kopia lustrzana https://github.com/micropython/micropython
306 wiersze
9.2 KiB
ReStructuredText
306 wiersze
9.2 KiB
ReStructuredText
.. _porting_to_a_board:
|
|
|
|
Porting MicroPython
|
|
===================
|
|
|
|
The MicroPython project contains several ports to different microcontroller families and
|
|
architectures. The project repository has a `ports <https://github.com/micropython/micropython/tree/master/ports>`_
|
|
directory containing a subdirectory for each supported port.
|
|
|
|
A port will typically contain definitions for multiple "boards", each of which is a specific piece of
|
|
hardware that that port can run on, e.g. a development kit or device.
|
|
|
|
The `minimal port <https://github.com/micropython/micropython/tree/master/ports/minimal>`_ is
|
|
available as a simplified reference implementation of a MicroPython port. It can run on both the
|
|
host system and an STM32F4xx MCU.
|
|
|
|
In general, starting a port requires:
|
|
|
|
- Setting up the toolchain (configuring Makefiles, etc).
|
|
- Implementing boot configuration and CPU initialization.
|
|
- Initialising basic drivers required for development and debugging (e.g. GPIO, UART).
|
|
- Performing the board-specific configurations.
|
|
- Implementing the port-specific modules.
|
|
|
|
Minimal MicroPython firmware
|
|
----------------------------
|
|
|
|
The best way to start porting MicroPython to a new board is by integrating a minimal
|
|
MicroPython interpreter. For this walkthrough, create a subdirectory for the new
|
|
port in the ``ports`` directory:
|
|
|
|
.. code-block:: bash
|
|
|
|
$ cd ports
|
|
$ mkdir example_port
|
|
|
|
The basic MicroPython firmware is implemented in the main port file, e.g ``main.c``:
|
|
|
|
.. code-block:: c
|
|
|
|
#include "py/builtin.h"
|
|
#include "py/compile.h"
|
|
#include "py/gc.h"
|
|
#include "py/mperrno.h"
|
|
#include "py/stackctrl.h"
|
|
#include "shared/runtime/gchelper.h"
|
|
#include "shared/runtime/pyexec.h"
|
|
|
|
// Allocate memory for the MicroPython GC heap.
|
|
static char heap[4096];
|
|
|
|
int main(int argc, char **argv) {
|
|
// Initialise the MicroPython runtime.
|
|
mp_stack_ctrl_init();
|
|
gc_init(heap, heap + sizeof(heap));
|
|
mp_init();
|
|
|
|
// Start a normal REPL; will exit when ctrl-D is entered on a blank line.
|
|
pyexec_friendly_repl();
|
|
|
|
// Deinitialise the runtime.
|
|
gc_sweep_all();
|
|
mp_deinit();
|
|
return 0;
|
|
}
|
|
|
|
// Handle uncaught exceptions (should never be reached in a correct C implementation).
|
|
void nlr_jump_fail(void *val) {
|
|
for (;;) {
|
|
}
|
|
}
|
|
|
|
// Do a garbage collection cycle.
|
|
void gc_collect(void) {
|
|
gc_collect_start();
|
|
gc_helper_collect_regs_and_stack();
|
|
gc_collect_end();
|
|
}
|
|
|
|
// There is no filesystem so stat'ing returns nothing.
|
|
mp_import_stat_t mp_import_stat(const char *path) {
|
|
return MP_IMPORT_STAT_NO_EXIST;
|
|
}
|
|
|
|
// There is no filesystem so opening a file raises an exception.
|
|
mp_lexer_t *mp_lexer_new_from_file(const char *filename) {
|
|
mp_raise_OSError(MP_ENOENT);
|
|
}
|
|
|
|
We also need a Makefile at this point for the port:
