mirror
/
micropython
kopia lustrzana https://github.com/micropython/micropython
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
micropython/ports/cc3200/hal/inc/hw_common_reg.h

1118 wiersze
60 KiB
C
Czysty Wina Historia

This file contains ambiguous Unicode characters!

This file contains ambiguous Unicode characters that may be confused with others in your current locale. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to highlight these characters.

//*****************************************************************************
//
// Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
//
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions
// are met:
//
// Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//
// Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the
// distribution.
//
// Neither the name of Texas Instruments Incorporated nor the names of
// its contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
//*****************************************************************************
#ifndef __HW_COMMON_REG_H__
#define __HW_COMMON_REG_H__
//*****************************************************************************
//
// The following are defines for the COMMON_REG register offsets.
//
//*****************************************************************************
#define COMMON_REG_O_I2C_Properties_Register \
0x00000000
#define COMMON_REG_O_SPI_Properties_Register \
0x00000004
#define COMMON_REG_O_APPS_sh_resource_Interrupt_enable \
0x0000000C
#define COMMON_REG_O_APPS_sh_resource_Interrupt_status \
0x00000010
#define COMMON_REG_O_NWP_sh_resource_Interrupt_enable \
0x00000014
#define COMMON_REG_O_NWP_sh_resource_Interrupt_status \
0x00000018
#define COMMON_REG_O_Flash_ctrl_reg \
0x0000001C
#define COMMON_REG_O_Bus_matrix_M0_segment_access_config \
0x00000024
#define COMMON_REG_O_Bus_matrix_M1_segment_access_config \
0x00000028
#define COMMON_REG_O_Bus_matrix_M2_segment_access_config \
0x0000002C
#define COMMON_REG_O_Bus_matrix_M3_segment_access_config \
0x00000030
#define COMMON_REG_O_Bus_matrix_M4_segment_access_config \
0x00000034
#define COMMON_REG_O_Bus_matrix_M5_segment_access_config \
0x00000038
#define COMMON_REG_O_GPIO_properties_register \
0x0000003C
#define COMMON_REG_O_APPS_NW_SEMAPHORE1 \
0x00000040
#define COMMON_REG_O_APPS_NW_SEMAPHORE2 \
0x00000044
#define COMMON_REG_O_APPS_NW_SEMAPHORE3 \
0x00000048
#define COMMON_REG_O_APPS_NW_SEMAPHORE4 \
0x0000004C
#define COMMON_REG_O_APPS_NW_SEMAPHORE5 \
0x00000050
#define COMMON_REG_O_APPS_NW_SEMAPHORE6 \
0x00000054
#define COMMON_REG_O_APPS_NW_SEMAPHORE7 \
0x00000058
#define COMMON_REG_O_APPS_NW_SEMAPHORE8 \
0x0000005C
#define COMMON_REG_O_APPS_NW_SEMAPHORE9 \
0x00000060
#define COMMON_REG_O_APPS_NW_SEMAPHORE10 \
0x00000064
#define COMMON_REG_O_APPS_NW_SEMAPHORE11 \
0x00000068
#define COMMON_REG_O_APPS_NW_SEMAPHORE12 \
0x0000006C
#define COMMON_REG_O_APPS_SEMAPPHORE_PEND \
0x00000070
#define COMMON_REG_O_NW_SEMAPPHORE_PEND \
0x00000074
#define COMMON_REG_O_SEMAPHORE_STATUS \
0x00000078
#define COMMON_REG_O_IDMEM_TIM_Update \
0x0000007C
#define COMMON_REG_O_FPGA_ROM_WR_EN \
0x00000080
#define COMMON_REG_O_NW_INT_MASK \
0x00000084
#define COMMON_REG_O_NW_INT_MASK_SET \
0x00000088
#define COMMON_REG_O_NW_INT_MASK_CLR \
0x0000008C
#define COMMON_REG_O_NW_INT_STS_CLR \
0x00000090
#define COMMON_REG_O_NW_INT_ACK 0x00000094
#define COMMON_REG_O_NW_INT_TRIG \
0x00000098
#define COMMON_REG_O_NW_INT_STS_MASKED \
0x0000009C
#define COMMON_REG_O_NW_INT_STS_RAW \
0x000000A0
#define COMMON_REG_O_APPS_INT_MASK \
0x000000A4
#define COMMON_REG_O_APPS_INT_MASK_SET \
0x000000A8
#define COMMON_REG_O_APPS_INT_MASK_CLR \
0x000000AC
#define COMMON_REG_O_APPS_INT_STS_CLR \
0x000000B0
#define COMMON_REG_O_APPS_INT_ACK \
0x000000B4
#define COMMON_REG_O_APPS_INT_TRIG \
0x000000B8
#define COMMON_REG_O_APPS_INT_STS_MASKED \
0x000000BC
#define COMMON_REG_O_APPS_INT_STS_RAW \
0x000000C0
#define COMMON_REG_O_IDMEM_TIM_Updated \
0x000000C4
#define COMMON_REG_O_APPS_GPIO_TRIG_EN \
0x000000C8
#define COMMON_REG_O_EMU_DEBUG_REG \
0x000000CC
#define COMMON_REG_O_SEMAPHORE_STATUS2 \
0x000000D0
#define COMMON_REG_O_SEMAPHORE_PREV_OWNER1 \
0x000000D4
#define COMMON_REG_O_SEMAPHORE_PREV_OWNER2 \
0x000000D8
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_I2C_Properties_Register register.
