SEL_BitNumber * 4))
|
|
|
|
/* --- CMPCR Register ---*/
|
|
/* Alias word address of CMP_PD bit */
|
|
#define CMPCR_OFFSET (SYSCFG_OFFSET + 0x20)
|
|
#define CMP_PD_BitNumber ((uint8_t)0x00)
|
|
#define CMPCR_CMP_PD_BB (PERIPH_BB_BASE + (CMPCR_OFFSET * 32) + (CMP_PD_BitNumber * 4))
|
|
|
|
/* Private macro -------------------------------------------------------------*/
|
|
/* Private variables ---------------------------------------------------------*/
|
|
/* Private function prototypes -----------------------------------------------*/
|
|
/* Private functions ---------------------------------------------------------*/
|
|
|
|
/** @defgroup SYSCFG_Private_Functions
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Deinitializes the Alternate Functions (remap and EXTI configuration)
|
|
* registers to their default reset values.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
void SYSCFG_DeInit(void)
|
|
{
|
|
RCC_APB2PeriphResetCmd(RCC_APB2Periph_SYSCFG, ENABLE);
|
|
RCC_APB2PeriphResetCmd(RCC_APB2Periph_SYSCFG, DISABLE);
|
|
}
|
|
|
|
/**
|
|
* @brief Changes the mapping of the specified pin.
|
|
* @param SYSCFG_Memory: selects the memory remapping.
|
|
* This parameter can be one of the following values:
|
|
* @arg SYSCFG_MemoryRemap_Flash: Main Flash memory mapped at 0x00000000
|
|
* @arg SYSCFG_MemoryRemap_SystemFlash: System Flash memory mapped at 0x00000000
|
|
* @arg SYSCFG_MemoryRemap_FSMC: FSMC (Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000 for STM32F405xx/407xx and STM32F415xx/417xx devices.
|
|
* @arg SYSCFG_MemoryRemap_FMC: FMC (Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000 for STM32F42xxx/43xxx devices.
|
|
* @arg SYSCFG_MemoryRemap_SRAM: Embedded SRAM (112kB) mapped at 0x00000000
|
|
* @arg SYSCFG_MemoryRemap_SDRAM: FMC (External SDRAM) mapped at 0x00000000 for STM32F42xxx/43xxx devices.
|
|
* @retval None
|
|
*/
|
|
void SYSCFG_MemoryRemapConfig(uint8_t SYSCFG_MemoryRemap)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_SYSCFG_MEMORY_REMAP_CONFING(SYSCFG_MemoryRemap));
|
|
|
|
SYSCFG->MEMRMP = SYSCFG_MemoryRemap;
|
|
}
|
|
|
|
/**
|
|
* @brief Enables or disables the Interal FLASH Bank Swapping.
|
|
*
|
|
* @note This function can be used only for STM32F42xxx/43xxx devices.
|
|
*
|
|
* @param NewState: new state of Interal FLASH Bank swapping.
|
|
* This parameter can be one of the following values:
|
|
* @arg ENABLE: Flash Bank2 mapped at 0x08000000 (and aliased @0x00000000)
|
|
* and Flash Bank1 mapped at 0x08100000 (and aliased at 0x00100000)
|
|
* @arg DISABLE:(the default state) Flash Bank1 mapped at 0x08000000 (and aliased @0x0000 0000)
|
|
and Flash Bank2 mapped at 0x08100000 (and aliased at 0x00100000)
|
|
* @retval None
|
|
*/
|
|
void SYSCFG_MemorySwappingBank(FunctionalState NewState)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_FUNCTIONAL_STATE(NewState));
|
|
|
|
*(__IO uint32_t *) UFB_MODE_BB = (uint32_t)NewState;
|
|
}
|
|
|
|
/**
|
|
* @brief Selects the GPIO pin used as EXTI Line.
|
|
* @param EXTI_PortSourceGPIOx : selects the GPIO port to be used as source for
|
|
* EXTI lines where x can be (A..K) for STM32F42xxx/43xxx devices, (A..I)
|
|
* for STM32F405xx/407xx and STM32F415xx/417xx devices or (A, B, C, D and H)
|
|
* for STM32401xx devices.
