micropython/ports/cc3200/hal/inc/hw_des.h

340 wiersze
19 KiB
C
Czysty Wina Historia

This file contains ambiguous Unicode characters!

This file contains ambiguous Unicode characters that may be confused with others in your current locale. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to highlight these characters.

//*****************************************************************************
//
// Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
//
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions
// are met:
//
// Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//
// Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the
// distribution.
//
// Neither the name of Texas Instruments Incorporated nor the names of
// its contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
//*****************************************************************************
#ifndef __HW_DES_H__
#define __HW_DES_H__
//*****************************************************************************
//
// The following are defines for the DES_P register offsets.
//
//*****************************************************************************
#define DES_O_KEY3_L 0x00000000 // KEY3 (LSW) for 192-bit key
#define DES_O_KEY3_H 0x00000004 // KEY3 (MSW) for 192-bit key
#define DES_O_KEY2_L 0x00000008 // KEY2 (LSW) for 192-bit key
#define DES_O_KEY2_H 0x0000000C // KEY2 (MSW) for 192-bit key
#define DES_O_KEY1_L 0x00000010 // KEY1 (LSW) for 128-bit
// key/192-bit key
#define DES_O_KEY1_H 0x00000014 // KEY1 (LSW) for 128-bit
// key/192-bit key
#define DES_O_IV_L 0x00000018 // Initialization vector LSW
#define DES_O_IV_H 0x0000001C // Initialization vector MSW
#define DES_O_CTRL 0x00000020
#define DES_O_LENGTH 0x00000024 // Indicates the cryptographic data
// length in bytes for all modes.
// Once processing is started with
// this context this length
// decrements to zero. Data lengths
// up to (2^32 – 1) bytes are
// allowed. A write to this register
// triggers the engine to start
// using this context. For a Host
// read operation these registers
// return all-zeroes.
#define DES_O_DATA_L 0x00000028 // Data register(LSW) to read/write
// encrypted/decrypted data.
#define DES_O_DATA_H 0x0000002C // Data register(MSW) to read/write
// encrypted/decrypted data.
#define DES_O_REVISION 0x00000030
#define DES_O_SYSCONFIG 0x00000034
#define DES_O_SYSSTATUS 0x00000038
#define DES_O_IRQSTATUS 0x0000003C // This register indicates the
// interrupt status. If one of the
// interrupt bits is set the
// interrupt output will be asserted
#define DES_O_IRQENABLE 0x00000040 // This register contains an enable
// bit for each unique interrupt
// generated by the module. It
// matches the layout of
// DES_IRQSTATUS register. An
// interrupt is enabled when the bit
// in this register is set to 1
//******************************************************************************
//
// The following are defines for the bit fields in the DES_O_KEY3_L register.
//
//******************************************************************************
#define DES_KEY3_L_KEY3_L_M 0xFFFFFFFF // data for key3
#define DES_KEY3_L_KEY3_L_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the DES_O_KEY3_H register.
//
//******************************************************************************
#define DES_KEY3_H_KEY3_H_M 0xFFFFFFFF // data for key3
#define DES_KEY3_H_KEY3_H_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the DES_O_KEY2_L register.
//
//******************************************************************************
#define DES_KEY2_L_KEY2_L_M 0xFFFFFFFF // data for key2
#define DES_KEY2_L_KEY2_L_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the DES_O_KEY2_H register.
//
//******************************************************************************
#define DES_KEY2_H_KEY2_H_M 0xFFFFFFFF // data for key2
#define DES_KEY2_H_KEY2_H_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the DES_O_KEY1_L register.
//
//******************************************************************************
#define DES_KEY1_L_KEY1_L_M 0xFFFFFFFF // data for key1
#define DES_KEY1_L_KEY1_L_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the DES_O_KEY1_H register.
//
//******************************************************************************
#define DES_KEY1_H_KEY1_H_M 0xFFFFFFFF // data for key1
#define DES_KEY1_H_KEY1_H_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the DES_O_IV_L register.
//
//******************************************************************************
#define DES_IV_L_IV_L_M 0xFFFFFFFF // initialization vector for CBC
// CFB modes
#define DES_IV_L_IV_L_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the DES_O_IV_H register.
//
//******************************************************************************
#define DES_IV_H_IV_H_M 0xFFFFFFFF // initialization vector for CBC
// CFB modes
#define DES_IV_H_IV_H_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the DES_O_CTRL register.
//
//******************************************************************************
#define DES_CTRL_CONTEXT 0x80000000 // If 1 this read-only status bit
// indicates that the context data
// registers can be overwritten and
// the host is permitted to write
// the next context.
#define DES_CTRL_MODE_M 0x00000030 // Select CBC ECB or CFB mode 0x0
// ecb mode 0x1 cbc mode 0x2 cfb
// mode 0x3 reserved
#define DES_CTRL_MODE_S 4
#define DES_CTRL_TDES 0x00000008 // Select DES or triple DES
// encryption/decryption. 0 des mode
// 1 tdes mode
#define DES_CTRL_DIRECTION 0x00000004 // select encryption/decryption 0
// decryption is selected 1
// Encryption is selected
#define DES_CTRL_INPUT_READY 0x00000002 // When '1' ready to
// encrypt/decrypt data
