CONFIG_BUILD_OUTPUT_BIN=y CONFIG_REBOOT=y CONFIG_STDOUT_CONSOLE=y CONFIG_CONSOLE_HANDLER=y CONFIG_UART_CONSOLE_DEBUG_SERVER_HOOKS=y CONFIG_CONSOLE_SUBSYS=y CONFIG_CONSOLE_GETCHAR=y CONFIG_CONSOLE_GETCHAR_BUFSIZE=128 CONFIG_CONSOLE_PUTCHAR_BUFSIZE=128 CONFIG_NEWLIB_LIBC=y CONFIG_FLOAT=y CONFIG_MAIN_STACK_SIZE=4736 # Enable sensor subsystem (doesn't add code if not used). # Specific sensors should be enabled per-board. CONFIG_SENSOR=y # Networking config CONFIG_NETWORKING=y CONFIG_NET_IPV4=y CONFIG_NET_IPV6=y CONFIG_NET_UDP=y CONFIG_NET_TCP=y CONFIG_NET_SOCKETS=y CONFIG_TEST_RANDOM_GENERATOR=y CONFIG_NET_CONFIG_SETTINGS=y CONFIG_NET_CONFIG_INIT_TIMEOUT=3 CONFIG_NET_CONFIG_NEED_IPV6=y CONFIG_NET_CONFIG_NEED_IPV4=y # DNS CONFIG_DNS_RESOLVER=y CONFIG_DNS_RESOLVER_ADDITIONAL_QUERIES=2 CONFIG_DNS_SERVER_IP_ADDRESSES=y # Static IP addresses CONFIG_NET_CONFIG_MY_IPV6_ADDR="2001:db8::1" CONFIG_NET_CONFIG_MY_IPV4_ADDR="192.0.2.1" CONFIG_NET_CONFIG_MY_IPV4_GW="192.0.2.2" CONFIG_DNS_SERVER1="192.0.2.2" # DHCP configuration. Until DHCP address is assigned, # static configuration above is used instead. CONFIG_NET_DHCPV4=y # Diagnostics and debugging # Required for zephyr.stack_analyze() CONFIG_THREAD_ANALYZER=y CONFIG_THREAD_ANALYZER_USE_PRINTK=y CONFIG_THREAD_NAME=y # Required for usocket.pkt_get_info() CONFIG_NET_BUF_POOL_USAGE=y # Required for usocket.shell_*() #CONFIG_NET_SHELL=y # Uncomment to enable "INFO" level net_buf logging #CONFIG_NET_LOG=y #CONFIG_NET_DEBUG_NET_BUF=y # Change to 4 for "DEBUG" level #CONFIG_SYS_LOG_NET_LEVEL=3