kopia lustrzana https://github.com/micropython/micropython
803 wiersze
48 KiB
C
803 wiersze
48 KiB
C
//*****************************************************************************
|
||
//
|
||
// Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
|
||
//
|
||
//
|
||
// Redistribution and use in source and binary forms, with or without
|
||
// modification, are permitted provided that the following conditions
|
||
// are met:
|
||
//
|
||
// Redistributions of source code must retain the above copyright
|
||
// notice, this list of conditions and the following disclaimer.
|
||
//
|
||
// Redistributions in binary form must reproduce the above copyright
|
||
// notice, this list of conditions and the following disclaimer in the
|
||
// documentation and/or other materials provided with the
|
||
// distribution.
|
||
//
|
||
// Neither the name of Texas Instruments Incorporated nor the names of
|
||
// its contributors may be used to endorse or promote products derived
|
||
// from this software without specific prior written permission.
|
||
//
|
||
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
||
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
||
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
||
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||
//
|
||
//*****************************************************************************
|
||
|
||
#ifndef __HW_AES_H__
|
||
#define __HW_AES_H__
|
||
|
||
//*****************************************************************************
|
||
//
|
||
// The following are defines for the AES_P register offsets.
|
||
//
|
||
//*****************************************************************************
|
||
#define AES_O_KEY2_6 0x00000000 // XTS second key / CBC-MAC third
|
||
// key
|
||
#define AES_O_KEY2_7 0x00000004 // XTS second key (MSW for 256-bit
|
||
// key) / CBC-MAC third key (MSW)
|
||
#define AES_O_KEY2_4 0x00000008 // XTS / CCM second key / CBC-MAC
|
||
// third key (LSW)
|
||
#define AES_O_KEY2_5 0x0000000C // XTS second key (MSW for 192-bit
|
||
// key) / CBC-MAC third key
|
||
#define AES_O_KEY2_2 0x00000010 // XTS / CCM / CBC-MAC second key /
|
||
// Hash Key input
|
||
#define AES_O_KEY2_3 0x00000014 // XTS second key (MSW for 128-bit
|
||
// key) + CCM/CBC-MAC second key
|
||
// (MSW) / Hash Key input (MSW)
|
||
#define AES_O_KEY2_0 0x00000018 // XTS / CCM / CBC-MAC second key
|
||
// (LSW) / Hash Key input (LSW)
|
||
#define AES_O_KEY2_1 0x0000001C // XTS / CCM / CBC-MAC second key /
|
||
// Hash Key input
|
||
#define AES_O_KEY1_6 0x00000020 // Key (LSW for 256-bit key)
|
||
#define AES_O_KEY1_7 0x00000024 // Key (MSW for 256-bit key)
|
||
#define AES_O_KEY1_4 0x00000028 // Key (LSW for 192-bit key)
|
||
#define AES_O_KEY1_5 0x0000002C // Key (MSW for 192-bit key)
|
||
#define AES_O_KEY1_2 0x00000030 // Key
|
||
#define AES_O_KEY1_3 0x00000034 // Key (MSW for 128-bit key)
|
||
#define AES_O_KEY1_0 0x00000038 // Key (LSW for 128-bit key)
|
||
#define AES_O_KEY1_1 0x0000003C // Key
|
||
#define AES_O_IV_IN_0 0x00000040 // Initialization Vector input
|
||
// (LSW)
|
||
#define AES_O_IV_IN_1 0x00000044 // Initialization vector input
|
||
#define AES_O_IV_IN_2 0x00000048 // Initialization vector input
|
||
#define AES_O_IV_IN_3 0x0000004C // Initialization Vector input
|
||
// (MSW)
|
||
#define AES_O_CTRL 0x00000050 // register determines the mode of
|
||
// operation of the AES Engine
|
||
#define AES_O_C_LENGTH_0 0x00000054 // Crypto data length registers
|
||
// (LSW and MSW) store the
|
||
// cryptographic data length in
|
||
// bytes for all modes. Once
|
||
// processing with this context is
|
||
// started@@ this length decrements
|
||
// to zero. Data lengths up to (2^61
|
||
// – 1) bytes are allowed. For GCM@@
|
||
// any value up to 2^36 - 32 bytes
|
||
// can be used. This is because a
|
||
// 32-bit counter mode is used; the
|
||
// maximum number of 128-bit blocks
|
||
// is 2^32 – 2@@ resulting in a
|
||
// maximum number of bytes of 2^36 -
|
||
// 32. A write to this register
|
||
// triggers the engine to start
|
||
// using this context. This is valid
|
||
// for all modes except GCM and CCM.
|
||
// Note that for the combined
|
||
// modes@@ this length does not
|
||
// include the authentication only
|
||
// data; the authentication length
|
||
// is specified in the
|
||
// AES_AUTH_LENGTH register below.
