The AMP audio skin ================== Soldering and using the AMP audio skin. .. image:: img/skin_amp_1.jpg :alt: AMP skin :width: 250px .. image:: img/skin_amp_2.jpg :alt: AMP skin :width: 250px The following video shows how to solder the headers, microphone and speaker onto the AMP skin. .. raw:: html For circuit schematics and datasheets for the components on the skin see :ref:`hardware_index`. Example code ------------ The AMP skin has a speaker which is connected to ``DAC(1)`` via a small power amplifier. The volume of the amplifier is controlled by a digital potentiometer, which is an I2C device with address 46 on the ``IC2(1)`` bus. To set the volume, define the following function:: import pyb def volume(val): pyb.I2C(1, pyb.I2C.MASTER).mem_write(val, 46, 0) Then you can do:: >>> volume(0) # minimum volume >>> volume(127) # maximum volume To play a sound, use the ``write_timed`` method of the ``DAC`` object. For example:: import math from pyb import DAC # create a buffer containing a sine-wave buf = bytearray(100) for i in range(len(buf)): buf[i] = 128 + int(127 * math.sin(2 * math.pi * i / len(buf))) # output the sine-wave at 400Hz dac = DAC(1) dac.write_timed(buf, 400 * len(buf), mode=DAC.CIRCULAR) You can also play WAV files using the Python ``wave`` module. You can get the wave module `here `_ and you will also need the chunk module available `here `_. Put these on your pyboard (either on the flash or the SD card in the top-level directory). You will need an 8-bit WAV file to play, such as `this one `_. Then you can do:: >>> import wave >>> from pyb import DAC >>> dac = DAC(1) >>> f = wave.open('test.wav') >>> dac.write_timed(f.readframes(f.getnframes()), f.getframerate()) This should play the WAV file.