mirror
/
micropython
kopia lustrzana https://github.com/micropython/micropython
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
4 358 Commity
3 Gałęzie
5 Tagi
338 MiB
Wykres commitów

67 Commity (d292a81e95bd558f3902f88fa4d6d5641a4aa388)

Autor SHA1 Wiadomość Data
Daniel Campora 11d21081b4 cc3200: Rework SD API. Increase heap to avoid malloc failures. 2015-08-16 20:17:58 +02:00
Daniel Campora 34c290b678 cc3200: Rename SPI nss param to cs. 
The nss param in the pyboard has a different meaning that doesn't
apply to the WiPy.
 2015-08-16 20:17:55 +02:00
Daniel Campora ea5061e409 cc3200: Improve callback API. 
Rename "wakes" param to "wake_from" and make "value" an object
instead of an integer.
 2015-08-16 20:17:52 +02:00
Daniel Campora 7027fd5343 cc3200: Make ADC API compatible with the pyboard. 2015-08-10 23:42:05 +02:00
Daniel Campora 00c4d6562e cc3200: Add nic.iwconfig() to set/get WLAN configuration. 
Changes are based on this post:
https://github.com/micropython/micropython/issues/876#issuecomment-115255551

The constructor can optionally take the same params of iwconfig in
order to configure WiFi when creating the object. Params are
keyworkd only. The WiPy accepts:

- mode (int -> WLAN.AP or WLAN.STA)
- ssdi (string)
- security (int -> WLAN.OPEN, WLAN.WEP, WLAN.WPA, WLAN.WPA2)
- key (string)
- channel (int (1-11))
- antenna (int -> WLAN.INTERNAL, WLAN.EXTERNAL)
 2015-08-09 19:22:12 +02:00
Daniel Campora c6926c374d cc3200: Make I2C and SPI API the same as in stmhal. 2015-08-02 20:22:15 +02:00
Daniel Campora 9a348fc840 cc3200: Add socket.makefile() 2015-07-30 00:43:10 +02:00
Daniel Campora f22b35e4e5 cc3200: Add socket.sendall() (aliases to send()). 
Simplelink's socket send checks for the size of the packet and sends
it in chunks if the size is too large.
 2015-07-17 11:38:01 +02:00
Daniel Campora fa47bebfbc cc3200: Add struct weak link for ustruct. 2015-07-10 11:37:46 +02:00
Daniel Campora c030e77861 cc3200: Enable base64 methods from modubinascii. 2015-07-04 16:33:54 +02:00
Daniel Campora 9a65fa304c cc3200: Add modussl, ssl sockets subclassed from normal sockets. 
Stream methods were added to normal sockets as in the unix port.
 2015-07-02 16:30:00 +02:00
Daniel Campora f522849a4d cc3200: Add socket.timeout and socket.error exceptions. 2015-07-02 11:53:15 +02:00
Daniel Campora 813b581127 cc3200: Add `Pin.name()` method. 2015-06-28 14:14:22 +02:00
Daniel Campora b630de1103 cc3200: Rename os.mkdisk() to os.mkfs(). 2015-06-10 23:35:45 +02:00
Daniel Campora 1811c6bccf cc3200: Remove Timer.AB constant. 
Timer.A and Timer.B can be ORed for this purpose.
 2015-06-10 23:35:43 +02:00
Daniel Campora 95cc1ff542 cc3200: Re-name pyb.hard_reset() to pyb.reset(). 2015-06-10 23:35:40 +02:00
Daniel Campora 3319780e96 cc3200: Add sendbreak method to the UART. 2015-06-10 23:35:35 +02:00
Daniel Campora 8a6d93aeed cc3200: Make UART API more similar to stmhal. 2015-06-10 23:35:33 +02:00
Daniel Campora a3acaa000c cc3200: Add antenna selection feature to WLAN. 2015-06-07 00:06:27 +02:00
Daniel Campora cc20482aa9 cc3200: Add method to configure the servers timeout. 
With network.server_timeout(secs) the timeout can be changed.
The default value is 300 secs. Minimmum accpeted is 5 secs.
Without params the function returns the current configured timeout.
 2015-06-03 17:31:21 +02:00
Daniel Campora 84d11b5e53 cc3200: Add period set method to the Timer class. 2015-05-29 15:54:46 +02:00
Daniel Campora 622f241317 cc3200: Rename pyb.reset() to pyb.hard_reset() and add pyb.unique_id(). 2015-05-29 10:22:20 +02:00
Daniel Campora 2abb58d758 cc3200: Rename Pin.get_config() to Pin.info(). 2015-05-28 13:10:46 +02:00
Daniel Campora 8096be089e cc3200: Add make_new method to the WDT. 2015-05-27 09:45:25 +02:00
Daniel Campora 124aa000af cc3200: Use polarity and phase instead of submode in the SPI construct. 2015-05-26 11:30:48 +02:00
Daniel Campora 2dd47239de cc3200: Make API more similar to stmhal. 
In general the changes are:

1. Peripheral (UART, SPI, ADC, I2C, Timer) IDs start from 1, not zero.
2. Make I2C and SPI require the ID even when there's only one bus.
3. Make I2C and SPI accept 'mode' parameter even though only MASTER
   is supported.
 2015-05-25 21:47:19 +02:00
Daniel Campora ed56b0baba cc3200: Finally unlock the full wake on WLAN feature set. 2015-05-22 19:53:33 +02:00
Daniel Campora 18030bd85d cc3200: Add own ubinascii module. 
The reason to have our owm ubinascii module is so that later we
can add crc32 support using the hardware engine.
 2015-05-22 09:56:11 +02:00
Daniel Campora 7506db4ccb cc3200: Remove uhashlib.hexdigest(). 2015-05-21 18:51:57 +02:00
Daniel Campora e800db562f cc3200: Add uhashlib. Supports SHA1 and SHA256. 2015-05-20 11:44:24 +02:00
Daniel Campora 56053c37cf cc3200: Rewrite WLAN.ifconfig(). Add WLAN.info() and WLAN.connections(). 2015-05-20 11:44:21 +02:00
Daniel Campora c27dc38e85 cc3200: Re-name 'intmode' to 'mode' in the callback API. 2015-05-17 14:49:17 +02:00
Daniel Campora 8e611e8414 cc3200: Add Timer module. Supports free running, PWM and capture modes. 2015-05-17 12:34:49 +02:00
Daniel Campora 2b62707051 cc3200: Add os.rename() 2015-05-17 12:22:17 +02:00
Daniel Campora 2bdefea9d6 cc3200: Enable MICROPY_MODULE_WEAK_LINKS. 2015-05-07 12:19:31 +02:00
Daniel Campora 8c8d7f3c60 cc3200: Clean up pyb.Pin 
Remove unused and unneeded functions, also create Pin.get_config() that
returns the whole configuration of the pin.

This reduces code size by ~500 bytes.
 2015-05-03 11:26:56 +02:00
Daniel Campora e4c899a08c cc3200: WLAN.ifconfig returns an attrtuple instead of a dictionary. 2015-05-03 11:26:25 +02:00
Daniel Campora f54bdecff2 cc3200: Implement Sleep.wake_reason() 2015-05-03 11:21:14 +02:00
Daniel Campora d11317bcab cc3200: Make WLAN scan results a list of attrtupple. 
Each result is displayed like this:

ssid='MySSID', bssid=b'\xc0J\x00z.\xcc', security=2, channel=None, rssi=-74

The CC3200 doesn't provide channel info, that why is 'None'.
 2015-04-29 00:04:01 +02:00
Daniel Campora f81684141e cc3200: Implement os.uname() to get details of the OS and hardware. 2015-04-29 00:03:56 +02:00
Daniel Campora f7a26472af cc3200: Add IPPROTO_SEC to be able to create secure sockets. 2015-04-14 01:57:27 +02:00
Daniel Campora c69b4310c8 cc3200: Add WLAN.config_ip(). 
This new method allows to assign an static IP to the device.
 2015-04-13 00:02:56 +02:00
Daniel Campora 6e25d955f4 cc3200: Enable long filename support in FatFS. 
This has implications all over the place. I have to admit that
you can instantly see that usability improves, but it costs 3K.
At the same time I took the oportunity to rename the '/SFLASH'
drive to '/flash' which improves compatibility with the pyboard.
 2015-04-11 13:35:05 +02:00
Daniel Campora d460a30711 cc3200: Add specific version file for the CC3200 port. 
Current version has been numbered as 0.9.0 since Timers/PWM support
is still missing.
 2015-03-31 14:34:09 +02:00
Daniel Campora 2d717ad97a cc3200: Add callback support to the UART for RX interrupts. 2015-03-26 10:28:43 +01:00
Daniel Campora e909e38871 cc3200: Remove superflous parameters from the SPI API. 2015-03-26 10:28:41 +01:00
Daniel Campora 7f41f650de cc3200: Remove superflous params from the I2C API. 2015-03-25 16:56:14 +01:00
danicampora cd9bc14c8f cc3200: Add SPI module. 
Only MASTER mode is supported. Transfer width is configurable to
8, 16 or 32 bits.
 2015-03-21 11:26:47 +01:00
danicampora f8ee88bbe0 cc3200: Move server methods from WLAN to the network module. 2015-03-19 17:08:25 +01:00
danicampora 963d7c7ee6 cc3200: Refactor I2C. Remove all references to SLAVE mode. 2015-03-18 21:54:41 +01:00