|
||
// All modes must have a length > 0.
|
||
// For the combined modes@@ it is
|
||
// allowed to have one of the
|
||
// lengths equal to zero. For the
|
||
// basic encryption modes
|
||
// (ECB/CBC/CTR/ICM/CFB128) it is
|
||
// allowed to program zero to the
|
||
// length field; in that case the
|
||
// length is assumed infinite. All
|
||
// data must be byte (8-bit)
|
||
// aligned; bit aligned data streams
|
||
// are not supported by the AES
|
||
// Engine. For a Host read
|
||
// operation@@ these registers
|
||
// return all-zeroes.
|
||
#define AES_O_C_LENGTH_1 0x00000058 // Crypto data length registers
|
||
// (LSW and MSW) store the
|
||
// cryptographic data length in
|
||
// bytes for all modes. Once
|
||
// processing with this context is
|
||
// started@@ this length decrements
|
||
// to zero. Data lengths up to (2^61
|
||
// – 1) bytes are allowed. For GCM@@
|
||
// any value up to 2^36 - 32 bytes
|
||
// can be used. This is because a
|
||
// 32-bit counter mode is used; the
|
||
// maximum number of 128-bit blocks
|
||
// is 2^32 – 2@@ resulting in a
|
||
// maximum number of bytes of 2^36 -
|
||
// 32. A write to this register
|
||
// triggers the engine to start
|
||
// using this context. This is valid
|
||
// for all modes except GCM and CCM.
|
||
// Note that for the combined
|
||
// modes@@ this length does not
|
||
// include the authentication only
|
||
// data; the authentication length
|
||
// is specified in the
|
||
// AES_AUTH_LENGTH register below.
|
||
// All modes must have a length > 0.
|
||
// For the combined modes@@ it is
|
||
// allowed to have one of the
|
||
// lengths equal to zero. For the
|
||
// basic encryption modes
|
||
// (ECB/CBC/CTR/ICM/CFB128) it is
|
||
// allowed to program zero to the
|
||
// length field; in that case the
|
||
// length is assumed infinite. All
|
||
// data must be byte (8-bit)
|
||
// aligned; bit aligned data streams
|
||
// are not supported by the AES
|
||
// Engine. For a Host read
|
||
// operation@@ these registers
|
||
// return all-zeroes.
|
||
#define AES_O_AUTH_LENGTH 0x0000005C // AAD data length. The
|
||
// authentication length register
|
||
// store the authentication data
|
||
// length in bytes for combined
|
||
// modes only (GCM or CCM) Supported
|
||
// AAD-lengths for CCM are from 0 to
|
||
// (2^16 - 2^8) bytes. For GCM any
|
||
// value up to (2^32 - 1) bytes can
|
||
// be used. Once processing with
|
||
// this context is started@@ this
|
||
// length decrements to zero. A
|
||
// write to this register triggers
|
||
// the engine to start using this
|
||
// context for GCM and CCM. For XTS
|
||
// this register is optionally used
|
||
// to load ‘j’. Loading of ‘j’ is
|
||
// only required if ‘j’ != 0. ‘j’ is
|
||
// a 28-bit value and must be
|
||
// written to bits [31-4] of this
|
||
// register. ‘j’ represents the
|
||
// sequential number of the 128-bit
|
||
// block inside the data unit. For
|
||
// the first block in a unit@@ this
|
||
// value is zero. It is not required
|
||
// to provide a ‘j’ for each new
|
||
// data block within a unit. Note
|
||
// that it is possible to start with
|
||
// a ‘j’ unequal to zero; refer to
|
||
// Table 4 for more details. For a
|
||
// Host read operation@@ these
|
||
// registers return all-zeroes.
|
||
#define AES_O_DATA_IN_0 0x00000060 // Data register to read and write
|
||
// plaintext/ciphertext (MSW)
|
||
#define AES_O_DATA_IN_1 0x00000064 // Data register to read and write
|
||
// plaintext/ciphertext
|
||
#define AES_O_DATA_IN_2 0x00000068 // Data register to read and write
|
||
// plaintext/ciphertext
|
||
#define AES_O_DATA_IN_3 0x0000006C // Data register to read and write
|
||
// plaintext/ciphertext (LSW)
|
||
#define AES_O_TAG_OUT_0 0x00000070
|
||
#define AES_O_TAG_OUT_1 0x00000074
|
||
#define AES_O_TAG_OUT_2 0x00000078
|
||
#define AES_O_TAG_OUT_3 0x0000007C
|
||
#define AES_O_REVISION 0x00000080 // Register AES_REVISION
|
||
#define AES_O_SYSCONFIG 0x00000084 // Register AES_SYSCONFIG.This
|
||
// register configures the DMA
|
||
// signals and controls the IDLE and
|
||
// reset logic
|
||
#define AES_O_SYSSTATUS 0x00000088
|
||
#define AES_O_IRQSTATUS 0x0000008C // This register indicates the
|
||
// interrupt status. If one of the
|
||
// interrupt bits is set the
|
||
// interrupt output will be asserted
|
||
#define AES_O_IRQENABLE 0x00000090 // This register contains an enable
|
||
// bit for each unique interrupt
|
||
// generated by the module. It
|
||
// matches the layout of
|
||
// AES_IRQSTATUS register. An
|
||
// interrupt is enabled when the bit
|
||
// in this register is set to ‘1’.
