micropython/ports/stm32/i2cslave.h

81 wiersze
3.1 KiB
C

/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2018 Damien P. George
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#ifndef MICROPY_INCLUDED_STM32_I2CSLAVE_H
#define MICROPY_INCLUDED_STM32_I2CSLAVE_H
#include STM32_HAL_H
#if !defined(I2C2_BASE)
// This MCU doesn't have I2C2_BASE, define it so that the i2c_idx calculation works.
#define I2C2_BASE (I2C1_BASE + ((I2C3_BASE - I2C1_BASE) / 2))
#endif
typedef I2C_TypeDef i2c_slave_t;
void i2c_slave_init_helper(i2c_slave_t *i2c, int addr);
static inline void i2c_slave_init(i2c_slave_t *i2c, int irqn, int irq_pri, int addr) {
int i2c_idx = ((uintptr_t)i2c - I2C1_BASE) / (I2C2_BASE - I2C1_BASE);
#if defined(STM32F4) || defined(STM32F7)
RCC->APB1ENR |= 1 << (RCC_APB1ENR_I2C1EN_Pos + i2c_idx);
volatile uint32_t tmp = RCC->APB1ENR; // Delay after enabling clock
(void)tmp;
#elif defined(STM32G0)
RCC->APBENR1 |= 1 << (RCC_APBENR1_I2C1EN_Pos + i2c_idx);
volatile uint32_t tmp = RCC->APBENR1; // Delay after enabling clock
(void)tmp;
#elif defined(STM32H5) || defined(STM32H7)
RCC->APB1LENR |= 1 << (RCC_APB1LENR_I2C1EN_Pos + i2c_idx);
volatile uint32_t tmp = RCC->APB1LENR; // Delay after enabling clock
(void)tmp;
#elif defined(STM32WB)
RCC->APB1ENR1 |= 1 << (RCC_APB1ENR1_I2C1EN_Pos + i2c_idx);
volatile uint32_t tmp = RCC->APB1ENR1; // Delay after enabling clock
(void)tmp;
#endif
i2c_slave_init_helper(i2c, addr);
NVIC_SetPriority(irqn, irq_pri);
NVIC_EnableIRQ(irqn);
}
static inline void i2c_slave_shutdown(i2c_slave_t *i2c, int irqn) {
i2c->CR1 = 0;
NVIC_DisableIRQ(irqn);
}
void i2c_slave_ev_irq_handler(i2c_slave_t *i2c);
// These should be provided externally
int i2c_slave_process_addr_match(i2c_slave_t *i2c, int rw);
int i2c_slave_process_rx_byte(i2c_slave_t *i2c, uint8_t val);
void i2c_slave_process_rx_end(i2c_slave_t *i2c);
uint8_t i2c_slave_process_tx_byte(i2c_slave_t *i2c);
void i2c_slave_process_tx_end(i2c_slave_t *i2c);
#endif // MICROPY_INCLUDED_STM32_I2CSLAVE_H