//
//******************************************************************************
#define COMMON_REG_I2C_Properties_Register_I2C_Properties_Register_M \
0x00000003 // • Each semaphore register is of
// 2 bit. • When this register is
// set to 2’b01 – Apps have access
// and when set to 2’b10 – NW have
// access. • Ideally both the master
// can modify any of this 2 bit, but
// assumption apps will write only
// 2’b01 or 2’b00 to this register
// and nw will write only 2’b10 or
// 2’b00. • Implementation is when
// any of the bit of this register
// is set, only next write
// allowedvis 2’b00 – Again
// assumption is one master will not
// write 2’b00 if other is already
// holding the semaphore.
#define COMMON_REG_I2C_Properties_Register_I2C_Properties_Register_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_SPI_Properties_Register register.
//
//******************************************************************************
#define COMMON_REG_SPI_Properties_Register_SPI_Properties_Register_M \
0x00000003 // • Each semaphore register is of
// 2 bit. • When this register is
// set to 2’b01 – Apps have access
// and when set to 2’b10 – NW have
// access. • Ideally both the master
// can modify any of this 2 bit, but
// assumption apps will write only
// 2’b01 or 2’b00 to this register
// and nw will write only 2’b10 or
// 2’b00. • Implementation is when
// any of the bit of this register
// is set, only next write
// allowedvis 2’b00 – Again
// assumption is one master will not
// write 2’b00 if other is already
// holding the semaphore.
#define COMMON_REG_SPI_Properties_Register_SPI_Properties_Register_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_APPS_sh_resource_Interrupt_enable register.
//
//******************************************************************************
#define COMMON_REG_APPS_sh_resource_Interrupt_enable_APPS_sh_resource_Interrupt_enable_M \
0x0000000F // Interrupt enable APPS bit 0 ->
// when '1' enable I2C interrupt bit
// 1 -> when '1' enable SPI
// interrupt bit 3 ->
// when '1' enable GPIO interrupt
#define COMMON_REG_APPS_sh_resource_Interrupt_enable_APPS_sh_resource_Interrupt_enable_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_APPS_sh_resource_Interrupt_status register.
//
//******************************************************************************
#define COMMON_REG_APPS_sh_resource_Interrupt_status_APPS_sh_resource_Interrupt_status_M \
0x0000000F // Interrupt enable APPS bit 0 ->
// when '1' enable I2C interrupt bit
// 1 -> when '1' enable SPI
// interrupt bit 3 ->
// when '1' enable GPIO interrupt
#define COMMON_REG_APPS_sh_resource_Interrupt_status_APPS_sh_resource_Interrupt_status_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_NWP_sh_resource_Interrupt_enable register.
//
//******************************************************************************
#define COMMON_REG_NWP_sh_resource_Interrupt_enable_NWP_sh_resource_Interrupt_enable_M \
0x0000000F // Interrupt enable NWP bit 0 ->
// when '1' enable I2C interrupt bit
// 1 -> when '1' enable SPI
// interrupt bit 3 ->
// when '1' enable GPIO interrupt
#define COMMON_REG_NWP_sh_resource_Interrupt_enable_NWP_sh_resource_Interrupt_enable_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_NWP_sh_resource_Interrupt_status register.
//
//******************************************************************************
#define COMMON_REG_NWP_sh_resource_Interrupt_status_NWP_sh_resource_Interrupt_status_M \
0x0000000F // Interrupt enable NWP bit 0 ->
// when '1' enable I2C interrupt bit
// 1 -> when '1' enable SPI
// interrupt bit 3 ->
// when '1' enable GPIO interrupt
#define COMMON_REG_NWP_sh_resource_Interrupt_status_NWP_sh_resource_Interrupt_status_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_Flash_ctrl_reg register.