|
|
|
|
.. code-block:: Makefile
|
|
|
|
# Include the core environment definitions; this will set $(TOP).
|
|
include ../../py/mkenv.mk
|
|
|
|
# Include py core make definitions.
|
|
include $(TOP)/py/py.mk
|
|
include $(TOP)/extmod/extmod.mk
|
|
|
|
# Set CFLAGS and libraries.
|
|
CFLAGS += -I. -I$(BUILD) -I$(TOP)
|
|
LIBS += -lm
|
|
|
|
# Define the required source files.
|
|
SRC_C = \
|
|
main.c \
|
|
mphalport.c \
|
|
shared/readline/readline.c \
|
|
shared/runtime/gchelper_generic.c \
|
|
shared/runtime/pyexec.c \
|
|
shared/runtime/stdout_helpers.c \
|
|
|
|
# Define source files containung qstrs.
|
|
SRC_QSTR += shared/readline/readline.c shared/runtime/pyexec.c
|
|
|
|
# Define the required object files.
|
|
OBJ = $(PY_CORE_O) $(addprefix $(BUILD)/, $(SRC_C:.c=.o))
|
|
|
|
# Define the top-level target, the main firmware.
|
|
all: $(BUILD)/firmware.elf
|
|
|
|
# Define how to build the firmware.
|
|
$(BUILD)/firmware.elf: $(OBJ)
|
|
$(ECHO) "LINK $@"
|
|
$(Q)$(CC) $(LDFLAGS) -o $@ $^ $(LIBS)
|
|
$(Q)$(SIZE) $@
|
|
|
|
# Include remaining core make rules.
|
|
include $(TOP)/py/mkrules.mk
|
|
|
|
Remember to use proper tabs to indent the Makefile.
|
|
|
|
MicroPython Configurations
|
|
--------------------------
|
|
|
|
After integrating the minimal code above, the next step is to create the MicroPython
|
|
configuration files for the port. The compile-time configurations are specified in
|
|
``mpconfigport.h`` and additional hardware-abstraction functions, such as time keeping,
|
|
in ``mphalport.h``.
|
|
|
|
The following is an example of an ``mpconfigport.h`` file:
|
|
|
|
.. code-block:: c
|
|
|
|
#include <stdint.h>
|
|
|
|
// Python internal features.
|
|
#define MICROPY_ENABLE_GC (1)
|
|
#define MICROPY_HELPER_REPL (1)
|
|
#define MICROPY_ERROR_REPORTING (MICROPY_ERROR_REPORTING_TERSE)
|
|
#define MICROPY_FLOAT_IMPL (MICROPY_FLOAT_IMPL_FLOAT)
|
|
|
|
// Fine control over Python builtins, classes, modules, etc.
|
|
#define MICROPY_PY_ASYNC_AWAIT (0)
|
|
#define MICROPY_PY_BUILTINS_SET (0)
|
|
#define MICROPY_PY_ATTRTUPLE (0)
|
|
#define MICROPY_PY_COLLECTIONS (0)
|
|
#define MICROPY_PY_MATH (0)
|
|
#define MICROPY_PY_IO (0)
|
|
#define MICROPY_PY_STRUCT (0)
|
|
|
|
// Type definitions for the specific machine.
|
|
|
|
typedef intptr_t mp_int_t; // must be pointer size
|
|
typedef uintptr_t mp_uint_t; // must be pointer size
|
|
typedef long mp_off_t;
|
|
|
|
// We need to provide a declaration/definition of alloca().
|
|
#include <alloca.h>
|
|
|
|
// Define the port's name and hardware.
|
|
#define MICROPY_HW_BOARD_NAME "example-board"
|
|
#define MICROPY_HW_MCU_NAME "unknown-cpu"
|
|
|
|
#define MP_STATE_PORT MP_STATE_VM
|
|
|
|
This configuration file contains machine-specific configurations including aspects like if different
|
|
MicroPython features should be enabled e.g. ``#define MICROPY_ENABLE_GC (1)``. Making this Setting
|
|
``(0)`` disables the feature.
|
|
|
|
Other configurations include type definitions, root pointers, board name, microcontroller name
|
|
etc.
|
|
|
|
Similarly, an minimal example ``mphalport.h`` file looks like this:
|
|
|
|
.. code-block:: c
|
|
|
|
static inline void mp_hal_set_interrupt_char(char c) {}
|
|
|
|
Support for standard input/output
|
|
---------------------------------
|
|
|
|
MicroPython requires at least a way to output characters, and to have a REPL it also
|
|
requires a way to input characters. Functions for this can be implemented in the file
|
|
``mphalport.c``, for example:
|
|
|
|
.. code-block:: c
|
|
|
|
#include <unistd.h>
|
|
#include "py/mpconfig.h"
|
|
|
|
// Receive single character, blocking until one is available.