|
||
// An interrupt that is enabled is
|
||
// propagated to the SINTREQUEST_x
|
||
// output. All interrupts need to be
|
||
// enabled explicitly by writing
|
||
// this register.
|
||
|
||
|
||
|
||
//******************************************************************************
|
||
//
|
||
// The following are defines for the bit fields in the AES_O_KEY2_6 register.
|
||
//
|
||
//******************************************************************************
|
||
#define AES_KEY2_6_KEY_M 0xFFFFFFFF // key data
|
||
#define AES_KEY2_6_KEY_S 0
|
||
//******************************************************************************
|
||
//
|
||
// The following are defines for the bit fields in the AES_O_KEY2_7 register.
|
||
//
|
||
//******************************************************************************
|
||
#define AES_KEY2_7_KEY_M 0xFFFFFFFF // key data
|
||
#define AES_KEY2_7_KEY_S 0
|
||
//******************************************************************************
|
||
//
|
||
// The following are defines for the bit fields in the AES_O_KEY2_4 register.
|
||
//
|
||
//******************************************************************************
|
||
#define AES_KEY2_4_KEY_M 0xFFFFFFFF // key data
|
||
#define AES_KEY2_4_KEY_S 0
|
||
//******************************************************************************
|
||
//
|
||
// The following are defines for the bit fields in the AES_O_KEY2_5 register.
|
||
//
|
||
//******************************************************************************
|
||
#define AES_KEY2_5_KEY_M 0xFFFFFFFF // key data
|
||
#define AES_KEY2_5_KEY_S 0
|
||
//******************************************************************************
|
||
//
|
||
// The following are defines for the bit fields in the AES_O_KEY2_2 register.
|
||
//
|
||
//******************************************************************************
|
||
#define AES_KEY2_2_KEY_M 0xFFFFFFFF // key data
|
||
#define AES_KEY2_2_KEY_S 0
|
||
//******************************************************************************
|
||
//
|
||
// The following are defines for the bit fields in the AES_O_KEY2_3 register.
|
||
//
|
||
//******************************************************************************
|
||
#define AES_KEY2_3_KEY_M 0xFFFFFFFF // key data
|
||
#define AES_KEY2_3_KEY_S 0
|
||
//******************************************************************************
|
||
//
|
||
// The following are defines for the bit fields in the AES_O_KEY2_0 register.
|
||
//
|
||
//******************************************************************************
|
||
#define AES_KEY2_0_KEY_M 0xFFFFFFFF // key data
|
||
#define AES_KEY2_0_KEY_S 0
|
||
//******************************************************************************
|
||
//
|
||
// The following are defines for the bit fields in the AES_O_KEY2_1 register.
|
||
//
|
||
//******************************************************************************
|
||
#define AES_KEY2_1_KEY_M 0xFFFFFFFF // key data
|
||
#define AES_KEY2_1_KEY_S 0
|
||
//******************************************************************************
|
||
//
|
||
// The following are defines for the bit fields in the AES_O_KEY1_6 register.
|
||
//
|
||
//******************************************************************************
|
||
#define AES_KEY1_6_KEY_M 0xFFFFFFFF // key data
|
||
#define AES_KEY1_6_KEY_S 0
|
||
//******************************************************************************
|
||
//
|
||
// The following are defines for the bit fields in the AES_O_KEY1_7 register.
|
||
//
|
||
//******************************************************************************
|
||
#define AES_KEY1_7_KEY_M 0xFFFFFFFF // key data
|
||
#define AES_KEY1_7_KEY_S 0
|
||
//******************************************************************************
|
||
//
|
||
// The following are defines for the bit fields in the AES_O_KEY1_4 register.
|
||
//
|
||
//******************************************************************************
|
||
#define AES_KEY1_4_KEY_M 0xFFFFFFFF // key data
|
||
#define AES_KEY1_4_KEY_S 0
|
||
//******************************************************************************
|
||
//
|
||
// The following are defines for the bit fields in the AES_O_KEY1_5 register.