//
//******************************************************************************
#define COMMON_REG_Flash_ctrl_reg_Flash_ctrl_reg_M \
0x00000003 // • Each semaphore register is of
// 2 bit. • When this register is
// set to 2’b01 – Apps have access
// and when set to 2’b10 – NW have
// access. • Ideally both the master
// can modify any of this 2 bit, but
// assumption apps will write only
// 2’b01 or 2’b00 to this register
// and nw will write only 2’b10 or
// 2’b00. • Implementation is when
// any of the bit of this register
// is set, only next write
// allowedvis 2’b00 – Again
// assumption is one master will not
// write 2’b00 if other is already
// holding the semaphore.
#define COMMON_REG_Flash_ctrl_reg_Flash_ctrl_reg_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_Bus_matrix_M0_segment_access_config register.
//
//******************************************************************************
#define COMMON_REG_Bus_matrix_M0_segment_access_config_Bus_matrix_M0_segment_access_config_M \
0x0003FFFF // Master 0 control word matrix to
// each segment. Tieoff. Bit value 1
// indicates segment is accesable.
#define COMMON_REG_Bus_matrix_M0_segment_access_config_Bus_matrix_M0_segment_access_config_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_Bus_matrix_M1_segment_access_config register.
//
//******************************************************************************
#define COMMON_REG_Bus_matrix_M1_segment_access_config_Bus_matrix_M1_segment_access_config_M \
0x0003FFFF // Master 1 control word matrix to
// each segment. Tieoff. Bit value 1
// indicates segment is accesable.
#define COMMON_REG_Bus_matrix_M1_segment_access_config_Bus_matrix_M1_segment_access_config_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_Bus_matrix_M2_segment_access_config register.
//
//******************************************************************************
#define COMMON_REG_Bus_matrix_M2_segment_access_config_Bus_matrix_M2_segment_access_config_M \
0x0003FFFF // Master 2 control word matrix to
// each segment. Tieoff. Bit value 1
// indicates segment is accesable.
#define COMMON_REG_Bus_matrix_M2_segment_access_config_Bus_matrix_M2_segment_access_config_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_Bus_matrix_M3_segment_access_config register.
//
//******************************************************************************
#define COMMON_REG_Bus_matrix_M3_segment_access_config_Bus_matrix_M3_segment_access_config_M \
0x0003FFFF // Master 3 control word matrix to
// each segment. Tieoff. Bit value 1
// indicates segment is accesable.
#define COMMON_REG_Bus_matrix_M3_segment_access_config_Bus_matrix_M3_segment_access_config_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_Bus_matrix_M4_segment_access_config register.
//
//******************************************************************************
#define COMMON_REG_Bus_matrix_M4_segment_access_config_Bus_matrix_M4_segment_access_config_M \
0x0003FFFF // Master 4 control word matrix to
// each segment. Tieoff. Bit value 1
// indicates segment is accesable.
#define COMMON_REG_Bus_matrix_M4_segment_access_config_Bus_matrix_M4_segment_access_config_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_Bus_matrix_M5_segment_access_config register.
//
//******************************************************************************
#define COMMON_REG_Bus_matrix_M5_segment_access_config_Bus_matrix_M5_segment_access_config_M \
0x0003FFFF // Master 5 control word matrix to
// each segment. Tieoff. Bit value 1
// indicates segment is accesable.
#define COMMON_REG_Bus_matrix_M5_segment_access_config_Bus_matrix_M5_segment_access_config_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_GPIO_properties_register register.
//
//******************************************************************************
#define COMMON_REG_GPIO_properties_register_GPIO_properties_register_M \
0x000003FF // Shared GPIO configuration
// register. Bit [1:0] to configure
// GPIO0 Bit [3:2] to configure
// GPIO1 Bit [5:4] to configure
// GPIO2 Bit [7:6] to configure
// GPIO3 Bit [9:8] to configure
// GPIO4 each GPIO can be
// individully selected. When “00”
// GPIO is free resource. When “01”
// GPIO is APPS resource. When “10”
// GPIO is NWP resource. Writing 11
// doesnt have any affect, i.e. If
// one write only relevant gpio
// semaphore and other bits are 1s,
// it'll not disturb the other
// semaphore bits. For example : Say
// If NW wants to take control of
// gpio-1, one should write
// 10'b11_1111_1011 and if one wants
// to release it write
// 10'b11_1111_0011.
#define COMMON_REG_GPIO_properties_register_GPIO_properties_register_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_APPS_NW_SEMAPHORE1 register.