#define DES_CTRL_OUTPUT_READY 0x00000001 // When '1' Data
// decrypted/encrypted ready
//******************************************************************************
//
// The following are defines for the bit fields in the DES_O_LENGTH register.
//
//******************************************************************************
#define DES_LENGTH_LENGTH_M 0xFFFFFFFF
#define DES_LENGTH_LENGTH_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the DES_O_DATA_L register.
//
//******************************************************************************
#define DES_DATA_L_DATA_L_M 0xFFFFFFFF // data for encryption/decryption
#define DES_DATA_L_DATA_L_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the DES_O_DATA_H register.
//
//******************************************************************************
#define DES_DATA_H_DATA_H_M 0xFFFFFFFF // data for encryption/decryption
#define DES_DATA_H_DATA_H_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the DES_O_REVISION register.
//
//******************************************************************************
#define DES_REVISION_SCHEME_M 0xC0000000
#define DES_REVISION_SCHEME_S 30
#define DES_REVISION_FUNC_M 0x0FFF0000 // Function indicates a software
// compatible module family. If
// there is no level of software
// compatibility a new Func number
// (and hence REVISION) should be
// assigned.
#define DES_REVISION_FUNC_S 16
#define DES_REVISION_R_RTL_M 0x0000F800 // RTL Version (R) maintained by IP
// design owner. RTL follows a
// numbering such as X.Y.R.Z which
// are explained in this table. R
// changes ONLY when: (1) PDS
// uploads occur which may have been
// due to spec changes (2) Bug fixes
// occur (3) Resets to '0' when X or
// Y changes. Design team has an
// internal 'Z' (customer invisible)
// number which increments on every
// drop that happens due to DV and
// RTL updates. Z resets to 0 when R
// increments.
#define DES_REVISION_R_RTL_S 11
#define DES_REVISION_X_MAJOR_M \
0x00000700 // Major Revision (X) maintained by
// IP specification owner. X changes
// ONLY when: (1) There is a major
// feature addition. An example
// would be adding Master Mode to
// Utopia Level2. The Func field (or
// Class/Type in old PID format)
// will remain the same. X does NOT
// change due to: (1) Bug fixes (2)
// Change in feature parameters.
#define DES_REVISION_X_MAJOR_S 8
#define DES_REVISION_CUSTOM_M 0x000000C0
#define DES_REVISION_CUSTOM_S 6
#define DES_REVISION_Y_MINOR_M \
0x0000003F // Minor Revision (Y) maintained by
// IP specification owner. Y changes
// ONLY when: (1) Features are
// scaled (up or down). Flexibility
// exists in that this feature
// scalability may either be
// represented in the Y change or a
// specific register in the IP that
// indicates which features are
// exactly available. (2) When
// feature creeps from Is-Not list
// to Is list. But this may not be
// the case once it sees silicon; in
// which case X will change. Y does
// NOT change due to: (1) Bug fixes
// (2) Typos or clarifications (3)
// major functional/feature
// change/addition/deletion. Instead
// these changes may be reflected
// via R S X as applicable. Spec
// owner maintains a
// customer-invisible number 'S'
// which changes due to: (1)
// Typos/clarifications (2) Bug
// documentation. Note that this bug
// is not due to a spec change but
// due to implementation.
// Nevertheless the spec tracks the
// IP bugs. An RTL release (say for
// silicon PG1.1) that occurs due to
// bug fix should document the
// corresponding spec number (X.Y.S)
// in its release notes.
#define DES_REVISION_Y_MINOR_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the DES_O_SYSCONFIG register.
//
//******************************************************************************
#define DES_SYSCONFIG_DMA_REQ_CONTEXT_IN_EN \
0x00000080 // If set to 1 the DMA context
// request is enabled. 0 Dma
// disabled 1 Dma enabled
#define DES_SYSCONFIG_DMA_REQ_DATA_OUT_EN \
0x00000040 // If set to 1 the DMA output
// request is enabled. 0 Dma
// disabled 1 Dma enabled
#define DES_SYSCONFIG_DMA_REQ_DATA_IN_EN \
0x00000020 // If set to 1 the DMA input
// request is enabled. 0 Dma
// disabled 1 Dma enabled
//******************************************************************************
//
// The following are defines for the bit fields in the DES_O_SYSSTATUS register.
//
//******************************************************************************
#define DES_SYSSTATUS_RESETDONE \
0x00000001
//******************************************************************************
//
// The following are defines for the bit fields in the DES_O_IRQSTATUS register.
//
//******************************************************************************
#define DES_IRQSTATUS_DATA_OUT \
0x00000004 // This bit indicates data output
// interrupt is active and triggers
// the interrupt output.
#define DES_IRQSTATUS_DATA_IN 0x00000002 // This bit indicates data input
// interrupt is active and triggers
// the interrupt output.
#define DES_IRQSTATUS_CONTEX_IN \
0x00000001 // This bit indicates context
// interrupt is active and triggers
// the interrupt output.
//******************************************************************************
//
// The following are defines for the bit fields in the DES_O_IRQENABLE register.
//
//******************************************************************************
#define DES_IRQENABLE_M_DATA_OUT \
0x00000004 // If this bit is set to 1 the
// secure data output interrupt is
// enabled.
#define DES_IRQENABLE_M_DATA_IN \
0x00000002 // If this bit is set to 1 the
// secure data input interrupt is
// enabled.
#define DES_IRQENABLE_M_CONTEX_IN \
0x00000001 // If this bit is set to 1 the
// secure context interrupt is
// enabled.
#endif // __HW_DES_H__