|
||
//
|
||
//******************************************************************************
|
||
#define AES_KEY1_5_KEY_M 0xFFFFFFFF // key data
|
||
#define AES_KEY1_5_KEY_S 0
|
||
//******************************************************************************
|
||
//
|
||
// The following are defines for the bit fields in the AES_O_KEY1_2 register.
|
||
//
|
||
//******************************************************************************
|
||
#define AES_KEY1_2_KEY_M 0xFFFFFFFF // key data
|
||
#define AES_KEY1_2_KEY_S 0
|
||
//******************************************************************************
|
||
//
|
||
// The following are defines for the bit fields in the AES_O_KEY1_3 register.
|
||
//
|
||
//******************************************************************************
|
||
#define AES_KEY1_3_KEY_M 0xFFFFFFFF // key data
|
||
#define AES_KEY1_3_KEY_S 0
|
||
//******************************************************************************
|
||
//
|
||
// The following are defines for the bit fields in the AES_O_KEY1_0 register.
|
||
//
|
||
//******************************************************************************
|
||
#define AES_KEY1_0_KEY_M 0xFFFFFFFF // key data
|
||
#define AES_KEY1_0_KEY_S 0
|
||
//******************************************************************************
|
||
//
|
||
// The following are defines for the bit fields in the AES_O_KEY1_1 register.
|
||
//
|
||
//******************************************************************************
|
||
#define AES_KEY1_1_KEY_M 0xFFFFFFFF // key data
|
||
#define AES_KEY1_1_KEY_S 0
|
||
//******************************************************************************
|
||
//
|
||
// The following are defines for the bit fields in the AES_O_IV_IN_0 register.
|
||
//
|
||
//******************************************************************************
|
||
#define AES_IV_IN_0_DATA_M 0xFFFFFFFF // IV data
|
||
#define AES_IV_IN_0_DATA_S 0
|
||
//******************************************************************************
|
||
//
|
||
// The following are defines for the bit fields in the AES_O_IV_IN_1 register.
|
||
//
|
||
//******************************************************************************
|
||
#define AES_IV_IN_1_DATA_M 0xFFFFFFFF // IV data
|
||
#define AES_IV_IN_1_DATA_S 0
|
||
//******************************************************************************
|
||
//
|
||
// The following are defines for the bit fields in the AES_O_IV_IN_2 register.
|
||
//
|
||
//******************************************************************************
|
||
#define AES_IV_IN_2_DATA_M 0xFFFFFFFF // IV data
|
||
#define AES_IV_IN_2_DATA_S 0
|
||
//******************************************************************************
|
||
//
|
||
// The following are defines for the bit fields in the AES_O_IV_IN_3 register.
|
||
//
|
||
//******************************************************************************
|
||
#define AES_IV_IN_3_DATA_M 0xFFFFFFFF // IV data
|
||
#define AES_IV_IN_3_DATA_S 0
|
||
//******************************************************************************
|
||
//
|
||
// The following are defines for the bit fields in the AES_O_CTRL register.
|
||
//
|
||
//******************************************************************************
|
||
#define AES_CTRL_CONTEXT_READY \
|
||
0x80000000 // If ‘1’@@ this read-only status
|
||
// bit indicates that the context
|
||
// data registers can be overwritten
|
||
// and the host is permitted to
|
||
// write the next context.
|
||
|
||
#define AES_CTRL_SVCTXTRDY \
|
||
0x40000000 // If ‘1’@@ this read-only status
|
||
// bit indicates that an AES
|
||
// authentication TAG and/or IV
|
||
// block(s) is/are available for the
|
||
// host to retrieve. This bit is
|
||
// only asserted if the
|
||
// ‘save_context’ bit is set to ‘1’.
|
||
// The bit is mutual exclusive with
|
||
// the ‘context_ready’ bit.
|
||
|
||
#define AES_CTRL_SAVE_CONTEXT 0x20000000 // This bit is used to indicate
|
||
// that an authentication TAG or
|
||
// result IV needs to be stored as a
|
||
// result context. If this bit is
|
||
// set@@ context output DMA and/or
|
||
// interrupt will be asserted if the
|
||
// operation is finished and related
|
||
// signals are enabled.
|
||
#define AES_CTRL_CCM_M 0x01C00000 // Defines “M” that indicated the
|
||
// length of the authentication
|
||
// field for CCM operations; the
|
||
// authentication field length
|
||
// equals two times (the value of
|
||
// CCM-M plus one). Note that the
|
||
// AES Engine always returns a
|
||
// 128-bit authentication field@@ of
|
||
// which the M least significant
|
||
// bytes are valid. All values are
|
||
// supported.