//
//******************************************************************************
#define COMMON_REG_APPS_NW_SEMAPHORE1_APPS_NW_SEMAPHORE1_M \
0xFFFFFFFF // • Each semaphore register is of
// 2 bit. • When this register is
// set to 2’b01 – Apps have access
// and when set to 2’b10 – NW have
// access. • Ideally both the master
// can modify any of this 2 bit, but
// assumption apps will write only
// 2’b01 or 2’b00 to this register
// and nw will write only 2’b10 or
// 2’b00. • Implementation is when
// any of the bit of this register
// is set, only next write
// allowedvis 2’b00 – Again
// assumption is one master will not
// write 2’b00 if other is already
// holding the semaphore.
#define COMMON_REG_APPS_NW_SEMAPHORE1_APPS_NW_SEMAPHORE1_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_APPS_NW_SEMAPHORE2 register.
//
//******************************************************************************
#define COMMON_REG_APPS_NW_SEMAPHORE2_APPS_NW_SEMAPHORE2_M \
0xFFFFFFFF // • Each semaphore register is of
// 2 bit. • When this register is
// set to 2’b01 – Apps have access
// and when set to 2’b10 – NW have
// access. • Ideally both the master
// can modify any of this 2 bit, but
// assumption apps will write only
// 2’b01 or 2’b00 to this register
// and nw will write only 2’b10 or
// 2’b00. • Implementation is when
// any of the bit of this register
// is set, only next write
// allowedvis 2’b00 – Again
// assumption is one master will not
// write 2’b00 if other is already
// holding the semaphore.
#define COMMON_REG_APPS_NW_SEMAPHORE2_APPS_NW_SEMAPHORE2_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_APPS_NW_SEMAPHORE3 register.
//
//******************************************************************************
#define COMMON_REG_APPS_NW_SEMAPHORE3_APPS_NW_SEMAPHORE3_M \
0xFFFFFFFF // • Each semaphore register is of
// 2 bit. • When this register is
// set to 2’b01 – Apps have access
// and when set to 2’b10 – NW have
// access. • Ideally both the master
// can modify any of this 2 bit, but
// assumption apps will write only
// 2’b01 or 2’b00 to this register
// and nw will write only 2’b10 or
// 2’b00. • Implementation is when
// any of the bit of this register
// is set, only next write
// allowedvis 2’b00 – Again
// assumption is one master will not
// write 2’b00 if other is already
// holding the semaphore.
#define COMMON_REG_APPS_NW_SEMAPHORE3_APPS_NW_SEMAPHORE3_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_APPS_NW_SEMAPHORE4 register.
//
//******************************************************************************
#define COMMON_REG_APPS_NW_SEMAPHORE4_APPS_NW_SEMAPHORE4_M \
0xFFFFFFFF // • Each semaphore register is of
// 2 bit. • When this register is
// set to 2’b01 – Apps have access
// and when set to 2’b10 – NW have
// access. • Ideally both the master
// can modify any of this 2 bit, but
// assumption apps will write only
// 2’b01 or 2’b00 to this register
// and nw will write only 2’b10 or
// 2’b00. • Implementation is when
// any of the bit of this register
// is set, only next write
// allowedvis 2’b00 – Again
// assumption is one master will not
// write 2’b00 if other is already
// holding the semaphore.
#define COMMON_REG_APPS_NW_SEMAPHORE4_APPS_NW_SEMAPHORE4_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_APPS_NW_SEMAPHORE5 register.
//
//******************************************************************************
#define COMMON_REG_APPS_NW_SEMAPHORE5_APPS_NW_SEMAPHORE5_M \
0xFFFFFFFF // • Each semaphore register is of
// 2 bit. • When this register is
// set to 2’b01 – Apps have access
// and when set to 2’b10 – NW have
// access. • Ideally both the master
// can modify any of this 2 bit, but
// assumption apps will write only
// 2’b01 or 2’b00 to this register
// and nw will write only 2’b10 or
// 2’b00. • Implementation is when
// any of the bit of this register
// is set, only next write
// allowedvis 2’b00 – Again
// assumption is one master will not
// write 2’b00 if other is already
// holding the semaphore.
#define COMMON_REG_APPS_NW_SEMAPHORE5_APPS_NW_SEMAPHORE5_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_APPS_NW_SEMAPHORE6 register.
//
//******************************************************************************
#define COMMON_REG_APPS_NW_SEMAPHORE6_APPS_NW_SEMAPHORE6_M \
0xFFFFFFFF // • Each semaphore register is of
// 2 bit. • When this register is
// set to 2’b01 – Apps have access
// and when set to 2’b10 – NW have
// access. • Ideally both the master
// can modify any of this 2 bit, but
// assumption apps will write only
// 2’b01 or 2’b00 to this register
// and nw will write only 2’b10 or
// 2’b00. • Implementation is when
// any of the bit of this register
// is set, only next write
// allowedvis 2’b00 – Again
// assumption is one master will not
// write 2’b00 if other is already
// holding the semaphore.