|
|
int mp_hal_stdin_rx_chr(void) {
|
|
unsigned char c = 0;
|
|
int r = read(STDIN_FILENO, &c, 1);
|
|
(void)r;
|
|
return c;
|
|
}
|
|
|
|
// Send the string of given length.
|
|
void mp_hal_stdout_tx_strn(const char *str, mp_uint_t len) {
|
|
int r = write(STDOUT_FILENO, str, len);
|
|
(void)r;
|
|
}
|
|
|
|
These input and output functions have to be modified depending on the
|
|
specific board API. This example uses the standard input/output stream.
|
|
|
|
Building and running
|
|
--------------------
|
|
|
|
At this stage the directory of the new port should contain::
|
|
|
|
ports/example_port/
|
|
├── main.c
|
|
├── Makefile
|
|
├── mpconfigport.h
|
|
├── mphalport.c
|
|
└── mphalport.h
|
|
|
|
The port can now be built by running ``make`` (or otherwise, depending on your system).
|
|
|
|
If you are using the default compiler settings in the Makefile given above then this
|
|
will create an executable called ``build/firmware.elf`` which can be executed directly.
|
|
To get a functional REPL you may need to first configure the terminal to raw mode:
|
|
|
|
.. code-block:: bash
|
|
|
|
$ stty raw opost -echo
|
|
$ ./build/firmware.elf
|
|
|
|
That should give a MicroPython REPL. You can then run commands like:
|
|
|
|
.. code-block:: bash
|
|
|
|
MicroPython v1.13 on 2021-01-01; example-board with unknown-cpu
|
|
>>> import sys
|
|
>>> sys.implementation
|
|
('micropython', (1, 13, 0))
|
|
>>>
|
|
|
|
Use Ctrl-D to exit, and then run ``reset`` to reset the terminal.
|
|
|
|
Adding a module to the port
|
|
---------------------------
|
|
|
|
To add a custom module like ``myport``, first add the module definition in a file
|
|
``modmyport.c``:
|
|
|
|
.. code-block:: c
|
|
|
|
#include "py/runtime.h"
|
|
|
|
STATIC mp_obj_t myport_info(void) {
|
|
mp_printf(&mp_plat_print, "info about my port\n");
|
|
return mp_const_none;
|
|
}
|
|
STATIC MP_DEFINE_CONST_FUN_OBJ_0(myport_info_obj, myport_info);
|
|
|
|
STATIC const mp_rom_map_elem_t myport_module_globals_table[] = {
|
|
{ MP_OBJ_NEW_QSTR(MP_QSTR___name__), MP_OBJ_NEW_QSTR(MP_QSTR_myport) },
|
|
{ MP_ROM_QSTR(MP_QSTR_info), MP_ROM_PTR(&myport_info_obj) },
|
|
};
|
|
STATIC MP_DEFINE_CONST_DICT(myport_module_globals, myport_module_globals_table);
|
|
|
|
const mp_obj_module_t myport_module = {
|
|
.base = { &mp_type_module },
|
|
.globals = (mp_obj_dict_t *)&myport_module_globals,
|
|
};
|
|
|
|
MP_REGISTER_MODULE(MP_QSTR_myport, myport_module);
|
|
|
|
You will also need to edit the Makefile to add ``modmyport.c`` to the ``SRC_C`` list, and
|
|
a new line adding the same file to ``SRC_QSTR`` (so qstrs are searched for in this new file),
|
|
like this:
|
|
|
|
.. code-block:: Makefile
|
|
|
|
SRC_C = \
|
|
main.c \
|
|
modmyport.c \
|
|
mphalport.c \
|
|
...
|
|
|
|
SRC_QSTR += modmyport.c
|
|
|
|
If all went correctly then, after rebuilding, you should be able to import the new module:
|
|
|
|
.. code-block:: bash
|
|
|
|
>>> import myport
|
|
>>> myport.info()
|
|
info about my port
|
|
>>>
|