|
||
#define AES_CTRL_CCM_S 22
|
||
#define AES_CTRL_CCM_L_M 0x00380000 // Defines “L” that indicated the
|
||
// width of the length field for CCM
|
||
// operations; the length field in
|
||
// bytes equals the value of CMM-L
|
||
// plus one. Supported values for L
|
||
// are (programmed value): 2 (1)@@ 4
|
||
// (3) and 8 (7).
|
||
#define AES_CTRL_CCM_L_S 19
|
||
#define AES_CTRL_CCM 0x00040000 // AES-CCM is selected@@ this is a
|
||
// combined mode@@ using AES for
|
||
// both authentication and
|
||
// encryption. No additional mode
|
||
// selection is required. 0 Other
|
||
// mode selected 1 ccm mode selected
|
||
#define AES_CTRL_GCM_M 0x00030000 // AES-GCM mode is selected.this is
|
||
// a combined mode@@ using the
|
||
// Galois field multiplier GF(2^128)
|
||
// for authentication and AES-CTR
|
||
// mode for encryption@@ the bits
|
||
// specify the GCM mode. 0x0 No
|
||
// operation 0x1 GHASH with H loaded
|
||
// and Y0-encrypted forced to zero
|
||
// 0x2 GHASH with H loaded and
|
||
// Y0-encrypted calculated
|
||
// internally 0x3 Autonomous GHASH
|
||
// (both H and Y0-encrypted
|
||
// calculated internally)
|
||
#define AES_CTRL_GCM_S 16
|
||
#define AES_CTRL_CBCMAC 0x00008000 // AES-CBC MAC is selected@@ the
|
||
// Direction bit must be set to ‘1’
|
||
// for this mode. 0 Other mode
|
||
// selected 1 cbcmac mode selected
|
||
#define AES_CTRL_F9 0x00004000 // AES f9 mode is selected@@ the
|
||
// AES key size must be set to
|
||
// 128-bit for this mode. 0 Other
|
||
// mode selected 1 f9 selected
|
||
#define AES_CTRL_F8 0x00002000 // AES f8 mode is selected@@ the
|
||
// AES key size must be set to
|
||
// 128-bit for this mode. 0 Other
|
||
// mode selected 1 f8 selected
|
||
#define AES_CTRL_XTS_M 0x00001800 // AES-XTS operation is selected;
|
||
// the bits specify the XTS mode.01
|
||
// = Previous/intermediate tweak
|
||
// value and ‘j’ loaded (value is
|
||
// loaded via IV@@ j is loaded via
|
||
// the AAD length register) 0x0 No
|
||
// operation 0x1
|
||
// Previous/intermediate tweak value
|
||
// and ‘j’ loaded (value is loaded
|
||
// via IV@@ j is loaded via the AAD
|
||
// length register) 0x2 Key2@@ i and
|
||
// j loaded (i is loaded via IV@@ j
|
||
// is loaded via the AAD length
|
||
// register) 0x3 Key2 and i loaded@@
|
||
// j=0 (i is loaded via IV)
|
||
#define AES_CTRL_XTS_S 11
|
||
#define AES_CTRL_CFB 0x00000400 // full block AES cipher feedback
|
||
// mode (CFB128) is selected. 0
|
||
// other mode selected 1 cfb
|
||
// selected
|
||
#define AES_CTRL_ICM 0x00000200 // AES integer counter mode (ICM)
|
||
// is selected@@ this is a counter
|
||
// mode with a 16-bit wide counter.
|
||
// 0 Other mode selected. 1 ICM mode
|
||
// selected
|
||
#define AES_CTRL_CTR_WIDTH_M 0x00000180 // Specifies the counter width for
|
||
// AES-CTR mode 0x0 Counter is 32
|
||
// bits 0x1 Counter is 64 bits 0x2
|
||
// Counter is 128 bits 0x3 Counter
|
||
// is 192 bits
|
||
#define AES_CTRL_CTR_WIDTH_S 7
|
||
#define AES_CTRL_CTR 0x00000040 // Tthis bit must also be set for
|
||
// GCM and CCM@@ when
|
||
// encryption/decryption is
|
||
// required. 0 Other mode selected 1
|
||
// Counter mode
|
||
#define AES_CTRL_MODE 0x00000020 // ecb/cbc mode 0 ecb mode 1 cbc
|
||
// mode
|
||
#define AES_CTRL_KEY_SIZE_M 0x00000018 // key size 0x0 reserved 0x1 Key is
|
||
// 128 bits. 0x2 Key is 192 bits 0x3
|
||
// Key is 256
|
||
#define AES_CTRL_KEY_SIZE_S 3
|
||
#define AES_CTRL_DIRECTION 0x00000004 // If set to ‘1’ an encrypt
|
||
// operation is performed. If set to
|
||
// ‘0’ a decrypt operation is
|
||
// performed. Read 0 decryption is
|
||
// selected Read 1 Encryption is
|
||
// selected
|
||
#define AES_CTRL_INPUT_READY 0x00000002 // If ‘1’@@ this read-only status
|
||
// bit indicates that the 16-byte
|
||
// input buffer is empty@@ and the
|
||
// host is permitted to write the
|
||
// next block of data.