#define COMMON_REG_APPS_NW_SEMAPHORE6_APPS_NW_SEMAPHORE6_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_APPS_NW_SEMAPHORE7 register.
//
//******************************************************************************
#define COMMON_REG_APPS_NW_SEMAPHORE7_APPS_NW_SEMAPHORE7_M \
0xFFFFFFFF // • Each semaphore register is of
// 2 bit. • When this register is
// set to 2’b01 – Apps have access
// and when set to 2’b10 – NW have
// access. • Ideally both the master
// can modify any of this 2 bit, but
// assumption apps will write only
// 2’b01 or 2’b00 to this register
// and nw will write only 2’b10 or
// 2’b00. • Implementation is when
// any of the bit of this register
// is set, only next write
// allowedvis 2’b00 – Again
// assumption is one master will not
// write 2’b00 if other is already
// holding the semaphore.
#define COMMON_REG_APPS_NW_SEMAPHORE7_APPS_NW_SEMAPHORE7_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_APPS_NW_SEMAPHORE8 register.
//
//******************************************************************************
#define COMMON_REG_APPS_NW_SEMAPHORE8_APPS_NW_SEMAPHORE8_M \
0xFFFFFFFF // • Each semaphore register is of
// 2 bit. • When this register is
// set to 2’b01 – Apps have access
// and when set to 2’b10 – NW have
// access. • Ideally both the master
// can modify any of this 2 bit, but
// assumption apps will write only
// 2’b01 or 2’b00 to this register
// and nw will write only 2’b10 or
// 2’b00. • Implementation is when
// any of the bit of this register
// is set, only next write
// allowedvis 2’b00 – Again
// assumption is one master will not
// write 2’b00 if other is already
// holding the semaphore.
#define COMMON_REG_APPS_NW_SEMAPHORE8_APPS_NW_SEMAPHORE8_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_APPS_NW_SEMAPHORE9 register.
//
//******************************************************************************
#define COMMON_REG_APPS_NW_SEMAPHORE9_APPS_NW_SEMAPHORE9_M \
0xFFFFFFFF // • Each semaphore register is of
// 2 bit. • When this register is
// set to 2’b01 – Apps have access
// and when set to 2’b10 – NW have
// access. • Ideally both the master
// can modify any of this 2 bit, but
// assumption apps will write only
// 2’b01 or 2’b00 to this register
// and nw will write only 2’b10 or
// 2’b00. • Implementation is when
// any of the bit of this register
// is set, only next write
// allowedvis 2’b00 – Again
// assumption is one master will not
// write 2’b00 if other is already
// holding the semaphore.
#define COMMON_REG_APPS_NW_SEMAPHORE9_APPS_NW_SEMAPHORE9_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_APPS_NW_SEMAPHORE10 register.
//
//******************************************************************************
#define COMMON_REG_APPS_NW_SEMAPHORE10_APPS_NW_SEMAPHORE10_M \
0xFFFFFFFF // • Each semaphore register is of
// 2 bit. • When this register is
// set to 2’b01 – Apps have access
// and when set to 2’b10 – NW have
// access. • Ideally both the master
// can modify any of this 2 bit, but
// assumption apps will write only
// 2’b01 or 2’b00 to this register
// and nw will write only 2’b10 or
// 2’b00. • Implementation is when
// any of the bit of this register
// is set, only next write
// allowedvis 2’b00 – Again
// assumption is one master will not
// write 2’b00 if other is already
// holding the semaphore.
#define COMMON_REG_APPS_NW_SEMAPHORE10_APPS_NW_SEMAPHORE10_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_APPS_NW_SEMAPHORE11 register.
//
//******************************************************************************
#define COMMON_REG_APPS_NW_SEMAPHORE11_APPS_NW_SEMAPHORE11_M \
0xFFFFFFFF // • Each semaphore register is of
// 2 bit. • When this register is
// set to 2’b01 – Apps have access
// and when set to 2’b10 – NW have
// access. • Ideally both the master
// can modify any of this 2 bit, but
// assumption apps will write only
// 2’b01 or 2’b00 to this register
// and nw will write only 2’b10 or
// 2’b00. • Implementation is when
// any of the bit of this register
// is set, only next write
// allowedvis 2’b00 – Again
// assumption is one master will not
// write 2’b00 if other is already
// holding the semaphore.