|
|
*
|
|
* @param EXTI_PinSourcex: specifies the EXTI line to be configured.
|
|
* This parameter can be EXTI_PinSourcex where x can be (0..15, except
|
|
* for EXTI_PortSourceGPIOI x can be (0..11) for STM32F405xx/407xx
|
|
* and STM32F405xx/407xx devices and for EXTI_PortSourceGPIOK x can
|
|
* be (0..7) for STM32F42xxx/43xxx devices.
|
|
*
|
|
* @retval None
|
|
*/
|
|
void SYSCFG_EXTILineConfig(uint8_t EXTI_PortSourceGPIOx, uint8_t EXTI_PinSourcex)
|
|
{
|
|
uint32_t tmp = 0x00;
|
|
|
|
/* Check the parameters */
|
|
assert_param(IS_EXTI_PORT_SOURCE(EXTI_PortSourceGPIOx));
|
|
assert_param(IS_EXTI_PIN_SOURCE(EXTI_PinSourcex));
|
|
|
|
tmp = ((uint32_t)0x0F) << (0x04 * (EXTI_PinSourcex & (uint8_t)0x03));
|
|
SYSCFG->EXTICR[EXTI_PinSourcex >> 0x02] &= ~tmp;
|
|
SYSCFG->EXTICR[EXTI_PinSourcex >> 0x02] |= (((uint32_t)EXTI_PortSourceGPIOx) << (0x04 * (EXTI_PinSourcex & (uint8_t)0x03)));
|
|
}
|
|
|
|
/**
|
|
* @brief Selects the ETHERNET media interface
|
|
* @param SYSCFG_ETH_MediaInterface: specifies the Media Interface mode.
|
|
* This parameter can be one of the following values:
|
|
* @arg SYSCFG_ETH_MediaInterface_MII: MII mode selected
|
|
* @arg SYSCFG_ETH_MediaInterface_RMII: RMII mode selected
|
|
* @retval None
|
|
*/
|
|
void SYSCFG_ETH_MediaInterfaceConfig(uint32_t SYSCFG_ETH_MediaInterface)
|
|
{
|
|
assert_param(IS_SYSCFG_ETH_MEDIA_INTERFACE(SYSCFG_ETH_MediaInterface));
|
|
/* Configure MII_RMII selection bit */
|
|
*(__IO uint32_t *) PMC_MII_RMII_SEL_BB = SYSCFG_ETH_MediaInterface;
|
|
}
|
|
|
|
/**
|
|
* @brief Enables or disables the I/O Compensation Cell.
|
|
* @note The I/O compensation cell can be used only when the device supply
|
|
* voltage ranges from 2.4 to 3.6 V.
|
|
* @param NewState: new state of the I/O Compensation Cell.
|
|
* This parameter can be one of the following values:
|
|
* @arg ENABLE: I/O compensation cell enabled
|
|
* @arg DISABLE: I/O compensation cell power-down mode
|
|
* @retval None
|
|
*/
|
|
void SYSCFG_CompensationCellCmd(FunctionalState NewState)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_FUNCTIONAL_STATE(NewState));
|
|
|
|
*(__IO uint32_t *) CMPCR_CMP_PD_BB = (uint32_t)NewState;
|
|
}
|
|
|
|
/**
|
|
* @brief Checks whether the I/O Compensation Cell ready flag is set or not.
|
|
* @param None
|
|
* @retval The new state of the I/O Compensation Cell ready flag (SET or RESET)
|
|
*/
|
|
FlagStatus SYSCFG_GetCompensationCellStatus(void)
|
|
{
|
|
FlagStatus bitstatus = RESET;
|
|
|
|
if ((SYSCFG->CMPCR & SYSCFG_CMPCR_READY ) != (uint32_t)RESET)
|
|
{
|
|
bitstatus = SET;
|
|
}
|
|
else
|
|
{
|
|
bitstatus = RESET;
|
|
}
|
|
return bitstatus;
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|