|
||
#define AES_CTRL_OUTPUT_READY 0x00000001 // If ‘1’@@ this read-only status
|
||
// bit indicates that an AES output
|
||
// block is available for the host
|
||
// to retrieve.
|
||
//******************************************************************************
|
||
//
|
||
// The following are defines for the bit fields in the
|
||
// AES_O_C_LENGTH_0 register.
|
||
//
|
||
//******************************************************************************
|
||
//******************************************************************************
|
||
//
|
||
// The following are defines for the bit fields in the
|
||
// AES_O_C_LENGTH_1 register.
|
||
//
|
||
//******************************************************************************
|
||
#define AES_C_LENGTH_1_LENGTH_M \
|
||
0x1FFFFFFF // Data length (MSW) length
|
||
// registers (LSW and MSW) store the
|
||
// cryptographic data length in
|
||
// bytes for all modes. Once
|
||
// processing with this context is
|
||
// started@@ this length decrements
|
||
// to zero. Data lengths up to (2^61
|
||
// – 1) bytes are allowed. For GCM@@
|
||
// any value up to 2^36 - 32 bytes
|
||
// can be used. This is because a
|
||
// 32-bit counter mode is used; the
|
||
// maximum number of 128-bit blocks
|
||
// is 2^32 – 2@@ resulting in a
|
||
// maximum number of bytes of 2^36 -
|
||
// 32. A write to this register
|
||
// triggers the engine to start
|
||
// using this context. This is valid
|
||
// for all modes except GCM and CCM.
|
||
// Note that for the combined
|
||
// modes@@ this length does not
|
||
// include the authentication only
|
||
// data; the authentication length
|
||
// is specified in the
|
||
// AES_AUTH_LENGTH register below.
|
||
// All modes must have a length > 0.
|
||
// For the combined modes@@ it is
|
||
// allowed to have one of the
|
||
// lengths equal to zero. For the
|
||
// basic encryption modes
|
||
// (ECB/CBC/CTR/ICM/CFB128) it is
|
||
// allowed to program zero to the
|
||
// length field; in that case the
|
||
// length is assumed infinite. All
|
||
// data must be byte (8-bit)
|
||
// aligned; bit aligned data streams
|
||
// are not supported by the AES
|
||
// Engine. For a Host read
|
||
// operation@@ these registers
|
||
// return all-zeroes.
|
||
|
||
#define AES_C_LENGTH_1_LENGTH_S 0
|
||
//******************************************************************************
|
||
//
|
||
// The following are defines for the bit fields in the
|
||
// AES_O_AUTH_LENGTH register.
|
||
//
|
||
//******************************************************************************
|
||
#define AES_AUTH_LENGTH_AUTH_M \
|
||
0xFFFFFFFF // data
|
||
|
||
#define AES_AUTH_LENGTH_AUTH_S 0
|
||
//******************************************************************************
|
||
//
|
||
// The following are defines for the bit fields in the AES_O_DATA_IN_0 register.
|
||
//
|
||
//******************************************************************************
|
||
#define AES_DATA_IN_0_DATA_M 0xFFFFFFFF // Data to encrypt/decrypt
|
||
#define AES_DATA_IN_0_DATA_S 0
|
||
//******************************************************************************
|
||
//
|
||
// The following are defines for the bit fields in the AES_O_DATA_IN_1 register.
|
||
//
|
||
//******************************************************************************
|
||
#define AES_DATA_IN_1_DATA_M 0xFFFFFFFF // Data to encrypt/decrypt
|
||
#define AES_DATA_IN_1_DATA_S 0
|
||
//******************************************************************************
|
||
//
|
||
// The following are defines for the bit fields in the AES_O_DATA_IN_2 register.
|
||
//
|
||
//******************************************************************************
|
||
#define AES_DATA_IN_2_DATA_M 0xFFFFFFFF // Data to encrypt/decrypt
|
||
#define AES_DATA_IN_2_DATA_S 0
|
||
//******************************************************************************
|
||
//
|
||
// The following are defines for the bit fields in the AES_O_DATA_IN_3 register.
|
||
//
|
||
//******************************************************************************
|
||
#define AES_DATA_IN_3_DATA_M 0xFFFFFFFF // Data to encrypt/decrypt
|
||
#define AES_DATA_IN_3_DATA_S 0
|
||
//******************************************************************************
|
||
//
|
||
// The following are defines for the bit fields in the AES_O_TAG_OUT_0 register.