#define COMMON_REG_APPS_NW_SEMAPHORE11_APPS_NW_SEMAPHORE11_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_APPS_NW_SEMAPHORE12 register.
//
//******************************************************************************
#define COMMON_REG_APPS_NW_SEMAPHORE12_APPS_NW_SEMAPHORE12_M \
0xFFFFFFFF // APPS NW semaphore register - not
// reflected in status.
#define COMMON_REG_APPS_NW_SEMAPHORE12_APPS_NW_SEMAPHORE12_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_APPS_SEMAPPHORE_PEND register.
//
//******************************************************************************
#define COMMON_REG_APPS_SEMAPPHORE_PEND_APPS_SEMAPPHORE_PEND_M \
0xFFFFFFFF // APPS SEMAPOHORE STATUS
#define COMMON_REG_APPS_SEMAPPHORE_PEND_APPS_SEMAPPHORE_PEND_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_NW_SEMAPPHORE_PEND register.
//
//******************************************************************************
#define COMMON_REG_NW_SEMAPPHORE_PEND_NW_SEMAPPHORE_PEND_M \
0xFFFFFFFF // NW SEMAPHORE STATUS
#define COMMON_REG_NW_SEMAPPHORE_PEND_NW_SEMAPPHORE_PEND_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_SEMAPHORE_STATUS register.
//
//******************************************************************************
#define COMMON_REG_SEMAPHORE_STATUS_SEMAPHORE_STATUS_M \
0xFFFFFFFF // SEMAPHORE STATUS 9:8 :semaphore
// status of flash_control 7:6
// :semaphore status of
// gpio_properties 5:4
// :semaphore status of
// spi_propertie 1:0 :semaphore
// status of i2c_propertie
#define COMMON_REG_SEMAPHORE_STATUS_SEMAPHORE_STATUS_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_IDMEM_TIM_Update register.
//
//******************************************************************************
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_FPGA_ROM_WR_EN register.
//
//******************************************************************************
#define COMMON_REG_FPGA_ROM_WR_EN_FPGA_ROM_WR_EN \
0x00000001 // when '1' enables Write into
// IDMEM CORE ROM, APPS ROM, NWP ROM
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_NW_INT_MASK register.
//
//******************************************************************************
#define COMMON_REG_NW_INT_MASK_NW_INT_MASK_M \
0xFFFFFFFF // 1= disable corresponding
// interrupt;0 = interrupt enabled
#define COMMON_REG_NW_INT_MASK_NW_INT_MASK_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_NW_INT_MASK_SET register.
//
//******************************************************************************
#define COMMON_REG_NW_INT_MASK_SET_NW_INT_MASK_SET_M \
0xFFFFFFFF // write 1 to set corresponding bit
// in NW_INT_MASK;0 = no effect
#define COMMON_REG_NW_INT_MASK_SET_NW_INT_MASK_SET_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_NW_INT_MASK_CLR register.
//
//******************************************************************************
#define COMMON_REG_NW_INT_MASK_CLR_NW_INT_MASK_CLR_M \
0xFFFFFFFF // write 1 to clear corresponding
// bit in NW_INT_MASK;0 = no effect
#define COMMON_REG_NW_INT_MASK_CLR_NW_INT_MASK_CLR_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_NW_INT_STS_CLR register.
//
//******************************************************************************
#define COMMON_REG_NW_INT_STS_CLR_NW_INT_STS_CLR_M \
0xFFFFFFFF // write 1 to clear corresponding
// interrupt; 0 = no effect;
// interrupt is not lost if coincide
// with write operation
#define COMMON_REG_NW_INT_STS_CLR_NW_INT_STS_CLR_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_NW_INT_ACK register.
//
//******************************************************************************
#define COMMON_REG_NW_INT_ACK_NW_INT_ACK_M \
0xFFFFFFFF // write 1 to clear corresponding
// interrupt;0 = no effect
#define COMMON_REG_NW_INT_ACK_NW_INT_ACK_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_NW_INT_TRIG register.
//
//******************************************************************************
#define COMMON_REG_NW_INT_TRIG_NW_INT_TRIG_M \
0xFFFFFFFF // Writing a 1 to a bit in this
// register causes the the Host CPU
// if enabled (not masked). This
// register is self-clearing.
// Writing 0 has no effect
#define COMMON_REG_NW_INT_TRIG_NW_INT_TRIG_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_NW_INT_STS_MASKED register.