|
||
//
|
||
//******************************************************************************
|
||
#define AES_TAG_OUT_0_HASH_M 0xFFFFFFFF // Hash result (MSW)
|
||
#define AES_TAG_OUT_0_HASH_S 0
|
||
//******************************************************************************
|
||
//
|
||
// The following are defines for the bit fields in the AES_O_TAG_OUT_1 register.
|
||
//
|
||
//******************************************************************************
|
||
#define AES_TAG_OUT_1_HASH_M 0xFFFFFFFF // Hash result (MSW)
|
||
#define AES_TAG_OUT_1_HASH_S 0
|
||
//******************************************************************************
|
||
//
|
||
// The following are defines for the bit fields in the AES_O_TAG_OUT_2 register.
|
||
//
|
||
//******************************************************************************
|
||
#define AES_TAG_OUT_2_HASH_M 0xFFFFFFFF // Hash result (MSW)
|
||
#define AES_TAG_OUT_2_HASH_S 0
|
||
//******************************************************************************
|
||
//
|
||
// The following are defines for the bit fields in the AES_O_TAG_OUT_3 register.
|
||
//
|
||
//******************************************************************************
|
||
#define AES_TAG_OUT_3_HASH_M 0xFFFFFFFF // Hash result (LSW)
|
||
#define AES_TAG_OUT_3_HASH_S 0
|
||
//******************************************************************************
|
||
//
|
||
// The following are defines for the bit fields in the AES_O_REVISION register.
|
||
//
|
||
//******************************************************************************
|
||
#define AES_REVISION_SCHEME_M 0xC0000000
|
||
#define AES_REVISION_SCHEME_S 30
|
||
#define AES_REVISION_FUNC_M 0x0FFF0000 // Function indicates a software
|
||
// compatible module family. If
|
||
// there is no level of software
|
||
// compatibility a new Func number
|
||
// (and hence REVISION) should be
|
||
// assigned.
|
||
#define AES_REVISION_FUNC_S 16
|
||
#define AES_REVISION_R_RTL_M 0x0000F800 // RTL Version (R)@@ maintained by
|
||
// IP design owner. RTL follows a
|
||
// numbering such as X.Y.R.Z which
|
||
// are explained in this table. R
|
||
// changes ONLY when: (1) PDS
|
||
// uploads occur which may have been
|
||
// due to spec changes (2) Bug fixes
|
||
// occur (3) Resets to '0' when X or
|
||
// Y changes. Design team has an
|
||
// internal 'Z' (customer invisible)
|
||
// number which increments on every
|
||
// drop that happens due to DV and
|
||
// RTL updates. Z resets to 0 when R
|
||
// increments.
|
||
#define AES_REVISION_R_RTL_S 11
|
||
#define AES_REVISION_X_MAJOR_M \
|
||
0x00000700 // Major Revision (X)@@ maintained
|
||
// by IP specification owner. X
|
||
// changes ONLY when: (1) There is a
|
||
// major feature addition. An
|
||
// example would be adding Master
|
||
// Mode to Utopia Level2. The Func
|
||
// field (or Class/Type in old PID
|
||
// format) will remain the same. X
|
||
// does NOT change due to: (1) Bug
|
||
// fixes (2) Change in feature
|
||
// parameters.
|
||
|
||
#define AES_REVISION_X_MAJOR_S 8
|
||
#define AES_REVISION_CUSTOM_M 0x000000C0
|
||
#define AES_REVISION_CUSTOM_S 6
|
||
#define AES_REVISION_Y_MINOR_M \
|
||
0x0000003F // Minor Revision (Y)@@ maintained
|
||
// by IP specification owner. Y
|
||
// changes ONLY when: (1) Features
|
||
// are scaled (up or down).
|
||
// Flexibility exists in that this
|
||
// feature scalability may either be
|
||
// represented in the Y change or a
|
||
// specific register in the IP that
|
||
// indicates which features are
|
||
// exactly available. (2) When
|
||
// feature creeps from Is-Not list
|
||
// to Is list. But this may not be
|
||
// the case once it sees silicon; in
|
||
// which case X will change. Y does
|
||
// NOT change due to: (1) Bug fixes
|
||
// (2) Typos or clarifications (3)
|
||
// major functional/feature
|
||
// change/addition/deletion. Instead
|
||
// these changes may be reflected
|
||
// via R@@ S@@ X as applicable. Spec
|
||
// owner maintains a
|
||
// customer-invisible number 'S'
|
||
// which changes due to: (1)
|
||
// Typos/clarifications (2) Bug
|
||
// documentation. Note that this bug
|
||
// is not due to a spec change but
|
||
// due to implementation.
|
||
// Nevertheless@@ the spec tracks
|
||
// the IP bugs. An RTL release (say
|
||
// for silicon PG1.1) that occurs
|
||
// due to bug fix should document
|
||
// the corresponding spec number
|
||
// (X.Y.S) in its release notes.
|
||
|
||
#define AES_REVISION_Y_MINOR_S 0
|
||
//******************************************************************************
|
||
//
|
||
// The following are defines for the bit fields in the AES_O_SYSCONFIG register.
|
||
//
|
||
//******************************************************************************
|
||
#define AES_SYSCONFIG_MACONTEXT_OUT_ON_DATA_OUT \
|
||
0x00000200 // If set to '1' the two context
|
||
// out requests
|
||
// (dma_req_context_out_en@@ Bit [8]
|
||
// above@@ and context_out interrupt
|
||
// enable@@ Bit [3] of AES_IRQENABLE
|
||
// register) are mapped on the
|
||
// corresponding data output request
|
||
// bit. In this case@@ the original
|
||
// ‘context out’ bit values are
|
||
// ignored.
|
||
|
||
#define AES_SYSCONFIG_DMA_REQ_CONTEXT_OUT_EN \
|
||
0x00000100 // If set to ‘1’@@ the DMA context
|
||
// output request is enabled (for
|
||
// context data out@@ e.g. TAG for
|
||
// authentication modes). 0 Dma
|
||
// disabled 1 Dma enabled
|
||
|
||
#define AES_SYSCONFIG_DMA_REQ_CONTEXT_IN_EN \
|
||
0x00000080 // If set to ‘1’@@ the DMA context
|
||
// request is enabled. 0 Dma
|
||
// disabled 1 Dma enabled
|
||
|
||
#define AES_SYSCONFIG_DMA_REQ_DATA_OUT_EN \
|
||
0x00000040 // If set to ‘1’@@ the DMA output
|
||
// request is enabled. 0 Dma
|
||
// disabled 1 Dma enabled
|
||
|
||
#define AES_SYSCONFIG_DMA_REQ_DATA_IN_EN \
|
||
0x00000020 // If set to ‘1’@@ the DMA input
|
||
// request is enabled. 0 Dma
|
||
// disabled 1 Dma enabled
|
||
|
||
//******************************************************************************
|
||
//
|
||
// The following are defines for the bit fields in the AES_O_SYSSTATUS register.
|
||
//
|
||
//******************************************************************************
|
||
#define AES_SYSSTATUS_RESETDONE \
|
||
0x00000001
|
||
|
||
//******************************************************************************
|
||
//
|
||
// The following are defines for the bit fields in the AES_O_IRQSTATUS register.
|
||
//
|
||
//******************************************************************************
|
||
#define AES_IRQSTATUS_CONTEXT_OUT \
|
||
0x00000008 // This bit indicates
|
||
// authentication tag (and IV)
|
||
// interrupt(s) is/are active and
|
||
// triggers the interrupt output.
|
||
|
||
#define AES_IRQSTATUS_DATA_OUT \
|
||
0x00000004 // This bit indicates data output
|
||
// interrupt is active and triggers
|
||
// the interrupt output.
|
||
|
||
#define AES_IRQSTATUS_DATA_IN 0x00000002 // This bit indicates data input
|
||
// interrupt is active and triggers
|
||
// the interrupt output.
|
||
#define AES_IRQSTATUS_CONTEX_IN \
|
||
0x00000001 // This bit indicates context
|
||
// interrupt is active and triggers
|
||
// the interrupt output.
|
||
|
||
//******************************************************************************
|
||
//
|
||
// The following are defines for the bit fields in the AES_O_IRQENABLE register.
|
||
//
|
||
//******************************************************************************
|
||
#define AES_IRQENABLE_CONTEXT_OUT \
|
||
0x00000008 // This bit indicates
|
||
// authentication tag (and IV)
|
||
// interrupt(s) is/are active and
|
||
// triggers the interrupt output.
|
||
|
||
#define AES_IRQENABLE_DATA_OUT \
|
||
0x00000004 // This bit indicates data output
|
||
// interrupt is active and triggers
|
||
// the interrupt output.
|
||
|
||
#define AES_IRQENABLE_DATA_IN 0x00000002 // This bit indicates data input
|
||
// interrupt is active and triggers
|
||
// the interrupt output.
|
||
#define AES_IRQENABLE_CONTEX_IN \
|
||
0x00000001 // This bit indicates context
|
||
// interrupt is active and triggers
|
||
// the interrupt output.
|
||
|
||
|
||
|
||
|
||
#endif // __HW_AES_H__
|