//
//******************************************************************************
#define COMMON_REG_NW_INT_STS_MASKED_NW_INT_STS_MASKED_M \
0xFFFFFFFF // 1= corresponding interrupt is
// active and not masked. read is
// non-destructive;0 = corresponding
// interrupt is inactive or masked
// by NW_INT mask
#define COMMON_REG_NW_INT_STS_MASKED_NW_INT_STS_MASKED_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_NW_INT_STS_RAW register.
//
//******************************************************************************
#define COMMON_REG_NW_INT_STS_RAW_NW_INT_STS_RAW_M \
0xFFFFFFFF // 1= corresponding interrupt is
// active. read is non-destructive;0
// = corresponding interrupt is
// inactive
#define COMMON_REG_NW_INT_STS_RAW_NW_INT_STS_RAW_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_APPS_INT_MASK register.
//
//******************************************************************************
#define COMMON_REG_APPS_INT_MASK_APPS_INT_MASK_M \
0xFFFFFFFF // 1= disable corresponding
// interrupt;0 = interrupt enabled
#define COMMON_REG_APPS_INT_MASK_APPS_INT_MASK_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_APPS_INT_MASK_SET register.
//
//******************************************************************************
#define COMMON_REG_APPS_INT_MASK_SET_APPS_INT_MASK_SET_M \
0xFFFFFFFF // write 1 to set corresponding bit
// in APPS_INT_MASK;0 = no effect
#define COMMON_REG_APPS_INT_MASK_SET_APPS_INT_MASK_SET_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_APPS_INT_MASK_CLR register.
//
//******************************************************************************
#define COMMON_REG_APPS_INT_MASK_CLR_APPS_INT_MASK_CLR_M \
0xFFFFFFFF // write 1 to clear corresponding
// bit in APPS_INT_MASK;0 = no
// effect
#define COMMON_REG_APPS_INT_MASK_CLR_APPS_INT_MASK_CLR_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_APPS_INT_STS_CLR register.
//
//******************************************************************************
#define COMMON_REG_APPS_INT_STS_CLR_APPS_INT_STS_CLR_M \
0xFFFFFFFF // write 1 to clear corresponding
// interrupt; 0 = no effect;
// interrupt is not lost if coincide
// with write operation
#define COMMON_REG_APPS_INT_STS_CLR_APPS_INT_STS_CLR_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_APPS_INT_ACK register.
//
//******************************************************************************
#define COMMON_REG_APPS_INT_ACK_APPS_INT_ACK_M \
0xFFFFFFFF // write 1 to clear corresponding
// interrupt;0 = no effect
#define COMMON_REG_APPS_INT_ACK_APPS_INT_ACK_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_APPS_INT_TRIG register.
//
//******************************************************************************
#define COMMON_REG_APPS_INT_TRIG_APPS_INT_TRIG_M \
0xFFFFFFFF // Writing a 1 to a bit in this
// register causes the the Host CPU
// if enabled (not masked). This
// register is self-clearing.
// Writing 0 has no effect
#define COMMON_REG_APPS_INT_TRIG_APPS_INT_TRIG_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_APPS_INT_STS_MASKED register.
//
//******************************************************************************
#define COMMON_REG_APPS_INT_STS_MASKED_APPS_INT_STS_MASKED_M \
0xFFFFFFFF // 1= corresponding interrupt is
// active and not masked. read is
// non-destructive;0 = corresponding
// interrupt is inactive or masked
// by APPS_INT mask
#define COMMON_REG_APPS_INT_STS_MASKED_APPS_INT_STS_MASKED_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_APPS_INT_STS_RAW register.
//
//******************************************************************************
#define COMMON_REG_APPS_INT_STS_RAW_APPS_INT_STS_RAW_M \
0xFFFFFFFF // 1= corresponding interrupt is
// active. read is non-destructive;0
// = corresponding interrupt is
// inactive
#define COMMON_REG_APPS_INT_STS_RAW_APPS_INT_STS_RAW_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_IDMEM_TIM_Updated register.
//
//******************************************************************************
#define COMMON_REG_IDMEM_TIM_Updated_TIM_UPDATED \
0x00000001 // toggle in this signal
// indicatesIDMEM_TIM_UPDATE
// register mentioned above is
// updated.
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_APPS_GPIO_TRIG_EN register.
//
//******************************************************************************
#define COMMON_REG_APPS_GPIO_TRIG_EN_APPS_GPIO_TRIG_EN_M \
0x0000001F // APPS GPIO Trigger EN control.
// Bit 0: when '1' enable GPIO 0
// trigger. This bit enables trigger
// for all GPIO 0 pins (GPIO 0 to
// GPIO7). Bit 1: when '1' enable
// GPIO 1 trigger. This bit enables
// trigger for all GPIO 1 pins (
// GPIO8 to GPIO15). Bit 2: when '1'
// enable GPIO 2 trigger. This bit
// enables trigger for all GPIO 2
// pins (GPIO16 to GPIO23). Bit 3:
// when '1' enable GPIO 3 trigger.
// This bit enables trigger for all
// GPIO 3 pins (GPIO24 to GPIO31).
// Bit 4: when '1' enable GPIO 4
// trigger. This bit enables trigger
// for all GPIO 4 pins.(GPIO32 to
// GPIO39)
#define COMMON_REG_APPS_GPIO_TRIG_EN_APPS_GPIO_TRIG_EN_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_EMU_DEBUG_REG register.
//
//******************************************************************************
#define COMMON_REG_EMU_DEBUG_REG_EMU_DEBUG_REG_M \
0xFFFFFFFF // 0 th bit used for stalling APPS
// DMA and 1st bit is used for
// stalling NWP DMA for debug
// purpose. Other bits are unused.
#define COMMON_REG_EMU_DEBUG_REG_EMU_DEBUG_REG_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_SEMAPHORE_STATUS2 register.
//
//******************************************************************************
#define COMMON_REG_SEMAPHORE_STATUS2_SEMPAPHORE_STATUS2_M \
0x00FFFFFF // SEMAPHORE STATUS 23:22
// :semaphore status of
// apps_nw_semaphore11 21:20
// :semaphore status of
// apps_nw_semaphore11 19:18
// :semaphore status of
// apps_nw_semaphore10 17:16
// :semaphore status of
// apps_nw_semaphore9 15:14
// :semaphore status of
// apps_nw_semaphore8 13:12
// :semaphore status of
// apps_nw_semaphore7 11:10
// :semaphore status of
// apps_nw_semaphore6 9:8 :semaphore
// status of apps_nw_semaphore5 7:6
// :semaphore status of
// apps_nw_semaphore4 5:4 :semaphore
// status of apps_nw_semaphore3 3:2
// :semaphore status of
// apps_nw_semaphore2 1:0 :semaphore
// status of apps_nw_semaphore1
#define COMMON_REG_SEMAPHORE_STATUS2_SEMPAPHORE_STATUS2_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_SEMAPHORE_PREV_OWNER1 register.
//
//******************************************************************************
#define COMMON_REG_SEMAPHORE_PREV_OWNER1_SEMAPHORE_PREV_OWNER1_M \
0x0003FFFF // 1:0 : prvious owner of
// i2c_properties_reg[1:0] 3:2 :
// prvious owner of
// spi_properties_reg[1:0] 5:4 :
// prvious owner of
// gpio_properties_reg[1:0] 9:8 :
// prvious owner of
// gpio_properties_reg[3:2] 11:10 :
// prvious owner of
// gpio_properties_reg[5:4] 13:12 :
// prvious owner of
// gpio_properties_reg[7:6] 15:14 :
// prvious owner of
// gpio_properties_reg[9:8] 17:16 :
// prvious owner of
// flash_control_reg[1:0]
#define COMMON_REG_SEMAPHORE_PREV_OWNER1_SEMAPHORE_PREV_OWNER1_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// COMMON_REG_O_SEMAPHORE_PREV_OWNER2 register.
//
//******************************************************************************
#define COMMON_REG_SEMAPHORE_PREV_OWNER2_SEMAPHORE_PREV_OWNER2_M \
0x00FFFFFF // 1:0 : previous owner of
// apps_nw_semaphore1_reg[1:0] 3:2 :
// previous owner of
// apps_nw_semaphore2_reg[1:0] 5:4 :
// previous owner of
// apps_nw_semaphore3_reg[1:0] 7:6 :
// previous owner of
// apps_nw_semaphore4_reg[1:0] 9:8 :
// previous owner of
// apps_nw_semaphore5_reg[1:0] 11:10
// : previous owner of
// apps_nw_semaphore6_reg[1:0] 13:12
// : previous owner of
// apps_nw_semaphore7_reg[1:0] 15:14
// : previous owner of
// apps_nw_semaphore8_reg[1:0] 17:16
// : previous owner of
// apps_nw_semaphore9_reg[1:0] 19:18
// : previous owner of
// apps_nw_semaphore10_reg[1:0]
// 21:20 : previous owner of
// apps_nw_semaphore11_reg[1:0]
// 23:22 : previous owner of
// apps_nw_semaphore12_reg[1:0]
#define COMMON_REG_SEMAPHORE_PREV_OWNER2_SEMAPHORE_PREV_OWNER2_S 0
#endif // __HW_COMMON_REG_H__
Reference in New Issue View Git Blame Kopiuj bezpośredni odnośnik